Note that the add() and sub() methods will modify the value of the object you're calling the method on! This is very untypical for a method that returns a value of its own type. You could misunderstand it that the method would return a new instance with the modified value, but in fact it modifies itself! This is undocumented here. (Only a side note on procedural style mentions it, but it obviously does not apply to object oriented style.)
DateTime::add
date_add
(PHP 5 >= 5.3.0, PHP 7)
DateTime::add -- date_add — Adds an amount of days, months, years, hours, minutes and seconds to a DateTime object
인수
-
object -
Procedural style only: A DateTime object returned by date_create(). The function modifies this object.
-
interval -
A DateInterval object
반환값
메소드 체이닝을 위한 DateTime 객체를 반환합니다.실패 시 FALSE를 반환합니다.
예제
Example #1 DateTime::add() example
객체 기반 형식
<?php
$date = new DateTime('2000-01-01');
$date->add(new DateInterval('P10D'));
echo $date->format('Y-m-d') . "\n";
?>
절차식 형식
<?php
$date = date_create('2000-01-01');
date_add($date, date_interval_create_from_date_string('10 days'));
echo date_format($date, 'Y-m-d');
?>
위 예제들의 출력:
2000-01-11
Example #2 Further DateTime::add() examples
<?php
$date = new DateTime('2000-01-01');
$date->add(new DateInterval('PT10H30S'));
echo $date->format('Y-m-d H:i:s') . "\n";
$date = new DateTime('2000-01-01');
$date->add(new DateInterval('P7Y5M4DT4H3M2S'));
echo $date->format('Y-m-d H:i:s') . "\n";
?>
위 예제의 출력:
2000-01-01 10:00:30 2007-06-05 04:03:02
Example #3 Beware when adding months
<?php
$date = new DateTime('2000-12-31');
$interval = new DateInterval('P1M');
$date->add($interval);
echo $date->format('Y-m-d') . "\n";
$date->add($interval);
echo $date->format('Y-m-d') . "\n";
?>
위 예제의 출력:
2001-01-31 2001-03-03
주의
DateTime::modify() is an alternative when using PHP 5.2.
참고
- DateTime::sub() - Subtracts an amount of days, months, years, hours, minutes and seconds from a DateTime object
- DateTime::diff() - Returns the difference between two DateTime objects
- DateTime::modify() - Alters the timestamp
add a note
User Contributed Notes 12 notes
Anonymous ¶
13 years ago
Angelo ¶
9 years ago
Another simple solution to adding a month but not autocorrecting days to the next month is this.
(Also works for substracting months)
$dt = new DateTime("2016-01-31");
$oldDay = $dt->format("d");
$dt->add(new DateInterval("P1M")); // 2016-03-02
$newDay = $dt->format("d");
if($oldDay != $newDay) {
// Check if the day is changed, if so we skipped to the next month.
// Substract days to go back to the last day of previous month.
$dt->sub(new DateInterval("P" . $newDay . "D"));
}
echo $dt->format("Y-m-d"); // 2016-02-29
Hope this helps someone.
Anthony ¶
9 years ago
If you're using PHP >= 5.5, instead of using "glavic at gmail dot com"'s DateTimeEnhanced class, use the built in DateTimeImmutable type. When you call DateTimeImmutable::add() it will return a new object, rather than modifying the original
patrick dot mckay7 at gmail dot com ¶
10 years ago
Here is a solution to adding months when you want 2014-10-31 to become 2014-11-30 instead of 2014-12-01.
<?php
/**
* Class MyDateTime
*
* Extends DateTime to include a sensible addMonth method.
*
* This class provides a method that will increment the month, and
* if the day is greater than the last day in the new month, it
* changes the day to the last day of that month. For example,
* If you add one month to 2014-10-31 using DateTime::add, the
* result is 2014-12-01. Using MyDateTime::addMonth the result is
* 2014-11-30.
