intval

(PHP 4, PHP 5, PHP 7, PHP 8)

intval — Obtém o valor em número inteiro de uma variável

Descrição

intval(mixed $value, int $base = 10): int

Retorta o valor do tipo int do parâmetro value, usando a base especificada para a conversão (o padrão é base 10). intval() não deve ser usada em objetos, se isto for feito emitirá um erro de nível E_WARNING e retornará 1.

Parâmetros

value

O valor escalar a ser convertido para um número inteiro

base

A base para conversão

Nota:
Se base for 0, a base usada será determinada pelo formado de value:

se a string incluir um prefixo "0x" (ou "0X"), a base será 16 (hexadecimal); senão,

se a string começar com um "0b" (ou "0B"), a base será 2 (binária); senão,

sea string começar com "0", a base será 8 (octal); senão,

a base será 10 (decimal).

Valor Retornado

O valor inteiro de value em caso de sucesso ou 0 em caso de falhar. Arrays vazios retornam 0, arrays não vazios retornam 1.

O valor máximo depende do sistema. Sistemas de 32 bits têm uma faixa inteiros com sinal de -2147483648 to 2147483647. Então, por exemplo, em um sistema desses, intval('1000000000000') retornará 2147483647. O máximo inteiro com sinal para sistemas de 64 bits é 9223372036854775807.

Strings na maior parte das vezes retornarão 0 embora isso dependa do caractere mais à esquerda dele da string. As regras comuns à conversão para inteiros se aplicam.

Registro de Alterações

Versão	Descrição
8.0.0	O nível de erro na conversão de objeto mudou de `E_NOTICE` para `E_WARNING`.

Exemplos

Exemplo #1 Exemplos de intval()

Os seguintes exemplos são baseados em um sistema de 64 bits.

<?php
echo intval(42);                      // 42
echo intval(4.2);                     // 4
echo intval('42');                    // 42
echo intval('+42');                   // 42
echo intval('-42');                   // -42
echo intval(042);                     // 34
echo intval('042');                   // 42
echo intval(1e10);                    // 10000000000
echo intval('1e10');                  // 10000000000
echo intval(0x1A);                    // 26
echo intval('0x1A');                  // 0
echo intval('0x1A', 0);               // 26
echo intval(42000000);                // 42000000
echo intval(420000000000000000000);   // -4275113695319687168
echo intval('420000000000000000000'); // 9223372036854775807
echo intval(42, 8);                   // 42
echo intval('42', 8);                 // 34
echo intval(array());                 // 0
echo intval(array('foo', 'bar'));     // 1
echo intval(false);                   // 0
echo intval(true);                    // 1
?>

Notas

Nota:
O parâmetro base não terá efeito a menos que o parâmetro value seja uma string.

Veja Também

boolval() - Obtém o valor booleano de uma variável
floatval() - Obtém o valor em ponto flutuante da variável
strval() - Retorna o valor string de uma variável
settype() - Define o tipo de uma variável
is_numeric() - Verifica se uma variável é um número ou uma string numérica
Manipulação de Tipos
BCMath Funções Matemáticas de Precisão Arbitrária

add a note

User Contributed Notes 16 notes

down

336

Ken ¶

13 years ago


Not mentioned elsewhere: intval(NULL) also returns 0.

down

143

winbill at hotmail dot com ¶

14 years ago


Be careful :

<?php
$n="19.99";
print intval($n*100); // prints 1998
print intval(strval($n*100)); // prints 1999
?>

down

leon at leonidasjp dot nl ¶

7 years ago


It seems intval is interpreting valid numeric strings differently between PHP 5.6 and 7.0 on one hand, and PHP 7.1 on the other hand.

<?php
echo intval('1e5');
?>

will return 1 on PHP 5.6 and PHP 7.0,
but it will return 100000 on PHP 7.1.

down

zak at php dot net ¶

24 years ago


intval converts doubles to integers by truncating the fractional component of the number.



