Compression Filters

While the Compression Wrappers provide a way of creating gzip and bz2 compatible files on the local filesystem, they do not provide a means for generalized compression over network streams, nor do they provide a means to begin with a non-compressed stream and transition to a compressed one. For this, a compression filter may be applied to any stream resource at any time.

Nota: Compression filters do not generate headers and trailers used by command line utilities such as gzip. They only compress and decompress the payload portions of compressed data streams.

zlib.deflate and zlib.inflate

zlib.deflate (compression) and zlib.inflate (decompression) are implementations of the compression methods described in » RFC 1951. The deflate filter takes up to three parameters passed as an associative array. level describes the compression strength to use (1-9). Higher numbers will generally yield smaller payloads at the cost of additional processing time. Two special compression levels also exist: 0 (for no compression at all), and -1 (zlib internal default -- currently 6). window is the base-2 log of the compression loopback window size. Higher values (up to 15 -- 32768 bytes) yield better compression at a cost of memory, while lower values (down to 9 -- 512 bytes) yield worse compression in a smaller memory footprint. Default window size is currently 15. memory is a scale indicating how much work memory should be allocated. Valid values range from 1 (minimal allocation) to 9 (maximum allocation). This memory allocation affects speed only and does not impact the size of the generated payload.

Nota: Because compression level is the most commonly used parameter, it may be alternatively provided as a simple integer value (rather than an array element).

zlib.* compression filters are available if zlib support is enabled.

Example #1 zlib.deflate and zlib.inflate

<?php
$params
= array('level' => 6, 'window' => 15, 'memory' => 9);

$original_text = "This is a test.\nThis is only a test.\nThis is not an important string.\n";
echo
"The original text is " . strlen($original_text) . " characters long.\n";

$fp = fopen('test.deflated', 'w');
stream_filter_append($fp, 'zlib.deflate', STREAM_FILTER_WRITE, $params);
fwrite($fp, $original_text);
fclose($fp);

echo
"The compressed file is " . filesize('test.deflated') . " bytes long.\n";
echo
"The original text was:\n";
/* Use readfile and zlib.inflate to decompress on the fly */
readfile('php://filter/zlib.inflate/resource=test.deflated');

/* Generates output:

The original text is 70 characters long.
The compressed file is 56 bytes long.
The original text was:
This is a test.
This is only a test.
This is not an important string.

*/
?>

Example #2 zlib.deflate simple

<?php
$original_text
= "This is a test.\nThis is only a test.\nThis is not an important string.\n";
echo
"The original text is " . strlen($original_text) . " characters long.\n";

$fp = fopen('test.deflated', 'w');
/* Here "6" indicates compression level 6 */
stream_filter_append($fp, 'zlib.deflate', STREAM_FILTER_WRITE, 6);
fwrite($fp, $original_text);
fclose($fp);

echo
"The compressed file is " . filesize('test.deflated') . " bytes long.\n";

/* Generates output:

The original text is 70 characters long.
The compressed file is 56 bytes long.

*/
?>

bzip2.compress and bzip2.decompress

bzip2.compress and bzip2.decompress work in the same manner as the zlib filters described above. The bzip2.compress filter accepts up to two parameters given as elements of an associative array: blocks is an integer value from 1 to 9 specifying the number of 100kbyte blocks of memory to allocate for workspace. work is also an integer value ranging from 0 to 250 indicating how much effort to expend using the normal compression method before falling back on a slower, but more reliable method. Tuning this parameter effects only compression speed. Neither size of compressed output nor memory usage are changed by this setting. A work factor of 0 instructs the bzip library to use an internal default. The bzip2.decompress filter only accepts one parameter, which can be passed as either an ordinary boolean value, or as the small element of an associative array. small, when set to a true value, instructs the bzip library to perform decompression in a minimal memory footprint at the cost of speed.

bzip2.* compression filters are available if bz2 support is enabled.

Example #3 bzip2.compress and bzip2.decompress

<?php
$param
= array('blocks' => 9, 'work' => 0);

echo
"The original file is " . filesize('LICENSE') . " bytes long.\n";

$fp = fopen('LICENSE.compressed', 'w');
stream_filter_append($fp, 'bzip2.compress', STREAM_FILTER_WRITE, $param);
fwrite($fp, file_get_contents('LICENSE'));
fclose($fp);

echo
"The compressed file is " . filesize('LICENSE.compressed') . " bytes long.\n";

/* Generates output:

The original file is 3288 bytes long.
The compressed file is 1488 bytes long.

*/
?>
add a note add a note

User Contributed Notes 4 notes

up
9
Anonymous
9 years ago
To read a gzip encoded stream from http
<?php
$opts
= [
   
"http" => [
       
"method" => "GET",
       
"header" => [ "Accept-Encoding: gzip" ],
    ]
];
$ctx = stream_context_create($opts);
$f = fopen("http://php.net", "r", false, $ctx);
// check  stream_get_meta_data($f)["wrapper_data"] has "Content-Encoding: gzip"
stream_filter_append($f, "zlib.inflate", STREAM_FILTER_READ, ["window" => 30]);
echo
stream_get_contents($f); // any stream processing
fclose($f);
up
1
Anonymous
3 years ago
To use the zlib.inflate filter with data originally written using gzcompress() or zlib.deflate, set the window option to 15 as outlined here: https://bugs.php.net/bug.php?id=68556

<?php
$fh
= fopen(file_name, 'rb');
stream_filter_append($fh, 'zlib.inflate', STREAM_FILTER_READ, ['window' => 15]);
$contents = stream_get_contents($fh);
fclose($fh);
up
2
bohwaz
6 years ago
Please note that there is currently a bug in this feature. ftell(), fseek() and fstat() functions cannot be used. Writing to a stream after using this function will not change the stream position as it should.

See bug: https://bugs.php.net/bug.php?id=49874

Also the zlib filters don't work with php://temp, php://memory and php://input streams, nothing is outputted to those streams.
up
-1
TingSong
1 year ago
To decompress a gzipped stream:

<?php
$stream
= fopen('https://example.com/some/file.txt.gz', 'rb');
stream_filter_append($stream, 'zlib.inflate', STREAM_FILTER_READ, ['window' => 15+16]);

// read the decompressed line directly
$line = fgets($stream);

// process the lines
?>

As the doc of zlib https://www.zlib.net/manual.html#Advanced

The 'window' parameter between 8 and 15 specified the window size from 2⁸ to 2¹⁵ bytes. It can be added by 16 for wrapping with gzip header and trailer instead of zlib wrapper.

And, window could be -8..-15 for unwrapping RAW deflate data.
To Top