memory_get_usage

(PHP 4 >= 4.3.2, PHP 5, PHP 7, PHP 8)

memory_get_usageRestituisce la quantità di memoria allocata dal PHP

Descrizione

memory_get_usage(): int

Restituisce la quantità di memoria, in byte, allocata dal PHP per lo script.

memory_get_usage() sarà disponibile solo se il PHP viene compilato con la configurazione --enable-memory-limit

Example #1 Esempio di uso di memory_get_usage()

<?php
// Questo è solo un esempio. I numeri reali
// variano da sistema a sistema.

echo memory_get_usage() . "\n"; // 36640

$a = str_repeat("Hello", 4242);

echo
memory_get_usage() . "\n"; // 57960

unset($a);

echo
memory_get_usage() . "\n"; // 36744

?>

Vedere anche memory_limit.

add a note add a note

User Contributed Notes 15 notes

up
283
xelozz -at- gmail.com
14 years ago
To get the memory usage in KB or MB

<?php
function convert($size)
{
   
$unit=array('b','kb','mb','gb','tb','pb');
    return @
round($size/pow(1024,($i=floor(log($size,1024)))),2).' '.$unit[$i];
}

echo
convert(memory_get_usage(true)); // 123 kb
?>
up
35
Alex Aulbach
13 years ago
Note, that the official IEC-prefix for kilobyte, megabyte and so on are KiB, MiB, TiB and so on.

See http://en.wikipedia.org/wiki/Tebibyte

At first glance this may sound like "What the hell? Everybody knows, that we mean 1024 not 1000 and the difference is not too big, so what?". But in about 10 years, the size of harddisks (and files on them) reaches the petabyte-limit and then the difference between PB and PiB is magnificent.

Better to get used to it now. :)
up
16
stanislav dot eckert at vizson dot de
7 years ago
memory_get_usage() is used to retrieve the memory allocated to PHP only (or your running script). But intuitively, many people expect to get the memory usage of the system, based on the name of the function.

So if you need the overall memory usage, following function might be helpful. If retrieves the memory usage either in percent (without the percent sign) or in bytes by returning an array with free and overall memory of your system. Tested with Windows (7) and Linux (on an Raspberry Pi 2):

<?php

   
// Returns used memory (either in percent (without percent sign) or free and overall in bytes)
   
function getServerMemoryUsage($getPercentage=true)
    {
       
$memoryTotal = null;
       
$memoryFree = null;

        if (
stristr(PHP_OS, "win")) {
           
// Get total physical memory (this is in bytes)
           
$cmd = "wmic ComputerSystem get TotalPhysicalMemory";
            @
exec($cmd, $outputTotalPhysicalMemory);

           
// Get free physical memory (this is in kibibytes!)
           
$cmd = "wmic OS get FreePhysicalMemory";
            @
exec($cmd, $outputFreePhysicalMemory);

            if (
$outputTotalPhysicalMemory && $outputFreePhysicalMemory) {
               
// Find total value
               
foreach ($outputTotalPhysicalMemory as $line) {
                    if (
$line && preg_match("/^[0-9]+\$/", $line)) {
                       
$memoryTotal = $line;
                        break;
                    }
                }

               
// Find free value
               
foreach ($outputFreePhysicalMemory as $line) {
                    if (
$line && preg_match("/^[0-9]+\$/", $line)) {
                       
$memoryFree = $line;
                       
$memoryFree *= 1024// convert from kibibytes to bytes
                       
break;
                    }
                }
            }
        }
        else
        {
            if (
is_readable("/proc/meminfo"))
            {
               
$stats = @file_get_contents("/proc/meminfo");

                if (
$stats !== false) {
                   
// Separate lines
                   
$stats = str_replace(array("\r\n", "\n\r", "\r"), "\n", $stats);
                   
$stats = explode("\n", $stats);

                   
// Separate values and find correct lines for total and free mem
                   
foreach ($stats as $statLine) {
                       
$statLineData = explode(":", trim($statLine));

