Gestion des connexions

Le statut des connexions est conservé en interne par PHP. Il y a quatre états possibles :

0 - NORMAL (normal)
1 - ABORTED (annulé)
2 - TIMEOUT (périmé)
3 - ABORTED and TIMEOUT (annulé et périmé)

Lorsqu'un script PHP est en cours d'exécution, l'état est NORMAL. Si le client distant se déconnecte, le statut devient ABORTED. Une déconnexion du client distant est généralement causé par les utilisateurs appuyant sur leurs bouton STOP. Si la durée maximale d'exécution de PHP est dépassée, (voir set_time_limit()), le script prend le statut TIMEOUT.

Vous pouvez en outre décider si vous voulez que la déconnexion d'un client provoque l'arrêt de votre script. Il est parfois pratique que vos scripts continuent à s'exécuter jusqu'à la fin, même si le client n'est plus là pour recevoir les informations. Cependant, par défaut, le script s'arrêtera dès que le client se déconnecte. Ce comportement peut être modifié avec la directive ignore_user_abort dans le fichier php.ini ou bien avec la directive Apache php_value ignore_user_abort du fichier Apache httpd.conf ou avec la fonction ignore_user_abort(). Si vous ne demandez pas à PHP d'ignorer la déconnexion, et que l'utilisateur se déconnecte, le script sera terminé. La seule exception est si vous avez enregistré une fonction de fermeture, avec register_shutdown_function(). Avec une telle fonction, lorsque l'utilisateur interrompt sa requête, à la prochaine exécution du script, PHP va s'apercevoir que le dernier script n'a pas été terminé, et il va déclencher la fonction de fermeture. Cette fonction sera aussi appelée à la fin du script, si celui-ci se termine normalement. Pour pouvoir avoir un comportement différent suivant l'état du script lors de sa finalisation, vous pouvez exécutez des commandes spécifiques à la déconnexion grâce à la commande connection_aborted(). Cette fonction retournera true si la connexion a été annulée.

Votre script peut aussi être automatiquement interrompu après une certaine durée. Par défaut, le délai est de 30 secondes. Cette valeur peut être changée en utilisant la directive PHP max_execution_time dans le fichier php.ini ou avec la directive php_value max_execution_time, dans le fichier Apache httpd.conf ou encore avec la fonction set_time_limit(). Lorsque le délai expire, le script est terminé, et comme pour la déconnexion du client, une fonction de terminaison sera appelée. Dans cette fonction, vous pouvez savoir si c'est le délai d'expiration qui a causé la fin du script, en appelant la fonction connection_status(). Cette fonction retournera 2 si le délai d'expiration a été dépassé.

Une chose à noter est que les deux cas ABORTED et TIMEOUT peuvent être appelés en même temps. Ceci est possible si vous demandez à PHP d'ignorer les déconnexions des utilisateurs. PHP va quand même noter le fait que l'utilisateur s'est déconnecté, mais le script va continuer. Puis, lorsqu'il atteint la limite de temps, le script va expirer. À ce moment-là, la fonction connection_status() retournera 3.

add a note

User Contributed Notes 12 notes

down

tom lgold2003 at gmail dot com ¶

15 years ago


hey, thanks to arr1, and it is very useful for me, when I need to return to the user fast and then do something else.

When using the codes, it nearly drive me mad and I found another thing that may affect the codes:

Content-Encoding: gzip

This is because the zlib is on and the content will be compressed. But this will not output the buffer until all output is over.

