Regarding the validity of a UTF-8 string when using the /u pattern modifier, some things to be aware of;
1. If the pattern itself contains an invalid UTF-8 character, you get an error (as mentioned in the docs above - "UTF-8 validity of the pattern is checked since PHP 4.3.5"
2. When the subject string contains invalid UTF-8 sequences / codepoints, it basically result in a "quiet death" for the preg_* functions, where nothing is matched but without indication that the string is invalid UTF-8
3. PCRE regards five and six octet UTF-8 character sequences as valid (both in patterns and the subject string) but these are not supported in Unicode ( see section 5.9 "Character Encoding" of the "Secure Programming for Linux and Unix HOWTO" - can be found at http://www.tldp.org/ and other places )
4. For an example algorithm in PHP which tests the validity of a UTF-8 string (and discards five / six octet sequences) head to: http://hsivonen.iki.fi/php-utf8/
The following script should give you an idea of what works and what doesn't;
<?php
$examples = array(
'Valid ASCII' => "a",
'Valid 2 Octet Sequence' => "\xc3\xb1",
'Invalid 2 Octet Sequence' => "\xc3\x28",
'Invalid Sequence Identifier' => "\xa0\xa1",
'Valid 3 Octet Sequence' => "\xe2\x82\xa1",
'Invalid 3 Octet Sequence (in 2nd Octet)' => "\xe2\x28\xa1",
'Invalid 3 Octet Sequence (in 3rd Octet)' => "\xe2\x82\x28",
'Valid 4 Octet Sequence' => "\xf0\x90\x8c\xbc",
'Invalid 4 Octet Sequence (in 2nd Octet)' => "\xf0\x28\x8c\xbc",
'Invalid 4 Octet Sequence (in 3rd Octet)' => "\xf0\x90\x28\xbc",
'Invalid 4 Octet Sequence (in 4th Octet)' => "\xf0\x28\x8c\x28",
'Valid 5 Octet Sequence (but not Unicode!)' => "\xf8\xa1\xa1\xa1\xa1",
'Valid 6 Octet Sequence (but not Unicode!)' => "\xfc\xa1\xa1\xa1\xa1\xa1",
);
echo "++Invalid UTF-8 in pattern\n";
foreach ( $examples as $name => $str ) {
echo "$name\n";
preg_match("/".$str."/u",'Testing');
}
echo "++ preg_match() examples\n";
foreach ( $examples as $name => $str ) {
preg_match("/\xf8\xa1\xa1\xa1\xa1/u", $str, $ar);
echo "$name: ";
if ( count($ar) == 0 ) {
echo "Matched nothing!\n";
} else {
echo "Matched {$ar[0]}\n";
}
}
echo "++ preg_match_all() examples\n";
foreach ( $examples as $name => $str ) {
preg_match_all('/./u', $str, $ar);
echo "$name: ";
$num_utf8_chars = count($ar[0]);
if ( $num_utf8_chars == 0 ) {
echo "Matched nothing!\n";
} else {
echo "Matched $num_utf8_chars character\n";
}
}
?>
Modificadores de patrones
Los modificadores PCRE disponibles son listados a continuación. Los nombres entre paréntesis se refieren a nombres internos de PCRE para dichos modificadores. Los espacios y nuevas líneas son ignorados en los modificadores, otros caracteres generan error.
- i (
PCRE_CASELESS)- Si se aplica este modificador, las letras en el patrón coincidirán tanto con letras mayúsculas como minúsculas.
- m (
PCRE_MULTILINE)- Por defecto, PCRE trata la cadena objetivo como si fuera una única "línea" de caracteres (incluso si en realidad contiene varias nuevas líneas). El meta-carácter "inicio de línea" (^) coincide sólo con el inicio de la cadena, mientras que el meta-carácter "final de línea" ($) coincide sólo con el final de la cadena, o antes del final de una nueva línea (a menos que el modificador D se aplique). Esto es igual que en Perl. Cuando se aplica este modificador, los constructores "inicio de línea" y "final de línea" coinciden inmediatamente después o inmediatamente antes que cualquier nueva línea de la cadena objetivo, respectivamente, así como al inicio y final absolutos. Esto es equivalente al modificador /m de Perl. Si no hay caracteres "\n" en una cadena objetivo, o no hay incidencias de ^ o $ en el patrón, la aplicación de este modificador no tiene efecto.
