I finally managed to get xml_set_object() to work, after much documentation searching. As the solution I found has been hinted at, the focus has been wrong.
There have been many problems getting class contained XML parsers to make changes to the members of an instance. This is because, from what I'm guessing, the functions are using a either a new annonymous instance of the class or an uninstanced version of the class.
What we want to make sure it does it that the parser is accessing its handlers as member methods of a particular instance of a class. This can be done using the array method for passing a callback, setting the object as a reference to this instance. This way, you know that the parser is going to call the function properly.
Ex:
<?php
class Parser {
private $parser;
private $data;
public function __construct() {
$this->parser = NULL;
$this->data = '';
}
private function ParseElementStart($parser, $name, $attrs) {
// Code
}
private function ParseElementEnd($parser, $name) {
// Code
}
public function Parse($XMLdata) {
$this->parser = xml_parser_create();
xml_set_object($this->parser, $this);
xml_set_element_handler($this->parser,
array(&$this, 'ParseElementStart'),
array(&$this, 'ParseElementEnd'));
xml_parse($this->parser, $XMLdata);
xml_parser_free($this->parser);
}
}
?>
With this, when you call the Parse method, the data in that instance can be modified. I'm not sure if xml_set_object becomes unneccissary when using the array callbacks, but I leave it in just to make sure that the xml_parse function knows it's in the object.
As above, I'd recommend for memory sake, that the XML parser be created, used, and freed all in the same function, to ensure that everything is cleaned up correctly.
xml_set_object
(PHP 4, PHP 5, PHP 7, PHP 8)
xml_set_object — Usa un intérprete XML Parser dentro de un objeto
Descripción
Esta función permite usar parser dentro de object. Todas las funciones de retorno se podrian establecer con xml_set_element_handler(), etc y asumirlas como métodos de object.
Parámetros
-
parser -
Identificador del recurso del intérprete XML para usar dentro del objeto.
-
object -
El objeto donde usar el intérprete XML.
Valores devueltos
Devuelve true en caso de éxito o false en caso de error.
Historial de cambios
| Versión | Descripción |
|---|---|
| 8.0.0 |
parser expects an XMLParser
instance now; previously, a valid xml resource was expected.
|
Ejemplos
Ejemplo #1 Ejemplo xml_set_object()
<?php
class XMLParser
{
private $parser;
function __construct()
{
$this->parser = xml_parser_create();
xml_set_object($this->parser, $this);
xml_set_element_handler($this->parser, "tag_open", "tag_close");
xml_set_character_data_handler($this->parser, "cdata");
}
function __destruct()
{
xml_parser_free($this->parser);
unset($this->parser);
}
function parse($data)
{
xml_parse($this->parser, $data);
}
function tag_open($parser, $tag, $attributes)
{
var_dump($tag, $attributes);
}
function cdata($parser, $cdata)
{
var_dump($cdata);
}
function tag_close($parser, $tag)
{
var_dump($tag);
}
}
$xml_parser = new XMLParser();
$xml_parser->parse("<A ID='hallo'>PHP</A>");
?>El resultado del ejemplo sería:
string(1) "A"
array(1) {
["ID"]=>
string(5) "hallo"
}
string(3) "PHP"
string(1) "A"
add a note
User Contributed Notes 17 notes
wake dot shinigami at gmail dot com ¶
18 years ago
bettmenn at gmx dot de ¶
20 years ago
Adding to 'lmfe at mega dot ist dot utl dot pt' contribution below, I have to say that this behaviour is very usual for PHP if MemberVars of an Object arent initialized from the constructor.
What worked best for me so far was something like this:
<?php
class foo {
var $bar
// the constructor
function foo() {
unset($this->bar); // with every instanciation, the variable is cleared for the object
}
}
?>
lmfe at mega dot ist dot utl dot pt ¶
20 years ago
Using PHP 4.3.0, I got this strange behaviour:
<?php
class xml {
/* (as specified in the documentation above) */
} // end of class xml
/* This code works */
$xml_parser = new xml();
$xml_parser->parse("<A ID='hallo'>PHP</A>");
/* This code works */
$xml_parser2 = new xml();
$xml_parser2->parse("<A ID='hallo2'>PHP2</A>");
/* This code DON'T work */
$xml_parser = new xml();
$xml_parser->parse("<A ID='hallo3'>PHP3</A>");
?>
In the third block of code, php complains it can't find the handlers it needs.
