Watch out using a blank $dir as a "trick" to create temporary files in the system temporary directory.
<?php
$tmpfname = tempnam('', 'FOO'); // not good
?>
If an open_basedir restriction is in effect, the trick will not work. You will get a warning message like
Warning: tempnam() [function.tempnam]: open_basedir restriction in effect.
File() is not within the allowed path(s): (/var/www/vhosts/example.com/httpdocs:/tmp)
What works is this:
<?php
$tmpfname = tempnam(sys_get_temp_dir(), 'FOO'); // good
?>
tempnam
(PHP 4, PHP 5, PHP 7)
tempnam — Create file with unique file name
설명
string tempnam
( string
$dir
, string $prefix
)Creates a file with a unique filename, with access permission set to 0600, in the specified directory. If the directory does not exist or is not writable, tempnam() may generate a file in the system's temporary directory, and return the full path to that file, including its name.
인수
-
dir -
The directory where the temporary filename will be created.
-
prefix -
The prefix of the generated temporary filename.
Note: Windows uses only the first three characters of prefix.
반환값
Returns the new temporary filename (with path), or FALSE on
failure.
변경점
| 버전 | 설명 |
|---|---|
| 4.0.3 | This function's behavior changed in 4.0.3. The temporary file is also created to avoid a race condition where the file might appear in the filesystem between the time the string was generated and before the script gets around to creating the file. Note, that you need to remove the file in case you need it no more, it is not done automatically. |
예제
Example #1 tempnam() example
<?php
$tmpfname = tempnam("/tmp", "FOO");
$handle = fopen($tmpfname, "w");
fwrite($handle, "writing to tempfile");
fclose($handle);
// do here something
unlink($tmpfname);
?>
주의
Note: If PHP cannot create a file in the specified
dirparameter, it falls back on the system default. On NTFS this also happens if the specifieddircontains more than 65534 files.
참고
- tmpfile() - Creates a temporary file
- sys_get_temp_dir() - Returns directory path used for temporary files
- unlink() - Deletes a file
add a note
User Contributed Notes 23 notes
koyama ¶
15 years ago
php at REMOVEMEkennel17 dot co dot uk ¶
19 years ago
Note that tempnam returns the full path to the temporary file, not just the filename.
stanislav dot eckert at vizson dot de ¶
7 years ago
Please note that this function might throw a notice in PHP 7.1.0 and above. This was a bugfix: https://bugs.php.net/bug.php?id=69489
You can place an address operator (@) to sillence the notice:
<?php
if ($tmp = @tempnam() !== false) {
// ...
}
?>
Or you could try to set the "upload_tmp_dir" setting in your php.ini to the temporary folder path of your system. Not sure, if the last one prevents the notices.
Sebastian Kun ¶
19 years ago
If you go to the linux man page for the C function tempnam(3), you will see at the end "Never use this function. Use mkstemp(3) instead." But php's tempnam() function doesn't actually use tmpnam(3), so there's no problem (under Linux, it will use mkstemp(3) if it's available).
Artur Graniszewski ¶
14 years ago
tempnam() function does not support custom stream wrappers registered by stream_register_wrapper().
For example if you'll try to use tempnam() on Windows platform, PHP will try to generate unique filename in %TMP% folder (usually: C:\WINDOWS\Temp) without any warning or notice.
<?php
// << ...custom stream wrapper goes somewhere here...>>
echo '<pre>';
error_reporting(E_ALL);
ini_set('display_errors', true);
clearstatcache();
stream_register_wrapper('test', 'MemoryStream');
mkdir('test://aaa');
mkdir('test://aaa/cc');
mkdir('test://aaa/dd');
echo 'PHP '.PHP_VERSION;
echo '<br />node exists: '.file_exists('test://aaa/cc');
echo '<br />node is writable: '.is_writable('test://aaa/cc');
echo '<br />node is dir: '.is_dir('test://aaa/cc');
echo '<br />tempnam in dir: '.tempnam('test://aaa/cc', 'tmp');
echo "<br /></pre>";
?>
ouputs:
--------------------
PHP 5.2.13
node exists: 1
node is writable: 1
node is dir: 1
tempnam in dir: C:\Windows\Temp\tmp1D03.tmp
If you want to create temporary file, you have to create your own function (which will probably use opendir() and fopen($filename, "x") functions)
Jason Pell ¶
17 years ago
I want to guarantee that the file will be created in the specified directory or else the function should return FALSE, I have a simple function that works, but I am unsure if its a potential security issue.
function dir_tempnam($dir, $prefix)
{
$real_dir_path = realpath($dir);
if (substr($real_dir_path, -1) != '/')
$real_dir_path .= '/';
$tempfile = tempnam($real_dir_path, $prefix);
$name = basename($tempfile);
if(is_file($real_dir_path.$name))
return $name;
else
{
@unlink($name);
return FALSE;
}
}
This function returns just the name of the temporary file in the specified directory, or FALSE.
