When updating a Mysql table with identical values nothing's really affected so rowCount will return 0. As Mr. Perl below noted this is not always preferred behaviour and you can change it yourself since PHP 5.3.
Just create your PDO object with
<? php
$p = new PDO($dsn, $u, $p, array(PDO::MYSQL_ATTR_FOUND_ROWS => true));
?>
and rowCount() will tell you how many rows your update-query actually found/matched.
PDOStatement::rowCount
(PHP 5 >= 5.1.0, PHP 7, PHP 8, PECL pdo >= 0.1.0)
PDOStatement::rowCount — Returns the number of rows affected by the last SQL statement
Descrizione
PDOStatement::rowCount() returns the number of
rows affected by the last DELETE, INSERT, or UPDATE statement
executed by the corresponding PDOStatement object.
For statements that produce result sets, such as SELECT,
the behavior is undefined and can be different for each driver.
Some databases may return the number of rows produced by that statement
(e.g. MySQL in buffered mode), but this
behaviour is not guaranteed for all databases and should not be relied
on for portable applications.
Nota:
This method returns "0" (zero) with the SQLite driver at all times, and with the PostgreSQL driver only when setting the
PDO::ATTR_CURSORstatement attribute toPDO::CURSOR_SCROLL.
Elenco dei parametri
Questa funzione non contiene parametri.
Valori restituiti
Returns the number of rows.
Errori/Eccezioni
Emits an error with level E_WARNING if the attribute PDO::ATTR_ERRMODE is set
to PDO::ERRMODE_WARNING.
Throws a PDOException if the attribute PDO::ATTR_ERRMODE
is set to PDO::ERRMODE_EXCEPTION.
Esempi
Example #1 Return the number of deleted rows
PDOStatement::rowCount() returns the number of rows affected by a DELETE, INSERT, or UPDATE statement.
<?php
/* Delete all rows from the FRUIT table */
$del = $dbh->prepare('DELETE FROM fruit');
$del->execute();
/* Return number of rows that were deleted */
print "Return number of rows that were deleted:\n";
$count = $del->rowCount();
print "Deleted $count rows.\n";
?>Il precedente esempio visualizzerà qualcosa simile a:
Return number of rows that were deleted: Deleted 9 rows.
Example #2 Counting rows returned by a SELECT statement
For most databases, PDOStatement::rowCount() does not return the number of rows affected by a SELECT statement. Instead, use PDO::query() to issue a SELECT COUNT(*) statement with the same predicates as your intended SELECT statement, then use PDOStatement::fetchColumn() to retrieve the number of matching rows.
<?php
$sql = "SELECT COUNT(*) FROM fruit WHERE calories > 100";
$res = $conn->query($sql);
$count = $res->fetchColumn();
print "There are " . $count . " matching records.";Il precedente esempio visualizzerà qualcosa simile a:
There are 2 matching records.
Vedere anche:
- PDOStatement::columnCount() - Returns the number of columns in the result set
- PDOStatement::fetchColumn() - Returns a single column from the next row of a result set
- PDO::query() - Prepares and executes an SQL statement without placeholders
add a note
User Contributed Notes 15 notes
Ome Ko ¶
13 years ago
Matt ¶
17 years ago
Great, while using MySQL5, the only way to get the number of rows after doing a PDO SELECT query is to either execute a separate SELECT COUNT(*) query (or to do count($stmt->fetchAll()), which seems like a ridiculous waste of overhead and programming time.
Another gripe I have about PDO is its inability to get the value of output parameters from stored procedures in some DBMSs, such as SQL Server.
I'm not so sure I'm diggin' PDO yet.
Daniel Karp ¶
12 years ago
Note that an INSERT ... ON DUPLICATE KEY UPDATE statement is not an INSERT statement, rowCount won't return the number or rows inserted or updated for such a statement. For MySQL, it will return 1 if the row is inserted, and 2 if it is updated, but that may not apply to other databases.
leandro at marquesini dot com ¶
12 years ago
To display information only when the query is not empty, I do something like this:
<?php
$sql = 'SELECT model FROM cars';
$stmt = $db->prepare($sql);
$stmt->execute();
if ($data = $stmt->fetch()) {
do {
echo $data['model'] . '<br>';
} while ($data = $stmt->fetch());
} else {
echo 'Empty Query';
}
?>
gunnrosebutpeace at gmail dot com ¶
16 years ago
It'd better to use SQL_CALC_FOUND_ROWS, if you only use MySQL. It has many advantages as you could retrieve only part of result set (via LIMIT) but still get the total row count.
