debug_backtrace

(PHP 4 >= 4.3.0, PHP 5, PHP 7, PHP 8)

debug_backtraceGénère le contexte de débogage

Description

debug_backtrace(int $options = DEBUG_BACKTRACE_PROVIDE_OBJECT, int $limit = 0): array

debug_backtrace() génère un contexte de débogage PHP.

Liste de paramètres

options

Ce paramètre est un masque d'options suivantes :

Options pour la fonction debug_backtrace()
DEBUG_BACKTRACE_PROVIDE_OBJECT Si l'on doit ou non peupler l'index "object".
DEBUG_BACKTRACE_IGNORE_ARGS Si l'on doit ou non omettre l'index "args" et donc tous les arguments de la fonction/méthode pour économiser de la mémoire.

Note:

Il existe quatre combinaisons possibles :

Options de debug_backtrace()
debug_backtrace() Alimente les deux index
debug_backtrace(DEBUG_BACKTRACE_PROVIDE_OBJECT)
debug_backtrace(1)
debug_backtrace(0) Omet l'index "object" et remplit l'index "args".
debug_backtrace(DEBUG_BACKTRACE_IGNORE_ARGS) Omet l'index "object" et l'index "args".
debug_backtrace(2)
debug_backtrace(DEBUG_BACKTRACE_PROVIDE_OBJECT|DEBUG_BACKTRACE_IGNORE_ARGS) Remplit l'index "object" et omet l'index "args".
debug_backtrace(3)

limit

Ce paramètre peut être utilisé pour limiter le nombre de trames dans la pile retournée. Par défaut (limit=0), la fonction retourne toutes les trames de la pile.

Valeurs de retour

Retourne un tableau de tableaux associatifs. Les éléments de retour possibles sont les suivants :

Éléments possibles de retour de la fonction debug_backtrace()
Nom Type Description
function chaîne de caractères Le nom de la fonction courante. Voir aussi __FUNCTION__.
line entier Le numéro de la ligne courante. Voir aussi __LINE__.
file chaîne de caractères Le nom du fichier courant. Voir aussi __FILE__.
class chaîne de caractères Le nom de la classe courante. Voir aussi __CLASS__.
object objet L'objet courant.
type chaîne de caractères Le type de classe courante. Si une méthode est appelée, "->" est retourné. Si une méthode statique est appelée, "::" est retourné. Si une fonction est appelée, rien ne sera retourné.
args tableau Si à l'intérieur d'une fonction, ceci liste des arguments. Si dans un fichier inclus, ceci liste des fichiers inclus.

Exemples

Exemple #1 Exemple avec debug_backtrace()

<?php
// filename: /tmp/a.php

function a_test($str)
{
echo
"\nHi: $str";
var_dump(debug_backtrace());
}

a_test('friend');
?>

<?php
// filename: /tmp/b.php
include_once '/tmp/a.php';
?>

Résultat de l'exécution de /tmp/b.php :

Hi: friend
array(2) {
  [0]=>
    array(4) {
      ["file"] => string(10) "/tmp/a.php"
      ["line"] => int(10)
      ["function"] => string(6) "a_test"
      ["args"]=>
        array(1) {
          [0] => &string(6) "friend"
        }
    }
  [1]=>
    array(4) {
      ["file"] => string(10) "/tmp/b.php"
      ["line"] => int(2)
      ["args"] =>
        array(1) {
          [0] => string(10) "/tmp/a.php"
        }
      ["function"] => string(12) "include_once"
    }
}

Voir aussi

add a note add a note

User Contributed Notes 37 notes

up
108
jurchiks101 at gmail dot com
11 years ago
Here's a function I just wrote for getting a nice and comprehensible call trace. It is probably more resource-intensive than some other alternatives but it is short, understandable, and gives nice output (Exception->getTraceAsString()).

<?php
function generateCallTrace()
{
   
$e = new Exception();
   
$trace = explode("\n", $e->getTraceAsString());
   
// reverse array to make steps line up chronologically
   
$trace = array_reverse($trace);
   
array_shift($trace); // remove {main}
   
array_pop($trace); // remove call to this method
   
$length = count($trace);
   
$result = array();
   
    for (
$i = 0; $i < $length; $i++)
    {
       
$result[] = ($i + 1)  . ')' . substr($trace[$i], strpos($trace[$i], ' ')); // replace '#someNum' with '$i)', set the right ordering
   
}
   
    return
"\t" . implode("\n\t", $result);
}
?>

Example output:
    1) /var/www/test/test.php(15): SomeClass->__construct()
    2) /var/www/test/SomeClass.class.php(36): SomeClass->callSomething()
up
13
robert at medianis dot net
8 years ago
Just a short note on debug_backtrace options for PHP 5.3.6 or newer:

debug_backtrace() - show all options
debug_backtrace(0) - exlude ["object"]
debug_backtrace(1) - same as debug_backtrace()
debug_backtrace(2) - exlude ["object"] AND ["args"]

use this example and try calling debug_backtrace with different options

<?php
function F1()
{
    echo
"<br />";
    echo
"in F1 now";
    echo
"<pre>".print_r(debug_backtrace(2),true)."</pre>";
}

class
DebugOptionsTest
{
    function
F2()
    {
        echo
"<br />";
        echo
"in F2 now";
       
F1();
    }

}

echo
"<hr />calling F1";
F1();

$c=new DebugOptionsTest();
echo
"<hr /><hr /><hr />calling F2";
$c->F2("testValue");

?>
up
10
jsnell at e-normous dot com
17 years ago
If you are using the backtrace function in an error handler, avoid using var_export() on the args, as you will cause fatal errors in some situations, preventing you from seeing your stack trace.  Some structures will cause PHP to generate the fatal error "Nesting level too deep - recursive dependency?" This is a design feature of php, not a bug (see http://bugs.php.net/bug.php?id=30471)
up
2
jake at qzdesign dot co dot uk
5 years ago
The `args` element contains only the arguments actually passed to the function or method.  It does not include default parameters if they were not explicitly specified.  (A least, this is the case with PHP 7.1.9.)  This is consistent with the behaviour of `func_get_args()`.
up
2
michael dot schramm at gmail dot com
15 years ago
Be carefull if you are using objects as arguments for function calls!

