Edit Report a Bug

    PDOStatement::fetchAll

    (PHP 5 >= 5.1.0, PHP 7, PHP 8, PECL pdo >= 0.1.0)

    PDOStatement::fetchAll — Ruft die verbleibenden Zeilen aus einer Ergebnismenge ab

    Beschreibung

    public PDOStatement::fetchAll(int $mode = PDO::FETCH_DEFAULT): array
    public PDOStatement::fetchAll(int $mode = PDO::FETCH_COLUMN, int $column): array
    public PDOStatement::fetchAll(int $mode = PDO::FETCH_CLASS, string $class, ?array $constructorArgs): array
    public PDOStatement::fetchAll(int $mode = PDO::FETCH_FUNC, callable $callback): array

    Parameter-Liste

    mode

    Legt die Struktur des zurückgegebenen Arrays fest, wie in PDOStatement::fetch() dokumentiert. Voreingestellt ist PDO::ATTR_DEFAULT_FETCH_MODE (das standardmäßig auf PDO::FETCH_BOTH gesetzt ist).

    Damit ein Array zurückgegeben wird, das aus allen Werten einer einzelnen Spalte der Ergebnismenge besteht, muss PDO::FETCH_COLUMN angegeben werden. Die gewünschte Spalte kann mit dem Parameter column angegeben werden.

    Um nur die eindeutigen Werte einer einzelnen Spalte aus der Ergebnismenge zu abzurufen, müssen PDO::FETCH_COLUMN und PDO::FETCH_UNIQUE mittels bitweisem OR verknüpft werden.

    Damit ein Array zurückgegeben wird, das nach den Werten einer bestimmten Spalte gruppiert ist, müssen PDO::FETCH_COLUMN und PDO::FETCH_GROUP mittels bitweisem OR verknüpft werden.

    Bei den folgenden Parametern handelt es sich um dynamische Parameter, die vom Abrufmodus abhängig sind. Sie können nicht in Verbindung mit benannten Parametern verwendet werden.
    column

    Wird zusammen mit PDO::FETCH_COLUMN verwendet. Gibt die angegebene Spalte zurück (der Index beginnt bei 0).

    class

    Wird zusammen mit PDO::FETCH_CLASS verwendet. Gibt Instanzen der angegebenen Klasse zurück, wobei die Spalten jeder Zeile auf benannte Eigenschaften der Klasse abgebildet werden.

    constructorArgs

    Argumente des benutzerdefinierten Klassenkonstruktors, wenn der Parameter mode auf PDO::FETCH_CLASS gesetzt ist.

    callback

    Wird zusammen mit PDO::FETCH_FUNC verwendet. Gibt die Ergebnisse des angegebenen Funktionsaufrufs zurück, wobei die Spalten jeder Zeile als Parameter für den Aufruf verwendet werden.

    Rückgabewerte

    PDOStatement::fetchAll() gibt ein Array zurück, das die restlichen Zeilen der Ergebnismenge enthält. Das Array enthält jede Zeile entweder als Array von Spaltenwerten oder als Objekt mit Eigenschaften, die den einzelnen Spaltennamen entsprechen. Wenn es keine Ergebnisse gibt, die abgerufen werden können, wird ein leeres Array zurückgegeben.

    Wenn diese Methode verwendet wird, um große Ergebnismengen abzurufen, kann dies zu einer hohen Beanspruchung der System- und Netzwerkressourcen führen. Anstatt alle Daten abzurufen und in PHP zu bearbeiten, sollte in Betracht gezogen werden, den Datenbankserver für die Bearbeitung der Ergebnismengen zu verwenden. Zum Beispiel könnten WHERE- und ORDER BY-Klauseln in SQL verwendet werden, um die Ergebnismenge einzuschränken, bevor sie mit PHP abgerufen und verarbeitet wird.

    Fehler/Exceptions

    Gibt einen Fehler der Stufe E_WARNING aus, wenn das Attribut PDO::ATTR_ERRMODE auf PDO::ERRMODE_WARNING gesetzt ist.

    Löst eine PDOException aus, wenn das Attribut PDO::ATTR_ERRMODE auf PDO::ERRMODE_EXCEPTION gesetzt ist.

    Changelog

    Version Beschreibung
    8.0.0 Diese Methode gibt nun immer ein Array zurück, während zuvor bei einem Fehler möglicherweise false zurückgegeben wurde.

