Whilst it was correct 11 years ago, the statement of Dan D is not so correct any moreю Anonymous functions are now objects of a class Closure and are safely collected by garbage collector.
create_function
(PHP 4 >= 4.0.1, PHP 5, PHP 7)
create_function — 文字列のコードを評価し、動的に関数を作成する
警告
この関数は PHP 7.2.0 で 非推奨 になり、PHP 8.0.0 で 削除 されました。この関数に頼らないことを強く推奨します。
説明
指定したパラメータにより動的に関数を作成し、その関数のユニークな名前を返します。
パラメータ
通常、argsには、シングルクオートで括った文字列 を
指定することが推奨されます。
ダブルクオート を使用した場合には、\$somevarのように変数名を
注意深くエスケープする必要があります。
-
args -
関数の引数を、カンマ区切りの文字列で指定します。
-
code -
関数のコード。
戻り値
一意な関数名を表す文字列を返します。
失敗した場合に false を返します。
返される名前には、
印字できない文字("\0")
が含まれているので注意して下さい。
よって、この名前を出力したり、
他の文字列に組み込む場合は特別な注意を払うべきです。
例
例1 create_function() や無名関数を使い、動的に関数を作成する
(たとえば) 実行時に取得した情報をもとにして関数を作成するために、動的に作成した関数が使えます。まず create_function() を使ってみます:
<?php
$newfunc = create_function('$a,$b', 'return "ln($a) + ln($b) = " . log($a * $b);');
echo $newfunc(2, M_E) . "\n";
?>同じコードは、無名関数 でも実現できます。コードや引数は、文字列に含まれていない点に注意して下さい:
<?php
$newfunc = function($a,$b) { return "ln($a) + ln($b) = " . log($a * $b); };
echo $newfunc(2, M_E) . "\n";
?>上の例の出力は以下となります。
ln(2) + ln(2.718281828459) = 1.6931471805599
例2 create_function() や無名関数を使い、一般的な処理を行う関数を作成する
もしくは、パラメータリストに一連の処理を行うことができる 一般的なハンドラ関数を定義できます:
<?php
function process($var1, $var2, $farr)
{
foreach ($farr as $f) {
echo $f($var1, $var2) . "\n";
}
}
// 数学関数群を作成します
$farr = array(
create_function('$x,$y', 'return "some trig: ".(sin($x) + $x*cos($y));'),
create_function('$x,$y', 'return "a hypotenuse: ".sqrt($x*$x + $y*$y);'),
create_function('$a,$b', 'if ($a >=0) {return "b*a^2 = ".$b*sqrt($a);} else {return false;}'),
create_function('$a,$b', "return \"min(b^2+a, a^2,b) = \".min(\$a*\$a+\$b,\$b*\$b+\$a);"),
create_function('$a,$b', 'if ($a > 0 && $b != 0) {return "ln(a)/b = ".log($a)/$b; } else { return false; }')
);
echo "\nUsing the first array of dynamic functions\n";
echo "parameters: 2.3445, M_PI\n";
process(2.3445, M_PI, $farr);
// 文字列処理関数群を作成します
$garr = array(
create_function('$b,$a', 'if (strncmp($a, $b, 3) == 0) return "** \"$a\" '.
'and \"$b\"\n** Look the same to me! (looking at the first 3 chars)";'),
create_function('$a,$b', 'return "CRCs: " . crc32($a) . ", ".crc32($b);'),
create_function('$a,$b', 'return "similar(a,b) = " . similar_text($a, $b, $p) . "($p%)";')
);
echo "\nUsing the second array of dynamic functions\n";
process("Twas brilling and the slithy toves", "Twas the night", $garr);
?>ここでも、 同じことが 無名関数 で実現できます。 変数名をエスケープする必要がないことに注意して下さい。 なぜなら、文字列に埋め込まれていないからです。
<?php
function process($var1, $var2, $farr)
{
foreach ($farr as $f) {
echo $f($var1, $var2) . "\n";
}
}
// 数学関数群を作成します
$farr = array(
function($x,$y) { return "some trig: ".(sin($x) + $x*cos($y)); },
function($x,$y) { return "a hypotenuse: ".sqrt($x*$x + $y*$y); },
function($a,$b) { if ($a >=0) {return "b*a^2 = ".$b*sqrt($a);} else {return false;} },
function($a,$b) { return "min(b^2+a, a^2,b) = " . min($a*$a+$b, $b*$b+$a); },
function($a,$b) { if ($a > 0 && $b != 0) {return "ln(a)/b = ".log($a)/$b; } else { return false; } }
);
echo "\nUsing the first array of dynamic functions\n";
echo "parameters: 2.3445, M_PI\n";
process(2.3445, M_PI, $farr);
// 文字列処理関数群を作成します
$garr = array(
function($b,$a) { if (strncmp($a, $b, 3) == 0) return "** \"$a\" " .
