I struggled to get imagick installed for mamp and dug high and low. I
was left with the impression that so many struggle with opensource and
this type of install that it is almost a right of passage. For my part, I
managed to find two threads that helped me and the steps work. A lot
of people talked about macports and pear installs which are fine(I tried
them), but 1) they sometimes don't get the latest version of what
you need and 2) I can't tell what they're doing and where they're doing it.
It's much easier to me to download the stuff where i want it and be
sure of what i got!
First of all download a tar image of the ImageMagick install from here:
sourceforge.net/projects/imagemagick/files/
Unpack it and then from terminal issue the following commands in
quotes:
1. "cd ImageMagick-6.5.7" - go where you placed the folder
2. "./configure"
3. "make"
If ImageMagick configured and compiled without complaint, you are
ready to install it on your system. Administrator privileges are
required to install. To install, type the following command in terminal:
1. "sudo make install"
To check your ImageMagick installation enter the following command
in terminal:
1. "make check"
Remember all commands are entered into terminal in the directory in
which you unzipped your downloaded ImageMagick tar file. (the latest
version of which at this time of writing is ImageMagick-6.5.7.)
Next we need to install Imagick.so which is what we want for PHP.
First of all we need to get the right file and we can get that from here:
pecl.php.net/package/imagick/download
At current writing the latest stable version is imagick-2.3.0.
Unpack the tar file and then enter the commands in quotes in terminal:
1. "cd imagick-2.2.3" - go where you placed the folder
2. "phpize"
3. "./configure --with-imagick=/opt/local"
4. "make"
5. "make install"
If you look at the bottom of the output, it will tell you where it has
placed the imagick.so module. For me it was placed in:
/imagick-2.3.0/modules
which is where i had unpacked the downloaded imagick-2.3.0 file.
Then copy it into your MAMP PHP extensions folder.
For me it was:
/Applications/MAMP/bin/php5/lib/php/extensions/no-debug-non-zts
-20050922/
Then, for PHP to honor the the extension, add the following line to the
extensions section of your php.ini file:
extension=imagick.so
You should now have a working imagick extension with all of the
resources for php found here:
php.net/manual/en/book.imagick.php
I will not claim credit for anyone for whom this works, that goes to:
Imagemagick who posted instructions here:
www.imagemagick.org/script/install-source.php
and Wallance who posted his experience here:
www.daniweb.com/forums/thread194181.html#
I really hope this helps others because developing this stuff is
frustrating enough without spending hours or even days just trying to set
up the development environment so you can use the tools.
Installazione
Questa estensione » PECL non รจ incorporata nel PHP.
Informazioni per l'installazione di questa estensione PECL possono essere trovate nel capitolo del manuale intitolato Installazione delle estensioni PECL. Informazioni aggiuntive come nuove release, download, file sorgenti, informazioni del manutentore e un CHANGELOG possono essere trovate qui: » https://pecl.php.net/package/imagick.
Nota: The official name of this extension is imagick.
Windows users can download prebuilt DLL from the » PECL website.
These packages already contain the extension DLL (php_imagick.dll)
which needs to be put into the extension_dir.
They also contain the ImageMagick DLLs, which need to be put somewhere in the PATH.
As of Imagick 3.6.0, they also contain XML configuration files in config;
to use these instead of the built-in defaults, they need to put into %USERPROFILE%/.config/ImageMagick,
or alternatively in the path given by the environment variable MAGICK_CONFIGURE_PATH.
Refer to the » ImageMagick configuration files documentation
for further details.
add a note
User Contributed Notes 19 notes
gmorris at ilogsystems dot com ¶
15 years ago
barthuisman at gmail dot com ¶
7 years ago
If you're on a Ubuntu or debian machine, please don't dive into all those pecl stuff, but just use:
sudo apt-get install php7.1-imagick
where php7.1 is your php version, so could be different.
Robert Badi Baldursson ¶
6 years ago
I have XAMPP version 3.2.2 and PHP 7.1. I was having trouble installing imagick by following Ian Co's notes and then some other very well written tutorials.
However, the imagick module would never show up in phpinfo() but only in the console when typing "php -i" which I found very odd.
It finally turned out that the mistake was to tell me to copy ImageMagic's CORE_RL_* and IM_MOD_RL_* files to C:\xampp\Apache\bin. They needed to be copied to the php root folder where php.exe resides (C:\xampp\php).