    Beispiele

    Beispiel #1 Abrufen der restlichen Zeilen einer Ergebnismenge

    <?php
    $sth     = $dbh->prepare("SELECT name, colour FROM fruit");
    $sth->execute();

    /* Abrufen der restlichen Zeilen der Ergebnismenge */
    print "Abrufen der restlichen Zeilen der Ergebnismenge:\n";
    $result = $sth->fetchAll();
    print_r($result);
    ?>

    Das oben gezeigte Beispiel erzeugt eine ähnliche Ausgabe wie:

    Abrufen der restlichen Zeilen der Ergebnismenge:
Array
(
    [0] => Array
        (
            [name] => apple
            [0] => apple
            [colour] => red
            [1] => red
        )

    [1] => Array
        (
            [name] => pear
            [0] => pear
            [colour] => green
            [1] => green
        )

    [2] => Array
        (
            [name] => watermelon
            [0] => watermelon
            [colour] => pink
            [1] => pink
        )

)

    Beispiel #2 Abrufen aller Werte einer einzelnen Spalte einer Ergebnismenge

    Das folgende Beispiel zeigt, wie alle Werte einer einzelnen Spalte aus einer Ergebnismenge abgerufen werden können, auch wenn die SQL-Anweisung selbst mehrere Spalten pro Zeile zurückgibt.

    <?php
    $sth     = $dbh->prepare("SELECT name, colour FROM fruit");
    $sth->execute();

    /* Abrufen aller Werte der ersten Spalte */
    $result = $sth->fetchAll(PDO::FETCH_COLUMN, 0);
    var_dump($result);
    ?>

    Das oben gezeigte Beispiel erzeugt eine ähnliche Ausgabe wie:

    Array(3)
(
    [0] =>
    string(5) => apple
    [1] =>
    string(4) => pear
    [2] =>
    string(10) => watermelon
)

    Beispiel #3 Gruppieren aller Werte nach einer einzelnen Spalte

    Das folgende Beispiel zeigt, wie ein assoziatives Array abgerufen werden kann, das nach den Werten der angegebenen Spalte in der Ergebnismenge gruppiert ist. Das Array enthält drei Schlüssel: Die Werte apple und pear werden als Arrays zurückgegeben, die zwei verschiedene Farben enthalten, während watermelon als Array zurückgegeben wird, das nur eine Farbe enthält.

    <?php
    $insert     = $dbh->prepare("INSERT INTO fruit(name, colour) VALUES (?, ?)");
    $insert->execute(array('apple', 'green'));
    $insert->execute(array('pear', 'yellow'));

    $sth = $dbh->prepare("SELECT name, colour FROM fruit");
    $sth->execute();

    /* Gruppieren der Werte nach der ersten Spalte */
    var_dump($sth->fetchAll(PDO::FETCH_COLUMN|PDO::FETCH_GROUP));
    ?>

    Das oben gezeigte Beispiel erzeugt eine ähnliche Ausgabe wie:

    array(3) {
  ["apple"]=>
  array(2) {
    [0]=>
    string(5) "green"
    [1]=>
    string(3) "red"
  }
  ["pear"]=>
  array(2) {
    [0]=>
    string(5) "green"
    [1]=>
    string(6) "yellow"
  }
  ["watermelon"]=>
  array(1) {
    [0]=>
    string(5) "pink"
  }
}

    Beispiel #4 Instanziieren einer Klasse für jedes Ergebnis

    Das folgende Beispiel zeigt das Verhalten im Modus PDO::FETCH_CLASS.

    <?php
    class fruit {
    public     $name;
    public     $colour;
    }

    $sth = $dbh->prepare("SELECT name, colour FROM fruit");
    $sth->execute();

    $result = $sth->fetchAll(PDO::FETCH_CLASS, "fruit");
    var_dump($result);
    ?>

    Das oben gezeigte Beispiel erzeugt eine ähnliche Ausgabe wie:

    array(3) {
  [0]=>
  object(fruit)#1 (2) {
    ["name"]=>
    string(5) "apple"
    ["colour"]=>
    string(5) "green"
  }
  [1]=>
  object(fruit)#2 (2) {
    ["name"]=>
    string(4) "pear"
    ["colour"]=>
    string(6) "yellow"
  }
  [2]=>
  object(fruit)#3 (2) {
    ["name"]=>
    string(10) "watermelon"
    ["colour"]=>
    string(4) "pink"
  }
  [3]=>
  object(fruit)#4 (2) {
    ["name"]=>
    string(5) "apple"
    ["colour"]=>
    string(3) "red"
  }
  [4]=>
  object(fruit)#5 (2) {
    ["name"]=>
    string(4) "pear"
    ["colour"]=>
    string(5) "green"
  }
}

    Beispiel #5 Aufrufen einer Funktion für jedes Ergebnis

    Das folgende Beispiel zeigt das Verhalten im Modus PDO::FETCH_FUNC.