code:
<?php
$db = new PDO(DSN...);
$db->setAttribute(array(PDO::MYSQL_USE_BUFFERED_QUERY=>TRUE));
$rs = $db->query('SELECT SQL_CALC_FOUND_ROWS * FROM table LIMIT 5,15');
$rs1 = $db->query('SELECT FOUND_ROWS()');
$rowCount = (int) $rs1->fetchColumn();
?>
sERGE-01 ¶
11 years ago
In some drivers rowCount() only works when using the prepare() with PDO::CURSOR_SCROLL
So, you can modify PDO class:
<?php
class myPDO extends PDO
{
function query($query, $values=null)
{
if($query == "")
return false;
if($sth = $this->prepare($query, array(PDO::ATTR_CURSOR => PDO::CURSOR_SCROLL)))
{
$res = ($values) ? $sth->execute($values) : $sth->execute();
if(!$res)
return false;
}
return $sth;
}
}
?>
Now let's test (i using php 5.2.9-2):
<?php
function TestRowCount($dsn, $db_user, $db_pass)
{
$pdh = new PDO($dsn, $db_user, $db_pass);
$sth = $pdh->query("SELECT * FROM sys.tables");
print "rowCount() Standart: ".$sth->rowCount()."<br>";
$pdh = new myPDO($dsn, $db_user, $db_pass);
$sth = $pdh->query("SELECT * FROM sys.tables");
print "rowCount() New: ".$sth->rowCount()."<br><br>";
$pdh=null;
}
$db_server = "xxx";
$db_name = "xxx";
$db_user = "xxx";
$db_pass = "xxx";
print "PDO_MSSQL"."<br>";
TestRowCount("mssql:host=$db_server;dbname=$db_name", $db_user, $db_pass);
print "MSSQL throw PDO_ODBC"."<br>";
TestRowCount("odbc:DRIVER={SQL Server};SERVER=$db_server;DATABASE=$db_name;", $db_user, $db_pass);
print "MS SQL driver 2.0"."<br>";
TestRowCount("sqlsrv:server=$db_server;Database=$db_name", $db_user, $db_pass);
?>
My results:
-------------------
PDO_MSSQL
rowCount() Standart: 0
rowCount() New: 0
MSSQL throw PDO_ODBC
rowCount() Standart: -1
rowCount() New: 53
MS SQL driver 2.0
rowCount() Standart: -1
rowCount() New: 53
-------------------
With myPDO class you can use prepared queries like:
<?php
$pdh = new myPDO($dsn, $db_user, $db_pass);
$sth = $pdh->query("select * from data where id>? or name like ?", array(100, "A%"));
?>
user at nospam dot example dot com ¶
11 years ago
MySQL does not seem to return anything in rowCount for a select statement, but you can easily and efficiently get the row count as follows:
class db extends PDO {
public function last_row_count() {
return $this->query("SELECT FOUND_ROWS()")->fetchColumn();
}
}
$myDb = new db('mysql:host=myhost;dbname=mydb', 'login', 'password' );
Then, after running your query:
if ( $myDb->last_row_count() == 0 ) {
echo "Do something!";
}
xmt at abv dot bg ¶
6 years ago
Note:
=====
On Mysql SELECT statement with Buffered queries, rowCount will return the correct count of the items in the result set.
BUT if your query is unbuffered, than it will return 0. No matter if all the rows are retrieved from the result set or not (while in mysqli this behaviour is different - you will still get the number of items in the result set with unbuffered queries, but only when you retrieve all the rows from the set).
Example:
========
$conn = new PDO("mysql:host=127.0.0.1;dbname=db", 'root', 'root');
// use unbuffered query
$conn->setAttribute(PDO::MYSQL_ATTR_USE_BUFFERED_QUERY, false);
$stmt = $conn->query("select * from towns");
echo $stmt->rowCount(); // will always return 0
info at buylikesandviews dot com ¶
9 years ago
every good work
If you use "INSERT INTO ... ON DUPLICATE KEY UPDATE" syntax, mysql_affected_rows() will return you 2 if the UPDATE was made (just as it does with the "REPLACE INTO" syntax) and 1 if the INSERT was.
So if you use one SQL request to insert several rows at a time, and some are inserted, some are just updated, you won't get the real count..
bohwaz ¶
5 years ago
Please note another interesting behavior with PostgreSQL.
If you try to use rowCount() after a statement has been prepared using the PDO::ATTR_CURSOR set to PDO::CURSOR_SCROLL you will always get zero (0).
That's because PG doesn't have any way to tell how many rows are in the cursor until it did iterate through all rows.
<?php
$st = $pdo->prepare('SELECT NOW();', [PDO::ATTR_CURSOR => PDO::CURSOR_SCROLL]);
$st->execute();
var_dump($st->rowCount());
?>
Will return "0", whereas the same statement without the CURSOR_SCROLL attribute, will correctly return 1.
Please see this bug report https://bugs.php.net/bug.php?id=77855 for details.