When I did that ... boom ... imagick module appeared in phpinfo() finally!
holdoffhunger at gmail dot com ¶
11 years ago
There is a big disclaimer that should be made to all those about to venture on ImageMagick programming using PHP: the great, vast majority of WAMP (Windows-Apache-MySQL-PHP) servers do not support ImageMagick commands at all, since it is a "different package," and there appears to be no way to install ImageMagick through standard Add/Remove Applications within Linux (as far as standard Debian linux releases go). It's very easy to get Apache/PHP running in either Windows or Linux with pretty much any standard OS/distro supported so that you can run all of your own code on your own computer. But that's definitely not the case when you want Imagick to cooperate with your Apache server and your PHP code!
It took me almost an entire week just to get Apache/PHP/ImageMagick working all together nice and happily so that I could run my own PHP code on my own machine (natively, too). So, I decided to simply write down the steps, to help anyone else out who could need help.
Guide to Building an Apache/PHP/Imagick Server with Linux/CentOS 6.4:::
1. Install CentOS 6.4. (Theoretically, other versions of CentOS should work as well, but I simply chose the most recent one.) Also, you can very easily emulate CentOS within Windows (for instance, the unfree choice of VMWare).
2. Install PHP, PHP-Common, PHP-extensions, etc., from standard Application Package Manager ("Add/Remove Programs", usually in system tools somewhere). (You don't have to worry about Apache, because that comes with CentOS 6.4 anyway.)
3. Open up a terminal and enter admin mode with the command "su". You'll need a password for this.
4. Enter this command: yum install ImageMagick ImageMagick-devel
5. Enter this command: pecl install imagick
6. Modify php.ini and include the line "extension=imagick.so". This file is located at "/etc/php.ini" normally. The line must be exactly inserted in the section of "Dynamic Extensions", which begins with this commented out text:
--------------------------------
;;;;;;;;;;;;;;;;;;;;;;
; Dynamic Extensions ;
;;;;;;;;;;;;;;;;;;;;;;
--------------------------------
Use the "search" feature of gedit to find the text. Add the extension below the commented out note in this section so that the result looks like:
--------------------------------
;;;;
; Note: packaged extension modules are now loaded via the .ini files
; found in the directory /etc/php.d; these are loaded by default.
;;;;
extension=imagick.so
--------------------------------
Putting the extension directly at the top caused me serious permission issues in running Imagick code. Also, with CentOS, the permissions automatically disable user control for this php.ini. Enter the following terminal command: "chown [YOUR-USERNAME] -R /etc/php.ini", without the quotes to get control to modify it. Note to insert your username where it states "[YOUR-USERNAME]".
7. Enter this command: "service httpd restart", without quotes, from admin mode. This restarts Apache/PHP/PHP's extensios now that you've installed ImageMagick. If this gives you an error, just try "service httpd start".
My favorite part about this method is that you can update your system with issuing the "yum update" command and then the "yum upgrade" command -- and the Apache/PHP/Imagick combo will still be working perfectly! Unlike some other guides out there for this, you don't need to rely on antiquated, unsupported versions that can be nearly impossible to find. Also, you don't need to worry about the MySQL, Hash, MBString, Exif packages, because they all seem to be installed and properly cooperating with PHP automatically after installing PHP from the Application Manager. This solution makes everything work well together.
The root directory of your public files is located at /var/www/html/. Normally, this folder is not owned by the user, so you'll get a permission error when trying to add files or folders to it. Correct that with entering admin mode in the terminal/command-line window ("su" command) and entering the following command: "chown [YOUR-USERNAME] -R /var/www/html/", without quotes. Again, replace "[YOUR-USERNAME]" with your actual user name. (Warning: The first time I did this, I was lazy and entered the command for only the "/var/" folder, which prevented my system ever from booting. It would always freeze with the notorious and googleable erro-message: "Could not update ICEauthority file /var/lib/gdm/.ICEauthority". So, make sure to change ownership only for "/var/www/html/".)
To view your root directory files as compiled, resultant, PHP pages, open up a browser and enter "127.0.0.1" as the address. So, a file in your root directory would be accessed at the following URL in your browser: http://127.0.0.1/your.file.php . If you get a "could not connect" error message, try the command "service httpd start" at the terminal window from admin mode. (You have to start this service manually every time the machine boots, although there's plenty of ways to automate it.)