    <?php
    function fruit($name, $colour) {
    return     "{$name}: {$colour}";
    }

    $sth = $dbh->prepare("SELECT name, colour FROM fruit");
    $sth->execute();

    $result = $sth->fetchAll(PDO::FETCH_FUNC, "fruit");
    var_dump($result);
    ?>

    Das oben gezeigte Beispiel erzeugt eine ähnliche Ausgabe wie:

    array(3) {
  [0]=>
  string(12) "apple: green"
  [1]=>
  string(12) "pear: yellow"
  [2]=>
  string(16) "watermelon: pink"
  [3]=>
  string(10) "apple: red"
  [4]=>
  string(11) "pear: green"
}

    Siehe auch

    add a note add a note

    User Contributed Notes 32 notes

    up
    87
    simplerezo at gmail dot com
    7 years ago
    I still don't understand why FETCH_KEY_PAIR is not documented here (http://php.net/manual/fr/pdo.constants.php), because it could be very useful!

    <?php
      var_dump    ($pdo->query('select id, name from table')->fetchAll(PDO::FETCH_KEY_PAIR));
    ?>

    This will display:
    array(2) {
      [2]=>
      string(10) "name2"
      [5]=>
      string(10) "name5"
    }
    up
    47
    dyukemedia at gmail dot com
    10 years ago
    Getting foreach to play nicely with some data from PDO FetchAll()
    I was not understanding to use the $value part of the foreach properly, I hope this helps someone else.
    Example:
    <?php
    $stmt     = $this->db->prepare('SELECT title, FMarticle_id FROM articles WHERE domain_name =:domain_name');
                    $stmt->bindValue(':domain_name', $domain);
                    $stmt->execute();
                    $article_list = $stmt->fetchAll(PDO::FETCH_ASSOC);
    ?>
    which gives:

    array (size=2)
      0 =>
        array (size=2)
          'title' => string 'About Cats Really Long title for the article' (length=44)
          'FMarticle_id' => string '7CAEBB15-6784-3A41-909A-1B6D12667499' (length=36)
      1 =>
        array (size=2)
          'title' => string 'another cat story' (length=17)
          'FMarticle_id' => string '0BB86A06-2A79-3145-8A02-ECF6EA5C405C' (length=36)

    Then use:
    <?php
    foreach ($article_list as $row => $link) {
      echo      '<a href="'.  $link['FMarticle_id'].'">' . $link['title']. '</a></br>';
      }
    ?>
    up
    32
    esw at pixeloution dot removeme dot com
    14 years ago
    Interestingly enough, when you use fetchAll, the constructor for your object is called AFTER the properties are assigned. For example:

    <?php
    class person {
        public     $name;

        function     __construct() {
               $this->name = $this->name . " is my name.";
        }
    }

    # set up select from a database here with PDO
    $obj = $STH->fetchALL(PDO::FETCH_CLASS, 'person');
    ?>

    Will result in ' is my name' being appended to all the name columns. However if you call it slightly differently:

    <?php
    $obj     = $obj = $STH->fetchAll(PDO::FETCH_CLASS | PDO::FETCH_PROPS_LATE, 'person');
    ?>

    Then the constructor will be called before properties are assigned. I can't find this documented anywhere, so I thought it would be nice to add a note here.
    up
    40
    Ant P.
    15 years ago
    You might find yourself wanting to use FETCH_GROUP and FETCH_ASSOC at the same time, to get your table's primary key as the array key:
    <?php
    // $stmt is some query like "SELECT rowid, username, comment"
    $results = $stmt->fetchAll(PDO::FETCH_GROUP|PDO::FETCH_ASSOC);

    // It does work, but not as you might expect:
    $results = array(
            1234 => array(0 => array('username' => 'abc', 'comment' => '[...]')),
            1235 => array(0 => array('username' => 'def', 'comment' => '[...]')),
    );

    // ...but you can at least strip the useless numbered array out easily:
    $results = array_map('reset', $results);
    ?>
    up
    21
    Daniel Hofmann
    15 years ago
    PLEASE BE AWARE: If you do an OUTER LEFT JOIN and set PDO FetchALL to PDO::FETCH_ASSOC, any primary key you used in the OUTER LEFT JOIN will be set to a blank if there are no records returned in the JOIN.