<?php
error_reporting
(E_ALL);

function
myPrint($trace){
    foreach(
$trace as $i=>$call){
       
/**
         * THIS IS NEEDED! If all your objects have a __toString function it's not needed!
         *
         * Catchable fatal error: Object of class B could not be converted to string
         * Catchable fatal error: Object of class A could not be converted to string
         * Catchable fatal error: Object of class B could not be converted to string
         */
       
if (is_object($call['object'])) { $call['object'] = 'CONVERTED OBJECT OF CLASS '.get_class($call['object']); }
        if (
is_array($call['args'])) {
            foreach (
$call['args'] AS &$arg) {
                if (
is_object($arg)) { $arg = 'CONVERTED OBJECT OF CLASS '.get_class($arg); }
            }
        }
       
       
$trace_text[$i] = "#".$i." ".$call['file'].'('.$call['line'].') ';
       
$trace_text[$i].= (!empty($call['object'])?$call['object'].$call['type']:'');
       
$trace_text[$i].= $call['function'].'('.implode(', ',$call['args']).')';
    }
   
   
var_dump($trace_text);
}

class
A{
    public function
test($obj){
       
$obj->test();
    }
}

class
B{
    public function
test(){
        echo
myPrint(debug_backtrace());
    }
}

$A = new A();
$B = new B();

$A->test($B);

?>
up
2
http://synergy8.com
18 years ago
It should be noted that if an internal php function such as call_user_func in the backtrace, the 'file' and 'line' entries will not be set.

Most debug tracers will use these entries.  You should place a check to see if the key exists in the array before using this function.  Otherwise notices will be generated.

<?php

$arrTrace
= debug_backtrace();

foreach (
$arrTrace as $arr)
{
    if (!isset (
$arr['file']))
    {
       
$arr['file'] = '[PHP Kernel]';
    }

    if (!isset (
$arr['line']))
    {
       
$arr['line'] = '';
    }

   
// Do something
}

?>
up
6
Emmett Brosnan
8 years ago
Quick and dirty formatted output from debug_backtrace.

$file_paths = debug_backtrace();
 
foreach($file_paths AS $file_path) {
  foreach($file_path AS $key => $var) {
    if($key == 'args') {
      foreach($var AS $key_arg => $var_arg) {
        echo $key_arg . ': ' . $var_arg . '<br>';
      }
    } else {
      echo $key . ': ' . $var . '<br>';
    } 
  }
}
up
3
root at jackyyf dot com
11 years ago
When use register_shutdown_function, and the function called when shutting down, there are no line number nor filename information about this function, only function, class(if possible), type(if possible) and args are provided.
up
3
Bill Getas
13 years ago
Here's my little updated contribution - it prints colorful output in the way I prefer.  Define a helper function isRootIp() that contains an array including your IP; then calls to bt() simply return, so you can sprinkle backtraces in live sites w/o anyone knowing.

<?php
function bt()
{
    if( !
isRootIp() )
    {
        return
false;
    }
   
array_walk( debug_backtrace(), create_function( '$a,$b', 'print "<br /><b>". basename( $a[\'file\'] ). "</b> &nbsp; <font color=\"red\">{$a[\'line\']}</font> &nbsp; <font color=\"green\">{$a[\'function\']} ()</font> &nbsp; -- ". dirname( $a[\'file\'] ). "/";' ) );
}
?>
up
6
Anonymous
11 years ago
Simple function to get a string in form "filename: [class->][function(): ]"

<?php
function get_caller_info() {
   
$c = '';
   
$file = '';
   
$func = '';
   
$class = '';
   
$trace = debug_backtrace();
    if (isset(
$trace[2])) {
       
$file = $trace[1]['file'];
       
$func = $trace[2]['function'];
        if ((
substr($func, 0, 7) == 'include') || (substr($func, 0, 7) == 'require')) {
           
$func = '';
        }
    } else if (isset(
$trace[1])) {
       
$file = $trace[1]['file'];
       
$func = '';
    }
    if (isset(
$trace[3]['class'])) {
       
$class = $trace[3]['class'];
       
$func = $trace[3]['function'];
       
$file = $trace[2]['file'];
    } else if (isset(
$trace[2]['class'])) {
       
$class = $trace[2]['class'];
       
$func = $trace[2]['function'];
       
$file = $trace[1]['file'];
    }
    if (
$file != '') $file = basename($file);
   
$c = $file . ": ";
   
$c .= ($class != '') ? ":" . $class . "->" : "";
   
$c .= ($func != '') ? $func . "(): " : "";
    return(
$c);
}
?>

Usage like:

<?php
function debug($str) {
    echo
get_caller_info() . $str . "<br>\n";
}
?>

get_caller_info() will return info about the function /class->method that called debug().
up
3
jcmargentina at gmail dot com
5 years ago
I want to point out that debug_backtrace() in new versions of php can detect recursion // circular references .. avoiding memory consumption.

Example:

<?php

class ParentClass {
        public function
__construct()
        {
               
$this->_child = new ChildClass($this);
               
var_dump(debug_backtrace());
        }
}

class
ChildClass {
        public function
__construct(ParentClass $p)
        {
               
$this->_parent = $p;
        }
}

$test = new ParentClass();
?>

Output:

array(1) {
  [0]=>
  array(7) {
    ["file"]=>
    string(23) "/home/jcm/testdebug.php"
    ["line"]=>
    int(18)
    ["function"]=>
    string(11) "__construct"
    ["class"]=>
    string(11) "ParentClass"
    ["object"]=>
    object(ParentClass)#1 (1) {
      ["_child"]=>
      object(ChildClass)#2 (1) {
        ["_parent"]=>
        *RECURSION*
      }
    }
    ["type"]=>
    string(2) "->"
    ["args"]=>
    array(0) {
    }
  }
}

Attention in the *RECURSION* hint provided
up
3
jonas at faceways dot se
11 years ago
When using debug_backtrace() to check if you're being accessed from another caller, please remember to ask debug_backtrace to only go as far as needed in depth and skip taking the entire debug object as return parameter:

<?php
   
if (count(debug_backtrace(FALSE, 1)) == 0)
    {
       
// Do something
   
}
?>
up
2
anoam at yandex dot ru
10 years ago
It works a little bit different with resources in different PHP versions.

