Filtros de saneamiento

Lista de filtros de saneamiento
ID Nombre Banderas Descripción
FILTER_SANITIZE_EMAIL "email"   Elimina todos los caracteres menos letras, dígitos y !#$%&'*+-=?^_`{|}~@.[].
FILTER_SANITIZE_ENCODED "encoded" FILTER_FLAG_STRIP_LOW, FILTER_FLAG_STRIP_HIGH, FILTER_FLAG_ENCODE_LOW, FILTER_FLAG_ENCODE_HIGH String URL-encode, opcionalmente elimina o codifica caracteres especiales.
FILTER_SANITIZE_MAGIC_QUOTES "magic_quotes"   Aplica addslashes().
FILTER_SANITIZE_NUMBER_FLOAT "number_float" FILTER_FLAG_ALLOW_FRACTION, FILTER_FLAG_ALLOW_THOUSAND, FILTER_FLAG_ALLOW_SCIENTIFIC Elimina todos los caracteres a excepción de los dígitos, +- y, opcionalmente, .,eE.
FILTER_SANITIZE_NUMBER_INT "number_int"   Elimina todos los caracteres excepto dígitos y los signos de suma y resta.
FILTER_SANITIZE_SPECIAL_CHARS "special_chars" FILTER_FLAG_STRIP_LOW, FILTER_FLAG_STRIP_HIGH, FILTER_FLAG_ENCODE_HIGH Escapa caracteres HTML '"<>& y caracteres con valores ASCII menores que 32, opcionalmente elimina o codifica caracteres especiales.
FILTER_SANITIZE_FULL_SPECIAL_CHARS "full_special_chars" FILTER_FLAG_NO_ENCODE_QUOTES, Equivalente a llamar a htmlspecialchars() con ENT_QUOTES establecido. Las comillas de codificación pueden ser desactivadas mediante el establecimiento de FILTER_FLAG_NO_ENCODE_QUOTES. Al igual que htmlspecialchars(), este filtro tiene en cuenta el default_charset y si en una secuencia de bytes se detecta que contiene un carácter no válido en el conjunto de caracteres actual entonces el string completo es rechazado lo que resulta en un string de longitud 0. Cuando se utiliza este filtro como un filtro predeterminado, vea la advertiencia de abajo sobre establecer las banderas predeterminadas a 0.
FILTER_SANITIZE_STRING "string" FILTER_FLAG_NO_ENCODE_QUOTES, FILTER_FLAG_STRIP_LOW, FILTER_FLAG_STRIP_HIGH, FILTER_FLAG_ENCODE_LOW, FILTER_FLAG_ENCODE_HIGH, FILTER_FLAG_ENCODE_AMP Elimina etiquetas, opcionalmente elimina o codifica caracteres especiales.
FILTER_SANITIZE_STRIPPED "stripped"   Alias del filtro "string".
FILTER_SANITIZE_URL "url"   Elimina todos los caracteres excepto letras, dígitos y $-_.+!*'(),{}|\\^~[]`<>#%";/?:@&=.
FILTER_UNSAFE_RAW "unsafe_raw" FILTER_FLAG_STRIP_LOW, FILTER_FLAG_STRIP_HIGH, FILTER_FLAG_ENCODE_LOW, FILTER_FLAG_ENCODE_HIGH, FILTER_FLAG_ENCODE_AMP No hace nada, opcionalmente eliminar o codificar caracteres. Este filtro es un alias de FILTER_DEFAULT.

Advertencia

Cuando se utiliza uno de estos tres filtros como un filtro predetermindo a través de fichero ini o de la configuración del servidor web, las banderas predeterminadas son establecidas a FILTER_FLAG_NO_ENCODE_QUOTES. Se necesita establecer explícitamente filter.default_flags a 0 para tener la codificación de comillas por omisión. Como esto:

Ejemplo #1 Configurar el filtro predeterminado para que actúe como htmlspecialchars

filter.default = full_special_chars
filter.default_flags = 0

Historial de cambios

Versión Descripción
5.2.11/5.3.1 Las barras (/) son eliminadas por FILTER_SANITIZE_EMAIL. Antes se mantenían.

add a note add a note

User Contributed Notes 16 notes

up
64
googlybash24 at aol dot com
12 years ago
Remember to trim() the $_POST before your filters are applied:

<?php

// We trim the $_POST data before any spaces get encoded to "%20"

// Trim array values using this function "trim_value"
function trim_value(&$value)
{
   
$value = trim($value);    // this removes whitespace and related characters from the beginning and end of the string
}
array_filter($_POST, 'trim_value');    // the data in $_POST is trimmed