    For example:
    <?php
    //query the product table and join to the image table and return any images, if we have any, for each product
    $sql = "SELECT * FROM product, image
    LEFT OUTER JOIN image ON (product.product_id = image.product_id)"    ;

    $array = $stmt->fetchAll(PDO::FETCH_ASSOC);

    print_r($array);
    ?>

    The resulting array will look something like this:

    Array
    (
        [0] => Array
            (
                [product_id] =>
                [notes] => "this product..."
                [brand] => "Best Yet"
                ...

    The fix is to simply specify your field names in the SELECT clause instead of using the * as a wild card, or, you can also specify the field in addition to the *. The following example returns the product_id field correctly:

    <?php
    $sql     = "SELECT *, product.product_id FROM product, image
    LEFT OUTER JOIN image ON (product.product_id = image.product_id)"    ;

    $array = $stmt->fetchAll(PDO::FETCH_ASSOC);

    print_r($array);
    ?>

    The resulting array will look something like this:

    Array
    (
        [0] => Array
            (
                [product_id] => 3
                [notes] => "this product..."
                [brand] => "Best Yet"
                ...
    up
    19
    Anonymous
    13 years ago
    Note that fetchAll() can be extremely memory inefficient for large data sets. My memory limit was set to 160 MB this is what happened when I tried:

    <?php
    $arr     = $stmt->fetchAll();
    // Fatal error: Allowed memory size of 16777216 bytes exhausted
    ?>

    If you are going to loop through the output array of fetchAll(), instead use fetch() to minimize memory usage as follows:

    <?php
    while ($arr = $stmt->fetch()) {
        echo     round(memory_get_usage() / (1024*1024),3) .' MB<br />';
            // do_other_stuff();
    }
    // Last line for the same query shows only 28.973 MB usage
    ?>
    up
    18
    fractalesque at gmail dot com
    10 years ago
    to fetch rows grouped by primary id or any other field you may use FETCH_GROUP with FETCH_UNIQUE:

    <?php

    //prepare and execute a statement returning multiple rows, on a single one
    $stmt = $db->prepare('SELECT id,name,role FROM table');
    $stmt->execute();
    var_dump($stmt->fetchAll(PDO::FETCH_GROUP | PDO::FETCH_UNIQUE));

    //returns an array with the first selected field as key containing associative arrays with the row. This mode takes care not to repeat the key in corresponding grouped array.

    $result = array
    (    1 => array
       (    'name'=>'foo',
            'role'=>'sage',),
          2 => array
       (    'name'=>'bar',
            'role'=>'rage',),);

    // 'SELECT name,id,role FROM table' would result in that:

    $result = array
    (    'foo' => array
       (    'id'=>1,
            'role'=>'sage',),
          'bar' => array
       (    'id'=>2,
            'role'=>'rage',),);

    ?>
    up
    9
    michael dot arnauts at gmail dot com
    10 years ago
    If you want to use PDO::FETCH_CLASS but don't like that all the values are of the type string, you can always use the __construct function of the class specified to convert them to a different type.

    Another way is using mysqlnd, but it seems I had to recompile PHP for that.

    <?php

    class Cdr {
        public     $a; // int
            public $b; // float
            public $c; // string
       
            public function __construct() {
                $this->a = intval($this->a);
                $this->b = floatval($this->b);
        }
        
    }

    // ...
    $arrCdrs = $objSqlStatement->fetchAll(PDO::FETCH_CLASS, 'Cdr');

    ?>
    up
    22
    Anonymous
    16 years ago
    If no rows have been returned, fetchAll returns an empty array.
    up
    6
    Hayley Watson
    13 years ago
    If you use the PDO::FETCH_CLASS | PDO::FETCH_PROPS_LATE flags to map columns to object properties, fetchAll() will use any __set() method your object has when carrying out the mapping.
    up
    5
    stas at metalinfo dot ru
    18 years ago
    Note, that you can use PDO::FETCH_COLUMN|PDO::FETCH_GROUP pair only while selecting two columns, not like DB_common::getAssoc(), when grouping is set to true.
    up
    4
    info at yuriblanc dot it
    9 years ago
    Something missing in the doc.
    If for instance you try to fetchAll(PDO::CLASS, "Class") it sometimes return an array of objects with NULL values, but the count of objects fetched correspond to table rows.

    In this way works fine:
    fetchAll(PDO::FETCH_CLASS | PDO::FETCH_PROPS_LATE, "Class");

    For example

    $stm = $pdo->prepare("SELECT * FROM Fruit");
    $stm->execute();
    $stm->fetchAll(PDO::FETCH_CLASS | PDO::FETCH_PROPS_LATE, "Fruit");
    up
    3
    Anonymous
    7 years ago
    Be careful when using PDO::FETCH_COLUMN with PDO::FETCH_GROUP. By default, results are grouped by first column (index 0) and second column (index 1) is returned. But, if you provide fetch argument, it wouldn't affect returned column, but grouping column. If grouping column is set explicitly , first columns is returned instead of second.