- s (
PCRE_DOTALL)- Si se aplica este modificador, un meta-carácter punto en el patrón coincide con todos los caracteres, incluyendo nuevas líneas. Sin él, las nuevas líneas son excluidas. Este modificador es equivalente al modificador /s de Perl. Una clase negativa como [^a] siempre coincidirá con un carácter de nueva línea, independientemente de la aplicación de este modificador.
- x (
PCRE_EXTENDED)- Si se aplica este modificador, los caracteres de información de espacios en blanco en el patrón se ignoran totalmente excepto cuando están escapados o dentro de una clase carácter, y los caracteres entre un # sin escapar fuera de una clase carácter y el siguiente carácter nueva línea, inclusive, también son ignorados. Esto es equivalente al modificador /x de Perl, y hace posible incluir comentarios dentro de patrones complicados. Observe, sin embargo, que esto se aplica sólo a caracteres de información. Los caracteres espacio en blanco nunca pueden aparecer dentro de secuencias de caracteres especiales en un patrón, por ejemplo dentro de la secuencia (?( la cual inicia un sub-patrón condicional.
- A (
PCRE_ANCHORED)- Si se aplica este modificador, el patrón es forzado a ser "anclado", es decir, se le obliga a coincidir sólo con el inicio de la cadena que está siendo buscada (la "cadena objetivo"). Este efecto también se puede lograr mediante construcciones apropiadas en el patrón mismo, lo cual es la única manera de hacerlo en Perl.
- D (
PCRE_DOLLAR_ENDONLY)- Si se aplica este modificador, un meta-carácter dólar en el patrón coincidirá sólo con el final de la cadena objetivo. Sin este modificador, un dólar coincide también inmediatamente antes del carácter final si éste es una nueva línea (pero no antes de cualquier otra nueva línea). Este modificador es ignorado si el modificadr m se aplica. No existe equivalente a este modificador en Perl.
- S
- Cuando un patrón se va a usar varias veces, merece la pena dedicar más tiempo a analizarlo a fin de acelerar el tiempo tomado para las comparaciones. Si se aplica este modificador, se realiza este análisis extra. Actualmente, estudiar un patrón es útil sólamente para patrones no anclados que no tienen un carácter de inicio único fijo.
- U (
PCRE_UNGREEDY)- Este modificador invierte la "codicia" de los cuantificadores de modo que no sean codiciosos por defecto, pero se vuelven codiciosos si son seguidos por
?. Esto no es compatible con Perl. También se puede aplicar por un modificador de ajuste dentro del patrón (?U) o por un signo de interrogación detrás del cuantificador (p.ej..*?).Nota:
Normalmente no es posible hacer coincidir más de pcre.backtrack_limit caracteres en el modo no codicioso.
- X (
PCRE_EXTRA)- Este modificador pone en marcha funcionalidad adicional de PCRE que es incompatible con Perl. Cualquier barra invertida en un patrón que esté seguida por una letra que no tenga un significado especial causa un error, por lo que se reservan estas combinaciones para futuras expansiones. Por defecto, como en Perl, una barra invertida seguida de una letra que no tenga un significado especial se trata como un literal. No hay en la actualidad otras características controladas por este modificador.
- J (
PCRE_INFO_JCHANGED)- El ajuste de opción interna (?J) cambia la opción local
PCRE_DUPNAMES. Permite nombres duplicados para sub-patrones.- u (
PCRE_UTF8)- Este modificador pone en marcha funcionalidad adicional de PCRE que es incompatible con Perl. Los string de patrones y objetivos son tratados como UTF-8. Este modificador está disponible a partir de PHP 4.1.0 o posterior en Unix y desde PHP 4.2.3 en win32. La validez de UTF-8 del patrón y del objetivo es verificada desde PHP 4.3.5. Un objetivo inválido causará que la función preg_* no haga coincidir nada; un patrón inválido desencadenará un error de nivel E_WARNING. Las secuencias UTF-8 de cinco o seis octetos se consideran como no válidas desde PHP 5.3.4 (resp. PCRE 7.3 2007-08-28); anteriormente se consideraban como UTF-8 válido.
