ftp_nb_put

(PHP 4 >= 4.3.0, PHP 5, PHP 7, PHP 8)

ftp_nb_put — Lädt eine Datei auf den FTP-Server (nicht-blockierend)

Beschreibung

ftp_nb_put(
    FTP\Connection $ftp,
    string $remote_filename,
    string $local_filename,
    int $mode = FTP_BINARY,
    int $offset = 0
): int|false

ftp_nb_put() speichert eine lokale Datei auf dem FTP-Server.

Der Unterschied zwischen dieser Funktion und ftp_put() ist, dass diese Funktion die Datei asynchron hochlädt, sodass Ihr Programm noch andere Operationen durchführen kann, während die Datei hochgeladen wird.

Parameter-Liste

ftp: Eine FTP\Connection-Instanz.
remote_filename: Der Pfad zur Datei auf dem Server.
local_filename: Der Pfad zur lokalen Datei.
mode: Der Transfer-Modus. Muss entweder FTP_ASCII oder FTP_BINARY sein.
offset: Die Startposition für den Upload in der Datei auf dem Server.

Rückgabewerte

Gibt FTP_FAILED, FTP_FINISHED oder FTP_MOREDATA zurück, oder false, wenn die lokale Datei nicht geöffnet werden kann.

Changelog

Version	Beschreibung
8.1.0	Der Parameter `ftp` erwartet nun eine FTP\Connection-Instanz; vorher wurde eine Ressource erwartet.
7.3.0	Der Parameter `mode` ist nun optional. Zuvor war er verpflichtend.

Beispiele

Beispiel #1 ftp_nb_put()-Beispiel

<?php

// Initialisiere den Upload
$ret = ftp_nb_put($ftp, "test.remote", "test.local", FTP_BINARY);
while ($ret == FTP_MOREDATA) {

   // Irgendwas machen
   echo ".";

   // Upload fortsetzen
   $ret = ftp_nb_continue($ftp);
}
if ($ret != FTP_FINISHED) {
   echo "Beim Transfer trat ein Fehler auf";
   exit(1);
}
?>

Beispiel #2 Einen Upload mit ftp_nb_put() wieder aufnehmen

<?php

// Initialisieren
$ret = ftp_nb_put($ftp, "test.remote", "test.local",
                      FTP_BINARY, ftp_size("test.remote"));
// ODER: $ret = ftp_nb_put($ftp, "test.remote", "test.local",
//                           FTP_BINARY, FTP_AUTORESUME);


while ($ret == FTP_MOREDATA) {

   // Irgendwas machen
   echo ".";

   // Upload fortsetzen
   $ret = ftp_nb_continue($ftp);
}
if ($ret != FTP_FINISHED) {
   echo "Beim Transfer trat ein Fehler auf";
   exit(1);
}
?>

Siehe auch

ftp_nb_fput() - Lädt eine geöffnete Datei auf den FTP-Server (nicht blockierend)
ftp_nb_continue() - Nimmt die Übertragung einer Datei wieder auf (nicht-blockierend)
ftp_put() - Lädt eine Datei auf einen FTP-Server
ftp_fput() - Überträgt eine geöffnete Datei auf einen FTP-Server

add a note

User Contributed Notes 7 notes

down

manu at manux dot org ¶

19 years ago


When using non blocking functions if you try to disconnect while your non blocking operation is in progress the disconnect command will not work until the operation is not finished.

down

Ariel asphp at dsgml dot com ¶

18 years ago


Don't add a sleep() inside the loop. If you do you will severely slow down the upload.

In my tests, each time through the loop it send about 2.5K, looping about 220 times per second. (Which is very little.)

You won't necessarily get the same numbers as me per loop, but clearly PHP does it's own management of the loop so that you don't consume all the CPU on the server.

down

ted at hostleft dot com ¶

19 years ago


If you receive an error like:  

Warning:  ftp_nb_put(): Unable to service PORT commands in /path/to/file.php on line 27

verify whether you need to be in PASV mode. You can go into PASV mode by declaring

>  ftp_pasv($cnx,TRUE);

down

WebSee.ru ¶

15 years ago


How to realize the possibility of transferring data from one FTP-server to another via FXP:



<?php

// ...



$ansver = ftp_raw($ftp_conn1, 'PASV');



if (intval($ansver[0]) == 227) {

    ftp_raw($ftp_conn2, 'PORT '.substr($ansver[0], $n = strpos($ansver[0], '(') + 1, strpos($m[0], ')', $n) - $n));

    ftp_raw($ftp_conn1, 'STOR '.$filename); // need asynchronously (non-blocking)

    ftp_raw($ftp_conn2, 'RETR '.$filename);

}

?>

down

brandon dot farber at gmail dot com ¶

18 years ago


I couldn't see this noted anywhere...

ftp_nb_put apparently takes a much much longer time to upload the file than ftp_put (I haven't done any packet sniffing or logging tests to find out why).  I was using a script, nearly identical to the example above, and a 100KB file had only uploaded 3.99KB after about 8 minutes!  The php script naturally timed out before it was complete.

I changed my function to use ftp_put, got rid of the loop to check FTP_MOREDATA (as you will see in the example above), and the same script uploaded 2.2MB within 30 seconds with no other changes.

If you're using this function instead of ftp_put *purely to try to speed up your script* and it's taking a long time, you might want to try ftp_put instead.

down

-1

parasc at chetu dot com ¶

6 years ago


Hi Everybody,
ftp_put not working in client server, but it working properly on my local  system.
Issue on client server:
Production.ERROR: ftp_put(): I won't open a connection to 172.31.17.181 (only to 52.33.186.63).

My script upload a file from local system to remote server.

Thanks
Paras Chauhan

down

-1

kaiohken1982 at hotmail dot com ¶

17 years ago


Hi, 
I tried to use both ftp_put() and ftp_nb_put() adding the
variable $start = date("Y:m:d h:i:s"); at the begin of the script and the variable $end = date("Y:m:d h:i:s"); at its end, after the file upload function.
With the gprs connection I'm now using and trying to upload a .jpg file of 67,5 kb the time difference between $start and $end was 40 seconds in both cases, so I can suppose that there is no difference between these upload function.
The difference comes if you put anything inside the while ($ftp_upload == FTP_MOREDATA) loop.
I hope this note can help.
Regards

add a note