    <?php
    $insert     = $dbh->prepare("INSERT INTO people(id, gender) VALUES (?, ?)");
    $insert->execute(array('2', 'female'));
    $insert->execute(array('3', 'female'));
    $insert->execute(array('4', 'female'));
    $insert->execute(array('5', 'male'));
    $insert->execute(array('6', 'male'));

    $sth = $dbh->prepare("SELECT gender, id FROM people");
    $sth->execute();

    /* Group values by the first column */
    var_dump($sth->fetchAll(PDO::FETCH_COLUMN|PDO::FETCH_GROUP));
    ?>
    Returns:
    <?php
    array (size=2)
          'female' =>
        array (    size=3)
              0 => string '2' (length=1)
              1 => string '3' (length=1)
              2 => string '4' (length=1)
          'male' =>
        array (    size=2)
              0 => string '5' (length=1)
              1 => string '6' (length=1)
    ?>

    But,
    <?php
    var_dump    ($sth->fetchAll(PDO::FETCH_COLUMN|PDO::FETCH_GROUP, 0));
    ?>
    returns:
    <?php
    array (size=2)
          'female' =>
        array (    size=3)
              0 => string 'female' (length=1)
              1 => string 'female' (length=1)
              2 => string 'female' (length=1)
          'male' =>
        array (    size=2)
              0 => string 'male' (length=1)
              1 => string 'male' (length=1)
    ?>
    and
    <?php
    var_dump    ($sth->fetchAll(PDO::FETCH_COLUMN|PDO::FETCH_GROUP, 1));
    ?>
    returns
    <?php
    array (size=5)
          2 =>
        array (    size=1)
              0 => string 'female' (length=1)
          3 =>
        array (    size=1)
              0 => string 'female' (length=1)
          4 =>
        array (    size=1)
              0 => string 'female' (length=1)
          5 =>
        array (    size=1)
              0 => string 'male' (length=1)
          6 =>
        array (    size=1)
              0 => string 'male' (length=1)
    ?>

    First column is retuned and grouping is done by provided column index.
    up
    3
    lu_kors
    6 years ago
    You might find yourself wanting to use FETCH_GROUP and FETCH_ASSOC at the same time, to get your table's primary key as the array key - use FETCH_UNIQUE also, or you will probably get some unintended behaivor:
    <?php
    // $stmt is some query like "SELECT rowid, username, comment"

    //with unique
    $results = $stmt->fetchAll(PDO::FETCH_GROUP|PDO::FETCH_ASSOC|PDO::FETCH_UNIQUE);
    $results = array(
            1234 => array('username' => 'abc', 'comment' => '[...]'),
            1235 => array('username' => 'def', 'comment' => '[...]'),
    );
    //without unique
    $results = $stmt->fetchAll(PDO::FETCH_GROUP|PDO::FETCH_ASSOC);
    // It does work, but not as you might expect:
    $results = array(
            1234 => array(0 => array('username' => 'abc', 'comment' => '[...]')),
            1235 => array(0 => array('username' => 'def', 'comment' => '[...]')),
    );
    ?>
    Credit to Ant P. for minimal Example (which i shamelessly copied from the note above me). Thanks a lot!
    up
    3
    mxrgus
    15 years ago
    In method body:

    return $pstmt->fetchAll() or die("bad");

    will not return correct value, but "1" instead.
    up
    8
    harlequin2 at gmx dot de
    16 years ago
    There is also another fetch mode supported on Oracle and MSSQL:
    PDO::FETCH_ASSOC

    > fetches only column names and omits the numeric index.

    If you would like to return all columns from an sql statement with column keys as table headers, it's as simple as this:

    <?php
    $dbh     = new PDO("DS", "USERNAME", "PASSWORD");
    $stmt = $dbh->prepare("SELECT * FROM tablename");
    $stmt->execute();
    $arrValues = $stmt->fetchAll(PDO::FETCH_ASSOC);
    // open the table
    print "<table wdith=\"100%\">\n";
    print     "<tr>\n";
    // add the table headers
    foreach ($arrValues[0] as $key => $useless){
        print     "<th>$key</th>";
    }
    print     "</tr>";
    // display data
    foreach ($arrValues as $row){
        print     "<tr>";
        foreach (    $row as $key => $val){
            print     "<td>$val</td>";
        }
        print     "</tr>\n";
    }
    // close the table
    print "</table>\n";
    ?>
    up
    2
    mrshelly at hotmail dot com
    16 years ago
    PHP fetchAll Data From SQL Server 2005
    if field's data type is varchar(nvarchar), only fetch 255 chars. but the "text" data type is ok.

    so, notice! to change the 'varchar' or 'nvarchar' (length > 255) to 'text' data type..

    hope to help u.

