a little addition to the example of pixel at minikomp dot com here below
<?php
function &func(){
static $static = 0;
$static++;
return $static;
}
$var1 =& func();
echo "var1:", $var1; // 1
func();
func();
echo "var1:", $var1; // 3
$var2 = func(); // assignment without the &
echo "var2:", $var2; // 4
func();
func();
echo "var1:", $var1; // 6
echo "var2:", $var2; // still 4
?>
Restituzione per riferimento
La restituzione per riferimento è utile quando si vuole usare una funzione per trovare quale variabile un riferimento dovrebbe limitare. Non utilizzare il ritorno per riferimento per incrementare le prestazioni, l'engine è capace di ottimizzare il codice per proprio conto. Restituire valori per riferimento solo se si hanno validi motivi tecnici. Per restituire per riferimento, si usa questa sintassi:
<?php
class foo {
public $value = 42;
public function &getValue() {
return $this->value;
}
}
$obj = new foo;
$myValue = &$obj->getValue(); // $myValue è un riferimento a $obj->value, che vale 42.
$obj->value = 2;
echo $myValue; // stampa il nuovo valore di $obj->value, es. 2.
?>Nota: Diversamente dal passaggio di un parametro, bisogna utilizzare
&in entrambi i posti - nella dichiarazione per indicare che si vuole restituire per riferimento, e non per copia come di consueto, e per indicare nella chiamata, il collegamento del riferimento, piuttosto che l'usuale assegnazione che verrebbe fatta per $myValue.
Nota: Se si tenta di restituire un valore per riferimento da una funzione con la sintassi:
return ($this->value);questo non funzionerà poiché si sta tentando di restituire per riferimento il risultato di un' espressione, e non una variabile. Da una funzione, si possono restituire per riferimento solo le variabili. A partire da PHP 4.4.0 e PHP 5.1.0, un erroreE_NOTICEè lanciato se il codice cerca di restituire un'espressione dinamica o un risultato dell'operatorenew.
Per utilizzare il riferimento restituito, occorre usare l'assegnazione per riferimento:
<?php
function &collector() {
static $collection = array();
return $collection;
}
$collection = &collector();
$collection[] = 'foo';
?><?php
function &collector() {
static $collection = array();
return $collection;
}
array_push(collector(), 'foo');
?>Nota: Si noti che
array_push(&collector(), 'foo');non funzionerà, ma creerà un errore fatale.
add a note
User Contributed Notes 19 notes
Spad-XIII ¶
16 years ago
stanlemon at mac dot com ¶
17 years ago
I haven't seen anyone note method chaining in PHP5. When an object is returned by a method in PHP5 it is returned by default as a reference, and the new Zend Engine 2 allows you to chain method calls from those returned objects. For example consider this code:
<?php
class Foo {
protected $bar;
public function __construct() {
$this->bar = new Bar();
print "Foo\n";
}
public function getBar() {
return $this->bar;
}
}
class Bar {
public function __construct() {
print "Bar\n";
}
public function helloWorld() {
print "Hello World\n";
}
}
function test() {
return new Foo();
}
test()->getBar()->helloWorld();
?>
Notice how we called test() which was not on an object, but returned an instance of Foo, followed by a method on Foo, getBar() which returned an instance of Bar and finally called one of its methods helloWorld(). Those familiar with other interpretive languages (Java to name one) will recognize this functionality. For whatever reason this change doesn't seem to be documented very well, so hopefully someone will find this helpful.
szymoncofalik at gmail dot com ¶
13 years ago
Sometimes, you would like to return NULL with a function returning reference, to indicate the end of chain of elements. However this generates E_NOTICE. Here is little tip, how to prevent that:
<?php
class Foo {
const $nullGuard = NULL;
// ... some declarations and definitions
public function &next() {
// ...
if (!$end) return $bar;
else return $this->nullGuard;
}
}
?>
by doing this you can do smth like this without notices:
<?php
$f = new Foo();
// ...
while (($item = $f->next()) != NULL) {
// ...
}
?>
you may also use global variable:
global $nullGuard;
return $nullGuard;
obscvresovl at NOSPAM dot hotmail dot com ¶
19 years ago
An example of returning references:
<?
