A class constant, class property (static), and class function (static) can all share the same name and be accessed using the double-colon.
<?php
class A {
public static $B = '1'; # Static class variable.
const B = '2'; # Class constant.
public static function B() { # Static class function.
return '3';
}
}
echo A::$B . A::B . A::B(); # Outputs: 123
?>
スコープ定義演算子 (::)
スコープ定義演算子 (またの名を Paamayim Nekudotayim)、 平たく言うと「ダブルコロン」は、トークンのひとつです。 定数 static プロパティ、 クラスの static メソッド、 や親クラスのそれにアクセスできます。 さらに、static メソッドやプロパティは 遅延静的束縛 (Late Static Bindings) 経由でオーバーライドできます。
これらの要素をクラス定義の外から参照する際には、 クラスの名前を使用してください。
変数を用いてクラスを参照することも可能です。
変数の値に (self や parent、
static といった)
キーワードを指定することはできません。
なぜダブルコロンに Paamayim Nekudotayim という名前をつけたのか、 ちょっと奇妙に感じられるかもしれません。 しかし、Zend Engine 0.5 (PHP 3のエンジン) を 書いている時に、Zend チームはこう呼ぶと決めたのです。 この奇妙な名前は、実はダブルコロンを意味するヘブライ語なのです!
例1 クラス定義の外からの ::
<?php
class MyClass {
const CONST_VALUE = 'A constant value';
}
$classname = 'MyClass';
echo $classname::CONST_VALUE;
echo MyClass::CONST_VALUE;
?>三つの特別なキーワード self と parentそして static がクラス定義の内部からプロパティまたはメソッドにアクセスする際に使用されます。
例2 クラス定義の中からの ::
<?php
class OtherClass extends MyClass
{
public static $my_static = 'static var';
public static function doubleColon() {
echo parent::CONST_VALUE . "\n";
echo self::$my_static . "\n";
}
}
$classname = 'OtherClass';
$classname::doubleColon();
OtherClass::doubleColon();
?>拡張されたクラスが親クラスのメソッドの定義をオーバーライドする際、 PHPは親クラスのメソッドをコールしません。 親クラスのメソッドをコールするかしないかは、 拡張されたクラスに責任があります。 これは、コンストラクタおよびデストラクタ, オーバーロード, そして マジック メソッドの定義にも 適用されます。
例3 親クラスのメソッドをコールする
<?php
class MyClass
{
protected function myFunc() {
echo "MyClass::myFunc()\n";
}
}
class OtherClass extends MyClass
{
// 親の定義をオーバーライドします
public function myFunc()
{
// それでも親の関数をコールできます
parent::myFunc();
echo "OtherClass::myFunc()\n";
}
}
$class = new OtherClass();
$class->myFunc();
?>staticメソッドとしてコールする場合の、トリックに関するサンプル も参照ください。
add a note
User Contributed Notes 11 notes
Theriault ¶
14 years ago
1naveengiri at gmail dot com ¶
7 years ago
In PHP, you use the self keyword to access static properties and methods.
The problem is that you can replace $this->method() with self::method() anywhere, regardless if method() is declared static or not. So which one should you use?
Consider this code:
class ParentClass {
function test() {
self::who(); // will output 'parent'
$this->who(); // will output 'child'
}
function who() {
echo 'parent';
}
}
class ChildClass extends ParentClass {
function who() {
echo 'child';
}
}
$obj = new ChildClass();
$obj->test();
In this example, self::who() will always output ‘parent’, while $this->who() will depend on what class the object has.
Now we can see that self refers to the class in which it is called, while $this refers to the class of the current object.
So, you should use self only when $this is not available, or when you don’t want to allow descendant classes to overwrite the current method.
guy at syntheticwebapps dot com ¶
11 years ago
It seems as though you can use more than the class name to reference the static variables, constants, and static functions of a class definition from outside that class using the :: . The language appears to allow you to use the object itself.
For example:
class horse
{
static $props = {'order'=>'mammal'};
}
$animal = new horse();
echo $animal::$props['order'];
// yields 'mammal'
This does not appear to be documented but I see it as an important convenience in the language. I would like to see it documented and supported as valid.
If it weren't supported officially, the alternative would seem to be messy, something like this:
$animalClass = get_class($animal);
echo $animalClass::$props['order'];
jasverix at NOSPAM dot gmail dot com ¶
11 years ago
Just found out that using the class name may also work to call similar function of anchestor class.
<?php
class Anchestor {
public $Prefix = '';
private $_string = 'Bar';
public function Foo() {
return $this->Prefix.$this->_string;
}
}
class MyParent extends Anchestor {
public function Foo() {
$this->Prefix = null;
return parent::Foo().'Baz';
}
}
class Child extends MyParent {
public function Foo() {
$this->Prefix = 'Foo';
return Anchestor::Foo();
}
}
$c = new Child();
echo $c->Foo(); //return FooBar, because Prefix, as in Anchestor::Foo()
?>
The Child class calls at Anchestor::Foo(), and therefore MyParent::Foo() is never run.
giovanni at gargani dot it ¶
15 years ago
Well, a "swiss knife" couple of code lines to call parent method. The only limit is you can't use it with "by reference" parameters.
Main advantage you dont need to know the "actual" signature of your super class, you just need to know which arguments do you need
<?php
class someclass extends some superclass {
// usable for constructors
function __construct($ineedthisone) {
$args=func_get_args();
/* $args will contain any argument passed to __construct.
