stream_socket_server

(PHP 5, PHP 7, PHP 8)

stream_socket_server — Cria socket de servidor de domínio Internet ou Unix

Descrição

stream_socket_server(
    string $address,
    int &$error_code = null,
    string &$error_message = null,
    int $flags = STREAM_SERVER_BIND | STREAM_SERVER_LISTEN,
    ?resource $context = null
): resource|false

Cria um socket de fluxo ou datagrama no endereço especificado em address.

Este função apenas cria um socket, para começar a aceitar conexões use stream_socket_accept().

Parâmetros

address

O tipo de socket criado é determinado pelo transporte especificado utilizando-se o formato padrão de URL: transporte://alvo.

Para sockets do domínio da Internet (AF_INET) como TCP e UDP, a porção alvo do parâmetro remote_socket deve sonsistir de um nome de servidor ou endereço IP seguido de dois-pontos e um número de porta. Para sockets do domínio Unix, a porção alvo deve apontar para o arquivo de socket do sistema de arquivos.

Dependendo do ambiente, sockets do domínio Unix podem não estar disponíveis. Uma lista de transportes disponíveis pode ser obtida usando a função stream_get_transports(). Consulte Lista de Transportes via Socket Suportados para uma lista de transportes existentes.

error_code

Se or argumentos opcionais error_code e error_message estiverem presentes, eles serão definidos para indicar o erro real que ocorreu ocorreu nas chamadas de sistema socket(), bind() e listen(). Se o valor retornado em error_code for 0 e a função retornou false, é um indicativo que o erro ocorreu antes da chamada a bind(). Isto mais provavelmente será devido a um problema na inicialização do socket. Note que os argumentos error_code e error_message serão sempre passados por referência.

error_message

Consulte a descrição para error_code.

flags

Um campo de máscara de bits que pode ser definido para qualquer combinação de opções de criação de sockets.

Nota:
Para sockets UDP, deve ser usado STREAM_SERVER_BIND como o parâmetro flags.

context

Valor Retornado

Retorna o fluxo criado, ou false em caso de erro.

Registro de Alterações

Versão	Descrição
8.0.0	`context` agora pode ser nulo.

Exemplos

Exemplo #1 Usando sockets de servidor TCP

<?php
$socket = stream_socket_server("tcp://0.0.0.0:8000", $errno, $errstr);
if (!$socket) {
  echo "$errstr ($errno)<br />\n";
} else {
  while ($conn = stream_socket_accept($socket)) {
    fwrite($conn, 'O horário atual é ' . date('n/j/Y g:i a') . "\n");
    fclose($conn);
  }
  fclose($socket);
}
?>

O exemplo abaixo mostra como agir como um servidor de data/hora que pode responder a requisições de horário como mostrado em um exemplo de stream_socket_client().

Nota: A maioria dos sistemas requerem acesso de administrador para criar um socket de servidor em portas abaixo de 1024.

Exemplo #2 Usando sockets de servidor usando UDP

<?php
$socket = stream_socket_server("udp://127.0.0.1:1113", $errno, $errstr, STREAM_SERVER_BIND);
if (!$socket) {
    die("$errstr ($errno)");
}

do {
    $pkt = stream_socket_recvfrom($socket, 1, 0, $peer);
    echo "$peer\n";
    stream_socket_sendto($socket, date("D M j H:i:s Y\r\n"), 0, $peer);
} while ($pkt !== false);

?>

Notas

Nota: Ao especificar um endereço IPv6 numérico (por exemplo, fe80::1), o IP deve ser colocado entre colchetes — por exemplo, tcp://[fe80::1]:80.

Veja Também

stream_socket_client() - Abre conexão de socket de domínio Internet ou Unix
stream_set_blocking() - Definir modo de bloqueio/não-bloqueio em um fluxo
stream_set_timeout() - Define o limite de tempo em um fluxo
fgets() - Lê uma linha de um ponteiro de arquivo
fgetss() - Ler uma linha de um ponteiro de arquivo e retira as tags HTML
fwrite() - Escrita binary-safe em arquivos
fclose() - Fecha um ponteiro de arquivo aberto
feof() - Testa pelo fim-de-arquivo em um ponteiro de arquivo
Extensão Curl

add a note

User Contributed Notes 10 notes

down

blackmac01 at gmail dot com ¶

8 years ago


I'm writing an HTTP server and I need SSL support, but getting this to work correctly with PHP streams took a bit of trial and error. For anyone who is trying to get an HTTP SSL server working with stream_socket_server:

1) Your SSL context will need to contain 'local_cert'. If  you did not include your private key with your local_cert, you'll also need to specify 'local_pk' which is your RSA key.  Your keys and certs should be PEM encoded, which means base-64. If your certificate has intermediary certs, you will need to specify those in the correct order: Your signed cert, intermediary cert 1, intermediary cert 2, etc. Each cert in the list needs to validate the one above it, but you do not need to include the CA Root that your SSL signer provided; that should already be included with the client's software (i.e. trust root certs).