This documentation should be updated shortly to reflect that issue.
lsrzj at facebook ¶
8 years ago
Well, I woundn't do as suggested querying twice the database to get the count and then get the data I want. It would be simpler and would give better performance to query once and retrieve both, record count and the data itself
<?php
$sql = "SELECT * FROM fruit WHERE calories > :calories";
$sth = $conn->prepare($sql);
$sth->bindParam(':calories', 100, PDO::PARAM_INT);
$res = $sth->execute();
if ($res) {
$record = $sth->fetchAll();
/* Check the number of rows that match the SELECT statement */
if (count($record) > 0) {
foreach ($record as $row) {
print "Name: " . $row['NAME'] . "\n";
}
}
/* No rows matched -- do something else */
else {
print "No rows matched the query.";
}
}
$conn = null;
?>
e dot sand at elisand dot com ¶
15 years ago
As of SQLite 3.x, the SQLite API itself changed and now all queries are implemented using "statements". Because of this, there is no way for PDO to know the rowCount of a SELECT result because the SQLite API itself doesn't offer this ability.
As a workaround, I created my own rowCount() function - it's a bit of a hack and hasn't been fully tested yet (I don't know how it will work when using JOINs in SELECTs, etc...), but at least alleviates the necessity for SELECT COUNT(*)'s everywhere in your code.
I would have preferred if it were possible to overload the rowCount() function from PDOStatement, but I don't think it's possible (or I don't know how to do it). There's also potential room for a bit more security ensuring that $queryString is wiped clean after other query()s so that you don't get a bad result, etc...
The actual code should be posted in the above/below post (max post limits, argh!). If others wish to extend/perfect this method, please keep me posted with an email as to what you've done.
@rhavendc (twitter) ¶
8 years ago
We're having problem with these PDOStatement::fetchColumn() and PDOStatement::rowCount(). I don't know if we have alike case to others or this is just a problem in our coding. In local, the rowCount() is not giving the correct number of rows but it is working fine when uploaded to our hosting site.. while the fetchColumn() is the reverse. The fetchColumn() is working fine in local but not anymore when uploaded. I don't know what is really going on with that but I think rowCount() is the best and the others are optional to use.
phpnet at maya-control dot ro ¶
10 years ago
Yet another workaround to return the row count inside only ONE select (see limitations below!):
$sth = $dbh->prepare("SELECT *,count(*) AS howmany FROM users WHERE email=:email and password=:pass"); #var placeholders
$sth->execute(array(':email'=>$email, ':pass'=>$pass)); #var binding
$row = $sth->fetch(); #get one row (it'll always be one and only one!!!)
if ($row['howmany'] == 1){ #we have a match and only one! cool!
echo $row['email'], $row['name'], $row['phone'], ... ;
} elseif ($row['howmany']>1) { #more than one row returned
#one programmer should be fired 'cause he's not checking for
#for existing emails, before creating a new user
...
# treat this exception somehow or simply skip this branch,
# if you're sure it won't happen in your table
} else { #no match in the table ($row['howmany'] == 0)
echo "Email/pass didn't match the ones in the database!";
}
Advantages:
- only one select statement is executed, no two steps needed!
- it checks if one row exists in the table or not, according to the WHERE clause.
- it returns all (or only a selection of) fields for that one row, if exists.
Disadvantages:
- it doesn't return row fields reliable if more than one row found. If more than one row responds to the SELECT query, the query returns still only one row and you don't know which one exactly .
Maybe using a SORT BY, would make it a bit more predictible (as in: "if more than one users found, return the last user added in the table") but it's more a matter of good design of the program that fills in the table initially.
Uses:
- It is perfect for checking if a user/pass pair is present in a users table and to return the other fields of the user (like name, phone, whatever) if user was found.
e dot sand at elisand dot com ¶
15 years ago
My rowCount() workaround & how it's used:
<?php
class MyPDO extends PDO {
private $queryString;
public function query(/* ... */) {
$args = func_get_args();
$this->queryString = func_get_arg(0);
return call_user_func_array(array(&$this, 'parent::query'), $args);
}
public function rowCount() {
$regex = '/^SELECT\s+(?:ALL\s+|DISTINCT\s+)?(?:.*?)\s+FROM\s+(.*)$/i';
if (preg_match($regex, $this->queryString, $output) > 0) {
$stmt = parent::query("SELECT COUNT(*) FROM {$output[1]}", PDO::FETCH_NUM);
return $stmt->fetchColumn();
}
return false;
}
}
$pdo = new MyPDO("sqlite::memory:");
$result = $pdo->query("SELECT row1, row2 FROM table WHERE something = 5");
if ($pdo->rowCount() > 0) {
echo "{$result['row1']}, {$result['row2']}";
}
?>
