If you want to copy one file at a time and remove the folder name that is stored in the ZIP file, so you don't have to create directories from the ZIP itself, then use this snippet (basically collapses the ZIP file into one Folder).
<?php
$path = 'zipfile.zip'
$zip = new ZipArchive;
if ($zip->open($path) === true) {
for($i = 0; $i < $zip->numFiles; $i++) {
$filename = $zip->getNameIndex($i);
$fileinfo = pathinfo($filename);
copy("zip://".$path."#".$filename, "/your/new/destination/".$fileinfo['basename']);
}
$zip->close();
}
?>
* On a side note, you can also use $_FILES['userfile']['tmp_name'] as the $path for an uploaded ZIP so you never have to move it or extract a uploaded zip file.
Cheers!
ProNeticas Dev Team
ZipArchive::extractTo
(PHP 5 >= 5.2.0, PHP 7, PHP 8, PECL zip >= 1.1.0)
ZipArchive::extractTo — Extraer el contenido del archivo
Descripción
Extrae el archivo completo o los ficheros dados en la ruta que se especifique.
Advertencia
Los permisos por omisión para los archivos y directorios extraídos dan el más amplio acceso posible. Esto se puede restringir estableciendo la umask actual, que se puede cambiar usando umask().
Parámetros
-
pathto -
Destino en donde extraer los ficheros.
-
files -
Las entradas a extraer. Acepta tanto un solo nombre o un array de nombres.
Valores devueltos
Devuelve true en caso de éxito o false en caso de error.
Ejemplos
Ejemplo #1 Extraer todas las entradas
<?php
$zip = new ZipArchive;
if ($zip->open('test.zip') === TRUE) {
$zip->extractTo('/my/destination/dir/');
$zip->close();
echo 'ok';
} else {
echo 'failed';
}
?>Ejemplo #2 Extraer dos entradas
<?php
$zip = new ZipArchive;
$res = $zip->open('test_im.zip');
if ($res === TRUE) {
$zip->extractTo('/my/destination/dir/', array('pear_item.gif', 'testfromfile.php'));
$zip->close();
echo 'ok';
} else {
echo 'failed';
}
?>Notas
Nota:
Windows NTFS file systems do not support some characters in filenames, namely
<|>*?":. Filenames with a trailing dot are not supported either. Contrary to some extraction tools, this method does not replace these characters with an underscore, but instead fails to extract such files.
add a note
User Contributed Notes 16 notes
php-dev at proneticas dot net ¶
14 years ago
Anonymous ¶
6 years ago
If you want to extract the files just to the current folder, simply use
$zip->extractTo(".");
It took me hours to figure this out.
cucurella at gmail dot com ¶
3 years ago
// Handling ERROR file by file !!
<?php
$ERROR_UNZIP = false;
$dest = "../";
$zipfile = "test.zip";
$zip = new ZipArchive;
if ($zip->open("$zipfile") === true) {
for ($i = 0; $i < $zip -> numFiles; $i++) {
$RETVAL = false;
$filename = $zip->getNameIndex($i);
$RETVAL = $zip->extractTo($dest,$filename);
if ($RETVAL) {
print "$filename ... [ OK ]<br>";
} else {
print "$filename ... [ ERROR ]<br>";
$ERROR_UNZIP = true;
}
}
// close
$zip -> close();
// retval
if ($ERROR_UNZIP) {
print "<p>ERROR unziping ${zipfile}</p>";
} else {
print "<p>Unzip OK</p>";
}
} else {
print "<p>ERROR opening ${zipfile}</p>";
}
?>
stanislav dot eckert at vizson dot de ¶
10 years ago
The extractTo() method does not offer any parameter to allow extracting files and folders recursively from another (parent) folder inside the ZIP archive. With the following method it is possible:
<?php
class my_ZipArchive extends ZipArchive
{
public function extractSubdirTo($destination, $subdir)
{
$errors = array();
// Prepare dirs
$destination = str_replace(array("/", "\\"), DIRECTORY_SEPARATOR, $destination);
$subdir = str_replace(array("/", "\\"), "/", $subdir);
if (substr($destination, mb_strlen(DIRECTORY_SEPARATOR, "UTF-8") * -1) != DIRECTORY_SEPARATOR)
$destination .= DIRECTORY_SEPARATOR;
if (substr($subdir, -1) != "/")
$subdir .= "/";
// Extract files
for ($i = 0; $i < $this->numFiles; $i++)
{
$filename = $this->getNameIndex($i);
if (substr($filename, 0, mb_strlen($subdir, "UTF-8")) == $subdir)
{
$relativePath = substr($filename, mb_strlen($subdir, "UTF-8"));
$relativePath = str_replace(array("/", "\\"), DIRECTORY_SEPARATOR, $relativePath);
if (mb_strlen($relativePath, "UTF-8") > 0)
{
if (substr($filename, -1) == "/") // Directory
{
// New dir
if (!is_dir($destination . $relativePath))
if (!@mkdir($destination . $relativePath, 0755, true))
$errors[$i] = $filename;
}
else
{
if (dirname($relativePath) != ".")