    <?php

    $user     = 'sa';
    $pass = 'pass';

    $conn = new PDO('mssql:host=127.0.0.1; dbname=tempdb;', $user, $pass);

    $mainSQL = "SELECT field_varchar, field_text FROM table1";
    $sth = $conn->prepare($mainSQL);
    $sth->setFetchMode(PDO::FETCH_ASSOC);
    $sth->execute();
    $retRows = $sth->fetchAll();
    // the field_varchar field only to fetch 255 chars(max)
    // the field_text is ok.

    var_dump($retRows);

    unset(    $sth); unset($conn);

    ?>
    up
    2
    Dennis
    14 years ago
    Error:
    SQLSTATE[HY000]: General error: 2014 Cannot execute queries while other unbuffered queries are active. Consider using PDOStatement::fetchAll(). Alternatively, if your code is only ever going to run against mysql, you may enable query buffering by setting the PDO::MYSQL_ATTR_USE_BUFFERED_QUERY attribute.

    If you're using something like:

    while ($row = $query->fetchObject()) {
        [...]
    }

    try using this instead:

    $rows = $query->fetchAll(PDO::FETCH_CLASS, 'ArrayObject');

    foreach ($rows as $row) {
        [...]
    }
    up
    2
    akira at etnforum dot com
    9 years ago
    There may be some user who needs to upgrade their MySQL class to PDO class. The way of fetching results were changed from while loop into a foreach loop. For the people who wish to fetch the results in a while loop, here is a simple trick.

    <?php

    $db     = new DB();
    $query = $db->prepare("SELECT * FROM CPUCategory");
    $query = $db->execute();
    $result = $db->fetchAll();
    var_dump($result);

    ?>

    The Output will be:
    array(2) {
        [0]=> array(2) {
            ["ccatid"]=> int(1)
            ["ccatname"]=> string(5) "Intel"
        }
        [1]=> array(2) {
            ["ccatid"]=> int(2)
            ["ccatname"]=> string(3) "AMD"
        }
    }

    Never look like the output of old function.
    [ORIGINAL STYLE] mysql_fetch_array($query)
    [   MYSQL CLASS] $db->fetch_array($query)

    And you may give up.
    But there is a simple way to use while loop to fetch the results.

    <?php

    $db     = new DB();
    $query = $db->prepare("SELECT * FROM CPUCategory");
    $query = $db->execute();
    $result = $db->fetchAll();
    $row = array_shift($result);
    // If you need to fetch them now, put it in a while loop just like below:
    // while($row = array_shift($result)) { ... }
       
    var_dump($row);

    ?>

    The Output will be in a single array with while loop returns TRUE:
    array(2) {
        ["ccatid"]=> int(1)
        ["ccatname"]=> string(5) "Intel"
    }

    So after fetching this row, while loop runs again and fetch the next row until all row has fetched, then the while loop will return false. (Just like the old function did)

    When you need to upgrade to PDO class, not much code needs to be modified and remember.
    up
    1
    shaunc
    2 years ago
    Note that \PDO::FETCH_DEFAULT was not introduced until PHP 8.0.7 and 8.1.0. It will throw an undefined constant error in earlier versions.
    up
    1
    php at erikthiart dot com
    3 years ago
    I am adding this here as I don’t seem to find any clear and easy to find examples and explanations of PDO::FETCH_GROUP and how it works by means of an example.

    I find this to be one of the most useful modes available in fetchAll() when you need to work with any form of grouping.

    In essence, PDO can group results into nested arrays, based on the first field selected.

    Example

    <?php

    $data     = $pdo->query('SELECT sex, name, car FROM users')->fetchAll(PDO::FETCH_GROUP);

    /* array (
      'male' => array ( 0 =>
        array (
          'name' => 'John',
          'car' => 'Toyota',
        ),
        1 => array (
          'name' => 'Mike',
          'car' => 'Ford',
        ),
      ),
      'female' => array (
        0 => array (
          'name' => 'Mary',
          'car' => 'Mazda',
        ),
        1 => array (
          'name' => 'Kathy',
          'car' => 'Mazda',
        ),
      ),
    ) */

    ?>

    Tip: If you need to group the data by something other than the first field then you can do it like this as well

    <?php
    SELECT sex    , users.* FROM users
    ?>
    up
    0
    herhor67 at interia dot pl
    4 years ago
    I noticed quite a weird (at least for me) behaviour. Maybe it can help someone who will struggle with this too.