Obviously it could return the entire $tempfile, but in my case, I actually want the basename value seperate.
Ron Korving ¶
18 years ago
This function creates a temporary directory. The previous example given could bug if between the unlink() and mkdir() some process creates the same directory or file. This implementation is faster too.
<?php
function tempdir($dir, $prefix='', $mode=0700)
{
if (substr($dir, -1) != '/') $dir .= '/';
do
{
$path = $dir.$prefix.mt_rand(0, 9999999);
} while (!mkdir($path, $mode));
return $path;
}
?>
anakin dot skyw at gmx dot de ¶
20 years ago
>Under UNIX (where you can rename onto an extant file and so I used link), you will have to remove both the link and the link's target.
Couldn't you do
<?php
if ($newFileCreated) {
unlink ($sysFileName);
return $newFileName;
}
?>
and get the same semantics as the windows version?
divinity76+yaoiporn at gmail dot com ¶
11 years ago
if you don't want to take care of deleting the file yourself, and you don't need a custom prefix, you can use
$file_location=stream_get_meta_data(tmpfile())['uri'];
file will be created automatically, and deleted automatically on script close (thanks to tmpfile()) i found this useful for CURLOPT_COOKIEFILE (which wants a file location, not a handle)
bishop ¶
20 years ago
Creating a temporary file with a specific extension is a common requirement on dynamic websites. Largely this need arises from Microsoft browsers that identify a downloaded file's mimetype based on the file's extension.
No single PHP function creates a temporary filename with a specific extension, and, as has been shown, there are race conditions involved unless you use the PHP atomic primitives.
I use only primitives below and exploit OS dependent behaviour to securely create a file with a specific postfix, prefix, and directory. Enjoy.
<?php
function secure_tmpname($postfix = '.tmp', $prefix = 'tmp', $dir = null) {
// validate arguments
if (! (isset($postfix) && is_string($postfix))) {
return false;
}
if (! (isset($prefix) && is_string($prefix))) {
return false;
}
if (! isset($dir)) {
$dir = getcwd();
}
// find a temporary name
$tries = 1;
do {
// get a known, unique temporary file name
$sysFileName = tempnam($dir, $prefix);
if ($sysFileName === false) {
return false;
}
// tack on the extension
$newFileName = $sysFileName . $postfix;
if ($sysFileName == $newFileName) {
return $sysFileName;
}
// move or point the created temporary file to the new filename
// NOTE: these fail if the new file name exist
$newFileCreated = (isWindows() ? @rename($sysFileName, $newFileName) : @link($sysFileName, $newFileName));
if ($newFileCreated) {
return $newFileName;
}
unlink ($sysFileName);
$tries++;
} while ($tries <= 5);
return false;
}
?>
The isWindows function is mostly left as an exercise for the reader. A starting point is below:
<?php
function isWindows() {
return (DIRECTORY_SEPARATOR == '\\' ? true : false);
}
?>
Like tempnam(), this function requires you to cleanup your own files later. Under UNIX (where you can rename onto an extant file and so I used link), you will have to remove both the link and the link's target. Cleanup is left entirely to the reader.
wapmorgan ¶
10 years ago
Notice that tempnam will return NULL (not false) if the second parameter <prefix> isn't transferred:
<?php
var_dump(tempnam(sys_get_temp_dir())); // NULL
?>
also the warning will be generated:
Warning: tempnam() expects exactly 2 parameters, 1 given in php shell code ...
tux ARROBA cenobioracing PUNTO com ¶
18 years ago
Beware that on Windows NT and other windows, if you have, for example, a variable $work_dir with a path to some dir on your document root(or any other dir). Note the following:
<?php
$work_dir = 'C:/some/path/to/document_root/dir';
file_exists($working_dir); // Returns true
is_writable($working_dir); // Returns true
$tempfile = tempnam($working_dir,'img');
//$temfile now contains a system wide temp directory file, like 'C:/WINNT.SBS/img444.tmp' instead of the directory we pass it
//Thats because we need to give I_USR (IIS user) user write permission to $working_dir although according to the aforementioned functions seemed it already had it...
//If you want to use just the system wide temp directory return by default by tempnam you will also need to give it write permission to I_USR user to be able to write to that file...
?>
tomas at slax dot org ¶
14 years ago
Beware: functions are not atomic. If many processes call the same function at the same time, you may end up with unwanted behavior.
If you need your own variant of tempnam, use something like this:
<?php
function tempnam_sfx($path, $suffix)
{
do
{
$file = $path."/".mt_rand().$suffix;
$fp = @fopen($file, 'x');
}
while(!$fp);
fclose($fp);
return $file;
}
// call it like this:
$file = tempnam_sfx("/tmp", ".jpg");
?>
You may replace mt_rand() by some other random name generator, if needed.
lreilly at lanl dot gov ¶
22 years ago
Be careful with you forward and back slashes. Innocent looking code like this...