                       
//
                        // Extract size (TODO: It seems that (at least) the two values for total and free memory have the unit "kB" always. Is this correct?
                        //

                        // Total memory
                       
if (count($statLineData) == 2 && trim($statLineData[0]) == "MemTotal") {
                           
$memoryTotal = trim($statLineData[1]);
                           
$memoryTotal = explode(" ", $memoryTotal);
                           
$memoryTotal = $memoryTotal[0];
                           
$memoryTotal *= 1024// convert from kibibytes to bytes
                       
}

                       
// Free memory
                       
if (count($statLineData) == 2 && trim($statLineData[0]) == "MemFree") {
                           
$memoryFree = trim($statLineData[1]);
                           
$memoryFree = explode(" ", $memoryFree);
                           
$memoryFree = $memoryFree[0];
                           
$memoryFree *= 1024// convert from kibibytes to bytes
                       
}
                    }
                }
            }
        }

        if (
is_null($memoryTotal) || is_null($memoryFree)) {
            return
null;
        } else {
            if (
$getPercentage) {
                return (
100 - ($memoryFree * 100 / $memoryTotal));
            } else {
                return array(
                   
"total" => $memoryTotal,
                   
"free" => $memoryFree,
                );
            }
        }
    }

    function
getNiceFileSize($bytes, $binaryPrefix=true) {
        if (
$binaryPrefix) {
           
$unit=array('B','KiB','MiB','GiB','TiB','PiB');
            if (
$bytes==0) return '0 ' . $unit[0];
            return @
round($bytes/pow(1024,($i=floor(log($bytes,1024)))),2) .' '. (isset($unit[$i]) ? $unit[$i] : 'B');
        } else {
           
$unit=array('B','KB','MB','GB','TB','PB');
            if (
$bytes==0) return '0 ' . $unit[0];
            return @
round($bytes/pow(1000,($i=floor(log($bytes,1000)))),2) .' '. (isset($unit[$i]) ? $unit[$i] : 'B');
        }
    }

   
// Memory usage: 4.55 GiB / 23.91 GiB (19.013557664178%)
   
$memUsage = getServerMemoryUsage(false);
    echo
sprintf("Memory usage: %s / %s (%s%%)",
       
getNiceFileSize($memUsage["total"] - $memUsage["free"]),
       
getNiceFileSize($memUsage["total"]),
       
getServerMemoryUsage(true)
    );

?>

The function getNiceFileSize() is not required. Just used to shorten size in bytes.

Note: If you need the server load (CPU usage), I wrote a nice function to get that too: http://php.net/manual/en/function.sys-getloadavg.php#118673
up
19
jeff dot peck at snet dot net
15 years ago
To get the memory usage in KB or MB

<?php
   
function echo_memory_usage() {
       
$mem_usage = memory_get_usage(true);
       
        if (
$mem_usage < 1024)
            echo
$mem_usage." bytes";
        elseif (
$mem_usage < 1048576)
            echo
round($mem_usage/1024,2)." kilobytes";
        else
            echo
round($mem_usage/1048576,2)." megabytes";
           
        echo
"<br/>";
    }
?>
up
4
randolphothegreat at yahoo dot com
19 years ago
[EDIT by danbrown AT php DOT net: This is intended by the author to only be used with PHP 4 < 4.3.2.]

I'd just like to point out that although sandeepc at myrealbox dot com's idea for displaying the current memory usage is a good one, it's perhaps a bad idea to pipe the entire process list through grep. A better performing method would be to select only the process we're interested in:

<?php
$pid
= getmypid();
error_log('MEMORY USAGE (% KB PID ): ' . `ps --pid $pid --no-headers -o%mem,rss,pid`);
?>

True, it's not much of a performance boost, but every bit helps.
up
6
lorin dot weilenmann at gmail dot com
13 years ago
I can confirm that this function triggers a garbage collection. I have a script that exceeded 128MB of memory at some point and ended with a fatal error. I was confused, because the script dealt with some large files initially, but the memory load from that point on should have been marginal, and the error occurred at the very end.