When dealing with some values, this can give odd results.  Consider the following:



print intval ((0.1 + 0.7) * 10);



This will most likely print out 7, instead of the expected value of 8.



For more information, see the section on floating point numbers in the PHP manual (http://www.php.net/manual/language.types.double.php)



Also note that if you try to convert a string to an integer, the result is often 0.



However, if the leftmost character of a string looks like a valid numeric value, then PHP will keep reading the string until a character that is not valid in a number is encountered.



For example:



"101 Dalmations" will convert to 101



"$1,000,000" will convert to 0 (the 1st character is not a valid start for a number



"80,000 leagues ..." will convert to 80



"1.4e98 microLenats were generated when..." will convert to 1.4e98



Also note that only decimal base numbers are recognized in strings.



"099" will convert to 99, while "0x99" will convert to 0.



One additional note on the behavior of intval.  If you specify the base argument, the var argument should be a string - otherwise the base will not be applied.



For Example:



print intval (77, 8);   // Prints 77

print intval ('77', 8); // Prints 63

down

Ben Laurienti ¶

18 years ago


You guys are going to love this.  I found something that I found quite disturbing.

$test1 = intVal(1999);

$amount = 19.99 * 100;
$test2 = intVal($amount);
$test3 = intVal("$amount");

echo $test1 . "<br />\n";
echo $test2 . "<br />\n";
echo $test3 . "<br />\n";

expected output:
1999
1999
1999

actual output
1999
1998
1999

Appears to be a floating point issue, but the number 1999 is the only number that I was able to get to do this.  19.99 is the price of many things, and for our purpose we must pass it as 1999 instead of 19.99.

down

spoon_reloaded at gmail dot com ¶

15 years ago


Here is a really useful undocumented feature:



You can have it automatically deduce the base of the number from the prefix of the string using the same syntax as integer literals in PHP ("0x" for hexadecimal, "0" for octal, non-"0" for decimal) by passing a base of 0 to intval():



<?php

echo intval("0x1a", 0), "\n"; // hex; prints "26"

echo intval("057", 0), "\n"; // octal; prints "47"

echo intval("42", 0), "\n"; // decimal; prints "42"

?>

down

Anonymous ¶

4 years ago


PHP 7.2 

$test = intval(150.20*100); //15019
$test2 = intval(15020); //15020
$test3 = intval(15020.0); //15020
$test4 = 150.20*100; //15020.0

down

Anthony ¶

6 years ago


The binary notation is NOT supported until php7.2
<?php
                         // PHP <7.2 | PHP >=7.2
echo intval(0b11);       //    3     |     3
echo intval(-0b11);      //   -3     |    -3
echo intval('0b11');     //    0     |     0
echo intval('-0b11');    //    0     |     0
echo intval('0b11', 0);  //    0     |     3
echo intval('-0b11', 0); //    0     |    -3
?>

down

espertalhao04 at hotmail dot com ¶

11 years ago


if you want to take a number from a string, no matter what it may contain, here is a good solution:

<?php
function int($s){return(int)preg_replace('/[^\-\d]*(\-?\d*).*/','$1',$s);}

echo int('j18ugj9hu0gj5hg');
//output: 18
?>
this example returns an int, so it will follow the int rules, and has support for negative values.

<?php
function int($s){return($a=preg_replace('/[^\-\d]*(\-?\d*).*/','$1',$s))?$a:'0';}

echo int('j-1809809808908099878758765ugj9hu0gj5hg');
//output: -1809809808908099878758765
?>

this one returns a string with just the numeric value.
it also supports negative values.

the latter is better when you have a 32 bit system and you want a huge int that is higher than PHP_MAX_INT.

down

Anony Moose ¶

4 years ago


As a warning, do not use this function alone for input validation. 