For example:
function foo($bar)
{
  return debug_backtrace();
}

$resource = fopen(__FILE__, 'r');
$backtrace = foo($resource);
echo "when resource is opened: " . gettype($backtrace[0]['args'][0]) . "\n";
fclose($resource);
echo "when resource is closed: " . gettype($backtrace[0]['args'][0]) . "\n";

With 5.3.10 I got:
when resource is opened: resource
when resource is closed: resource

With 5.5.9:
when resource is opened: resource
when resource is closed: unknown type

Be carefull.
up
2
jlammertink at gmail dot com
14 years ago
I use this simple but effective function so i can see which method in the child class called the current method (in the parent class).

<?php
function get_caller_method()
{
   
$traces = debug_backtrace();

    if (isset(
$traces[2]))
    {
        return
$traces[2]['function'];
    }

    return
null;
}
?>
up
5
d at rren dot me
12 years ago
Howdy guys, just a note really - The ['args'] data within the resulting array is supplied by reference. I found myself editing the reference unknowingly which in turn shows its ugly head further down the line if you call multiple backtrace.

<?php
$trace
= array_reverse(debug_backtrace());

// LOOP BACKTRACE
$la = 0;
$lb = count($trace);
while (
$la<$lb){

   
// DATA FROM BACKTRACE
   
$trace[$la]['file'];
   
$trace[$la]['line'];
   
$trace[$la]['args'];
   
$trace[$la]['function'];
   
// DATA FROM BACKTRACE

    // LOOP ARGUMENTS ARRAY
   
$ba = 0;
   
$bb = count($trace[$la]['args']);
    while (
$ba<$bb){

       
$trace[$la]['args'][$ba] = "EDITING A REFERENCE/POINTER";

       
$ba++;
    }
    unset(
$bb);
    unset(
$ba);
   
// LOOP ARGUMENTS ARRAY

   
$la++;
}
unset(
$lb);
unset(
$la);
// LOOP BACKTRACE
?>
up
8
kenorb at gmail dot com
14 years ago
One line of code to print simplest and shortest human readable backtrace:)
<?php
array_walk
(debug_backtrace(),create_function('$a,$b','print "{$a[\'function\']}()(".basename($a[\'file\']).":{$a[\'line\']}); ";'));
?>
up
1
kroczu AT interia DOT pl
17 years ago
<?
// useful and comfortable debug function
// it's show memory usage and time flow between calls, so we can quickly find a block of code that need optimisation...
// example result:
/*
debug example.php> initialize
debug example.php> code-lines: 39-41 time: 2.0002 mem: 19 KB
debug example.php> code-lines: 41-44 time: 0.0000 mem: 19 KB
debug example.php> code-lines: 44-51 time: 0.6343 mem: 9117 KB
debug example.php> code-lines: 51-53 time: 0.1003 mem: 9117 KB
debug example.php> code-lines: 53-55 time: 0.0595 mem: 49 KB
*/

function debug()
{
   static
$start_time = NULL;
   static
$start_code_line = 0;

  
$call_info = array_shift( debug_backtrace() );
  
$code_line = $call_info['line'];
  
$file = array_pop( explode('/', $call_info['file']));

   if(
$start_time === NULL )
   {
       print
"debug ".$file."> initialize\n";
      
$start_time = time() + microtime();
      
$start_code_line = $code_line;
       return
0;
   }

  
printf("debug %s> code-lines: %d-%d time: %.4f mem: %d KB\n", $file, $start_code_line, $code_line, (time() + microtime() - $start_time), ceil( memory_get_usage()/1024));
  
$start_time = time() + microtime();
  
$start_code_line = $code_line;
}

////////////////////////////////////////////////
// example:

debug();
sleep(2);
debug();
// soft-code...
$a = 3 + 5;
debug();

// hard-code
for( $i=0; $i<100000; $i++)
{
   
$dummy['alamakota'.$i] = 'alamakota'.$i;
}
debug();
usleep(100000);
debug();
unset(
$dummy);
debug();

?>
up
1
admin at sgssweb dot com
18 years ago
Surprizingly, debug_backtrace() cannot aquire arguments from the function that is used as the second or later argument of a function.

<?php

function a($p) {
   
$backtrace = debug_backtrace();
   
    if (isset(
$backtrace[0]['args']))
       
var_export($backtrace[0]['args']);
    else
        echo
"Cannot aquire arguments";
    echo
"<br />";
   
    return
$p;
}

function
b($p1, $p2, $p3) {
    echo
"$p1, $p2, $p3";
}

// This outputs:
//    array ( 0 => 'First a', )
//    Cannot aquire arguments
//    Cannot aquire arguments
//    First a, Second a, Third a
b(a("First a"), a("Second a"), a("Third a"));

?>
up
2
Anonymous
11 years ago
A usual entry looks like this:
<?php
array(6) {
 
'file' =>
 
string(87) "DbSelector.php"
  'line'
=>
 
int(171)
 
'function' =>
 
string(5) "error"
  'class'
=>
 
string(42) "LoggingService"
  'type'
=>
 
string(2) "::"
  'args'
=>
  array(
1) {
    [
0] =>
   
string(27) "Connecting to DB: unittests"
 
}
}
?>

Be warned though that 'file' and 'class' do not reference the same thing!
'file' means which file calls the next step.
'class' is the next step being called.