"and \"$b\"\n** Look the same to me! (looking at the first 3 chars)"; },
function($a,$b) { return "CRCs: " . crc32($a) . ", ".crc32($b); },
function($a,$b) { return "similar(a,b) = " . similar_text($a, $b, $p) . "($p%)"; }
);
echo "\nUsing the second array of dynamic functions\n";
process("Twas brilling and the slithy toves", "Twas the night", $garr);
?>上の例の出力は以下となります。
Using the first array of dynamic functions parameters: 2.3445, M_PI some trig: -1.6291725057799 a hypotenuse: 3.9199852871011 b*a^2 = 4.8103313314525 min(b^2+a, a^2,b) = 8.6382729035898 ln(a)/b = 0.27122299212594 Using the second array of dynamic functions ** "Twas the night" and "Twas brilling and the slithy toves" ** Look the same to me! (looking at the first 3 chars) CRCs: 3569586014, 342550513 similar(a,b) = 11(45.833333333333%)
例3 動的な関数をコールバック関数として使う
おそらく、動的な関数のもっとも一般的な用途は、コールバックに渡すことでしょう。 たとえば array_walk() あるいは usort() などで使用します。
<?php
$av = array("the ", "a ", "that ", "this ");
array_walk($av, create_function('&$v,$k', '$v = $v . "mango";'));
print_r($av);
?>無名関数 を使うと、下記のようになります:
<?php
$av = array("the ", "a ", "that ", "this ");
array_walk($av, function(&$v,$k) { $v = $v . "mango"; });
print_r($av);
?>上の例の出力は以下となります。
Array ( [0] => the mango [1] => a mango [2] => that mango [3] => this mango )
create_function() を使い、文字列を長いものから短いものに並べます:
<?php
$sv = array("small", "a big string", "larger", "it is a string thing");
echo "Original:\n";
print_r($sv);
echo "Sorted:\n";
usort($sv, create_function('$a,$b','return strlen($b) - strlen($a);'));
print_r($sv);
?>無名関数 を使うと、下記のようになります:
<?php
$sv = array("small", "a big string", "larger", "it is a string thing");
echo "Original:\n";
print_r($sv);
echo "Sorted:\n";
usort($sv, function($a,$b) { return strlen($b) - strlen($a); });
print_r($sv);
?>上の例の出力は以下となります。
Original: Array ( [0] => small [1] => a big string [2] => larger [3] => it is a string thing ) Sorted: Array ( [0] => it is a string thing [1] => a big string [2] => larger [3] => small )
add a note
User Contributed Notes 22 notes
tamagochi_man ¶
6 years ago
Dan D ¶
18 years ago
Beware when using anonymous functions in PHP as you would in languages like Python, Ruby, Lisp or Javascript. As was stated previously, the allocated memory is never released; they are not objects in PHP -- they are just dynamically named global functions -- so they don't have scope and are not subject to garbage collection.
So, if you're developing anything remotely reusable (OO or otherwise), I would avoid them like the plague. They're slow, inefficient and there's no telling if your implementation will end up in a large loop. Mine ended up in an iteration over ~1 million records and quickly exhasted my 500MB-per-process limit.
Josh J ¶
18 years ago
In regards to the recursion issue by info at adaniels dot nl
Anon function recursion by referencing the function variable in the correct scope.
<?php
$fn2 = create_function('$a', 'echo $a; if ($a < 10) call_user_func($GLOBALS["fn2"], ++$a);');
$fn2(1);
?>
kak dot serpom dot po dot yaitsam at gmail dot com ¶
12 years ago
Try this to boost performance of your scripts (increase maxCacheSize):
<?php
runkit_function_copy('create_function', 'create_function_native');
runkit_function_redefine('create_function', '$arg,$body', 'return __create_function($arg,$body);');
function __create_function($arg, $body) {
static $cache = array();
static $maxCacheSize = 64;
static $sorter;
if ($sorter === NULL) {
$sorter = function($a, $b) {
if ($a->hits == $b->hits) {
return 0;
}
return ($a->hits < $b->hits) ? 1 : -1;
};
}
$crc = crc32($arg . "\\x00" . $body);
if (isset($cache[$crc])) {
++$cache[$crc][1];
return $cache[$crc][0];
}
if (sizeof($cache) >= $maxCacheSize) {
uasort($cache, $sorter);
array_pop($cache);
}
$cache[$crc] = array($cb = eval('return function('.$arg.'){'.$body.'};'), 0);
return $cb;
}
?>
DB on music_ml at yahoo dot com dot ar ¶
21 years ago
[EDIT by danbrown AT php DOT net: Combined user-corrected post with previous (incorrect) post.]