*/
class MyDateTime extends DateTime
{
public function addMonth($num = 1)
{
$date = $this->format('Y-n-j');
list($y, $m, $d) = explode('-', $date);
$m += $num;
while ($m > 12)
{
$m -= 12;
$y++;
}
$last_day = date('t', strtotime("$y-$m-1"));
if ($d > $last_day)
{
$d = $last_day;
}
$this->setDate($y, $m, $d);
}
}
?>
glavic at gmail dot com ¶
11 years ago
If you need add() and sub() that don't modify object values, you can create new methods like this:
<?php
class DateTimeEnhanced extends DateTime {
public function returnAdd(DateInterval $interval)
{
$dt = clone $this;
$dt->add($interval);
return $dt;
}
public function returnSub(DateInterval $interval)
{
$dt = clone $this;
$dt->sub($interval);
return $dt;
}
}
$interval = DateInterval::createfromdatestring('+1 day');
$dt = new DateTimeEnhanced; # initialize new object
echo $dt->format(DateTime::W3C) . "\n"; # 2013-09-12T15:01:44+02:00
$dt->add($interval); # this modifies the object values
echo $dt->format(DateTime::W3C) . "\n"; # 2013-09-13T15:01:44+02:00
$dtNew = $dt->returnAdd($interval); # this returns the new modified object and doesn't change original object
echo $dt->format(DateTime::W3C) . "\n"; # 2013-09-13T15:01:44+02:00
echo $dtNew->format(DateTime::W3C) . "\n"; # 2013-09-14T15:01:44+02:00
rnealxp at yahoo dot com ¶
7 years ago
What you can do with this function/method is a great example of the philosophy: "just because you can do it doesn't mean you should". I'm talking about two issues: (1) the number of days in the month which varies from months 1-12 as well as for month 2 which could be leap year (or not); and then issue (2): what if there is the need to specify a large quantity of an interval such that it needs to be re-characterized into broader-scoped intervals (i.e. 184 seconds ==> 3 minutes-4 seconds). Examples in notes elsewhere in the docs for this function illustrate both issues and their undesired effects so I won't focus on them further. But how did I decide to handle? I've gone with four "public" functions and a single "private" function, and without giving you a bunch of code to study, here are their summaries...
1. function adjustYear(int $yearsAdj){ //you can pass in +/- value and I adjust year value by that value but then I also call PHP's 'cal_days_in_month' function to ensure the day number I have in my date does not exceed days in the month for the new year/month combo--if it does, I adjust the day value downward.
2. function adjustMonth(int $monthsAdj){ //same notes as above apply; but also, I allow any number to be passed in for $monthsAdj. I use the 'int' function (int($monthsAdj/12)) and modulus % operator to determine how to adjust both year and month. And again, I use 'cal_days_in_month' function to tweak the day number as needed.
3. function addTime(int $days, int $hours, int $minutes, int $seconds){
// I use date_add and create a DateInterval object from the corresponding string spec (created from the args passed to this function). Note that months and years are excluded due to the bad side-effects already mentioned elsewhere.
4. function subtractTime(int $days, int $hours, int $minutes, int $seconds){
//notes for "addTime" also apply to this function but note that I like separate add and subtract functions because setting the DateInterval property flag to indicate add/subtract is not as intuitive for future coding.
5. function recharacterizeIntervals(int $days, int $hours, int $minutes, int $seconds){ // I convert excessively large quantities of any one interval into the next largest interval using the 'int' function and modulus (%) operator. I then use the result of this function when creating the string interval specification that gets passed when generating the DateInterval object for calling the date_add function (or object-method equivalent).
**Results/goals...
--any number of days/hours/minutes/seconds can be passed in to add/subtractTime and all of "Y/M/D/H/M/S" values get adjusted as you would expect.
--using adjustYear/Month lets you pass +/- values and only "Y/M" values get modified without having undesirable effects on day values.
--a call to the "recharacterize" function helps ensure proper and desired values are in the intervals prior to calling date_add to let it do its work.
artaxerxes2 at iname dot com ¶
11 years ago
Be careful that the internal timer to your DateTime object can be changed drastically when adding even 1 second, during the switch from DST to normal.