{
if (!is_dir($destination . dirname($relativePath)))
{
// New dir (for file)
@mkdir($destination . dirname($relativePath), 0755, true);
}
}
// New file
if (@file_put_contents($destination . $relativePath, $this->getFromIndex($i)) === false)
$errors[$i] = $filename;
}
}
}
}
return $errors;
}
}
?>
Example:
<?php
echo "<pre>";
$zip = new my_ZipArchive();
if ($zip->open("test.zip") === TRUE)
{
$errors = $zip->extractSubdirTo("C:/output", "folder/subfolder/");
$zip->close();
echo 'ok, errors: ' . count($errors);
}
else
{
echo 'failed';
}
?>
kawzaki at yahoo dot com ¶
15 years ago
Please be aware of the fact that using this function has OVERWRITE true.
an old file will be overwritten if the achieve (zipped file) contains file matching the same old file name.
old files that has no match in the zip, will be kept as is.
hopefully the someone will explain how to avoid overwriting old files.
synnus at gmail dot com ¶
7 years ago
<?php
// This version allows to see which file will be decompressed and to keep
// a follow-up on decompression
define( 'FILEPATH', dirname(__FILE__) . '\\' );
define( 'TEST', FILEPATH . 'test\\' );
$za = new ZipArchive();
$za->open(FILEPATH . 'test.zip');
print_r($za);
var_dump($za);
echo "Nombre de fichiers : " . $za->numFiles . "\n";
echo "Statut : " . $za->status . "\n";
echo "Statut du système : " . $za->statusSys . "\n";
echo "Nom du fichier : " . $za->filename . "\n";
echo "Commentaire : " . $za->comment . "\n";
/* in $za->statIndex($i)
[name] => data/x.luac
[index] => 451
[crc] => -1266183263
[size] => 2936
[mtime] => 1464790482
[comp_size] => 976
[comp_method] => 8
*/
for ($i=0; $i<$za->numFiles;$i++) {
echo "index : $i\n";
$name = $za->statIndex($i)['name'];
$size = $za->statIndex($i)['size'];
$comp_size = $za->statIndex($i)['comp_size'];
print_r($name . ' [ ' . $size . '>' . $comp_size . ']' );
$za->extractTo(TEST,$name);
}
echo "Nombre de fichiers :" . $za->numFiles . "\n";
?>
quake2005 at gmail dot com ¶
14 years ago
If you want to extract one file at a time, you can use this:
<?php
$path = 'zipfile.zip'
$zip = new ZipArchive;
if ($zip->open($path) === true) {
for($i = 0; $i < $zip->numFiles; $i++) {
$zip->extractTo('path/to/extraction/', array($zip->getNameIndex($i)));
// here you can run a custom function for the particular extracted file
}
$zip->close();
}
?>
cory dot mawhorter at ephective dot com ¶
14 years ago
This function will flatten a zip file using the ZipArchive class.
It will extract all the files in the zip and store them in a single destination directory. That is, no sub-directories will be created.
If anyone knows a better way to determine if an entry is a directory, please chime in. I feel dirty checking for a trailing slash.
<?php
// dest shouldn't have a trailing slash
function zip_flatten ( $zipfile, $dest='.' )
{
$zip = new ZipArchive;
if ( $zip->open( $zipfile ) )
{
for ( $i=0; $i < $zip->numFiles; $i++ )
{
$entry = $zip->getNameIndex($i);
if ( substr( $entry, -1 ) == '/' ) continue; // skip directories
$fp = $zip->getStream( $entry );
$ofp = fopen( $dest.'/'.basename($entry), 'w' );
if ( ! $fp )
throw new Exception('Unable to extract the file.');
while ( ! feof( $fp ) )
fwrite( $ofp, fread($fp, 8192) );
fclose($fp);
fclose($ofp);
}
$zip->close();
}
else
return false;
return $zip;
}
/*
Example Usage:
zip_flatten( 'test.zip', 'my/path' );
*/
?>
[EDIT BY danbrown AT php DOT net: Added $zip-close() per indication by original poster in follow-up note on 18-APR-2010.]
skrzypecki at gmail dot com ¶
7 years ago
Please note that the path can not be to long! I am not sure what the maximum length is, didnt find any information about that. But i kept getting issues when using extractTo().