$postfilter =    // set up the filters to be used with the trimmed post array
   
array(
           
'user_tasks'                        =>    array('filter' => FILTER_SANITIZE_STRING, 'flags' => !FILTER_FLAG_STRIP_LOW),    // removes tags. formatting code is encoded -- add nl2br() when displaying
           
'username'                            =>    array('filter' => FILTER_SANITIZE_ENCODED, 'flags' => FILTER_FLAG_STRIP_LOW),    // we are using this in the url
           
'mod_title'                            =>    array('filter' => FILTER_SANITIZE_ENCODED, 'flags' => FILTER_FLAG_STRIP_LOW),    // we are using this in the url
       
);

$revised_post_array = filter_var_array($_POST, $postfilter);    // must be referenced via a variable which is now an array that takes the place of $_POST[]
echo (nl2br($revised_post_array['user_tasks']));    //-- use nl2br() upon output like so, for the ['user_tasks'] array value so that the newlines are formatted, since this is our HTML <textarea> field and we want to maintain newlines
?>
up
16
ipse at sergiosantos dot me
3 years ago
Although it's specifically mentioned in the above documentation, because many seem to find this unintuitive it's worth pointing out that FILTER_SANITIZE_NUMBER_FLOAT will remove the decimal character unless you specify FILTER_FLAG_ALLOW_FRACTION:

<?php
$number_string
= '12.34';

echo
filter_var( $number_string, FILTER_SANITIZE_NUMBER_FLOAT ); // 1234

echo filter_var( $number_string, FILTER_SANITIZE_NUMBER_FLOAT, FILTER_FLAG_ALLOW_FRACTION ); // 12.34
?>
up
61
Anonymous
9 years ago
FILTER_SANITIZE_STRING doesn't behavior the same as strip_tags function.    strip_tags allows less than symbol inferred from context, FILTER_SANITIZE_STRING strips regardless.
<?php
$smaller
= "not a tag < 5";
echo
strip_tags($smaller);    // -> not a tag < 5
echo filter_var ( $smaller, FILTER_SANITIZE_STRING); // -> not a tag
?>
up
31
Willscrlt
8 years ago
To include multiple flags, simply separate the flags with vertical pipe symbols.

For example, if you want to use filter_var() to sanitize $string with FILTER_SANITIZE_STRING and pass in FILTER_FLAG_STRIP_HIGH and FILTER_FLAG_STRIP_LOW, just call it like this:

$string = filter_var($string, FILTER_SANITIZE_STRING, FILTER_FLAG_STRIP_HIGH | FILTER_FLAG_STRIP_LOW);

The same goes for passing a flags field in an options array in the case of using callbacks.

$var = filter_var($string, FILTER_SANITIZE_SPECIAL_CHARS,
array('flags' => FILTER_FLAG_STRIP_LOW | FILTER_FLAG_ENCODE_HIGH));

Thanks to the Brain Goo blog at popmartian.com/tipsntricks/for this info.
up
15
AntonioPrimera
8 years ago
Please be aware that when using filter_var() with FILTER_SANITIZE_NUMBER_FLOAT and FILTER_SANITIZE_NUMBER_INT the result will be a string, even if the input value is actually a float or an int.

Use FILTER_VALIDATE_FLOAT and FILTER_VALIDATE_INT, which will convert the result to the expected type.
up
22
marcus at synchromedia dot co dot uk
14 years ago
It's not entirely clear what the LOW and HIGH ranges are. LOW is characters below 32, HIGH is those above 127, i.e. outside the ASCII range.

<?php
$a
= "\tcafé\n";
//This will remove the tab and the line break
echo filter_var($a, FILTER_SANITIZE_STRING, FILTER_FLAG_STRIP_LOW);
//This will remove the é.
echo filter_var($a, FILTER_SANITIZE_STRING, FILTER_FLAG_STRIP_HIGH);
?>
up
10
galvao at galvao dot eti dot br
11 years ago
Just to clarify, since this may be unknown for a lot of people:

ASCII characters above 127 are known as "Extended" and they represent characters such as greek letters and accented letters in latin alphabets, used in languages such as pt_BR.