You can't refer to a class variable from an anonymous function inside a class method using $this. Anonymous functions don't inherit the method scope. You'll have to do this:
<?php
class AnyClass {
var $classVar = 'some regular expression pattern';
function classMethod() {
$_anonymFunc = create_function( '$arg1, $arg2', 'if ( eregi($arg2, $arg1) ) { return true; } else { return false; } ' );
$willWork = $_anonymFunc('some string', $classVar);
}
}
?>
kkaiser at revolution-records dot net ¶
17 years ago
In the process of migrating a PHP4 codebase to PHP5, I ran into a peculiar problem. In the library, every class was derived from a generic class called 'class_container'. 'class_container' contained an array called runtime_functions and a method called class_function that was as follows:
<?php
function class_function($name,$params,$code) {
$this->runtime_functions[$name] = create_function($params,$code);
}
?>
In a subclass of class_container, there was a function that utilized class_function() to store some custom lambda functions that were self-referential:
<?php
function myfunc($name,$code) {
$this->class_function($name,'$theobj','$this=&$theobj;'.$code);
}
?>
In PHP4, this worked just fine. The idea was to write blocks of code at the subclass level, such as "echo $this->id;", then simply $MYOBJ->myfunc("go","echo $this->id;"); and later call it like $MYOBJ->runtime_functions["go"]();
It essentially worked exactly like binding anonymous functions to objects in Javascript.
Note how the "$this" keyword had to be manually redefined for the $code block to work.
In PHP5, however, you can't redeclare $this without getting a fatal error, so the code had to be updated to:
<?php
function myfunc($name,$code) {
$this->class_function($name,'$this',$code);
}
?>
Apparently create_function() allows you to set $this via a function argument, allowing you to bind anonymous functions to instantiated objects. Thought it might be useful to somebody.
info at adaniels dot nl ¶
18 years ago
Note that using __FUNCTION__ in a an anonymous function, will always result '__lambda_func'.
<?php
$fn = create_function('', 'echo __FUNCTION__;');
$fn();
// Result: __lambda_func
echo $fn;
// Result: ºlambda_2 (the actual first character cannot be displayed)
?>
This means that a anonymous function can't be used recursively. The following code (recursively counting to 10) results in an error:
<?php
$fn2 = create_function('$a', 'echo $a; if ($a < 10) call_user_func(__FUNCTION__, $a++);');
$fn2(1);
// Warning: call_user_func(__lambda_func) [function.call-user-func]: First argument is expected to be a valid callback in T:/test/test.php(21) : runtime-created function on line 1
?>
CertaiN ¶
11 years ago
Best wapper:
<?php
function create_lambda($args, $code) {
static $func;
if (!isset($func[$args][$code])) {
$func[$args][$code] = create_function($args, $code);
}
return $func[$args][$code];
}
Dave H ¶
13 years ago
The following function is very useful for creating an alias of a user function.
For built-in functions, it is less useful because default values are not available, so function aliases for built-in functions must have all parameters supplied, whether optional or not.
<?php
function create_function_alias($function_name, $alias_name)
{
if(function_exists($alias_name))
return false;
$rf = new ReflectionFunction($function_name);
$fproto = $alias_name.'(';
$fcall = $function_name.'(';
$need_comma = false;
foreach($rf->getParameters() as $param)
{
if($need_comma)
{
$fproto .= ',';
$fcall .= ',';
}
$fproto .= '$'.$param->getName();
$fcall .= '$'.$param->getName();
if($param->isOptional() && $param->isDefaultValueAvailable())
{
$val = $param->getDefaultValue();
if(is_string($val))
$val = "'$val'";
$fproto .= ' = '.$val;
}
$need_comma = true;
}
$fproto .= ')';
$fcall .= ')';
$f = "function $fproto".PHP_EOL;
$f .= '{return '.$fcall.';}';
eval($f);
return true;
}
?>
lombax85 at gmail dot com ¶
3 years ago
For who *really* needs the create_function() on php8 (because of legacy code that cannot be changed easily) there is this: "composer require lombax85/create_function".
neo at nowhere dot com ¶
16 years ago
In response to kkaiser at revolution-records dot net's note, even tho PHP will allow you to use
<?
$myfunc = create_function('$this', $code);
?>
You can NOT use a reference to "$this" inside of the anonymous function, as PHP will complain that you are using a reference to "$this" in a non-object context.
Currently, I have not found a work-around for this...
Alan FUNG ¶
16 years ago
$f = create_function('','echo "function defined by create_function";');
$f();
result:
function defined by create_function
You may define no return in function body while you are using create_function.
Rene Saarsoo ¶
16 years ago
Here has been some discussion about the "memory leak" create_function() can create.