So 'file' is the caller, 'class' is the callee.
up
1
nyoung55 at that_google_mail.com
11 years ago
Here is a function to cleanly output the debug_backtrace to the error_log

<?php
/*
* Send the output from a backtrace to the error_log
* @param string $message Optional message that will be sent the the error_log before the backtrace
*/
function log_trace($message = '') {
   
$trace = debug_backtrace();
    if (
$message) {
       
error_log($message);
    }
   
$caller = array_shift($trace);
   
$function_name = $caller['function'];
   
error_log(sprintf('%s: Called from %s:%s', $function_name, $caller['file'], $caller['line']));
    foreach (
$trace as $entry_id => $entry) {
       
$entry['file'] = $entry['file'] ? : '-';
       
$entry['line'] = $entry['line'] ? : '-';
        if (empty(
$entry['class'])) {
           
error_log(sprintf('%s %3s. %s() %s:%s', $function_name, $entry_id + 1, $entry['function'], $entry['file'], $entry['line']));
        } else {
           
error_log(sprintf('%s %3s. %s->%s() %s:%s', $function_name, $entry_id + 1, $entry['class'], $entry['function'], $entry['file'], $entry['line']));
        }
    }
}
?>
up
1
Gemorroj
11 years ago
Another variation formatting backtrace.
Parameter $ignore to ignore the extra calls.
<?php
/**
* Getting backtrace
*
* @param int $ignore ignore calls
*
* @return string
*/
protected function getBacktrace($ignore = 2)
{
   
$trace = '';
    foreach (
debug_backtrace() as $k => $v) {
        if (
$k < $ignore) {
            continue;
        }

       
array_walk($v['args'], function (&$item, $key) {
           
$item = var_export($item, true);
        });

       
$trace .= '#' . ($k - $ignore) . ' ' . $v['file'] . '(' . $v['line'] . '): ' . (isset($v['class']) ? $v['class'] . '->' : '') . $v['function'] . '(' . implode(', ', $v['args']) . ')' . "\n";
    }

    return
$trace;
}
?>
up
2
liam at N0SPAM dot boxclever dot ca
1 year ago
Options provided by bitmask parameters can be disabled using !

<?php
debug_backtrace
( !DEBUG_BACKTRACE_PROVIDE_OBJECT | DEBUG_BACKTRACE_IGNORE_ARGS);
?>
up
1
kexianbin at diyism dot com
12 years ago
need no Xdebug or dbg.so on server, return more detailed message:

diyism_trace.php:
<?php
define
(TRACES_MODE, 'TEXTAREA');//'TEXTAREA' or 'FIREPHP'
$GLOBALS['traces.pre']=array();
function
my_array_diff($arr1, $arr2)
         {foreach (
$arr1 as $k=>$v)
                  {if (
in_array($v, $arr2, true))
                      {unset(
$arr1[$k]);
                      }
                  }
          return
$arr1;
         }
function
my_var_export($var, $is_str=false)
         {
$rtn=preg_replace(array('/Array\s+\(/', '/\[(\d+)\] => (.*)\n/', '/\[([^\d].*)\] => (.*)\n/'), array('array (', '\1 => \'\2\''."\n", '\'\1\' => \'\2\''."\n"), substr(print_r($var, true), 0, -1));
         
$rtn=strtr($rtn, array("=> 'array ('"=>'=> array ('));
         
$rtn=strtr($rtn, array(")\n\n"=>")\n"));
         
$rtn=strtr($rtn, array("'\n"=>"',\n", ")\n"=>"),\n"));
         
$rtn=preg_replace(array('/\n +/e'), array('strtr(\'\0\', array(\'    \'=>\'  \'))'), $rtn);
         
$rtn=strtr($rtn, array(" Object',"=>" Object'<-"));
          if (
$is_str)
             {return
$rtn;
             }
          else
              {echo
$rtn;
              }
         }
function
tick_handler()
         {
$tmp=debug_backtrace();
         
$trace=my_array_diff($tmp, $GLOBALS['traces.pre']);
         
//echo '<pre>';var_export($trace);echo '</pre>';echo '<br/>'; //for debug diyism_trace.php
         
$trace=array_values($trace);
         
$GLOBALS['traces.pre']=$tmp;
          if (
count($trace)>0 && $trace[0]['file'].'/'.@$tmp[1]['function']!==@$GLOBALS['traces'][count($GLOBALS['traces'])-1]['key']) //filter empty array and rearrange array_values(), because some lines will trigger two tick events per line, for example: 1.last line is "some code;questmark>" 2.error_reporting(...
            
{for ($i=count($trace)-1; $i>=0; --$i)
                  {
$GLOBALS['traces'][]=$tmp_fb=array_merge(array('key'=>$trace[$i]['file'].'/'.@$tmp[$i+1]['function']), $trace[$i], array('function'=>strtr($trace[$i]['function'], array('tick_handler'=>'CONTINUE')), 'in_function'=>@$tmp[$i+1]['function']));
                  
TRACES_MODE==='FIREPHP'?fb(trace_output($tmp_fb), 'diyism_trace:'.++$GLOBALS['diyism_trace_no']):'';
                  }
             }
         }
function
trace_output($trace)
         {
$trace['in_function']=strtr(@$trace['in_function'], array('require'=>'', 'require_once'=>'', 'include'=>'', 'include_once'=>''));
         
$trace['args']=$trace['args']?strtr(preg_replace(array('/\n +/'), array(''), preg_replace(array('/\n  \d+ => /'), array(''), substr(my_var_export($trace['args'], true), 7, -3))), array("\r"=>'\r', "\n"=>'\n')):'';
          return
$trace['file'].($trace['in_function']?'/'.$trace['in_function'].'()':'').'/'.$trace['line'].': '.$trace['function'].'('.$trace['args'].')';
         }
function
traces_output()
         {echo
'<textarea style="width:100%;height:300px;">';
         
$GLOBALS['traces']=array_slice($GLOBALS['traces'], 2);//remove registering tick line and requiring 'diyism_trace.php' line
         
foreach ($GLOBALS['traces'] as $k=>$trace)
                  {echo
htmlentities($k.':'.trace_output($trace)."\n");
                  }
          echo
'</textarea>';
         }
register_tick_function('tick_handler');
TRACES_MODE==='TEXTAREA'?register_shutdown_function('traces_output'):'';
?>

test.php:
<?php
declare(ticks=1);
require
'diyism_trace.php';

a('a', array('hello'));
1+2;
b();
function
a()
         {
$d=1;
         
b();
         
$d=2;
         }
function
b()
         {
1+1;
         }
?>
up
2
php noob
14 years ago
Surprisingly, no one has described one of the best uses of this: dumping a variable and showing the location. When debugging, especially a big and unfamiliar system, it's a pain remembering where I added those var dumps. Also, this way there is a separator between multiple dump calls.