* Your formal argument doesnt influence the way func_get_args() works
*/
call_user_func_array(array('parent',__FUNCTION__),$args);
}
// but this is not for __construct only
function anyMethod() {
$args=func_get_args();
call_user_func_array(array('parent',__FUNCTION__),$args);
}
// Note: php 5.3.0 will even let you do
function anyMethod() {
//Needs php >=5.3.x
call_user_func_array(array('parent',__FUNCTION__),func_get_args());
}
}
?>
remy dot damour at ----no-spam---laposte dot net ¶
14 years ago
As of php 5.3.0, you can use 'static' as scope value as in below example (add flexibility to inheritance mechanism compared to 'self' keyword...)
<?php
class A {
const C = 'constA';
public function m() {
echo static::C;
}
}
class B extends A {
const C = 'constB';
}
$b = new B();
$b->m();
// output: constB
?>
gazianis2200 at gmail dot com ¶
10 months ago
<?php
/**
*access a constant from outside a class
*/
class Foo{
public const A = "Constant A";
}
echo Foo::A;
echo "\n";
/**
*access a constant within its own class
*/
class Bar{
public const A = "Constant A";
public function abc(){
echo self::A;
echo "\n";
}
}
$obj = new Bar;
$obj->abc();
/**
*access a constant within her child class
*/
class Baz extends Bar{
public function abc(){
echo parent::A;
}
}
$obj = new Baz;
$obj->abc();
//Static property and static method also follows this principle.
wouter at interpotential dot com ¶
15 years ago
It's worth noting, that the mentioned variable can also be an object instance. This appears to be the easiest way to refer to a static function as high in the inheritance hierarchy as possible, as seen from the instance. I've encountered some odd behavior while using static::something() inside a non-static method.
See the following example code:
<?php
class FooClass {
public function testSelf() {
return self::t();
}
public function testThis() {
return $this::t();
}
public static function t() {
return 'FooClass';
}
function __toString() {
return 'FooClass';
}
}
class BarClass extends FooClass {
public static function t() {
return 'BarClass';
}
}
$obj = new BarClass();
print_r(Array(
$obj->testSelf(), $obj->testThis(),
));
?>
which outputs:
<pre>
Array
(
[0] => FooClass
[1] => BarClass
)
</pre>
As you can see, __toString has no effect on any of this. Just in case you were wondering if perhaps this was the way it's done.
luka8088 at gmail dot com ¶
15 years ago
Little static trick to go around php strict standards ...
Function caller founds an object from which it was called, so that static method can alter it, replacement for $this in static function but without strict warnings :)
<?php
error_reporting(E_ALL + E_STRICT);
function caller () {
$backtrace = debug_backtrace();
$object = isset($backtrace[0]['object']) ? $backtrace[0]['object'] : null;
$k = 1;
while (isset($backtrace[$k]) && (!isset($backtrace[$k]['object']) || $object === $backtrace[$k]['object']))
$k++;
return isset($backtrace[$k]['object']) ? $backtrace[$k]['object'] : null;
}
class a {
public $data = 'Empty';
function set_data () {
b::set();
}
}
class b {
static function set () {
// $this->data = 'Data from B !';
// using this in static function throws a warning ...
caller()->data = 'Data from B !';
}
}
$a = new a();
$a->set_data();
echo $a->data;
?>
Outputs: Data from B !
No warnings or errors !
csaba dot dobai at php-sparcle dot com ¶
15 years ago
For the 'late static binding' topic I published a code below, that demonstrates a trick for how to setting variable value in the late class, and print that in the parent (or the parent's parent, etc.) class.
<?php
class cA
{
/**
* Test property for using direct default value
*/
protected static $item = 'Foo';
/**
* Test property for using indirect default value
*/
protected static $other = 'cA';
public static function method()
{
print self::$item."\r\n"; // It prints 'Foo' on everyway... :(
print self::$other."\r\n"; // We just think that, this one prints 'cA' only, but... :)
}
public static function setOther($val)
{
self::$other = $val; // Set a value in this scope.
}
}
class cB extends cA
{
/**
* Test property with redefined default value
*/
protected static $item = 'Bar';
public static function setOther($val)
{
self::$other = $val;
}
}
class cC extends cA
{
/**
* Test property with redefined default value
*/
protected static $item = 'Tango';
public static function method()
{
print self::$item."\r\n"; // It prints 'Foo' on everyway... :(
print self::$other."\r\n"; // We just think that, this one prints 'cA' only, but... :)
}
/**
* Now we drop redeclaring the setOther() method, use cA with 'self::' just for fun.
*/
}
class cD extends cA
{
/**
* Test property with redefined default value
*/
protected static $item = 'Foxtrot';
/**
* Now we drop redeclaring all methods to complete this issue.
*/
}
cB::setOther('cB'); // It's cB::method()!
cB::method(); // It's cA::method()!
cC::setOther('cC'); // It's cA::method()!
cC::method(); // It's cC::method()!
cD::setOther('cD'); // It's cA::method()!
cD::method(); // It's cA::method()!
/**
* Results: ->
* Foo
* cB
* Tango
* cC
* Foo
* cD
*
* What the hell?! :)
*/
?>
developit at mail dot ru ¶
18 years ago
You use 'self' to access this class, 'parent' - to access parent class, and what will you do to access a parent of the parent? Or to access the very root class of deep class hierarchy? The answer is to use classnames. That'll work just like 'parent'. Here's an example to explain what I mean. Following code
<?php
class A
{
protected $x = 'A';
public function f()
{
return '['.$this->x.']';
}
}
class B extends A
{
protected $x = 'B';
public function f()
{
return '{'.$this->x.'}';
}
}
class C extends B
{
protected $x = 'C';
public function f()
{
return '('.$this->x.')'.parent::f().B::f().A::f();
}
}
$a = new A();
$b = new B();
$c = new C();
print $a->f().'<br/>';
print $b->f().'<br/>';
print $c->f().'<br/>';
?>
will output
[A] -- {B} -- (C){C}{C}[C]