It seems this problem only happens if the variable is used more than once.
Calling xml_parser_free doesn't help
zitan at mediasculpt dot net ¶
21 years ago
Just a note about creating abstract "call back handlers" as mentioned in some of the other notes. In this case I recommend extending the base XML class and overwritting the handler methods. The reason I wanted to do this, is that if you have a separate callback method class it causes problems, for example if you want to collect information out of the XML file and store it in an array. You can get around it with global variables, but I prefer to use them only when required ;)
Example:
<?php
class xml_output extends xml{
var $output = array();
function xml_output(){
$this->xml();
}
//overwrite base methods
function tag_open($parser, $tag, $attributes)
{
array_push($this->output, "<$tag, attributes>");
}
function cdata($parser, $cdata)
{
array_push($this->output, "$cdata");
}
function tag_close($parser, $tag)
{
array_push($this->output, "</$tag>");
}
}
$xml_parser = & new xml_output();
$xml_parser->parse("<A ID='hallo'>PHP</A>");
echo("$xml_parser->output");
?>
i_sofer at yahoo dot com ¶
24 years ago
Using xml parser in objects seem to have a problem that values modified(even of the object itself) get lost as soon as parsing ends...
joey at gimo dot co dot uk ¶
8 years ago
This function seems to be of very limited use when [$object_instance, "method_name"] is a callable.
hwheinzen at t-online dot de ¶
20 years ago
(Adding to zitan's note)
It seems easy enough to provide output functions for callback handler classes too.
Example:
<?php
class CallBack {
var $name = 'Callback';
var $info = 'Information!';
function toString() {
return $this->name.': '.$this->info;
}
}
class Main {
var $name = 'Main';
var $callBackObject;
function setCallBack(&$cBIn) { $this->callBackObject = $cBIn; }
function toString() {
return $this->name.': '.$this->callBackObject->toString();
}
}
$cb = & new CallBack;
$m = & new Main;
$m->setCallBack(&$cb);
echo $cb->toString();
echo $m->toString();
?>
So, after collecting information during the parse operation within the callback handler class, e.g. in tag_close(), retrieving them is possible.
sbeam at syxyz dot net ¶
22 years ago
passing the object as a call-time ref (&$this) as in the example will create a warning in php 4.1+. Pass xml_set_object($xp,$this); instead. This does not seem to break anything - but I dont know for sure.
chiefgeek at ecodedesign.com ¶
22 years ago
Just adding a little note about my above written example. It needs some improvements.
Because PHP passes by VALUE by default, when you pass an array like this:
array($callback_handler, 'handler_method')
PHP makes a copy of the callback_handler object and uses the handler_method in the copy.
This is not an ideal situation for many reasons...which I will not get into here...but you should have an idea by now.
The best way to fix this is to change a few things. In the function declaration change the parameter from $callback_handler to &$callback_handler. So now your declaration should look like this
function set_callback_handler(&$callback_handler)
{
...
}
Now each time you reference $callback_handler change it to &$callback_handler. For example:
xml_set_element_handler(
$this->xml_parser,
array(&$callback_handler, 'start_element'),
array(&$callback_handler, 'close_Element' ));
This ensures that PHP will always use the same object.
chiefgeek at ecodedesign.com ¶
22 years ago
xml_set_object is great, if you want to hard code your start_element, end_element, etc functions within your xml class.
But what if you want to increase the modularity of your application?
Solution, create one generic XMLParser class that handles everything *except* the callback funtions. Then create an abstract XMLCallbackHandler class which you can extend to provide any customization you want.
So how do you tell the php's xml_parser that you want to use this other class to handle the callback functions.
xml_set_object? This only works if the functions are *within* the object you called this method from.
The solution lies in the xml_set_element_handler() function.