I hope this helps! I tried a hundred different guides on getting Apache/PHP/Imagick to work together and none of them worked. Don't give up! ImageMagick is a package of really neat imaging functions!
kmteoh at hotmail dot com ¶
10 years ago
for PHP 5.3 Windows user who try to install, here is the note where I have spent near 4 hours to get concluded:
- you need NOT LATEST but 6.7.7 imagemagic engine: http://ftp.sunet.se/pub/multimedia/graphics/ImageMagick/binaries/ImageMagick-6.7.7-5-Q16-windows-dll.exe (tips by justinjacob @ http://stackoverflow.com/questions/20440968/installing-php-imagick-dll-php-extension-on-wampserver-2-2)
- http://windows.php.net/downloads/pecl/releases/imagick/3.1.2/ TS version work just fine, make sure you restart apache after install both above, in order.
- if it says 'CORE_RL_WAND' not found, you probably want to move all CORE_* files from /ext folder to one above.
Ultimater at gmail dot com ¶
15 years ago
Installing Imagick on Windows isn't too hard. I followed the guide at http://valokuva.org/?page_id=50 and managed to install it without too much sweat.
1. Visit http://imagemagick.org/script/binary-releases.php#windows and download "ImageMagick-6.5.4-6-Q16-windows-dll.exe"
2. Pick a version at http://valokuva.org/outside-blog-content/imagick-windows-builds/ The directories are in YYMMDD format. The latest version that worked for me was 2008-Jul-09 so download 080709/php_imagick_dyn-Q16.dll respectively.
3. Rename php_imagick_dyn-Q16.dll to "php_imagick.dll" and move it to php/ext
4. open php.ini, and make sure
extension=php_imagick.dll
appears in the file and uncommented then resave.
Note: phpinfo() will tell you the location of the loaded php.ini file.
5. Re-start your webserver.
That's it, a simple test will tell you if your installation was successful.
<?php
$im = new Imagick();
$im->newPseudoImage(100, 100, "magick:rose");
$im->setImageFormat("png");
$im->roundCorners(5,3);
$type=$im->getFormat();
header("Content-type: $type");
echo $im->getimageblob();
?>
Anonymous ¶
1 year ago
Using imagick with xampp on windows 10:
it took me some time to make it work but in the end it was just me messing up what version of imagick i downloaded.
go to C:\xampp\htdocs and create a test.php file with:
<?php
phpinfo();
?>
open C:\xampp\xampp-control.exe and start your Apache server.
in your browser open http://localhost/test.php
`CTRL F` search for `PHP Version` and write down the PHP version. (example: 7.2.24)
`CTRL F` search for `Thread Safety` and check if its enabled of disabled (example: Enabled)
`CTRL F` search for `Architecture` and the Architecture type (example: x64)
go to https://mlocati.github.io/articles/php-windows-imagick.html and select your php version, thread safety and Architecture and download the .zip. (example php_imagick-3.4.4-7.2-ts-vc15-x64.zip)
place the zip inside of C:\xampp\php and extract it.
also place the zip inside of C:\xampp\php\ext and extract it.
open file C:\xampp\php\php.ini and `CTRL F` search for `; Dynamic Extensions ;` and add the line `extension=php_imagick.dll`.
open C:\xampp\xampp-control.exe and restart your Apache server.
in your browser open http://localhost/test.php and `CTRL F` search for `imagick` and it should be added.
Baasha ¶
11 years ago
To install on debian simply try:
apt-get install php5-imagick
on ubuntu:
sudo apt-get install php5-imagick
gollariel at gmail dot com ¶
9 years ago
I had an error during installation:
checking ImageMagick MagickWand API configuration program... found in /usr/bin/Wand-config
checking if ImageMagick version is at least 6.2.4... configure: error: no. You need at least Imagemagick version 6.2.4 to use Imagick.
ERROR: `/tmp/pear/temp/imagick/configure --with-imagick' failed
Set is obtained as follows:
sudo apt-get remove graphicsmagick-libmagick-dev-compat imagemagick imagemagick-common
sudo apt-get autoremove
sudo apt-get install libmagickwand-dev
sudo pecl install imagick-beta
scottchu dot tw at gmail dot com ¶
15 years ago
PECL install imagick contantly fails due to the server is behind some firewall, so one may try 'phpize' way to install.
However, someone like me who doesn't want to use default options may experience thru failure situation. And if you google thru the cloud, you may find many people tell you to rpm imagick-devel with yum or apt. That does solve the problem.
However, In my case, my server already has php 5.3.1 installed under /usr/lcal/php & the linux doesn't have yum or apt service. Furthermore, I just installed imagemagick yesterday (Also quite a battle =.=) under /usr/local/imk
(note: You may see that I don't like default options, I like to install each package under different dir under /usr/local).
Today, I want to install imagick, so this is what I do:
1> add /usr/local/php/bin & /usr/local/imk/bin to path.