$uploaddir = "C:/Program Files/Apache Group/Apache2/htdocs/sasdap/uploads/";
$tempFile = tempnam ($uploaddir, "TMPANAL");
$fp = fopen($tmpfname, "w");
fwrite($fp, $iqdata);
//fclose($fp);
... may show something odd when echoing $tempFile";
i.e. /Program Files/Apache Group/Apache2/htdocs/sasdap/uploads/\TMP3D.tmp
Must... remember... to... use... backslashes...
- Lee P. Reilly
Anonymous ¶
12 years ago
tempnam will not create file in unauthorized area.
Meaning you need access permissions to the temp dir ($dir) in order to create a file there.
phpdoc at rickbradley dot com ¶
21 years ago
The "newtempnam" recipe provided below (posted by "tempnam" on " 23-Jul-2003 08:56") has at least one race condition. The while loop checks to make sure that the file in question doesn't exist, and then goes and creates the file. In between the existence test and the fopen() call there is an opportunity for an attacker to create the file in question.
This is a classic race-condition, and while it seems difficult to exploit there are a number of well-known attacks against this kind of sloppy file creation.
The atomic primitives necessary to implement secure file creation are not available at the language level in PHP. This further underscores the need for PHP-language developers to rely on the language's security primitives (including tempnam() and tempfile()) instead of rolling their own.
dmhouse at gmail dot com ¶
17 years ago
Guillaume Paramelle's comments below are worth underlining: tempnam() will not accept a relative path for its first directory. If you pass it one, it will (on Windows XP at least) create the temporary file in the system temp directory.
The easiest way to convert a relative path to an absolute path is to prepend getcwd():
<?php
$file = tempnam('files/temp', 'tmp'); // Wrong!
$file = tempnam(getcwd() . 'files/tmp', 'tmp') // Right.
?>
hm2k at php dot net ¶
15 years ago
<?php
function tempdir($dir=false,$prefix='php') {
$tempfile=tempnam('','');
if (file_exists($tempfile)) { unlink($tempfile); }
mkdir($tempfile);
if (is_dir($tempfile)) { return $tempfile; }
}
/*example*/
echo tempdir();
// returns: /tmp/8e9MLi
?>
anthon at piwik dot org ¶
14 years ago
The file created by tempnam() will have file permissions that reflect the current umask applied to the default (e.g., 0600 or -rw-------). This is the case whether the umask is set before starting the web server process, or set by an earlier call to PHP's umask() function.
For example, if the current umask is 0022, the temporary file is created with permissions 0600 (read/write by owner).
Also, if the current umask is 0222, the temporary file is created with permissions 0400 (read-only by owner). (This is problematic if your code then tries to open the temporary file for writing.)
It's important to remember that the umask revokes permissions. In neither of the above examples are the group, other, or execute permissions set.
See: umask(), chmod().
david at frankieandshadow dot com ¶
6 years ago
Debian 9 Stretch adds private temporary directories, so if you use this function when running as mod_php in Apache expecting that the file can be made available to a third party (e.g. in a shell command or a MariaDB load from temporary file command), it will no longer work: the file will not be visible to other processes, (though the same PHP will be able to read it back in).
Either you need to use the first parameter to put the temporary file somewhere specific (outside the HTML document tree) with permissions such that you can share it with the other party, or change the settings for private tmp, for example:
cp /lib/systemd/system/apache2.service /etc/systemd/system/
# edit /etc/systemd/system/ to change PrivateTmp=true to false
systemctl daemon-reload
service apache2 restart
Choosing a different location is better on a shared server - private tmp files were added for a reason.
This was something that puzzled me for ages when doing a recent OS upgrade.
KOmaSHOOTER at gmx dot de ¶
19 years ago
This Example makes a File called "user.txt"
in the dir www.XXXXX.XX/restricted/
<?php
$tmpfname = tempnam($_ENV["DOCUMENT_ROOT"]."/restricted", "FOO");
$handle = fopen($tmpfname, "w");
fwrite($handle, "writing to tempfile");
fclose($handle);
// do here something
//echo($_ENV["DOCUMENT_ROOT"]);
copy($tmpfname,'user.txt');
?>
Nick Smith ¶
19 years ago
It is worth noting that if the 'dir' that you supply doesn't exist, then it is silently ignored and the system /tmp directory used. At least under Linux, PHP v4.1.2.
I had a script that appeared to work fine with safe mode switched off, but I didn't realise that my 'dir' parameter had a typo (so the files were going in /tmp), and once safe mode was switched on I started getting errors because the rest of the script couldn't read files from the system /tmp folder.
Steve Clay ¶
11 years ago
You don't need tempdir(). Just use tempnam() and replace it with a directory of the same name:
<?php
$temp_dir = tempnam('/tmp', 'prefix');
unlink($temp_dir);
mkdir($temp_dir);