A good ASCII quick reference (aside from the already mentioned Wikipedia article) can be found at: http://www.asciicodes.com/
up
5
david dot drakulovski at gmail dot com
10 years ago
Here is a simpler and a better presented ASCII list for the <32 or 127> filters
(if wikipedia confused the hell out of you):

http://www.danshort.com/ASCIImap/
up
1
finkenb2 at msu dot edu
10 months ago
With the deprecation of FILTER_SANITIZE_STRING, the "use htmlspecialchars instead" is an incomplete comment.  The functionality of FILTER_SANITIZE_STRING was a combination of htmlspcialchars and (approximately) strip_tags.  For true compatibility a polyfil may be needed:

<?php
function filter_string_polyfill(string $string): string
{
   
$str = preg_replace('/\x00|<[^>]*>?/', '', $string);
    return
str_replace(["'", '"'], ['&#39;', '&#34;'], $str);
}

$string = "Some \"' <bizzare> string & to Sanitize < !$@%";
echo
filter_var($string,FILTER_SANITIZE_STRING).PHP_EOL;
//Some &#34;&#39;  string & to Sanitize

echo htmlspecialchars($string).PHP_EOL;
//Some &quot;&#039; &lt;bizzare&gt; string &amp; to Sanitize &lt; !$@%

echo strip_tags($string).PHP_EOL;
//Some "'  string & to Sanitize < !$@%

echo htmlspecialchars(strip_tags($string,ENT_QUOTES)).PHP_EOL;
//Some &quot;&#039;  string &amp; to Sanitize &lt; !$@%

echo filter_string_polyfill($string).PHP_EOL;
//Some &#34;&#39;  string & to Sanitize
up
-2
darren at daz-web dot com
5 years ago
For those looking for a simple way around filtering POST forms that have textarea elements in them. If you also need tab for example you can extend quite easily.

<?php
//create an array of all relevant textareas
$textareas = array("ta1");

foreach(
$_POST as $k => $v)
    {
       
$v = trim($v);//so we are sure it is whitespace free at both ends
   
        //preserve newline for textarea answers
       
if(in_array($k,$textareas))$v=str_replace("\n","[NEWLINE]",$v);
   
       
//sanitise string
       
$v = filter_var($v, FILTER_SANITIZE_STRING, FILTER_FLAG_STRIP_LOW | FILTER_FLAG_STRIP_HIGH | FILTER_FLAG_STRIP_BACKTICK);
   
       
//now replace the placeholder with the original newline
       
$_POST[$k] = str_replace("[NEWLINE]","\n",$v);
    }

//simple form for testing submital

?><!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>Filter test</title>
</head>

<body>
   
<form action="" method="post">
    <p>
        <textarea name="ta1" cols="30" rows="10"><?php echo $_POST['ta1']; ?></textarea>
    </p>
    <p>
        <input type="text" name="txt1" size="30" value="<?php echo $_POST['txt1']; ?>" />
    </p>
    <p>
        <input type="submit" />   
    </p>
    </form>

</body>
   
</html>
up
-7
adellemfrank at hotmail dot com
12 years ago
A good list of which ASCII characters are < 32 and > 127 can be found at: http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters
up
-5
Rodrigo Guariento
4 years ago
To get ONLY numbers from a string use this code:
    echo preg_replace('/[^0-9]/', '', '123456-789');
up
-8
anonymous
4 years ago
In the "FILTER_SANITIZE_URL" section where it says, "Remove all characters except letters, digits and $-_.+!*'(),{}|\\^~[]`<>#%";/?:@&=." is there a reason why there is a double backslash (\\)? Shouldn't there only be one backslash if it's saying that backslashes are allowed?
up
-7
Anonymous
4 years ago
<?php
/*
     filter all ascii and save juste 0-9 a-Z and @ . _
*/

echo alphanum('abcdefghABCDEFGH0123456789/!:;@._');
// return abcdefghABCDEFGH0123456789@._

function alphanum( $string , $x=''){
       
$h=strlen($string);
        for(
$a=0; $a<$h; $a++) {
           
$i = ord($string[$a]);
            if(
                (
$i==46) || // .
               
($i==64) || // @
               
($i==95) || // _
               
($i > 47 && $i < 58) || //0123456789
               
($i > 64 && $i < 91) || //ABCDEFGH..Z
               
($i > 96 && $i < 123)   //abcdefgh..z
            
) { $x .= $string[$a]; }   
        }
        return
$x;
    }

?>
up
-24
Anonymous
11 years ago
Support for FILTER_SANITIZE_FULL_SPECIAL_CHARS was added from version 5.3.3
up
-39
Dmitry Snytkine
13 years ago
Beware that FILTER_FLAG_STRIP_LOW strips NEWLINE and TAG and CARRIAGE RETURN chars. If you have a form that accepts user input in plaintext format, all the submitted text will lose all the line breaks, making it appear all on one line. This basically renders this filter useless for parsing user-submitted text, even in plain text.
To Top