2> download imagick source of intended version (I use 3.0.b1).
3> enter that dir & issue 'phpize'.
(note:I got a habit to issue './configure --help > oo' & 'view oo' to see all the options first before installation)
4> 'vi configure' & find LIBS, then add '-l/usr/local/imk/lib' after it.
5> issue './configure --prefix=/usr/local/ik4php' --with-imagick='/usr/local/imk'.
(note: with-imagick points out where you install the imagicmagick package before, this name 'imagick' is not appropriate since it incurs ambiguity with imagick for php =.=)
6> after it's done, issue 'make'.
7> after make is done, issue 'make install'.
(note:the last two output lines will tell you where to find the generated shared object library file: imagick.so)
8> go to that dir & copy imagick.so to the extension dir defined in php.ini.
(note: in my case it's /usr/local/php/ext)
9> edit php.ini to add 'extension=imagick.so' line.
10> stop & start apache or just restart apache.
(note: if you have tomcat + apache + jk module installation style as mine, shutdown tomcat, stop apache, then startup tomcat first, then start apache)
If you have similar server environment & situation as mine, hope this article helps you.
Scott Chu @ Taiwan
elia weiss ¶
15 years ago
if you get the following error on windows (vista):
'The application has failed to start because its side-by-side
configuration is incorrect. Please see the application event log
for more detail.'
then install:
Visual C++ 2008 Redistributable Package (x86)
from:
http://www.microsoft.com/downloads
/details.aspx?familyid=A5C84275-3B97-4AB7-A40D-3802B2AF5FC2
see:
http://www.imagemagick.org/script/binary-releases.php#windows
for more info (scroll to the end of the page)
feedback at weknowtoomuch dot com ¶
11 years ago
I have PHP 5.3.24
I just did that:
- Download proper extension version from
http://windows.php.net/downloads/pecl/releases/imagick/
I picked 3.1.2 which is the latest non-beta at this time
- Unzip and copy php_imagick.dll to PHP ext folder
- add
[PHP_IMAGICK]
extension=php_imagick.dll
to php.ini
- Download recommended Imagick version and install from:
http://imagemagick.org/script/binary-releases.php#windows
( I chose to have C headers and also COM objects during installation)
- Restart apache
- Check phpinfo() for Imagick section... there it is!
Nothing out of ordinary for a PHP extension... I don't know what the fuss is...
support at vipp dot com dot au ¶
9 years ago
I tried installing imagick extension on WHM/Cpanel but it didn't work. the error message was
could not extract the package.xml file
This seems to be a bug in PHP 5.5 as reported by users.
I finally installed this extension from command line. Here are the steps I used just in case someone is experiencing similar problem and is looking for a solution.
1. install ImageMagick from rpm repository in WHM. the version I installed is ImageMagick 6.7.2-7
2. log in the server via ssh,
3. download the latest version of imagick, unpack and install. the version I downloaded is imagick-3.3.0RC2.tgz
wget http://pecl.php.net/get/imagick-3.3.0RC2.tgz
tar xvf imagick-3.3.0RC2.tgz
cd imagick-3.3.0RC2
phpize
./configure
make
make install
the extension was successfully installed
4. in WHM, go to PHP configuration editor, in advanced mode, search extension, and add imagick.so in the list of extension enabled. this can of course be added using a command line editor.
extension=imagick.so
5. restart apache. imagick is there now.
My server runs
PHP Version 5.5
cPanel Version 11.50.0 (build 30)
I hope it works for someone else too.
microzonebitzz at yahoo dot com ¶
7 years ago
With Ubuntu 16.04 (Xenial) with PHP 5.6 not 7. PHP 7 was disabled.
1. sudo apt-get update
2. sudo apt-get install imagemagick php5.6-imagick
Martin Vincent ¶
14 years ago
For PHP 5.3 I have read that these versions should work:
ImageMagick-6.5.9-0-Q16-windows-dll.exe
imagick-2.3.0-dev/vc9_nts/php_imagick.dll
Anonymous ¶
15 years ago
Installation of Imagick on Windows:
-------------------------------------------
Here an important hint for all who want to use Imagick:
First of all: Forget this PECL.
It is for Linux only.
In the old discussion boards I read that some years ago there was a DLL for PHP available on the FTP server of imagemagick.org. Once upon a time there has also been a CHM installation help file on FTP which also has been removed. The only thing you find today on the FTP server is a ridiculous text file:
ftp://ftp.imagemagick.org/pub/ImageMagick/php/windows/README.txt
This file contains 3 links:
2 links of them are dead meanwhile.