Those large files were dealt in a dedicated function and i even used unset() on the variable holding the file after the file was written to disk inside that function. So the memory should have been cleared twice, first after the unset() call, and second once the function ended.

To debug the memory usage, I called memory_get_usage(true) at some points and echo-ed the memory allocation. Just by adding a few echos here and there in the script, the memory usage never exceeded 1MB overhead (on top of the current file size) and the memory error disappeared.
up
0
yousha dot a at hotmail dot com
6 years ago
Note that the description for `memory_get_usage` is different than it's default parameter!

"`int memory_get_usage ([ bool $real_usage = FALSE ] )`
Returns the amount of memory, in bytes, that's currently being allocated to your PHP script. "

Default parameter = `FALSE`

WRONG description: Returns the amount of memory, in bytes, that's currently being allocated to your PHP script.

It must be: Returns the amount of memory, in bytes, that's currently used by your PHP script.
up
0
ad-rotator.com
20 years ago
The method sandeepc at myrealbox dot com posted yields larger memory usage, my guess is that it includes all the PHP interpreter/internal code and not just the script being run.

1) Use ps command
MEMORY USAGE (% KB PID ):  0.8 12588 25087 -> about 12MB
2) Use memory_get_usage()
int(6041952) -> about 6MB
up
-1
miami at blackcrystal dot net
9 years ago
Sometimes, we need all memory to run our task, we do ini_set('memory_limit',  -1 ), or maximum value we have.

To avoid stuck of server on long and memory consuming tasks, i wrote this check. This is not the same as memory_get_usage() do, but more. It shows virtual memory amount, taken by your process. In percents.

<?php
   
function getVirtualMemoryTaken()
    {
       
$pid = getmypid();
       
$a = `ps -p $pid v | awk 'END{print $9}'`;
        return
$a*1;
    }
?>

It works only in linux, tested in Ubuntu 14.

<?php
    $a
= ' ';
    do { 
$a .= $a . $a; }
    while (
getVirtualMemoryTaken() < 20 );
?>
up
-4
e dot a dot schultz at gmail dot com
18 years ago
This is a function that should work for both Windows XP/2003 and most distrabutions of UNIX and Mac OS X.

<?php
if( !function_exists('memory_get_usage') )
{
    function
memory_get_usage()
    {
       
//If its Windows
        //Tested on Win XP Pro SP2. Should work on Win 2003 Server too
        //Doesn't work for 2000
        //If you need it to work for 2000 look at http://us2.php.net/manual/en/function.memory-get-usage.php#54642
       
if ( substr(PHP_OS,0,3) == 'WIN')
        {
               if (
substr( PHP_OS, 0, 3 ) == 'WIN' )
                {
                   
$output = array();
                   
exec( 'tasklist /FI "PID eq ' . getmypid() . '" /FO LIST', $output );
       
                    return
preg_replace( '/[\D]/', '', $output[5] ) * 1024;
                }
        }else
        {
           
//We now assume the OS is UNIX
            //Tested on Mac OS X 10.4.6 and Linux Red Hat Enterprise 4
            //This should work on most UNIX systems
           
$pid = getmypid();
           
exec("ps -eo%mem,rss,pid | grep $pid", $output);
           
$output = explode("  ", $output[0]);
           
//rss is given in 1024 byte units
           
return $output[1] * 1024;
        }
    }
}
?>
up
-3
vesa dot kivisto at nepton dot fi
19 years ago
[EDIT by danbrown AT php DOT net: This function will only extend Windows versions of PHP where the server has the required third-party software.]

I was unable to get the previous examples working properly and created code which works at least for me. Enjoy!