add a note
User Contributed Notes 12 notes
hfuecks at nospam dot org ¶
19 years ago
Anonymous ¶
5 years ago
A warning about the /i modifier and POSIX character classes:
If you're using POSIX character classes in your regex that indicate case such as [:upper:] or [:lower:] in combination with the /i modifier, then in PHP < 7.3 the /i modifier will take precedence and effectively make both those character classes work as [:alpha:], but in PHP >= 7.3 the character classes overrule the /i modifier.
varrah NO_GARBAGE_OR_SPAM AT mail DOT ru ¶
19 years ago
Spent a few days, trying to understand how to create a pattern for Unicode chars, using the hex codes. Finally made it, after reading several manuals, that weren't giving any practical PHP-valid examples. So here's one of them:
For example we would like to search for Japanese-standard circled numbers 1-9 (Unicode codes are 0x2460-0x2468) in order to make it through the hex-codes the following call should be used:
preg_match('/[\x{2460}-\x{2468}]/u', $str);
Here $str is a haystack string
\x{hex} - is an UTF-8 hex char-code
and /u is used for identifying the class as a class of Unicode chars.
Hope, it'll be useful.
Daniel Klein ¶
12 years ago
If the _subject_ contains utf-8 sequences the 'u' modifier should be set, otherwise a pattern such as /./ could match a utf-8 sequence as two to four individual ASCII characters. It is not a requirement, however, as you may have a need to break apart utf-8 sequences into single bytes. Most of the time, though, if you're working with utf-8 strings you should use the 'u' modifier.
If the subject doesn't contain any utf-8 sequences (i.e. characters in the range 0x00-0x7F only) but the pattern does, as far as I can work out, setting the 'u' modifier would have no effect on the result.
arash dot dalir at gmail dot com ¶
7 years ago
the PCRE_INFO_JCHANGED modifier is apparently not accepted as a global option (after the closing delimiter) in PHP versions <= 5.4 (not checked in PHP 5.5) but allowed in PHP 5.6 (also not checked in PHP 7.X)
The following pattern doesn't work in PHP 5.4, but it works in PHP 5.6:
<?php
//test.php
preg_match_all('/(?<dup_name>\d{1,4})\-(?<dup_name>\d{1,2})/J', '1234-23', $matches);
var_dump($matches);
/*
output in PHP 5.4:
Warning: preg_match_all(): Unknown modifier 'J' in test.php on line 3
NULL
--------------
output PHP 5.6:
array(4) {
[0]=> array(1) { [0]=> string(7) "1234-23" }
["dup_name"]=> array(1) { [0]=> string(2) "23" }
[1]=> array(1) { [0]=> string(4) "1234" }
[2]=> array(1) { [0]=> string(2) "23" }
}
*/
?>
in order to resolve this issue in PHP 5.4, one can use the (?J) pattern modifier, which indicates the pattern (from that point forward) allows duplicate names for subpatterns.
code which works in PHP 5.4:
<?php
preg_match_all('/(?J)(?<dup_name>\d{1,4})\-(?<dup_name>\d{1,2})/', '1234-23', $matches);
var_dump($matches);
/*
output in PHP 5.4:
array(4) {
[0]=> array(1) { [0]=> string(7) "1234-23" }
["dup_name"]=> array(1) { [0]=> string(2) "23" }
[1]=> array(1) { [0]=> string(4) "1234" }
[2]=> array(1) { [0]=> string(2) "23" }
}
--------------
output in PHP 5.6 (the same as with /J):
array(4) {
[0]=> array(1) { [0]=> string(7) "1234-23" }
["dup_name"]=> array(1) { [0]=> string(2) "23" }
[1]=> array(1) { [0]=> string(4) "1234" }
[2]=> array(1) { [0]=> string(2) "23" }
}
*/
?>
Hayley Watson ¶
4 years ago
Starting from 7.3.0, the 'S' modifier has no effect; this analysis is now always done by the PCRE engine.
phpman at crustynet dot org dot uk ¶
13 years ago
The description of the "u" flag is a bit misleading. It suggests that it is only required if the pattern contains UTF-8 characters, when in fact it is required if either the pattern or the subject contain UTF-8. Without it, I was having problems with preg_match_all returning invalid multibyte characters when given a UTF-8 subject string.