Than after google i found this little comment: https://github.com/composer/composer/issues/2824#issuecomment-308201902
CopyPasted comment:
===
I had this path in my machine:
C:/xampp5.0/htdocs/project-recordando-symfony/project-recordando-symfony
Then I ran composer install or/and composer update and it returned this error:
ErrorException ZipArchive::extractTo...
That error is because your path is too much long, I changed to:
C:/xampp5.0/htdocs/p-symfony/*
and worked!
===
sachinyadav at live dot com ¶
14 years ago
This script will search for ".txt" file(any file name) inside test.zip archive. Suppose, 'example.txt' file is found then the script will copy 'example.txt' to "txt_files" directory and rename it to 'test.zip.txt' and will remove all the blank lines from 'test.zip.txt' and resave and will exit the loop without searching remaining entries.
This script can be useful to extract .DIZ and GIF files to display ZIP archive details in your script.
<?php
$value="test.zip";
$filename="zip_files/$value";
$zip = new ZipArchive;
if ($zip->open($filename) === true) {
echo "Generating TEXT file.";
for($i = 0; $i < $zip->numFiles; $i++) {
$entry = $zip->getNameIndex($i);
if(preg_match('#\.(txt)$#i', $entry))
{
////This copy function will move the entry to the root of "txt_files" without creating any sub-folders unlike "ZIP->EXTRACTO" function.
copy('zip://'.dirname(__FILE__).'/zip_files/'.$value.'#'.$entry, 'txt_files/'.$value.'.txt');
$content = file_get_contents("txt_files/$value.txt");
$newcontent = preg_replace("/(^[\r\n]*|[\r\n]+)[\s\t]*[\r\n]+/", "\n", $content);
file_put_contents("txt_files/$value.txt", "$newcontent");
break;
}
}
$zip->close();
}
else{
echo "ZIP archive failed";
}
?>
enjoy PHP programming.
Sachin Yadav
tBone ¶
16 years ago
This function, at least from my experience, maintains/forces the directory structure within the ZIP file.
ie. if you have FOLDER1/File1.txt in the zip file and you use
$zip->extractTo('/extract', 'FOLDER1/File1.txt');
the location of the extracted file will be:
/extract/FOLDER1/File1.txt
ben dot tyger at tygerclan dot net ¶
8 years ago
Note, in Linux (possibly other *nix platforms too) there is no way to extract hidden files ( aka filename starting with a '.') from a Zip archive.
ohcc at 163 dot com ¶
7 years ago
WARNING!!!!
if you are running php under Apache, a .htaccess file inside the zip file may fail the extractTo() method.
Anonymous ¶
15 years ago
I found it useful to add this to a function.
<?php
/**
* Extracts a ZIP archive to the specified extract path
*
* @param string $file The ZIP archive to extract (including the path)
* @param string $extractPath The path to extract the ZIP archive to
*
* @return boolean TURE if the ZIP archive is successfully extracted, FALSE if there was an errror
*
*/
function zip_extract($file, $extractPath) {
$zip = new ZipArchive;
$res = $zip->open($file);
if ($res === TRUE) {
$zip->extractTo($extractPath);
$zip->close();
return TRUE;
} else {
return FALSE;
}
} // end function
?>
Anonymous ¶
15 years ago
I am using this function to extract a specific folder and it's contents from a zip file:
<?php
function extractDir($zipfile, $path) {
if (file_exists($zipfile)) {
$files = array();
$zip = new ZipArchive;
if ($zip->open($zipfile) === TRUE) {
for($i = 0; $i < $zip->numFiles; $i++) {
$entry = $zip->getNameIndex($i);
//Use strpos() to check if the entry name contains the directory we want to extract
if (strpos($entry, "/MyFolder/")) {
//Add the entry to our array if it in in our desired directory
$files[] = $entry;
}
}
//Feed $files array to extractTo() to get only the files we want
if ($zip->extractTo($path, $files) === TRUE) {
return TRUE;
} else {
return FALSE;
}
$zip->close();
} else {
return FALSE;
}
} else {
return FALSE;
}
}
//Run the function
if (extractDir($zipfile, $path)) {
$extracted = "YES! :-D";
} else {
$extracted = "NO! :*(";
}
echo $extracted;
?>
icixtec at gmail dot com ¶
4 years ago
Para casos donde sea necesario descomprimir archivos sin saber si el nombre está en mayúsculas o minúsculas:
$zip = new ZipArchive;
if ($zip->open('myfile.zip') === TRUE) {
//no funciona
//$zip->extractTo('./', array( 'file1.XML', 'file1.xml'));
//funciona
$zip->extractTo('./', 'file1.XML' );
$zip->extractTo('./', 'file1.xml' );
$zip->close();
}
