Hello PHP World After many Hours of worryness :=)
I have found the Solution for Resume or Pause Uploads
In this Code Snippet it is the Server Side not Client on any Desktop Programm you must use byte ranges to calculate the uploaded bytes and missing of total bytes.
Here the PHP Code
<?php
$CHUNK = 8192;
try {
if (!($putData = fopen("php://input", "r")))
throw new Exception("Can't get PUT data.");
// now the params can be used like any other variable
// see below after input has finished
$tot_write = 0;
$tmpFileName = "/var/dev/tmp/PUT_FILE";
// Create a temp file
if (!is_file($tmpFileName)) {
fclose(fopen($tmpFileName, "x")); //create the file and close it
// Open the file for writing
if (!($fp = fopen($tmpFileName, "w")))
throw new Exception("Can't write to tmp file");
// Read the data a chunk at a time and write to the file
while ($data = fread($putData, $CHUNK)) {
$chunk_read = strlen($data);
if (($block_write = fwrite($fp, $data)) != $chunk_read)
throw new Exception("Can't write more to tmp file");
$tot_write += $block_write;
}
if (!fclose($fp))
throw new Exception("Can't close tmp file");
unset($putData);
} else {
// Open the file for writing
if (!($fp = fopen($tmpFileName, "a")))
throw new Exception("Can't write to tmp file");
// Read the data a chunk at a time and write to the file
while ($data = fread($putData, $CHUNK)) {
$chunk_read = strlen($data);
if (($block_write = fwrite($fp, $data)) != $chunk_read)
throw new Exception("Can't write more to tmp file");
$tot_write += $block_write;
}
if (!fclose($fp))
throw new Exception("Can't close tmp file");
unset($putData);
}
// Check file length and MD5
if ($tot_write != $file_size)
throw new Exception("Wrong file size");
$md5_arr = explode(' ', exec("md5sum $tmpFileName"));
$md5 = $md5sum_arr[0];
if ($md5 != $md5sum)
throw new Exception("Wrong md5");
} catch (Exception $e) {
echo '', $e->getMessage(), "\n";
}
?>
PUT メソッドのサポート
PHP は、クライアントがサーバーにファイルを保存するための HTTP PUT メソッドのサポートを提供します。 PUT リクエストは POST リクエストによるファイルアップロードよりもシンプルであり、 次のような形になります。
PUT /path/filename.html HTTP/1.1
これは、通常、リモートクライアントが /path/filename.html
が指す内容を Web ツリーに保存したいことを意味します。 Apache または PHP に
おいて全ての人が Web ツリー上の任意のファイルを自動的に上書きできる
ようにするというのは明らかに良い発想ではありません。よって、このような
リクエストを処理する際には、まずそのリクエストを処理する特定の
PHP スクリプトが必要なことを web サーバーに通知する必要があります。
Apache においては、Script ディレクティブにより
これを行うことができます。これは、Apache 設定ファイルのほぼ任意の
場所に置くことができます。一般的なのは、<Directory>
ブロックまたは <VirtualHost> ブロックの中です。次のように指定します。
Script PUT /put.php
これにより、この行を指定したコンテキストにマッチする URI を有する すべての PUT リクエストが put.php スクリプトに送られるよう Apache に 指定します。 もちろん、拡張子 .php により PHP が実行されるよう設定され、 PHP がアクティブであることが必要です。 このスクリプトに対するすべての PUT リクエストの対象リソースは、 スクリプト自身とします。アップロードされるファイルのファイル名ではありません。
PHP では、put.php の中で以下のようなことを行います。 これは、アップロードされたファイルをサーバー上のファイル myputfile.ext にコピーします。 ファイルコピーを行う前には、 何らかの確認やユーザー認証を行いたくなるかもしれません。
例1 HTTP PUT されたファイルの保存
<?php
/* PUT されたデータは標準入力からやってきます */
$putdata = fopen("php://input", "r");
/* 書き込みモードでファイルをオープンします */
$fp = fopen("myputfile.ext", "w");
/* データを 1 KB 単位で読み込み、
ファイルに書き込みます */
while ($data = fread($putdata, 1024))
fwrite($fp, $data);
/* ストリームを閉じます */
fclose($fp);
fclose($putdata);
?>
add a note
User Contributed Notes 10 notes
micronix at gmx dot net ¶
14 years ago
arnaud at caramia dot Fr ¶
1 year ago
We resolved our problem with https://pecl.php.net/package/apfd.
It parses multipart/form-data body (files and payload) with PUT and PATCH http requests, witch was only possible before with POST http request.
San ¶
10 years ago
Instead of using fread fwrite to save uploaded content to a file.
stream_copy_to_stream is much cleaner.
Oscar Fernandez Sierra ¶
2 years ago
This is what worked for me. There are many examples in the web that don't work. I found in https://lornajane.net/posts/2009/putting-data-fields-with-php-curl.