You can append your private key in the file with your certs, however I keep mine in its own file. If you see the word "encrypted" when you view your key with a text viewer, you need to enter the correct passphrase and specify the context "passphrase", otherwise you can leave that one out.

As a server, verify_peer is irrelevant and should be set to false (should always be true if you are acting as an SSL client). Both cafile and capath contexts are not needed for functioning as a SSL/TLS server, but they are needed if you are making SSL connections with PHP as the client.

Lastly, the 'ciphers' context should be set to a list of secure ciphers. Search for "mozilla recommended ciphers" and choose the string of ciphers that works for you, because not all openssl supported ciphers are secure. I went with the "intermediate" list, which provides high security and compatibility.

2) When you create the binding for stream_socket_server(), make sure that you choose the tcp:// wrapper. DO NOT USE ssl:// or tls://. Anything other than tcp:// will not work correctly AS A SERVER, those transports are what you use when making connections with PHP as a client. 

Remember that the encryption does not start until after an SSL handshake completes, so the server has to listen in non-encrypted mode for new connections, and encryption doesn't start until certs are exchanged and a cipher is selected. When a new connection arrives you accept it with stream_socket_accept() and then use stream_socket_enable_crypto() to start the SSL session.

3) Keep in mind that the SSL handshake takes time, and that the stream_socket wrappers are high level and not as responsive as the socket extension due to the additional overhead they incur. For this reason you will need to enable blocking for accepting new connections.

<enable blocking on ServerListenStream>
newConnStream = stream_socket_accept(ServerListenStream);
<disable blocking on ServerListenStream>

<enable blocking on newConnStream >
stream_socket_enable_crypto(newConnStream, true, STREAM_CRYPTO_METHOD_SSLv23_SERVER);
<disable blocking on newConnStream >

Note that this is mainly for HTTP. If you are trying to do something like SMTP then your script will have to react to the "starttls" command, but it would be similar to the above except that you would wait for the "starttls" command before invoking the  stream_socket_enable_crypto() function on the client's stream.

TLS 1.0 is generally the way to go, SSLv3 is insecure and SSLv2 is buggy. If you use the mozilla recommend cipher list in your context, you'll be fine. Hope this helps someone out!

down

davidm at marketo dot com ¶

14 years ago


In some specialized scenarios, you may want to create an AF_INET socket (UDP or TCP) but let the system select an unused port for you.  This is a standard feature of internet sockets but it doesn't seem to be documented how to do this for the stream_socket_server function.  It appears you can get this behavior by selecting zero for the port number, for example, my test below printed "127.0.0.1:4960".



<?php

  $sock = stream_socket_server("udp://127.0.0.1:0"); 

  $name = stream_socket_get_name($sock);

  echo $name;

?>

down

Heretic86 at roadrunner dot com ¶

3 years ago


This is an example of how to set up stream_socket_server to connect with multiple Secure Websockets on WSS (wss://) that uses SSL / TLS as a Transport.  

This runs on a Windows Apache Server with a registered domain and SSL Cert from LetsEncrypt via Certbot.

Run this script from a console "php server.php", and javascript html as a client with:
socket = new WebSocket('wss://php.net:1234');

<?php
$host = '192.168.1.2';
$port = 1234;
$path = 'C:/Certbot/live/php.net/';
$transport = 'tlsv1.3';
$ssl = ['ssl' => [
          'local_cert'  => $path . 'cert.pem',       // SSL Certificate
          'local_pk'    => $path . 'privkey.pem',    // SSL Keyfile
          'disable_compression' => true,             // TLS compression attack vulnerability
          'verify_peer'         => false,            // Set this to true if acting as an SSL client
          'ssltransport' => $transport,              // Transport Methods such as 'tlsv1.1', tlsv1.2' 
        ] ];
$ssl_context = stream_context_create($ssl);
$server = stream_socket_server($transport . '://' . $host . ':' . $port, $errno, $errstr, STREAM_SERVER_BIND|STREAM_SERVER_LISTEN, $ssl_context);
if (!$server) {  die("$errstr ($errno)"); } 
$clients = array($server);
$write  = NULL;
$except = NULL;
while (true) {
  $changed = $clients;
  stream_select($changed, $write, $except, 10);
  if (in_array($server, $changed)) {
    $client = @stream_socket_accept($server);
    if (!$client){ continue; }
    $clients[] = $client;
    $ip = stream_socket_get_name( $client, true );
    echo "New Client connected from $ip\n";
    