<?php

function dump( $var ) {
   
$result = var_export( $var, true );
   
$loc = whereCalled();
    return
"\n<pre>Dump: $loc\n$result</pre>";
}

function
whereCalled( $level = 1 ) {
   
$trace = debug_backtrace();
   
$file   = $trace[$level]['file'];
   
$line   = $trace[$level]['line'];
   
$object = $trace[$level]['object'];
    if (
is_object($object)) { $object = get_class($object); }

    return
"Where called: line $line of $object \n(in $file)";
}
?>

In addition, calling 'whereCalled()' from any function will quickly identify locations that are doing something unexpected (e.g., updating a property at the wrong time). I'm new to PHP, but have used the equivalent in Perl for years.
up
2
php at kennel17 dot co dot uk
17 years ago
Further to my previous note, the 'object' element of the array can be used to get the parent object.  So changing the get_class_static() function to the following will make the code behave as expected:

<?php
   
function get_class_static() {
       
$bt = debug_backtrace();
   
        if (isset(
$bt[1]['object']))
            return
get_class($bt[1]['object']);
        else
            return
$bt[1]['class'];
    }
?>

HOWEVER, it still fails when being called statically.  Changing the last two lines of my previous example to

<?php
  foo
::printClassName();
 
bar::printClassName();
?>

...still gives the same problematic result in PHP5, but in this case the 'object' property is not set, so that technique is unavailable.
up
0
henzeberkheij at gmail dot com
14 years ago
I find it useful to know if a function is being called. in Java for instance you usually print a line with the functionname and arguments in the beginning of the function. I wanted to achieve the same thing in php thus i wrote the following class:

<?php
class Debug
{
    private static
$calls;

    public static function
log($message = null)
    {
        if(!
is_array(self::$calls))
           
self::$calls = array();

       
$call = debug_backtrace(false);
       
$call = (isset($call[1]))?$call[1]:$call[0];

       
$call['message'] = $message;
       
array_push(self::$calls, $call);
    }
}
?>

include this class before anything else
usage: Debug::log($message); at the beginning of your function.

write yourself a nice printout of the data;
up
0
john dot risken at gmail dot com
14 years ago
Everybody seems to have their favorite use.  I substitute this function for die().  It gives a message
to the user and emails me a PrettyPrint of what went wrong.  $info is set by me,
and it does a special check in the database object.

<?php
// var_format

function var_format($v) // pretty-print var_export
{
    return (
str_replace(array("\n"," ","array"),
array(
"<br>","&nbsp;","&nbsp;<i>array</i>"),
var_export($v,true))."<br>");
}
function
myDie($info)
{
   
$mysqlerr=strpos($info,"ERROR=You have an error in your SQL syntax");
    if(
$mysqlerr>0)$info=substr($info,0,$mysqlerr)." mySql format error";
   
$out="<br>MSG='$info'<br>".var_format($_REQUEST)."<br>";
   
$bt=debug_backtrace();
   
$sp=0;
   
$trace="";
    foreach(
$bt as $k=>$v)
    {
       
extract($v);
       
$file=substr($file,1+strrpos($file,"/"));
        if(
$file=="db.php")continue; // the db object
       
$trace.=str_repeat("&nbsp;",++$sp); //spaces(++$sp);
       
$trace.="file=$file, line=$line, function=$function<br>";       
    }
   
$out.="<br>".backTrace();
    if(
substr($info,0,4)=="XXX ") // special errrors when db is inaccessible
   
{
       
$out=str_replace("<br>","\n",$out);
       
$out=str_replace("&nbsp;"," ",$out);
       
mail("me@example.com","Database Execution Error for user ".$REMOTE_ADDR,"$out");
        exit(
"Database Access Error. Please try again later.");
    }
   
mail("me@example.com",'Error Monitor','Execution Error',$out);
    exit(
"DANG! An execution error in the program has been sent to the webmaster.
If you don't get an email from him soon, please call him."
);
}
?>

This produces an output like this

file=badmode.php, line=5, function=backTrace
  file=login.php, line=209, function=require
   file=midScreen.php, line=264, function=require
    file=masterindex.php, line=161, function=require
     file=production2.php, line=121, function=require
      file=index.php, line=16, function=require
up
2
bernyregeling AT hotmail DOT com
21 years ago
I wrote this function, in addition to jlim, for a nice NO-HTML output.

Thee result has similarities to a Java-error. Hope you like it.

(BTW, this function exits the script too, if debug_backtrace is displayed)
------------------------------
    function debug_bt()
    {
        if(!function_exists('debug_backtrace'))
        {
            echo 'function debug_backtrace does not exists'."\r\n";
            return;
        }
        //echo '<pre>';
        echo "\r\n".'----------------'."\r\n";
        echo 'Debug backtrace:'."\r\n";
        echo '----------------'."\r\n";
        foreach(debug_backtrace() as $t)
        {
            echo "\t" . '@ ';
            if(isset($t['file'])) echo basename($t['file']) . ':' . $t['line'];
            else
            {
                // if file was not set, I assumed the functioncall
                // was from PHP compiled source (ie XML-callbacks).
                echo '<PHP inner-code>';
            }

            echo ' -- ';

            if(isset($t['class'])) echo $t['class'] . $t['type'];

            echo $t['function'];

            if(isset($t['args']) && sizeof($t['args']) > 0) echo '(...)';
            else echo '()';

            echo "\r\n";
        }
        //echo '</pre>';
        exit;
         }
up
0
frank at frank dot com
16 years ago
Here is my simple example:
Code printing variable of class which instatiates the printing class.