The only working one is this:
www.dirk.sh/dirk/magickwand
a page of a chinese guy who offers a MagickWand.dll for PHP of 4 MB size (Q8, static compiled)
But he discontinoued support since 2007.
There is no installation manual available.
He only writes:
"Please ref watson's post about how to install on Windows:
redux.imagemagick.org/discourse-server/viewtopic.php?t=4708"
This page which uses stupid style sheet settings like "font-size:11%" which make parts of the text unreadable also was no help.
At the end all manuals say the same:
Copy the DLL into the "ext" folder and add the entry to the php.ini:
extension=dllname
restart the Apache and you are done.
But this is not true: it simply does NOT work on Xampp.
In a DOS box entering
PHP.exe -i > Info.txt
prints all installed modules.
You also find:
"magickwand
MagickWand Backend Library => ImageMagick
MagickWand Extension Version => 1.0.5
ImageMagick support => enabled
ImageMagick version => ImageMagick 6.3.5 09/21/07 Q8 www.imagemagick.org
ImageMagick QuantumRange (MaxRGB) => 255
MagickWand supported image formats => A, ART, AVI, AVS, B, BIE, BMP, BMP2, BMP3, etc.."
But after executing phpinfo() MagickWand does NOT appear under the installed extensions. Strange!!
And the Wand commands do NOT function like:
$resource = NewMagickWand();
I also found a php_imagick.dll of 65 kB size in the internet which also does not work. It does not even appear in
PHP -i.
There is no error in the Apache logfile!
I read all I could find in the internet and wasted 2 entire days, without success, now I'm sick of Imagick and I absolutely cannot understand why the guys of imagemagick.org don't offer a ready compiled dll with an installation manual anymore?
In general the Imagick page seems not very trustworthy:
On the download page they do never explain what is the difference between the several versions. What doess static mean?
They never explain. (Static means that the convert.exe does not depend on so many dlls. It only requires one external DLL, for that it has a size of 5 MB instead of 200 kb)
And the explanation about the difference between Q8 and Q16 version is wrong: Q8 does NOT mean 8 Bits per pixel as the download page says. It means 8 Bit per color = 24 Bit per Pixel)
And I found an ugly misdesign:
If you install the Q8 version on your local PC and want to copy the files from your harddisk to the server, then convert.exe will crash!
Convert.exe depends on a Registry Entry. And if this is missing (on a server where you have not full access) it will crash. The strangest thing is that this registry key can contain any nonsense, it only must exist! How stupid!
So if you want to execute as an alternative the commandline tools like convert.exe from your PHP code you must add this Registry entries to the server:
HKEY_LOCAL_MACHINE\SOFTWARE\ImageMagick\6.5.1\Q:8\ConfigurePath
The value can be anything.
But with the commandline tools you cannot obtain the width and height of an image in your PHP code. This is not possible.
Dmitry Semenov ¶
11 years ago
If you tried to install it on Linux and got this message
pecl install imagick
/var/tmp/imagick/php_imagick.h:49:31: fatal error: wand/MagickWand.h: No such file or directory
compilation terminated.
make: *** [imagick_class.lo] Error 1
ERROR: `make' failed
this is what solves it:
yum install ImageMagick-devel
vbsaltydog ¶
14 years ago
I could not install via PECL or compiling from source because of an error from line 3339 of the configure file generated by phpize so I looked at the configure file at line 3339 and it was just a check for the PHP version using the php-config command with the --vernum switch which was not supported by my PHP version so I commented out that check from the configure file and then it would configure, compile, and install.
After installation, it put the shared object file in my php extension modules directory so I added an entry to my /etc/php.d directory to load the extension file and restarted apache and the imagick section is present in my info.php output.
brunomarcospereira at gmail dot com ¶
6 years ago
How to install Imagick in Windows 10 with PHP Built In Server:
1.0 - Download Imagick with its dependencies on: https://windows.php.net/downloads/pecl/deps/
1.1 - Copy all the .DLL from the "bin" folder to the root of your PHP (e.g.: C:\php-7.1.2-Win32-VC14-x64);
2.0 - Download the DLL according to your version of PHP in: http://pecl.php.net/package/imagick/3.4.3/windows
2.1 - Copy the DLL "php_imagick.dll" to the "ext" directory (e.g.: C:\php-7.1.2-Win32-VC14-x64\ext).
3.0 - Add the line in php.ini: extension=php_imagick.dll
4.0 - Restart the PHP server.
Note: the mime-types of the images will be "image/x-jpeg", "image/x-png"...