    stream_set_blocking($client, true);
    $headers = fread($client, 1500);
    handshake($client, $headers, $host, $port);
    stream_set_blocking($client, false);

    send_message($clients, mask($ip . ' connected'));
    $found_socket = array_search($server, $changed);
    unset($changed[$found_socket]);     
  }
  foreach ($changed as $changed_socket) {
    $ip = stream_socket_get_name( $changed_socket, true );
    $buffer = stream_get_contents($changed_socket);
        if ($buffer == false) {
      echo "Client Disconnected from $ip\n";
      @fclose($changed_socket);
            $found_socket = array_search($changed_socket, $clients);
            unset($clients[$found_socket]);
        }
    $unmasked = unmask($buffer);
    if ($unmasked != "") { echo "\nReceived a Message from $ip:\n\"$unmasked\" \n"; }
    $response = mask($unmasked);
    send_message($clients, $response);
  }
}
fclose($server);

function unmask($text) {
    $length = @ord($text[1]) & 127;
    if($length == 126) {    $masks = substr($text, 4, 4);    $data = substr($text, 8); }
    elseif($length == 127) {    $masks = substr($text, 10, 4); $data = substr($text, 14); }
    else { $masks = substr($text, 2, 4); $data = substr($text, 6); }
    $text = "";
    for ($i = 0; $i < strlen($data); ++$i) { $text .= $data[$i] ^ $masks[$i % 4];    }
    return $text;
}
function mask($text) {
    $b1 = 0x80 | (0x1 & 0x0f);
    $length = strlen($text);
    if($length <= 125)
        $header = pack('CC', $b1, $length);
    elseif($length > 125 && $length < 65536)
        $header = pack('CCn', $b1, 126, $length);
    elseif($length >= 65536)
        $header = pack('CCNN', $b1, 127, $length);
    return $header.$text;
}
function handshake($client, $rcvd, $host, $port){
    $headers = array();
    $lines = preg_split("/\r\n/", $rcvd);
    foreach($lines as $line)
    {
        $line = rtrim($line);
        if(preg_match('/\A(\S+): (.*)\z/', $line, $matches)){
            $headers[$matches[1]] = $matches[2];
        }
    }
    $secKey = $headers['Sec-WebSocket-Key'];
    $secAccept = base64_encode(pack('H*', sha1($secKey . '258EAFA5-E914-47DA-95CA-C5AB0DC85B11')));
    //hand shaking header
    $upgrade  = "HTTP/1.1 101 Web Socket Protocol Handshake\r\n" .
    "Upgrade: websocket\r\n" .
    "Connection: Upgrade\r\n" .
    "WebSocket-Origin: $host\r\n" .
    "WebSocket-Location: wss://$host:$port\r\n".
    "Sec-WebSocket-Version: 13\r\n" .
    "Sec-WebSocket-Accept:$secAccept\r\n\r\n";
  fwrite($client, $upgrade);
}
function send_message($clients, $msg){
    foreach($clients as $changed_socket){
    @fwrite($changed_socket, $msg);
    }
}
?>

down

frxstrem ¶

14 years ago


Using the OpenSSL extension, PHP can automatically generate self-signed SSL certificates, which can be used for basic authentication and encryption (although I would recommend to use a signed certificate instead) for SSL servers.

I have extended the script by 'e at osterman dot com' to automatically create self-signed certificates:

<?php
// Hello World! SSL HTTP Server.
// Tested on PHP 5.1.2-1+b1 (cli) (built: Mar 20 2006 04:17:24)

// Certificate data:
$dn = array(
    "countryName" => "UK",
    "stateOrProvinceName" => "Somerset",
    "localityName" => "Glastonbury",
    "organizationName" => "The Brain Room Limited",
    "organizationalUnitName" => "PHP Documentation Team",
    "commonName" => "Wez Furlong",
    "emailAddress" => "wez@example.com"
);

// Generate certificate
$privkey = openssl_pkey_new();
$cert    = openssl_csr_new($dn, $privkey);
$cert    = openssl_csr_sign($cert, null, $privkey, 365);

// Generate PEM file
# Optionally change the passphrase from 'comet' to whatever you want, or leave it empty for no passphrase
$pem_passphrase = 'comet';
$pem = array();
openssl_x509_export($cert, $pem[0]);
openssl_pkey_export($privkey, $pem[1], $pem_passphrase);
$pem = implode($pem);

// Save PEM file
$pemfile = './server.pem';
file_put_contents($pemfile, $pem);