Vulnerable example:
<?php
if(isset($_GET['id']) && intval($_GET['id']) > 0){
    echo $id;
}
?>

The following requests would pass this filter:

/page.php?id=10
/page.php?id=10oops
/page.php?id=10<script>alert(1)</script>
/page.php?id=1' OR '1'='1
/page.php?id[]=<script>alert(1)</script>

Instead use the is_numeric() function for integer validation:

<?php
echo intval("10oops"); // 10
echo is_numeric("10oops");  // false
?>

Secure example:
<?php
if(isset($_GET['id']) && is_numeric($_GET['id']) && intval($_GET['id']) > 0){
    echo $id;
}
?>

down

tuxedobob at mac dot com ¶

20 years ago


Sometimes intval just won't cut it. For example if you want to use an unsigned 32-bit int and need all 32 bits. Recently, I wrote a little script that took and integer and converted it to an IP address. After realizing I couldn't just mod the whole thing, since the sign bit throws it off (and compensating for that), we ran into a problem where if it was entered into a form, the value somehow wasn't converted to an integer properly, at least not implicitly. The solution for this, and the way I recommend converting a string to an integer, is:

$num = $num + 0;

and PHP will leave your number alone; it'll just know it's a number. Such is the fun of a loosely-typed language. :)

down

mkamerma at science dot uva dot nl ¶

18 years ago


As addendum, the "if ($int > 0)" check in the encode function is redundant. It doesn't do anything bad to keep it in since it will always be true when reaching that point, but it's a meaningless conditional this way. It's a remnant from when I tried to write the function in terms of bitshifts, which could lead to negative ints when shifting if the 32nd bit was set (instead of always padding with 0's when using >> it pads with 1's leading to negative ints).

down

pfreet at gmail dot com ¶

11 years ago


Do not use intval() when you really want round(). This is due to how PHP handles precision. 

echo number_format(8.20*100, 20), "<br />";
echo intval(8.20*100), "<br />";
echo floor(8.20*100), "<br />";
echo round(8.20*100), "<br />";

819.99999999999988631316
819 
819
820

down

taylorsarrafian at gmail dot com ¶

9 years ago


beware:

<?php

   // observe the following
   echo intval( strval( -0.0001 ) ); // 0
   echo intval( strval( -0.00001 ) ); // -1

   // this is because
   echo strval( -0.0001 ); // -.0001
   echo strval( -0.00001 ); // -1.0E-5

   // thus beware when using
   function trunc2_bad( $n ) {
      return intval( strval( $n * 100 ) / 100 );
   }

   // use this instead
   function trunc2_good( $n ) {
      return intval( floatval( strval( $n * 100 )  ) / 100 );
   }

?>

down

yves ¶

13 years ago


The behaviour of intval() is interesting when supplying a base, and you better check your intval base-based expressions, as it is counter-intuitive.
As the example shows
<?php
  intval('42', 8); // => 34
  intval(42, 8);   // => 42 !
?>
PHP considers the 42 as being already an integer, and doesn't apply any conversion. And supplying
<?php
  intval(49, 8);  // => 49 !
?>
produces no error and no warning.

down

Denes Kellner ¶

10 months ago


Warning: intval() parses scientific notation, like "12.3e7".

This comes out of the blue when you use intval() to cut the first integer value from a string; at first glance there's nothing wrong with it, if you have "123.jeff" it will give you 123, but in the rare case of parsing something that has a second segment with a hex number, you can easily run into this. (Let's not start the "why would you parse a string like that" argument.)

So if you're not prepared, these results may surprise you:

    intval("123.ee-2") - gives you 123
    intval("123.e2-e") - gives you 12300
    intval("123.a2-e") - gives you 123
    intval("123.e-22") - gives you 0
    intval("123.e-a2") - gives you 123
    intval("123.e-2a") - gives you 1
    intval("123.2e2a") - gives you 12320
    intval("123.22e2") - gives you 12322
    intval("123.22ea") - gives you 123

Again, this is somewhat expected behaviour once you know that scientific notation is interpreted by it. But it looks like a less-than-widely known fact and I only faced this issue after 20+ years of php.

add a note