Well, I am sure you understand when looking at the code:
Print result is: jippii

<?php
class A {

        function
something() {
               
$s = debug_backtrace();
               
               
$callingObject = $s[1]['object'];
               
$test = $callingObject->jip;
                print
$test;
        }

}

class
B {
      var
$jip;
     
        function
execute() {
               
$a = new A();
               
$this->jip = "jippii"
               
$a->something();
        }

}
$control = new B();
$control->execute();
?>
up
0
samthor
16 years ago
Here's a way to get the arguments for an upstream function in your stack (works with class methods, static methods and non-class methods):
<?php
/**
* getArgs - find arguments of upstream method
* can be called with, e.g. "funcname", "class::staticmethod", "class->instancemethod".
*/
function getArgs( $target, $subclass_ok = true ) {

    if(
strpos( $target, "::" ) ) {
        list(
$class, $target ) = explode( "::", $target, 2 );
       
$type = "::";
    }
    else if(
strpos( $target, "->" ) ) {
        list(
$class, $target ) = explode( "->", $target, 2 );
       
$type = "->";
    }
    else {
       
$type = NULL;
       
$class = NULL;
    }
   
$class and $class = new ReflectionClass( $class );

    foreach(
debug_backtrace() as $obj ) {

        if(
$obj['function'] == $target ) {
            if(
$type and $obj['type'] == $type ) {
               
$_cl = new ReflectionClass( $obj['class'] );
                if(
$_cl->getName() == $class->getName() or ( $subclass_ok and $_cl->isSubclassOf( $class ) ) ) {
                    return
$obj['args'];
                }
                unset(
$_cl );
            }
            else if( !
$type ) {
                return
$obj['args'];
            }
        }

    }

    return
NULL;

}
?>

Some example usage:
<?php
class Foo {
    function
test() {
       
$args = getArgs( "Foo->base" );
        print(
"the parameter 'v' to my call of base was: {$args[0]}\n" );
    }
    function
base( $v ) {
       
$this->test();
    }
}

$f = new Foo();
$f->base( 713 ); // will print.. ".. my call of base was: 713"

?>

Trust me, there are some reasons for why you might want to do this :)
up
0
seaside dot ki at mac dot com
17 years ago
I've started creating an external debug server for PHP. A PHP app require_once's a TADebugger(), which communicates with the debug sever. Find the OS X universal binary here [PHP source sample included]:

   http://www.turingart.com/downloads/phpDebugger.zip

Currently, TADebugger allows to post these properties back to the debug server:

- Call backtraces
- String messages
- Source files, which were referenced by a backtrace call

Note, that the binary is a early version.
up
0
icefragment at gmail dot com
18 years ago
A simple python-like backtrace. Note that I don't recurse into arrays if they are passed as arguments to functions.

function backtrace()
{
    $bt = debug_backtrace();
   
    echo("<br /><br />Backtrace (most recent call last):<br /><br />\n");   
    for($i = 0; $i <= count($bt) - 1; $i++)
    {
        if(!isset($bt[$i]["file"]))
            echo("[PHP core called function]<br />");
        else
            echo("File: ".$bt[$i]["file"]."<br />");
       
        if(isset($bt[$i]["line"]))
            echo("&nbsp;&nbsp;&nbsp;&nbsp;line ".$bt[$i]["line"]."<br />");
        echo("&nbsp;&nbsp;&nbsp;&nbsp;function called: ".$bt[$i]["function"]);
       
        if($bt[$i]["args"])
        {
            echo("<br />&nbsp;&nbsp;&nbsp;&nbsp;args: ");
            for($j = 0; $j <= count($bt[$i]["args"]) - 1; $j++)
            {
                if(is_array($bt[$i]["args"][$j]))
                {
                    print_r($bt[$i]["args"][$j]);
                }
                else
                    echo($bt[$i]["args"][$j]);   
                           
                if($j != count($bt[$i]["args"]) - 1)
                    echo(", ");
            }
        }
        echo("<br /><br />");
    }
}
up
0
zmorris at mac dot com
18 years ago
Hi, I got tired of using a trace( $message, __FILE__, __LINE__ ) function I made.  It forced me to include the file and line params (since php doesn't have macros) so I decided to make an alternative.

Simply call this new version using trace( 'my message' ); and it prints out a stack trace in a clearer way than the one stored in the debug_backtrace() array.  It handles traces from outside of functions, traces in nested functions, and traces in included files, and also displays the function in a way that can be pasted right back into your php code for faster testing!

NOTE - be sure to save your files with the correct line endings for the line numbers to work correctly, which for Mac OS X is unix.  You can get to this option in the popup menu in the toolbar at the top of each window in BBEdit.

<?php

function    print_var( $var )
{
   if(
is_string( $var ) )
       return(
'"'.str_replace( array("\x00", "\x0a", "\x0d", "\x1a", "\x09"), array('\0', '\n', '\r', '\Z', '\t'), $var ).'"' );
   else if(
is_bool( $var ) )
   {
       if(
$var )
           return(
'true' );
       else
           return(
'false' );
   }
   else if(
is_array( $var ) )
   {
      
$result = 'array( ';
      
$comma = '';
       foreach(
$var as $key => $val )
       {
          
$result .= $comma.print_var( $key ).' => '.print_var( $val );
          
$comma = ', ';
       }
      
$result .= ' )';
       return(
$result );
   }
  
   return(
var_export( $var, true ) );    // anything else, just let php try to print it
}

function   
trace( $msg )
{
   echo
"<pre>\n";
  
  
//var_export( debug_backtrace() ); echo "</pre>\n"; return;    // this line shows what is going on underneath
  
  
$trace = array_reverse( debug_backtrace() );
  
$indent = '';
  
$func = '';
  
   echo
$msg."\n";
  
   foreach(
$trace as $val)
   {
       echo
$indent.$val['file'].' on line '.$val['line'];
      
       if(
$func ) echo ' in function '.$func;
      
       if(
$val['function'] == 'include' ||
          
$val['function'] == 'require' ||
          
$val['function'] == 'include_once' ||
          
$val['function'] == 'require_once' )
          
$func = '';
       else
       {
          
$func = $val['function'].'(';
          
           if( isset(
$val['args'][0] ) )
           {
              
$func .= ' ';
              
$comma = '';
               foreach(
$val['args'] as $val )
               {
                  
$func .= $comma.print_var( $val );
                  
$comma = ', ';
               }
              
$func .= ' ';
           }
          
          
$func .= ')';
       }
      
       echo
"\n";
      
      
$indent .= "\t";
   }
  
   echo
"</pre>\n";
}

trace( 'error outside function' );

function   
test( $param1, $param2, $param3, $param4 )
{
  
trace( 'error in test()' );
}

test( 1.1, "param2\n", array( 1 => "a\n", "b\n" => 2 ), false );

?>
up
1
jlim#natsoft.com.my
21 years ago
Pretty print the backtrace(). Functions are indented based on call value, and file is linked using file:// for convenience.