It's fairly clear if you read the documentation for libpcre:
In order process UTF-8 strings, you must build PCRE to include UTF-8
support in the code, and, in addition, you must call pcre_compile()
with the PCRE_UTF8 option flag, or the pattern must start with the
sequence (*UTF8). When either of these is the case, both the pattern
and any subject strings that are matched against it are treated as
UTF-8 strings instead of strings of 1-byte characters.
[from http://www.pcre.org/pcre.txt]
Wirek ¶
6 years ago
An important addendum (with new $pat3_2 utilising \R properly, its results and comments):
Note that there are (sometimes difficult to grasp at first glance) nuances of meaning and application of escape sequences like \r, \R and \v - none of them is perfect in all situations, but they are quite useful nevertheless. Some official PCRE control options and their changes come in handy too - unfortunately neither (*ANYCRLF), (*ANY) nor (*CRLF) is documented here on php.net at the moment (although they seem to be available for over 10 years and 5 months now), but they are described on Wikipedia ("Newline/linebreak options" at https://en.wikipedia.org/wiki/Perl_Compatible_Regular_Expressions) and official PCRE library site ("Newline convention" at http://www.pcre.org/original/doc/html/pcresyntax.html#SEC17) pretty well. The functionality of \R appears somehow disappointing (with default configuration of compile time option) according to php.net as well as official description ("Newline sequences" at https://www.pcre.org/original/doc/html/pcrepattern.html#newlineseq) when used improperly.
A hint for those of you who are trying to fight off (or work around at least) the problem of matching a pattern correctly at the end (or at the beginning) of any line even without the multiple lines mode (/m) or meta-character assertions ($ or ^).
<?php
// Various OS-es have various end line (a.k.a line break) chars:
// - Windows uses CR+LF (\r\n);
// - Linux LF (\n);
// - OSX CR (\r).
// And that's why single dollar meta assertion ($) sometimes fails with multiline modifier (/m) mode - possible bug in PHP 5.3.8 or just a "feature"(?) of default configuration option for meta-character assertions (^ and $) at compile time of PCRE.
$str="ABC ABC\n\n123 123\r\ndef def\rnop nop\r\n890 890\nQRS QRS\r\r~-_ ~-_";
// C 3 p 0 _
$pat3='/\w\R?$/mi'; // Somehow disappointing according to php.net and pcre.org when used improperly
$pat3_2='/\w(?=\R)/i'; // Much better with allowed lookahead assertion (just to detect without capture) without multiline (/m) mode; note that with alternative for end of string ((?=\R|$)) it would grab all 7 elements as expected, but '/(*ANYCRLF)\w$/mi' is more straightforward in use anyway
$p=preg_match_all($pat3, $str, $m3);
$r=preg_match_all($pat3_2, $str, $m4);
echo $str."\n3 !!! $pat3 ($p): ".print_r($m3[0], true)
."\n3_2 !!! $pat3_2 ($r): ".print_r($m4[0], true);
// Note the difference between the two very helpful escape sequences in $pat3 and $pat3_2 (\R) - for some applications at least.
/* The code above results in the following output:
ABC ABC
123 123
def def
nop nop
890 890
QRS QRS
~-_ ~-_
3 !!! /\w\R?$/mi (5): Array
(
[0] => C
[1] => 3
[2] => p
[3] => 0
[4] => _
)
3_2 !!! /\w(?=\R)/i (6): Array
(
[0] => C
[1] => 3
[2] => f
[3] => p
[4] => 0
[5] => S
)
*/
?>
Unfortunately, I haven't got any access to a server with the latest PHP version - my local PHP is 5.3.8 and my public host's PHP is version 5.2.17.
michal dot kocarek at brainbox dot cz ¶
15 years ago
In case you're wondering, what is the meaning of "S" modifier, this paragraph might be useful:
When "S" modifier is set, PHP calls the pcre_study() function from the PCRE API before executing the regexp. Result from the function is passed directly to pcre_exec().