$var = 1;
$num = NULL;
function &blah()
{
$var =& $GLOBALS["var"]; # the same as global $var;
$var++;
return $var;
}
$num = &blah();
echo $num; # 2
blah();
echo $num; # 3
?>
Note: if you take the & off from the function, the second echo will be 2, because without & the var $num contains its returning value and not its returning reference.
sandaimespaceman at gmail dot com ¶
16 years ago
The &b() function returns a reference of $a in the global scope.
<?php
$a = 0;
function &b()
{
global $a;
return $a;
}
$c = &b();
$c++;
echo
"
\$a: $a
\$b: $c
"
?>
It outputs:
$a: 1 $b: 1
rwruck ¶
18 years ago
The note about using parentheses when returning references is only true if the variable you try to return does not already contain a reference.
<?php
// Will return a reference
function& getref1()
{
$ref =& $GLOBALS['somevar'];
return ($ref);
}
// Will return a value (and emit a notice)
function& getref2()
{
$ref = 42;
return ($ref);
}
// Will return a reference
function& getref3()
{
static $ref = 42;
return ($ref);
}
?>
civilization28 at gmail dot com ¶
10 years ago
Zayfod's example above is useful, but I feel that it needs more explanation. The point that should be made is that a parameter passed in by reference can be changed to reference something else, resulting in later changes to the local variable not affecting the passed in variable:
<?php
function & func_b ()
{
$some_var = 2;
return $some_var;
}
function func_a (& $param)
{
# $param is 1 here
$param = & func_b(); # Here the reference is changed and
# the "&" in "func_a (& $param)"
# is no longer in effect at all.
# $param is 2 here
$param++; # Has no effect on $var.
}
$var = 1;
func_a($var);
# $var is still 1 here!!! Because the reference was changed.
?>
hawcue at yahoo dot com ¶
20 years ago
Be careful when using tinary operation condition?value1:value2
See the following code:
$a=1;
function &foo()
{
global $a;
return isset($a)?$a:null;
}
$b=&foo();
echo $b; // shows 1
$b=2;
echo $a; // shows 1 (not 2! because $b got a copy of $a)
To let $b be a reference to $a, use "if..then.." in the function.
anisgazig at gmail dot com ¶
2 years ago
<?php
$a = 9;
function &myF(){
global $a;
return $a;
}
//before modified the value
$func =& myF();
echo "$a and $func";
echo "\n";
//after modified the value
$func++;
echo "$a and $func";
fabian dot picone at gmail dot com ¶
6 years ago
This note seems not to apply with PHP 7:
"Note: If you try to return a reference from a function with the syntax: return ($this->value); this will not work as you are attempting to return the result of an expression, and not a variable, by reference. You can only return variables by reference from a function - nothing else. Since PHP 5.1.0, an E_NOTICE error is issued if the code tries to return a dynamic expression or a result of the new operator."
Bug following code works without error output. Same result as i would not have braces around $this-value.
<?php
class foo {
public $value = 42;
public function &getValue() {
return ($this->value);
}
}
$obj = new foo;
$myValue = &$obj->getValue();
$obj->value = 2;
echo $myValue;
benjamin dot delespierre at gmail dot com ¶
13 years ago
Keep in mind that returning by reference doesn't work with __callStatic:
<?php
class Test {
private static $_inst;
public static function & __callStatic ($name, $args) {
if (!isset(static::$_inst)){
echo "create";
static::$_inst = (object)"test";
}
return static::$_inst;
}
var_dump($a = &Test::abc()); // prints 'create'
$a = null;
var_dump(Test::abc()); // doesn't prints and the instance still exists in Test::$_inst
?>
spidgorny at gmail dot com ¶
14 years ago
When returning reference to the object member which is instantiated inside the function, the object is destructed upon returning (which is a problem). It's easier to see the code:
<?php
class MemcacheArray {
public $data;
...
/**
* Super-clever one line cache reading AND WRITING!
* Usage $data = &MemcacheArray::getData(__METHOD__);
* Hopefully PHP will know that $this->data is still used
* and will call destructor after data changes.
* Ooops, it's not the case.
*
* @return unknown
*/
function &getData($file, $expire = 3600) {
$o = new MemcacheArray($file, $expire);
return $o->data;
}
?>
Here, destructor is called upon return() and the reference becomes a normal variable.