Enjoy, John Lim

    function adodb_backtrace($print=true)
    {
        $s = '';
        if (PHPVERSION() >= 4.3) {
       
            $MAXSTRLEN = 64;
       
            $s = '<pre align=left>';
            $traceArr = debug_backtrace();
            array_shift($traceArr);
            $tabs = sizeof($traceArr)-1;
            foreach ($traceArr as $arr) {
                for ($i=0; $i < $tabs; $i++) $s .= ' &nbsp; ';
                $tabs -= 1;
                $s .= '<font face="Courier New,Courier">';
                if (isset($arr['class'])) $s .= $arr['class'].'.';
                foreach($arr['args'] as $v) {
                    if (is_null($v)) $args[] = 'null';
                    else if (is_array($v)) $args[] = 'Array['.sizeof($v).']';
                    else if (is_object($v)) $args[] = 'Object:'.get_class($v);
                    else if (is_bool($v)) $args[] = $v ? 'true' : 'false';
                    else {
                        $v = (string) @$v;
                        $str = htmlspecialchars(substr($v,0,$MAXSTRLEN));
                        if (strlen($v) > $MAXSTRLEN) $str .= '...';
                        $args[] = $str;
                    }
                }
               
                $s .= $arr['function'].'('.implode(', ',$args).')';
                $s .= sprintf("</font><font color=#808080 size=-1> # line %4d,".
  " file: <a href=\"file:/%s\">%s</a></font>",
  $arr['line'],$arr['file'],$arr['file']);
                $s .= "\n";
            }   
            $s .= '</pre>';
            if ($print) print $s;
        }
        return $s;
    }
up
0
spagmoid at yahoo dot NOSPAMcom
20 years ago
ATTN: jlim#natsoft.com.my

Great function, but you have a few bugs.

At the line:
foreach($arr['args'] as $v)

Change it to:
$args = array();
if(!empty($arr['args'])) foreach($arr['args'] as $v)

And since line & file are not present in the array if calling from the error handler,

$Line = (isset($arr['line'])? $arr['line'] : "unknown");
$File = (isset($arr['file'])? $arr['file'] : "unknown");

and substitute accordingly.

Here's my version of it, alas with different formatting:
----------------------------------------

function DBG_GetBacktrace()
{
    $s = '';
    $MAXSTRLEN = 64;
   
    $s = '<pre align=left>';
    $traceArr = debug_backtrace();
    array_shift($traceArr);
    $tabs = sizeof($traceArr)-1;
    foreach($traceArr as $arr)
    {
        for ($i=0; $i < $tabs; $i++) $s .= ' &nbsp; ';
        $tabs -= 1;
        $s .= '<font face="Courier New,Courier">';
        if (isset($arr['class'])) $s .= $arr['class'].'.';
        $args = array();
        if(!empty($arr['args'])) foreach($arr['args'] as $v)
        {
            if (is_null($v)) $args[] = 'null';
            else if (is_array($v)) $args[] = 'Array['.sizeof($v).']';
            else if (is_object($v)) $args[] = 'Object:'.get_class($v);
            else if (is_bool($v)) $args[] = $v ? 'true' : 'false';
            else
            {
                $v = (string) @$v;
                $str = htmlspecialchars(substr($v,0,$MAXSTRLEN));
                if (strlen($v) > $MAXSTRLEN) $str .= '...';
                $args[] = "\"".$str."\"";
            }
        }
        $s .= $arr['function'].'('.implode(', ',$args).')</font>';
        $Line = (isset($arr['line'])? $arr['line'] : "unknown");
        $File = (isset($arr['file'])? $arr['file'] : "unknown");
        $s .= sprintf("<font color=#808080 size=-1> # line %4d, file: <a href=\"file:/%s\">%s</a></font>",
            $Line, $File, $File);
        $s .= "\n";
    }   
    $s .= '</pre>';
    return $s;
}
up
-3
ciprian dot stingu at gmail dot com
12 years ago
A function that i use for debug
I shortened variables name and i eliminated the spaces from second function in order fit in post :(

<?php
define
("LFP", './lt.log');
function
LogTrace($Argument, $lfn = LFP, $itw = '  ')
{
   
error_log("=====\r", 3, $lfn);
   
error_log("[BEGIN BACKTRACE]\r", 3, $lfn);
   
$it = '';
   
$Ts = array_reverse(debug_backtrace());
    foreach(
$Ts as $T)
       { 
        if(
$T['function'] != 'include' && $T['function'] != 'require' && $T['function'] != 'include_once' && $T['function'] != 'require_once')
        {
           
$ft = $it . '<'. basename($T['file']) . '> on line ' . $T['line']; 
            if(
$T['function'] != 'LogTrace')
            {
                if(isset(
$T['class']))
                   
$ft .= ' in method ' . $T['class'] . $T['type'];
                else
                   
$ft .= ' in function ';
               
$ft .= $Trace['function'] . '(';
            }
            else
               
$ft .= '(';
            if(isset(
$T['args'][0]))
            {
                if(
$T['function'] != 'LogTrace')
                {
                   
$ct = '';
                    foreach(
$T['args'] as $A)
                    {
                       
$ft .= $ct . LogVar($A, '', $it, $itw, 0);
                       
$ct = $it . $itw . ',';
                    }
                }
                else
                   
$ft .= LogVar($T['args'][0], '', $it, $itw, 0);
            }
           
$ft .= $it . ")\r";
           
error_log($ft, 3, $lfn);
           