What create_function() actually does, is creating an ordinary function with name chr(0).lambda_n where n is some number:
<?php
$f = create_function('', 'return 1;');
function lambda_1() { return 2; }
$g = "lambda_1";
echo $g(); // outputs: 2
$h = chr(0)."lambda_1";
echo $h(); // outputs: 1
?>
TSE-WebDesign ¶
17 years ago
Here's how to call a runtime-created function from another runtime-created function:
<?php
$get_func = create_function('$func', 'return substr($func,1);');
$get_value = create_function('$index','return pow($index,$index);');
$another_func = create_function('$a', '$func="\x00"."'.$get_func($get_value).'";return $func($a);');
echo $another_func(2); # result is 4
?>
Phlyst ¶
18 years ago
In reply to info at adaniels dot nl:
You may not be able to use __FUNCTION__ in a lambda (thanks for pointing it out; I was having that problem just now), but you can use $GLOBALS to work around it if you're assigning the function to a variable. I reimplemented array_walk_recursive() in PHP4 like this:
<?php
$array_walk_recursive = create_function('&$array, $callback',
'foreach($array as $element) {
if(is_array($element)) {
$funky = $GLOBALS["array_walk_recursive"];
$funky($element, $callback);
}
else {
$callback($element);
}
}');
?>
josh at janrain dot com ¶
18 years ago
Beware! This is merely a convenience function that generates a unique name for a regular function. It is *not* a closure or even an anonymous function. It is just a regular function that gets named for you.
Joshua E Cook ¶
18 years ago
Functions created by create_function() cannot return a value by reference. The function below creates a function that can. The arguments are the same as create_function(). Note that these arguments are passed, unmodified, to eval(), so be sure that data passed in is sanitized.
<?php
/**
* create_ref_function
* Create an anonymous (lambda-style) function
* which returns a reference
* see http://php.net/create_function
*/
function
create_ref_function( $args, $code )
{
static $n = 0;
$functionName = sprintf('ref_lambda_%d',++$n);
$declaration = sprintf('function &%s(%s) {%s}',$functionName,$args,$body);
eval($declaration);
return $functionName;
}
?>
boards at gmail dot com ¶
18 years ago
If you were checking to see if a function is made properly, this would be a better way of checking:
<?php
$fnc = @create_function('$arg1,$arg2,$arg3', 'return true;');
# make that function whatever you want
if (empty($fnc)) {
die('Could not create function $fnc.');
}
# although, the follow will NOT work
if (empty(create_function('$arg', 'return $arg;'))) {
die('Could not create anonymous function.');
}
# you would get an error regarding not being able to use a
# return value in writeable context (i.e. a return value is
# a const in C, and the function empty() doesn't use a
# const void* parameter
?>
MagicalTux at FF.ST ¶
20 years ago
neo at gothic-chat d0t de wrote :
Beware of memory-leaks, the garbage-collection seems to 'oversee' dynamically created functions!
Not really...
In fact, PHP can not "unassign" functions. So if you create a function, it won't be deleted until the end of the script, even if you unset the variable containing its name.
If you need to change a part of a function everytime you run a loop, think of a way to make a more general function or try using eval :) (functions are made to be re-used. If you need to run your own piece of code once, eval is much better).
neo at gothic-chat d0t de ¶
20 years ago
Beware of memory-leaks, the garbage-collection seems to 'oversee' dynamically created functions!
I used a function like this to replace special characters in links with their htmlentities:
<?php
$text = preg_replace_callback (
"/(<(frame src|a href|form action)=\")([^\"]+)(\"[^>]*>)/i",
create_function (
'$matches',
'return $matches[1] . htmlentities ($matches[3]) . $matches[4];'
),
$text);
?>
After 1000 calls, the process used about 5MB more than before. In my situation this boosted up the memory-size of one PHP-process up to over 100MB!
In such cases, better store the function in a global variable.
x-empt[a_t]ispep.cx ¶
23 years ago
Create_function enables the ability to change the scope of functions. You might have a class where it needs to define a GLOBAL function. This is possible, like:
<?php
class blah {
function blah() {
$z=create_function('$arg1string','return "function-z-".$arg1string;');
$GLOBALS['z']=$z;
}
}
$blah_object=new blah;
$result=$GLOBALS['z']('Argument 1 String');
echo $result;
?>
Making a function escape it's defined scope can be useful in many situations.
edgar at goodforall dot eu ¶
15 years ago
Just a little toy I thought up, I would like to share. Creates an anonymous function, which let you use a class as a function.
In php 5.3 there is support for real functors (trough __invoke):
<?php
function createFunctor($className){
$content = "
static \$class;
if(!\$class){
\$class = new $className;
}
return \$class->run(\$args);
";
$f = create_function('$args', $content);
return $f;
}
class test {
public function run($args){
print $args;
}
}
$test = createFunctor('test');
$test('hello world');
?>