My solution is to store objects in a pool until the final exit(), but I don't like it. Any other ideas?
<?php
protected static $instances = array();
function &getData($file, $expire = 3600) {
$o = new MemcacheArray($file, $expire);
self::$instances[$file] = $o; // keep object from destructing too early
return $o->data;
}
?>
zayfod at yahoo dot com ¶
20 years ago
There is a small exception to the note on this page of the documentation. You do not have to use & to indicate that reference binding should be done when you assign to a value passed by reference the result of a function which returns by reference.
Consider the following two exaples:
<?php
function & func_b ()
{
$some_var = 2;
return $some_var;
}
function func_a (& $param)
{
# $param is 1 here
$param = & func_b();
# $param is 2 here
}
$var = 1;
func_a($var);
# $var is still 1 here!!!
?>
The second example works as intended:
<?php
function & func_b ()
{
$some_var = 2;
return $some_var;
}
function func_a (& $param)
{
# $param is 1 here
$param = func_b();
# $param is 2 here
}
$var = 1;
func_a($var);
# $var is 2 here as intended
?>
(Experienced with PHP 4.3.0)
php at thunder-2000 dot com ¶
17 years ago
If you want to get a part of an array to manipulate, you can use this function
function &getArrayField(&$array,$path) {
if (!empty($path)) {
if (empty($array[$path[0]])) return NULL;
else return getArrayField($array[$path[0]], array_slice($path, 1));
} else {
return $array;
}
}
Use it like this:
$partArray =& getArrayField($GLOBALS,array("config","modul1"));
You can manipulate $partArray and the changes are also made with $GLOBALS.
Anonymous ¶
10 years ago
I learned a painful lesson working with a class method that would pass by reference.
In short, if you have a method in a class that is initialed with ampersand during declaration, do not use another ampersand when using the method as in &$this->method();
For example
<?php
class A {
public function &hello(){
static $a='';
return $a;
}
public function bello(){
$b=&$this->hello(); // incorrect. Do not use ampersand.
$b=$this->hello(); // $b is a reference to the static variable.
}
?>
contact at infopol dot fr ¶
20 years ago
A note about returning references embedded in non-reference arrays :
<?
$foo;
function bar () {
global $foo;
$return = array();
$return[] =& $foo;
return $return;
}
$foo = 1;
$foobar = bar();
$foobar[0] = 2;
echo $foo;
?>
results in "2" because the reference is copied (pretty neat).
willem at designhulp dot nl ¶
19 years ago
There is an important difference between php5 and php4 with references.
Lets say you have a class with a method called 'get_instance' to get a reference to an exsisting class and it's properties.
<?php
class mysql {
function get_instance(){
// check if object exsists
if(empty($_ENV['instances']['mysql'])){
// no object yet, create an object
$_ENV['instances']['mysql'] = new mysql;
}
// return reference to object
$ref = &$_ENV['instances']['mysql'];
return $ref;
}
}
?>
Now to get the exsisting object you can use
mysql::get_instance();
Though this works in php4 and in php5, but in php4 all data will be lost as if it is a new object while in php5 all properties in the object remain.
jpenna ¶
4 years ago
You can set the value of the variable returned by reference, be it a `static` function variable or a `private` property of an object (which is quite dangerous o.o).
Static function variable:
<?php
function &func(){
static $static = 0;
return $static;
}
$var1 =& func();
echo "var1:", $var1, "\n"; // 0
func();
$var1 = 90;
echo "var1:", $var1, "\n"; // 90
echo "static:", func(), "\n"; // 90
?>
Private property
<?php
class foo {
private $value = 1;
public function &getValue() {
return $this->value;
}
public function setValue($val) {
$this->value = $val;
}
}
$obj = new foo;
$myValue = &$obj->getValue(); // $myValue is a reference to $obj->value, which is 1.
echo $obj->getValue(); // 1
echo $myValue; // 1
$obj->setValue(5);
echo $obj->getValue(); // 5
echo $myValue; // 5
$myValue = 1000;
echo $obj->getValue(); // 1000
echo $myValue; // 1000
?>
pixel at minikomp dot com ¶
16 years ago
<?php
function &func(){
static $static = 0;
$static++;
return $static;
}
$var =& func();
echo $var; // 1
func();
func();
func();
func();
echo $var; // 5
?>