$it .= $itw;
        }           
    }
   
error_log("[END BACKTRACE]\r", 3, $lfn);
}

function
LogVar(&$Var, $vn, $pit, $itw, $nlvl, $m = '')
{
    if(
$nlvl>=16) return;
    if(
$nlvl==0){$tv=serialize($Var);$tv=unserialize($tv);}
    else
$tv=&$Var;
   
$it=$pit.$itw;
    for(
$i=0; $i<$nlvl;$i++) $it.='.'.$itw;
   
$o='';$nl="\n";
    if(
is_array($tv))
    {
        if(
strlen($vn)>0) $o.=$it.$m.'<array> $'.$vn.' = (';
        else
$o.="\r".$it.$m.'<array> = (';
       
$o.= $nl;$AK=array_keys($tv);
        foreach(
$AK as $AN) {$AV=&$tv[$AN];$o.=LogVar($AV,$AN,$pit,$itw,$nlvl+1);}
       
$o.=$it.')'.$nl;
    }
    else if(
is_string($tv))
    {
        if(
strlen($vn)>0)$o.=$it.$m.'<string> $'.$vn.' = ';
        else
$o.=' '.$m.'<string> = ';
        if(
$tv===null) $o.='NULL';
        else
$o.='"'.$tv.'"';
       
$o.=$nl;
    }
    else if(
is_bool($tv))
    {
        if(
strlen($vn) > 0) $o.=$it.$m.'<boolean> $'.$vn.' = ';
        else
$o.=' '.$m.'<boolean> = ';
        if(
$tv===true) $o.='TRUE';
        else
$o.='FALSE';
       
$o.=$nl;
    }
    else if(
is_object($tv))
    {
        if(
strlen($vn)>0)
        {
           
$o.=$pit.$itw;
            for(
$i=0;$i<$nlvl;$i++) $o.='.'.$itw;
           
$o.=$m.'<'.get_class($tv).'::$'.$vn.'> = {'.$nl;
        }
        else
$o.=' '.$m.'<'.get_class($tv).'::> = {'.$nl;
       
$R=new ReflectionClass($tv);
       
$o.=$it.'.'.$itw.'Class methods {'.$nl;
       
$CM=$R->getMethods();
        foreach(
$CM as $MN => $MV)
        {
           
$o.=$it.'.'.$itw.'.'.$itw.implode(' ',Reflection::getModifierNames($MV->getModifiers())).' '.$MV->getName().'(';
           
$MP=$MV->getParameters(); $ct='';
            foreach(
$MP as $MPN => $MPV)
            {
               
$o.=$ct; $o.=$MPV->isOptional()?'[':'';
                if(
$MPV->isArray()) $o.='<array> ';
                else if(
$MPV->getClass()!==null) $o.='<'.$MPV->getClass()->getName().'::> ';
               
$o.=$MPV->isPassedByReference()?'&':''; $o.='$'.$MPV->getName();
                if(
$MPV->isDefaultValueAvailable())
                 {
                    if(
$MPV->getDefaultValue()===null) $o.=' = NULL';
                    else if(
$MPV->getDefaultValue()===true) $o.=' = TRUE';
                    else if(
$MPV->getDefaultValue()===false) $o.=' = FALSE';   
                    else
$o.=' = '.$MPV->getDefaultValue();   
                }
               
$o.=$MPV->isOptional()?']':''; $ct=', ';
            }
           
$o.=')'.$nl;
        }
       
$o.=$it.'.'.$itw.'}'.$nl; $o.=$it.'.'.$itw.'Class properties {'.$nl;
       
$CV=$R->getProperties();
        foreach(
$CV as $CN => $CV)
        {
           
$M=implode(' ',Reflection::getModifierNames($CV->getModifiers())).' ';
           
$CV->setAccessible(true);
           
$o.=LogVar($CV->getValue($tv),$CV->getName(),$pit,$itw,$nlvl+2,$M);
        }
       
$o.=$it.'.'.$itw.'}'.$nl; $o.=$it.'.'.$itw.'Object variables {'.$nl;
        
$OVs=get_object_vars($tv);   
        foreach(
$OVs as $ON => $OV) $o.=LogVar($OV,$ON,$pit,$itw,$nlvl+2);
       
$o.=$it.'.'.$itw.'}'.$nl; $o.=$pit.$itw;
        for(
$i=0;$i<$nlvl;$i++)    $o.='.'.$itw;
       
$o.='}'.$nl;
    }
    else
    {
        if(
strlen($vn)>0) $o.=$it.$m.'<'.gettype($tv).'> $'.$vn.' = '.$tv;
        else
$o.=' '.$m.'<'.gettype($tv).'> = '.$tv;
       
$o.=$nl;
    }         
    return
$o;   
}
//test
date_default_timezone_set('Europe/Bucharest');
$date = new DateTime('2010-01-28');
LogTrace($date);
?>
up
-3
aryel at iku dot com dot br
16 years ago
An easy function to pull all details of the debug backtrace:

<?php
function getDebugBacktrace($NL = "<BR>") {
   
$dbgTrace = debug_backtrace();
   
$dbgMsg .= $NL."Debug backtrace begin:$NL";
    foreach(
$dbgTrace as $dbgIndex => $dbgInfo) {
       
$dbgMsg .= "\t at $dbgIndex  ".$dbgInfo['file']." (line {$dbgInfo['line']}) -> {$dbgInfo['function']}(".join(",",$dbgInfo['args'])")$NL";
    }
   
$dbgMsg .= "Debug backtrace end".$NL;
    return
$dbgMsg;
}
?>

Then you can call it anywhere you want to get a string with the debug backtrace in readable format (i.e. your error handling function)

<?php
$backtrace
= getDebugBacktrace();
echo
"Fatal error! Cannot connect to database!";
echo
$backtrace;
?>

If you're running on command line, you might want to replace the line split. You can do that thru the function argument:

<?php
$backtrace
= getDebugBacktrace("\n");
echo
"Error! Server is running out of foos! Dumping error backtrace";
echo
$backtrace;
?>

Hope that helps,
Aryel
To Top