Consider the following:
<?php
$ts = 1383458399; /* 2013-11-03 01:59:59 in Eastern Saving Time */
$dst = DateTime::createFromFormat('U',$ts, new DateTimeZone('GMT')); /* timezone is ignored for a unix timestamp, but if we don't put it, php throws warnings */
$dst->setTimeZone(new DateTimeZone('EST5EDT')); /* a timezone effectuating the change */
$second = new DateInterval('PT1S'); /* one second */
echo $ts . "\t" . $dst->format("U\tY-m-d H:i:s T") . "\n";
$dst->add($second);
$ts++;
echo $ts . "\t" . $dst->format("U\tY-m-d H:i:s T") . "\n";
/* results:
1383458399 1383458399 2013-11-03 01:59:59 EDT
1383458400 1383462000 2013-11-03 02:00:00 EST
noticed how the second column went from 1383458399 to 1383462000 even though only 1 second was added?
*/
?>
skysnake ¶
3 years ago
$TodaySQL = substr(date(DATE_ISO8601 ),0,10)
$LastYearSQL = date('Y.m.d',strtotime("-1 years"))
$NextMonthEndSQL = date('Y.m.d',strtotime("+1 months"))
// handy little SQL date formats
//Today
2021-03-24
//Last year
2020.03.24
//Next month
2021.04.24
info at mobger dot de ¶
3 years ago
Remark, that calculations on date are not defined as bijective operations. The Summertime is integrated by mixing two concepts. You should test it beforehead.
Datetime will correct a date after each summation, if a date (29.2.2021 => 1.3.2021) or a datetime (29.3.2020 2:30 am (Europe/Berlin) => 29.3.2020 3:30 or 29.3.2020 1:30)
Example
<?php
$expectEaster = date_create_from_format('Y-m-d H:i:s', '2020-04-12 12:00:00', new DateTimeZone('Europe/Berlin'));
$interval = new DateInterval('PT20761M');
$expectEaster->sub($interval);
echo('recalc '.$expectEaster->format('Y-m-d H:i:s')."\n");
$expectEaster->add($interval);
echo('easter '.$expectEaster->format('Y-m-d H:i:s')."\n" );
$expectEaster = date_create_from_format('Y-m-d H:i:s', '2020-04-12 12:00:00', new DateTimeZone('Europe/Berlin'));
$interval = new DateInterval('PT20760M');
$expectEaster->sub($interval);
echo('recalc '.$expectEaster->format('Y-m-d H:i:s')."\n");
$expectEaster->add($interval);
echo('easter '.$expectEaster->format('Y-m-d H:i:s')."\n");
$expectEaster = date_create_from_format('Y-m-d H:i:s', '2020-04-12 12:00:00', new DateTimeZone('Europe/Berlin'));
$interval = new DateInterval('PT20701M');
$expectEaster->sub($interval);
echo('recalc '.$expectEaster->format('Y-m-d H:i:s')."\n");
$expectEaster->add($interval);
echo('easter '.$expectEaster->format('Y-m-d H:i:s')."\n");
$expectEaster = date_create_from_format('Y-m-d H:i:s', '2020-04-12 12:00:00', new DateTimeZone('Europe/Berlin'));
$interval = new DateInterval('PT20700M');
$expectEaster->sub($interval);
echo('recalc '.$expectEaster->format('Y-m-d H:i:s')."\n");
$expectEaster->add($interval);
echo('easter '.$expectEaster->format('Y-m-d H:i:s')."\n");
// Result
// recalc 2020-03-29 00:59:00 // reduce the missing hour before you calcuclate the datetime
// easter 2020-04-12 11:00:00 // recalcultate the date and remove the missing hour
// recalc 2020-03-29 03:00:00 //because 2020-03-29 3:00:00 [it means 2020-03-29 2:00:00] does not exist add 60 min)
// easter 2020-04-12 13:00:00
// recalc 2020-03-29 03:59:00 // -(12*60+(11+2)*1440+21*60) = -(20701 min) = = 29.3.2020 2:59(not exist => no-equivalent add of one hour) => 29.3.2020 3:59
// easter 2020-04-12 13:00:00 // Recalc add 60 minutes, because the hour does not exist.)
