When using non blocking functions if you try to disconnect while your non blocking operation is in progress the disconnect command will not work until the operation is not finished.
ftp_nb_put
(PHP 4 >= 4.3.0, PHP 5, PHP 7)
ftp_nb_put — Stores a file on the FTP server (non-blocking)
설명
int ftp_nb_put
( resource
$ftp_stream
, string $remote_file
, string $local_file
, int $mode
[, int $startpos = 0
] )ftp_nb_put() stores a local file on the FTP server.
The difference between this function and the ftp_put() is that this function uploads the file asynchronously, so your program can perform other operations while the file is being uploaded.
인수
-
ftp_stream -
The link identifier of the FTP connection.
-
remote_file -
The remote file path.
-
local_file -
The local file path.
-
mode -
The transfer mode. Must be either
FTP_ASCIIorFTP_BINARY. -
startpos -
The position in the remote file to start uploading to.
반환값
Returns FTP_FAILED or FTP_FINISHED
or FTP_MOREDATA.
예제
Example #1 ftp_nb_put() example
<?php
// Initiate the Upload
$ret = ftp_nb_put($my_connection, "test.remote", "test.local", FTP_BINARY);
while ($ret == FTP_MOREDATA) {
// Do whatever you want
echo ".";
// Continue uploading...
$ret = ftp_nb_continue($my_connection);
}
if ($ret != FTP_FINISHED) {
echo "There was an error uploading the file...";
exit(1);
}
?>
Example #2 Resuming an upload with ftp_nb_put()
<?php
// Initiate
$ret = ftp_nb_put($my_connection, "test.remote", "test.local",
FTP_BINARY, ftp_size("test.remote"));
// OR: $ret = ftp_nb_put($my_connection, "test.remote", "test.local",
// FTP_BINARY, FTP_AUTORESUME);
while ($ret == FTP_MOREDATA) {
// Do whatever you want
echo ".";
// Continue uploading...
$ret = ftp_nb_continue($my_connection);
}
if ($ret != FTP_FINISHED) {
echo "There was an error uploading the file...";
exit(1);
}
?>
참고
- ftp_nb_fput() - Stores a file from an open file to the FTP server (non-blocking)
- ftp_nb_continue() - Continues retrieving/sending a file (non-blocking)
- ftp_put() - Uploads a file to the FTP server
- ftp_fput() - Uploads from an open file to the FTP server
add a note
User Contributed Notes 7 notes
manu at manux dot org ¶
19 years ago
Ariel asphp at dsgml dot com ¶
18 years ago
Don't add a sleep() inside the loop. If you do you will severely slow down the upload.
In my tests, each time through the loop it send about 2.5K, looping about 220 times per second. (Which is very little.)
You won't necessarily get the same numbers as me per loop, but clearly PHP does it's own management of the loop so that you don't consume all the CPU on the server.
ted at hostleft dot com ¶
19 years ago
If you receive an error like:
Warning: ftp_nb_put(): Unable to service PORT commands in /path/to/file.php on line 27
verify whether you need to be in PASV mode. You can go into PASV mode by declaring
> ftp_pasv($cnx,TRUE);
WebSee.ru ¶
15 years ago
How to realize the possibility of transferring data from one FTP-server to another via FXP:
<?php
// ...
$ansver = ftp_raw($ftp_conn1, 'PASV');
if (intval($ansver[0]) == 227) {
ftp_raw($ftp_conn2, 'PORT '.substr($ansver[0], $n = strpos($ansver[0], '(') + 1, strpos($m[0], ')', $n) - $n));
ftp_raw($ftp_conn1, 'STOR '.$filename); // need asynchronously (non-blocking)
ftp_raw($ftp_conn2, 'RETR '.$filename);
}
?>
brandon dot farber at gmail dot com ¶
18 years ago
I couldn't see this noted anywhere...
ftp_nb_put apparently takes a much much longer time to upload the file than ftp_put (I haven't done any packet sniffing or logging tests to find out why). I was using a script, nearly identical to the example above, and a 100KB file had only uploaded 3.99KB after about 8 minutes! The php script naturally timed out before it was complete.
I changed my function to use ftp_put, got rid of the loop to check FTP_MOREDATA (as you will see in the example above), and the same script uploaded 2.2MB within 30 seconds with no other changes.
If you're using this function instead of ftp_put *purely to try to speed up your script* and it's taking a long time, you might want to try ftp_put instead.
parasc at chetu dot com ¶
6 years ago
Hi Everybody,
ftp_put not working in client server, but it working properly on my local system.
Issue on client server:
Production.ERROR: ftp_put(): I won't open a connection to 172.31.17.181 (only to 52.33.186.63).
My script upload a file from local system to remote server.
Thanks
Paras Chauhan
kaiohken1982 at hotmail dot com ¶
18 years ago
Hi,
I tried to use both ftp_put() and ftp_nb_put() adding the
variable $start = date("Y:m:d h:i:s"); at the begin of the script and the variable $end = date("Y:m:d h:i:s"); at its end, after the file upload function.
With the gprs connection I'm now using and trying to upload a .jpg file of 67,5 kb the time difference between $start and $end was 40 seconds in both cases, so I can suppose that there is no difference between these upload function.
The difference comes if you put anything inside the while ($ftp_upload == FTP_MOREDATA) loop.
I hope this note can help.
Regards