Take a look at this sample source...
class XMLParser
{
...
function set_callback_handler($callback_handler)
{
// Assign the startElement endElement functions
xml_set_element_handler(
$this->xml_parser,
array($callback_handler, 'start_element'),
array($callback_handler, 'close_Element' ));
/* By passing an array with this ($object, 'function_name') structure
to the 2nd and 3rd parameters. We are able to tell the parser to
look in another object for these callback functions.
*/
// Assign the character data function
xml_set_character_data_handler(
$this->xml_parser,
array($callback_handler, 'character_data'));
}
}
class myCallBackHandler
{
function start_element(...)
{
//code goes here
}
function end_element(...)
{
//code goes here
}
function character_data(...)
{
//code goes here
}
}
Now all thats left to do is use these classes..
$parser = new XMLParser();
$parser->set_callback_handler(new myCallbackHandler());
dfoesch at cs dot nmsu dot edu ¶
22 years ago
English explaination of why you do: $xml = & new xml();
Ok, when PHP executes "new xml()" it creates an anonymous variable (one that you can't reference with any name) which it then runs the constructor function on. Ok, now once that's done, it then assigns by VALUE in the example above. This means that that lovely pointer to your parser is pointing to the anonymous instance of your class, and not the used instance of your class... thus making a "shadow" of all your variables, where assignments inside the parser access different variables than outside the parser. What PHP _SHOULD_ be doing (similar to C++) is have this statement execute such that the assignment is done by REFERENCE, so that you assign the new name to the class that actually got constructed, and not just a copy of the class that you constructed.
If they did it right, this code wouldn't be broken.
Anonymous ¶
22 years ago
Call-time pass-by-reference has been deprecated, so the example is buggy as was already mentionned. However since 4.04 (I think) "new" can return objects by reference. So the clean way to have both the parser initialised in the constructor, and to save the result in your object is to do
$xml_parser = & new xml();
see http://www.php.net/manual/en/language.oop.newref.php
Ivan
pete dot nelson at serverSXPYAZMsolved dot com ¶
23 years ago
<p>in reply to jon9mm's question, I have found the same problem (function 'startElement' does not exist). I finally found the way around this, by re-reading this doc for xml_set_object. You HAVE to use the xml_set_object($this->parser, &$this) within your parser function.</p> <p>When that function is called, your object temporarily becomes the parser object and shares scope (so it can see 'startElement', etc). Once that function is done, the xml_set_object(...) call goes out of scope, and your object is no longer bound to the parser. So the simplist solution is to call xml_set_object(...), do any parsing, and then call xml_parser_free(...) all within the same function.</p>
<p>And remember, don't call xml_set_object(...) in your object's constructor - your object will be forever bound to the parser object and you'll loose all access to your object's member functions.</p>
<p>This is all explained in the examples above, but it took me reading it a couple of times to grok how it all works.</p>
nick at category4 dot com ¶
23 years ago
If you're using the XML parser within an object, be careful not to accidentally call any methods that don't exist within the object. Instead of complaining that the missing method doesn't exist, PHP will say it's not able to find the handler routines, even if you've indicated them correctly. (PHP version 4.0.5 on FreeBSD).
williams at cse dot unl dot edu ¶
23 years ago
If xml_set_object is not called in the constructor of an object, the values that the parser modifies will be saved. Else, the values do not seem to be saved as stated by "i_sofer" above.
--- Start Example Code ---
class foo {
var xmlparser;
function foo() { \\the constructor
$this->xmlparser=xmlparser_create();
}
function parse() {
xml_set_object($this->xmlparser,&$this);
\\also include data handler
\\and element handlers here
}
}
--- End Example Code ---
malcontent at msgto dot com ¶
24 years ago
The example will generate a warning unless allow_call_time_pass_reference is set to true in your INI file. It also will not accept a call by value.
robert at webmotion dot com ¶
24 years ago
While true that there is no automatic destructor for PHP class objects, it is quite simple to create a method called destroy and perform the destruction manually. In the example above it may not be necessary to free the xml parser immediately... it would appear from the example that the object is re-useable.