<?php
// Please note that you'll need the pslist.exe utility from http://www.sysinternals.com/Utilities/PsTools.html
// This is because win/2000 itself does not provide a task list utility.
//
function getMemoryUsage() {

// try to use PHP build in function
if( function_exists('memory_get_usage') ) {
  return
memory_get_usage();
}

// Try to get Windows memory usage via pslist command
if ( substr(PHP_OS,0,3) == 'WIN') {
 
 
$resultRow = 8;
 
$resultRowItemStartPosition = 34;
 
$resultRowItemLength = 8;
 
 
$output = array();
 
exec('pslist -m ' . getmypid() , $output);
   
  return
trim(substr($output[$resultRow], $resultRowItemStartPosition, $resultRowItemLength)) . ' KB';
 
}


// No memory functionality available at all
return '<b style="color: red;">no value</b>';
 
}
?>
up
-5
MagicalTux at FF dot st
19 years ago
When you need to get the OS, do not use $_SERVER['OS'] or $_ENV['OS'], better use PHP_OS constant !
<?php
if (substr(PHP_OS,0,3)=='WIN') {
 
// [...]
}
?>

You also have other values such as CYGWIN_NT-5.0, Linux, ... this is the best way to get system's os (anyone on linux can do an "export OS=windows")
up
-7
guenter_doege at web dot de
19 years ago
The Win XP / 2003 workaround script will also work with windows 2000 with a few slight modifications.

Please note that you'll need the pslist.exe utility from http://www.sysinternals.com/Utilities/PsTools.html because win/2000 itself does not provide a task list utility.

<?php

function getMemUsage()
{
    
       if (
function_exists('memory_get_usage'))
       {
           return
memory_get_usage();
       }
       else if (
substr(PHP_OS,0,3) == 'WIN')
       {
          
// Windows 2000 workaround

          
$output = array();
          
exec('pslist ' . getmypid() , $output);
           return
trim(substr($output[8],38,10));
       }
       else
       {
           return
'<b style="color: red;">no value</b>';
       }
}
?>
up
-10
joe at schmoe dot com
17 years ago
the various memory_get_usage replacements here don't seem to work on Mac OS X 10.4(Intel)

I got it to work like this...

<?php
function memory_get_usage()
{
    
$pid = getmypid();
    
exec("ps -o rss -p $pid", $output);
     return
$output[1] *1024;
}
?>
up
-11
miteigi nemoto (miteigi at yandex dot ru)
15 years ago
Decision a memory_get_usage problem for windows system

Tested OS: Windows XP
Server: Apache

PHP must be loaded as CGI to get correctly memory usage by Process ID ( getmypid() ) and with cmd-tools like tasklist.exe

PHP as CGI have your own PID instead constant Apache PID and you get a true memory size independed form Apache memory usage.

Configure in httpd.conf of Apache:

1. Comment the line like this:
LoadModule php4_module "/usr/local/php/sapi/php4apache.dll"
or
LoadModule php5_module "/usr/local/php5/php5apache.dll"

2. Add this and edit your path to php:
<Directory "z:/usr/local/php">
  Options ExecCGI
</Directory>
ScriptAlias "/__php_dir__/" "z:/usr/local/php/"
Action application/x-httpd-php "/__php_dir__/php.exe"

3. Restart Apache

Use this PHP-code:

<?php
/**
* A memory_get_usage() for Windows System, wich compiled without --enable-memory-limit
* PHP must be loaded as CGI
* Greetings form miteigi nemoto
* @return string
*/
function memory_get_usage_by_tasklist()
{
   
$output = array();
   
exec( 'tasklist ', $output );
    foreach (
$output as $value)
    {
       
$ex=explode(" ",$value);
       
$count_ex=count($ex);
        if (
eregi(" ".getmypid()." Console",$value))
        {
           
$memory_size=$ex[$count_ex-2]." Kb";
            return
$memory_size;
        }
    }
}
echo
memory_get_usage_by_tasklist();
?>
To Top