So, it may need to send the header to prevent this problem.

now, the code becomes:

<?php
ob_end_clean();
header("Connection: close\r\n");
header("Content-Encoding: none\r\n");
ignore_user_abort(true); // optional
ob_start();
echo ('Text user will see');
$size = ob_get_length();
header("Content-Length: $size");
ob_end_flush();     // Strange behaviour, will not work
flush();            // Unless both are called !
ob_end_clean();

//do processing here
sleep(5);

echo('Text user will never see');
//do some processing
?>

down

arr1 at hotmail dot co dot uk ¶

18 years ago


Closing the users browser connection whilst keeping your php script running has been an issue since 4.1, when the behaviour of register_shutdown_function() was modified so that it would not automatically close the users connection.

sts at mail dot xubion dot hu
Posted the original solution:

<?php
header("Connection: close");
ob_start();
phpinfo();
$size=ob_get_length();
header("Content-Length: $size");
ob_end_flush();
flush();
sleep(13);
error_log("do something in the background");
?>

Which works fine until you substitute phpinfo() for 
echo ('text I want user to see'); in which case the headers are never sent!

The solution is to explicitly turn off output buffering and clear the buffer prior to sending your header information.

example:

<?php
 ob_end_clean();
 header("Connection: close");
 ignore_user_abort(); // optional
 ob_start();
 echo ('Text the user will see');
 $size = ob_get_length();
 header("Content-Length: $size");
 ob_end_flush(); // Strange behaviour, will not work
 flush();            // Unless both are called !
 // Do processing here 
 sleep(30);
 echo('Text user will never see');
?>
 
Just spent 3 hours trying to figure this one out, hope it helps someone :)

Tested in:
IE 7.5730.11
Mozilla Firefox 1.81

down

mheumann at comciencia dot cl ¶

11 years ago


I had a lot of problems getting a redirect to work, after which my script was intended to keep working in the background. The redirect to another page of my site simply would only work once the original page had finished processing.

I finally found out what was wrong:
The session only gets closed by PHP at the very end of the script, and since access to the session data is locked to prevent more than one page writing to it simultaneously, the new page cannot load until the original processing has finished.

Solution:
Close the session manually when redirecting using session_write_close():

<?php
ignore_user_abort(true);
set_time_limit(0);

$strURL = "PUT YOUR REDIRCT HERE";
header("Location: $strURL", true);
header("Connection: close", true);
header("Content-Encoding: none\r\n");
header("Content-Length: 0", true);

flush();
ob_flush();

session_write_close();

// Continue processing...

sleep(100);
exit;
?>

But careful:
Make sure that your script doesn't write to the session after session_write_close(), i.e. in your background processing code.  That won't work.  Also avoid reading, remember, the next script may already have modified the data.

So try to read out the data you need prior to redirecting.

down

a1n2ton at gmail dot com ¶

15 years ago


PHP changes directory on connection abort so code like this will not do what you want:

<?php
function abort()
{
     if(connection_aborted())
           unlink('file.ini');
}
register_shutdown_function('abort');
?>

actually it will delete file in apaches's root dir so if you want to unlink file in your script's dir on abort or write to it you have to store directory
<?php
function abort()
{
     global $dsd;
     if(connection_aborted())
           unlink($dsd.'/file.ini');
}
register_shutdown_function('abort');
$dsd=getcwd();
?>

down

Lee ¶

20 years ago


The point mentioned in the last comment isn't always the case.

If a user's connection is lost half way through an order processing script is confirming a user's credit card/adding them to a DB, etc (due to their ISP going down, network trouble... whatever) and your script tries to send back output (such as, "pre-processing order" or any other type of confirmation), then your script will abort -- and this could cause problems for your process.

I have an order script that adds data to a InnoDB database (through MySQL) and only commits the transactions upon successful completion. Without ignore_user_abort(), I have had times when a user's connection dropped during the processing phase... and their card was charged, but they weren't added to my local DB.