    <?php
    $stmt     = new PDOStatement();
    $foo  = $stmt->fetchAll();
    var_dump($foo);

    $stmt = $pdo->prepare('SELECT VERSION()');
    $foo  = $stmt->fetchAll();
    var_dump($foo);

    $stmt = $pdo->prepare("INSERT INTO `tblnm` (date) VALUES (NOW())");
    $stmt->execute();
    $foo  = $stmt->fetchAll();
    var_dump($foo);

    $stmt = $pdo->query("INSERT INTO `tblnm` (date) VALUES (NOW())");
    $foo  = $stmt->fetchAll();
    var_dump($foo);
    ?>

    The first is just an empty object, so $foo === bool(false)
    The second one is not executed, so $foo === array(0) {}
    The third and fourth throw exception at fetchAll():
    "General error: 2014 Cannot execute queries while other unbuffered queries are active. Consider using PDOStatement::fetchAll(). Alternatively, [...] you may enable query buffering by setting the PDO::MYSQL_ATTR_USE_BUFFERED_QUERY attribute."

    fetchAll() is already used, and changing the above attribute between true and false changes nothing.
    This is probably caused by the INSERT not having any return value. We could use RETURNING in the sql, but it's quite new, so may not yet be supported everywhere.

    What finally worked for me, was $pdo->exec() and lastInsertId(), because ID is the only column I needed anyway.
    <?php
    $count     = $pdo->exec('INSERT INTO `tblnm` (date) VALUES (NOW())');
    $foo = $pdo->lastInsertId();
    var_dump($foo);
    ?>
    Then e.g. $foo === string(2) "93"
    up
    0
    geompse at gmail dot com
    4 years ago
    There is a breaking change upgrading from PHP<7.4 to PHP 8.0. If your class extend PDOStatement, the PHP 8.0 typed prototype is incompatible :
    - PHP 7.4 = public PDOStatement::fetchAll ([ int $fetch_style [, mixed $fetch_argument [, array $ctor_args = array() ]]] ) : array
    - PHP 8.0 = public PDOStatement::fetchAll ([ int $mode = PDO::FETCH_BOTH[, mixed ...$args] ]) : array

    While they are compatible for a human being, PHP is not enjoying it :
    - PHP 7.4 = PHP Warning: Declaration of (your class prototype) should be compatible with (PDOStatement's prototype)
    - PHP 8.0 = [PhpCompileError] Declaration of (your class prototype) must be comptable with (PDOStatement's prototype)

    Because the first one is a warning, it is not fatal, and you might be happy using PHP 8.0's prototype. My personal solution was to stop extending PDOStatement and thus rewrite associated typing declarations and conditions.
    up
    0
    Leonardo Costa linux at linuxmanbr dot com dot br
    5 years ago
    Method with Return object (PHP 7.2)

    class MySql {

    public function __construct()
            {
                parent::__construct();
               
                try{

       
                   
                    $options = array
                    (
                        PDO::MYSQL_ATTR_INIT_COMMAND => "SET NAMES UTF8"
                    );
                   
                    $this->pdo = new PDO('mysql:host=127.0.0.1;dbname=testuser','dbtest', 'xxxxxxx',$options);
                    $this->pdo->setAttribute(PDO::ATTR_ERRMODE, PDO::ERRMODE_EXCEPTION);
                   
                }catch(PDOException $e) {
                    print "Error!: " . $e->getMessage() . "<br/>";
                    die();
                }
            }
           
            public function selectAll(string $sql)
            {
                $conn = $this->pdo->query($sql);
                return $conn->fetchAll(PDO::FETCH_OBJ);
            }
    }
    up
    0
    rudigerw at hotmail dot com
    6 years ago
    I was blown away that you can actually combine PDO::FETCH_CLASS | PDO::FETCH_CLASSTYPE | PDO::FETCH_UNIQUE, because both PDO::FETCH_CLASSTYPE and PDO::FETCH_UNIQUE say they will use the first column, but it turns out PDO::FETCH_CLASSTYPE goes first and then PDO::FETCH_UNIQUE will use the next column. This way you can create an associative array of objects, with one of the table columns as key. For example a query such as

    'SELECT Class, Id, t.* FROM subscriptions_tbl t'

    might give you this result:

    Array
    (
        [20481086] => WConsumerSubscription Object
            (
                [Variant] => 2
                [_Expiration:WSubscriptionModel:private] => DateTime Object
                    (
                        [date] => 2018-08-08 00:00:00.000000
                        [timezone_type] => 3
                        [timezone] => UTC
                    )

                [Notes] =>
                [Id] => 20481086
                [_Deleted:protected] => 0
                [_VersionNo:protected] => 2
                [ContactId] =>
                [ConsumerId] => 2
            )

        [21878324] => WAdminSubscription Object
            (
                [Variant] =>
                [_Expiration:WSubscriptionModel:private] =>
                [Notes] =>
                [Id] => 21878324
                [_Deleted:protected] => 0
                [_VersionNo:protected] => 1
                [ContactId] =>
            )
    )
    up
    -1
    sidi dot khalifa at live dot fr
    5 years ago
    Inject the parameters directly into `fetchAll` instead of using `bindValue`

    $query  = "
                SELECT
                        a.total_paid_tax_incl AS prize,
                        a.date_add AS date_add
                FROM orders a
                WHERE a.order_id = :seventeen
                       AND a.name = :name";

    // connection (Example in Symfony you use class Connection in namespace Doctrine\DBAL\Connection)
    $this->connection->fetchAll($query, ['seventeen' => 70, 'name' => 'Sidi'])
    up
    0
    jeroen dot deklerk at hotmail dot com
    8 years ago
    I was having trouble with returning PDO query results in arrays, due to the structure of the results of those queries (query array with arrays for results inside). Now when executing a fetchAll() on a query you get the following:

    Array ( [0] = Array ( [key1] => "value1", [key2] => "value2") [1] = Array( [key1] => "value1", [key2] => "value2") )

    This is a smaller array, but return results in a HUGE database this way and it quickly becomes IMPPOSIBRU to read out the array given.

    This is where the glorious foreach comes in! We all know the basic writing of a foreach (foreach ($array as $key => $value) {...}), but with query results there's a twist, as both the $key AND $value variables are arrays, where $key is the array of the query containing the result arrays and $value is/are the result array(s) themselves.

    So in this foreach we have to talk directly to $value to get our results! This would look something like this:

    <?php

          foreach ($query as $key => $value) {
          return     $value["key2"];
      }

    ?>

    This already does the job, but to return them in arrays we have to change our return code a little bit, like so:

    <?php

           foreach ($query as $key => $value) {
          return array (
                     "key1" => $value["key1"],
                     "key2" => $value["key2"]
          );
       }

    ?>

    This foreach loops through the query array, just like the firs one, but the return code just doesn't return the keys representing the result arrays ($key) and returns only keys from inside the result arrays,  stored in $value. This gives us an array looking like this:

    Array ( [key1] => "value1", [key2] => "value2")

    This should return all the values in your array, if written properly. I'm still having problems with the foreach not returning ALL results, but this note was mainly to show how it can be returned in an array.
    up
    -2
    janniet at kiekies dot net
    10 years ago
    If you want to fetch rows as an object for which you have not defined a class, you can do:
    <?php
    $result     = $q->fetchAll(PDO::FETCH_OBJ);
    ?>
    up
    -1
    davey at php dot net
    16 years ago
    When passing PDO::FETCH_CLASS as the first argument, this method will accept the class name as the second option:

    <?php
    $query     = $pdo->prepare($sql);

    $result = $query->execute($values);

    if (    $result && $query->rowCount() > 0) {
            $records = $query->fetchAll(PDO::FETCH_CLASS, 'Some_Class');
            // $record is now an array of Some_Class objects
    }
    ?>

    - Davey
    up
    -3
    ramon at monztro dot com
    12 years ago
    If you are trying to call PDOStatement::fetchAll and is not getting the result set as expected (empty instead), check if you called PDOStatement::execute first.

    Remember PDOStatement::fetchAll does not execute the query, it just mounts the array.

    :)
    up
    -6
    GyoreG
    10 years ago
    If you would like to get the result as "key-value-pairs", like:

    Array(
        [key1] => "value1"
        [key2] => "value2"
    )

    then you can do it by calling fetchAll with PDO::FETCH_GROUP | PDO::FETCH_COLUMN parameters.

    <?php
      $result     = $query->fetchAll(PDO::FETCH_GROUP|PDO::FETCH_COLUMN);
    ?>
    up
    -13
    Dean S.
    9 years ago
    Using fetchAll() with the fetch types PDO::FETCH_GROUP and PDO::FETCH_ASSOC, PDO::FETCH_CLASS will always use the first column in the selected table as the key for the row in the output...
    add a note add a note
    To Top