// recalc 2020-03-29 03:00:00 // -(12*60+(11+2)*1440+21*60 min)= -(20700 min) = 29.3.2020 3:00
// easter 2020-04-12 12:00:00 // +(12*60+(11+2)*1440+21*60 min)= +(20700 min) = 29.3.2020
Binho RbSoft ¶
6 years ago
If you use fraction of seconds, you may have surprises. It only occurs when the sum of the floating point parts results in exactly 1 second (0.5 + 0.5 ou 0.3 + 0.7, for example). See these cases at intervals slightly bigger than 1 second:
<?php
$objDataHora = date_create("2017-12-31T23:59:59.300");
$objIntervalo = new DateInterval("PT0S");
$objIntervalo->f = 0.600;
$objDataHora = date_add($objDataHora, $objIntervalo);
$strDataHora = date_format($objDataHora, "Y-m-d\TH:i:s.v");
?>
$strDataHora is correct: "2017-12-31T23:59:59.900"
<?php
$objDataHora = date_create("2017-12-31T23:59:59.300");
$objIntervalo = new DateInterval("PT0S");
$objIntervalo->f = 0.800;
$objDataHora = date_add($objDataHora, $objIntervalo);
$strDataHora = date_format($objDataHora, "Y-m-d\TH:i:s.v");
?>
$strDataHora is correct: "2018-01-01T00:00:00.100"
But...
<?php
$objDataHora = date_create("2017-12-31T23:59:59.300");
$objIntervalo = new DateInterval("PT0S");
$objIntervalo->f = 0.700;
$objDataHora = date_add($objDataHora, $objIntervalo);
$strDataHora = date_format($objDataHora, "Y-m-d\TH:i:s.v");
?>
$strDataHora has "2017-12-31T23:59:59.1000"
To resolve, add 1 second to the interval and f property must be negative (-1.0 plus original value):
<?php
$objDataHora = date_create("2017-12-31T23:59:59.300");
$objIntervalo = new DateInterval("PT1S");
$objIntervalo->f = -0.300; // = -1.0 + 0.700
$objDataHora = date_add($objDataHora, $objIntervalo);
$strDataHora = date_format($objDataHora, "Y-m-d\TH:i:s.v");
?>
$strDataHora is correct: "2018-01-01T00:00:00.000"
dm at resource-ps dot co dot uk ¶
9 years ago
Be careful when using this function, I may have happened upon a bug in PHP7.
My code is as follows
//get date from post or else fill with today's date
if (isset($_POST["from"]))
{
$from = date_create($_POST["from"]);
}else{
$from = date_create(date("Y-m-d"));
}
//get date from post if there isn't one just take the same date as what is in the $from variable and add one day to it
if (isset($_POST["to"]))
{
$to = date_create($_POST["to"]);
}else{
$to = $from;
date_modify($to, '+1 day');
}
echo(date_format($from, 'Y-m-d') . " " . date_format($to, 'Y-m-d'));
The resultant output is
$from = 2015-12-11
$to = 2015-12-11
In actuality the result should be
$from = 2015-12-10
$to = 2015-12-11
For some reason the code above modifies the $from variable in the line date_modify($to, '+1 day'); even though it shouldn't as the $from variable isn't being modified.
to fix this i needed to change the code to
//get date from post or else fill with today's date
if (isset($_POST["from"]))
{
$from = date_create($_POST["from"]);
}else{
$from = date_create(date("Y-m-d"));
}
//get date from post if there isn't one just take the same date as what is in the $from variable and add one day to it
if (isset($_POST["to"]))
{
$to = date_create($_POST["to"]);
}else{
$to = date_create(date("Y-m-d"));
date_modify($to, '+1 day');
}
echo(date_format($from, 'Y-m-d') . " " . date_format($to, 'Y-m-d'));
This isn't strictly the code I wanted. Possible bug?
fortruth at mabang dot net ¶
14 years ago
adding 15 min to a datetime
<?php
$initDate = new DateTime("2010/08/24");
$initDate->add(new DateInterval("PT15M"));
echo $initDate->format("Y/m/d m:i:s");//result: 2010/08/24 08:15:00
?>
period:
P1Y2M3DT1H2M3S
period time:
PT1H2M3S