So, it's always safe to ignore any aborts if you are processing sensitive transactions that should go ahead, whether your user is "watching" on the other end or not.

down

Marco ¶

7 years ago


The CONNECTION_XXX constants that are not listed here for some reason are:

0 = CONNECTION_NORMAL
1 = CONNECTION_ABORTED
2 = CONNECTION_TIMEOUT
3 = CONNECTION_ABORTED & CONNECTION_TIMEOUT

Number 3 is effectively tested like this:
if (CONNECTION_ABORTED & CONNECTION_TIMEOUT)
    echo 'Connection both aborted and timed out';

down

Anonymous ¶

17 years ago


in regards of posting from:
arr1 at hotmail dot co dot uk

if you use/write sessions you need to do this before:
(otherwise it does not work)

session_write_close();

and if wanted:

ignore_user_abort(TRUE);
instead of ignore_user_abort();

down

Ilya Penyaev ¶

12 years ago


I was quite stuck when trying to make my script redirect the client to another URL and then continue processing. The reason was php-fpm. All possible buffer flushes did not work, unless I called fastcgi_finish_request();

For example:

<?php
    // redirecting...
    ignore_user_abort(true);
    header("Location: ".$redirectUrl, true);
    header("Connection: close", true);
    header("Content-Length: 0", true);
    ob_end_flush();
    flush();
    fastcgi_finish_request(); // important when using php-fpm!
    
    sleep (5); // User won't feel this sleep because he'll already be away
    
    // do some work after user has been redirected
?>

down

pulstar at mail dot com ¶

21 years ago


These functions are very useful for example if you need to control when a visitor in your website place an order and you need to check if he/she didn't clicked the submit button twice or cancelled the submit just after have clicked the submit button. 
If your visitor click the stop button just after have submitted it, your script may stop in the middle of the process of registering the products and do not finish the list, generating inconsistency in your database.
With the ignore_user_abort() function you can make your script finish everything fine and after you can check with register_shutdown_function() and connection_aborted() if the visitor cancelled the submission or lost his/her connection. If he/she did, you can set the order as not confirmed and when the visitor came back, you can present the old order again.
To prevent a double click of the submit button, you can disable it with javascript or in your script you can set a flag for that order, which will be recorded into the database. Before accept a new submission, the script will check if the same order was not placed before and reject it. This will work fine, as the script have finished the job before.
Note that if you use ob_start("callback_function") in the begin of your script, you can specify a callback function that will act like the shutdown function when our script ends and also will let you to work on the generated page before send it to the visitor.

down

Anonymous ¶

12 years ago


This simple function outputs a string and closes the connection. It considers compression using "ob_gzhandler"



It took me a little while to put this all together, mostly because setting the encoding to none, as some people noted here, didn't work.



<?php

function outputStringAndCloseConnection2($stringToOutput)

{    

    set_time_limit(0);

    ignore_user_abort(true);    

    // buffer all upcoming output - make sure we care about compression:

    if(!ob_start("ob_gzhandler"))

        ob_start();         

    echo $stringToOutput;    

    // get the size of the output

    $size = ob_get_length();    

    // send headers to tell the browser to close the connection    

    header("Content-Length: $size");

    header('Connection: close');    

    // flush all output

    ob_end_flush();

    ob_flush();

    flush();    

    // close current session

    if (session_id()) session_write_close();

}

?>

down

Jean Charles MAMMANA ¶

16 years ago


connection_status() return ABORTED state ONLY if the client disconnects gracefully (with STOP button). In this case the browser send the RST TCP packet that notify PHP the connection is closed.
But.... If the connection is stopped by networs troubles (wifi link down by exemple) the script doesn't know that the client is disconnected :(

I've tried to use fopen("php://output") with stream_select() on writting to detect write locks (due to full buffer) but php give me this error : "cannot represent a stream of type Output as a select()able descriptor"

So I don't know how to detect correctly network trouble connection...

down

-43

robert at go dot rw ¶

8 years ago


01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
/*
 * Anti-Pattern
 */
 
# Connect
mysql_connect('localhost', 'username', 'password') or die('Could not connect: ' . mysql_error());
 
# Choose a database
mysql_select_db('someDatabase') or die('Could not select database');
 
# Perform database query
$query = "SELECT * from someTable";
$result = mysql_query($query) or die('Query failed: ' . mysql_error());
 
# Filter through rows and echo desired information
while ($row = mysql_fetch_object($result)) {
    echo $row->name;
}

add a note