IMPORTANT: You should not use the code
curl_setopt($ch, CURLOPT_PUT, true);
even if it seems to be the right option (it would be the right option for a POST request, with CURLOPT_POST, but it does not work for a PUT request).
Notice that the constant CURLOPT_CUSTOMREQUEST is used instead of CURLOPT_PUT, and that the value used is "PUT" instead of true.
<?php
$url = "....."; // put your URL here
$data = array("a" => $a);
$ch = curl_init($url);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_CUSTOMREQUEST, "PUT");
curl_setopt($ch, CURLOPT_POSTFIELDS, http_build_query($data));
$response = curl_exec($ch);
if ( ! $response) {
return false;
}
polygon dot co dot in at gmail dot com ¶
1 year ago
I was confused with file uploads using the PUT method.
My concern was why can't we upload multiple files using the PUT method with streams
PUT data comes in on the stdin stream
$putdata = fopen("php://input", "r");
Note the $putdata is a file pointer to the file content that is being uploaded.
The data is received on the server on the fly (which means available as it is received)
Secondly, when we are using parse_str(file_get_contents("php://input")).
This means the data is completely received on the server end and is then made available to the script.
When using fopen() one cant parse the data. This can be used when uploading a large file.
The file may range from 100's of MBs to Gigs where streams plays a major role.
Streams make the file data available to script in chunks instead of first saving in the temp folder.
Hence, when using $putdata = fopen("php://input", "r"); one can't pass the payload as well.
If someone wants to pass the payload the only option is in the URL query string.
willy at kochkonsult dot no ¶
2 years ago
All the example code I found for using PUT with PHP always used a default hard-coded file extension for the incoming stream.
The filename from the incoming file PUT request can't be found anywhere from the incoming request (at least I couldn't find it) but mimetype can be found in the $_SERVER global variable.
I used this code to get the correct file extension:
$mimeType = $_SERVER['HTTP_CONTENT_TYPE'];
if ($mimeType!='application/pdf')
{
header('HTTP/1.1 405 Only PDF files allowed');
echo("Only PDF files are allowed for upload - this file is ".$mimeType);
die();
}
else $fileExtension = 'pdf';
If you have an Apache Tika server available, that would be the best option to analyze the file content to get the mimetype, but that might not be in scope for everyone :-)
yaogzhan at gmail dot com ¶
18 years ago
PUT raw data comes in php://input, and you have to use fopen() and fread() to get the content. file_get_contents() is useless.
The HTTP PUT request MUST contain a Content-Length header to specify the length (in bytes) of the body, or the server will not be able to know when the input stream is over. This is the common problem for many to find the php://input empty if no such header available.
This should make PUT work properly on win32 using PHP5.1.1 and apache2.
gherson ¶
19 years ago
A Case Study: To set up publishing with Netscape 7.2 Composer to Apache/PHP, no need to use CGI (which I tried unsuccessfully for too long) or to alter Apache's httpd.conf. I needed only to click Publish As, fill in put2disk.php as the filename (where its contents are the below), and fill in that file's dir as the "Publishing address".
XAMPP 1.4.14: Apache/2.0.54 (Win32) mod_ssl/2.0.54 OpenSSL/0.9.7g PHP/5.0.4.
<? // filename: put2disk.php.
//file_put_contents ("get_def.out", print_r (get_defined_vars(), TRUE)); // debugging
// Two slurp methods: (a) didn't work, (b) did.
//$stdin_rsc = fopen("php://input", "r");
//$putdata='';
//while ($putdata .= fread($stdin_rsc, 1024)); // a. Hangs the "Publishing..." dialog.
//while (!feof($stdin_rsc)) $putdata.=fread($stdin_rsc, 8192); // b. Worked, but file_get_contents is faster.
//fclose($stdin_rsc);
// All that's nec:
$putdata=file_get_contents('php://input'); // Not php://stdin! (When the ability to see error messages isn't available, the doc (this manual page) needs to be more accurate.)
file_put_contents("stdin.out",$putdata);
?>
warhog at warhog dot net ¶
19 years ago
NOTE: The <Script>-Directive can not be placed in .htaccess files.
So if you're having shared webspace and no access to the apache-configuration file you will have little chance to make something like this work.
But you can solve the problem, using mod_rewrite (for Apache) - for further information see the documentation at http://httpd.apache.org/docs/2.0/mod/mod_rewrite.html
mikeb at mikebanahan dot com ¶
21 years ago
I have spent a lot of time trying to make PUT work with Apache 2.0.40. I have not yet been able to find any way of making the Script directive invoke php via mod_php, the only way has been to have a file called example.cgi and invoke it via CGI, with the file starting
#!/usr/bin/php
so the PHP interpreter is invoked through the CGI mechanism and not as a module.
If there IS a way of making it work 'right' I'd love to know! After six hours of messing around, I've settled for CGI. The error messages in the apache error log are significantly misleading and the whole thing has been an exercise in frustration.
Attempts to use AddHandler and all 'normal' ways of trying to persuade Apache to do this have been fruitless. It does seem as if PUT can only be handled by CGI invocation.