For more information about pcre_study() and "Studying the pattern" check the PCRE manual on http://www.pcre.org/pcre.txt
PS: Note that function names "pcre_study" and "pcre_exec" used here refer to PCRE library functions written in C language and not to any PHP functions.
Wirek ¶
6 years ago
A hint for those of you who are trying to fight off (or work around at least) the problem of matching a pattern correctly at the end ($) of any line in multiple lines mode (/m).
<?php
// Various OS-es have various end line (a.k.a line break) chars:
// - Windows uses CR+LF (\r\n);
// - Linux LF (\n);
// - OSX CR (\r).
// And that's why single dollar meta assertion ($) sometimes fails with multiline modifier (/m) mode - possible bug in PHP 5.3.8 or just a "feature"(?).
$str="ABC ABC\n\n123 123\r\ndef def\rnop nop\r\n890 890\nQRS QRS\r\r~-_ ~-_";
// C 3 p 0 _
$pat1='/\w$/mi'; // This works excellent in JavaScript (Firefox 7.0.1+)
$pat2='/\w\r?$/mi';
$pat3='/\w\R?$/mi'; // Somehow disappointing according to php.net and pcre.org
$pat4='/\w\v?$/mi';
$pat5='/(*ANYCRLF)\w$/mi'; // Excellent but undocumented on php.net at the moment
$n=preg_match_all($pat1, $str, $m1);
$o=preg_match_all($pat2, $str, $m2);
$p=preg_match_all($pat3, $str, $m3);
$r=preg_match_all($pat4, $str, $m4);
$s=preg_match_all($pat5, $str, $m5);
echo $str."\n1 !!! $pat1 ($n): ".print_r($m1[0], true)
."\n2 !!! $pat2 ($o): ".print_r($m2[0], true)
."\n3 !!! $pat3 ($p): ".print_r($m3[0], true)
."\n4 !!! $pat4 ($r): ".print_r($m4[0], true)
."\n5 !!! $pat5 ($s): ".print_r($m5[0], true);
// Note the difference among the three very helpful escape sequences in $pat2 (\r), $pat3 (\R), $pat4 (\v) and altered newline option in $pat5 ((*ANYCRLF)) - for some applications at least.
/* The code above results in the following output:
ABC ABC
123 123
def def
nop nop
890 890
QRS QRS
~-_ ~-_
1 !!! /\w$/mi (3): Array
(
[0] => C
[1] => 0
[2] => _
)
2 !!! /\w\r?$/mi (5): Array
(
[0] => C
[1] => 3
[2] => p
[3] => 0
[4] => _
)
3 !!! /\w\R?$/mi (5): Array
(
[0] => C
[1] => 3
[2] => p
[3] => 0
[4] => _
)
4 !!! /\w\v?$/mi (5): Array
(
[0] => C
[1] => 3
[2] => p
[3] => 0
[4] => _
)
5 !!! /(*ANYCRLF)\w$/mi (7): Array
(
[0] => C
[1] => 3
[2] => f
[3] => p
[4] => 0
[5] => S
[6] => _
)
*/
?>
Unfortunately, I haven't got any access to a server with the latest PHP version - my local PHP is 5.3.8 and my public host's PHP is version 5.2.17.
ebarnard at marathonmultimedia dot com ¶
17 years ago
When adding comments with the /x modifier, don't use the pattern delimiter in the comments. It may not be ignored in the comments area. Example:
<?php
$target = 'some text';
if(preg_match('/
e # Comments here
/x',$target)) {
print "Target 1 hit.\n";
}
if(preg_match('/
e # /Comments here with slash
/x',$target)) {
print "Target 1 hit.\n";
}
?>
prints "Target 1 hit." but then generates a PHP warning message for the second preg_match():
Warning: preg_match() [function.preg-match]: Unknown modifier 'C' in /ebarnard/x-modifier.php on line 11
damian dot driscoll at gmail dot com ¶
7 years ago
The PCRE_INFO_JCHANGED modifier works in version 5.6.31 but not in 5.6.16, which generates an 'unknown modifier J' warning.