$context = stream_context_create();

// local_cert must be in PEM format
stream_context_set_option($context, 'ssl', 'local_cert', $pemfile);
// Pass Phrase (password) of private key
stream_context_set_option($context, 'ssl', 'passphrase', $pem_passphrase);

stream_context_set_option($context, 'ssl', 'allow_self_signed', true);
stream_context_set_option($context, 'ssl', 'verify_peer', false);

// Create the server socket
$server = stream_socket_server('ssl://0.0.0.0:9001', $errno, $errstr, STREAM_SERVER_BIND|STREAM_SERVER_LISTEN, $context);

while(true)
{
    $buffer = '';
    print "waiting...";
    $client = stream_socket_accept($server);
    print "accepted " . stream_socket_get_name( $client, true) . "\n";
    if( $client )
    {
        // Read until double CRLF
        while( !preg_match('/\r?\n\r?\n/', $buffer) )
            $buffer .= fread($client, 2046); 
        // Respond to client
        fwrite($client,  "200 OK HTTP/1.1\r\n"
                         . "Connection: close\r\n"
                         . "Content-Type: text/html\r\n"
                         . "\r\n"
                         . "Hello World! " . microtime(true)
                         . "<pre>{$buffer}</pre>");
        fclose($client);
    } else {
        print "error.\n";
    }
}

?>

down

andrey at php dot net ¶

20 years ago


Just a small example how to use this function and also stream_select() to make a server that accepts more than one connections (can have many clients connected):
In master we hold all opened connections. Just before calling stream select we copy the array to $read and then pass it ot stream_select(). In case that we may read from at least one socket, $read will contain socket descriptors. $master is needed not to lose references to the opened connections we have.
stream_server.php : 
<?php

$master = array();
$socket = stream_socket_server("tcp://0.0.0.0:8000", $errno, $errstr);
if (!$socket) {
    echo "$errstr ($errno)<br />\n";
} else {
    $master[] = $socket;
    $read = $master;
    while (1) {
        $read = $master;
        $mod_fd = stream_select($read, $_w = NULL, $_e = NULL, 5);
        if ($mod_fd === FALSE) {
            break;
        }
        for ($i = 0; $i < $mod_fd; ++$i) {
            if ($read[$i] === $socket) {
                $conn = stream_socket_accept($socket);
                fwrite($conn, "Hello! The time is ".date("n/j/Y g:i a")."\n");
                $master[] = $conn;
            } else {
                $sock_data = fread($read[$i], 1024);
                var_dump($sock_data);
                if (strlen($sock_data) === 0) { // connection closed
                    $key_to_del = array_search($read[$i], $master, TRUE);
                    fclose($read[$i]);
                    unset($master[$key_to_del]);
                } else if ($sock_data === FALSE) {
                    echo "Something bad happened";
                    $key_to_del = array_search($read[$i], $master, TRUE);
                    unset($master[$key_to_del]);
                } else {
                    echo "The client has sent :"; var_dump($sock_data);
                    fwrite($read[$i], "You have sent :[".$sock_data."]\n");
                    fclose($read[$i]);
                     unset($master[array_search($read[$i], $master)]);
                }
            }
        }
    }
}
?>
stream_client.php:
<?php
$fp = stream_socket_client("tcp://127.0.0.1:8000", $errno, $errstr, 30);
if (!$fp) {
    echo "$errstr ($errno)<br />\n";
} else {
    fwrite($fp, "Aloha");
    while (!feof($fp)) {
        var_dump(fgets($fp, 1024));
    }
    fclose($fp);
}
?>

Thanks

down

peterjb at me dot com ¶

14 years ago


I had a horrible time trying to shove a TLS socket into an existing TCP program.  It appears to me that functions like stream_socket_recvfrom and stream_socket_sendto don't work with TLS/SSL (which may be obvious to PHP gurus...sorry if it is, I'm in a bit over my head here).

In the end I ended up doing all my IO with fread() and fwrite(), which solved all my problems.

down

Aurelien Marchand ¶

13 years ago


In the case of AF_UNIX sockets, note the named sockets that will be created respects your umask(). So if you wanted your named socket to be writeable to all, do umask(0) prior to calling stream_socket_server().

AM

down

Anonymous ¶

5 years ago


Some examples of socket server uses address 127.0.0.1 as below:

stream_socket_server("tcp://127.0.0.1:5353", $errno, $errorMessage);

While it works for localhost testing, when connecting to the socket server via external element, the IP should be "0.0.0.0" as below:

stream_socket_server("tcp://0.0.0.0:5353", $errno, $errorMessage);

root@server:~# netstat -anp | grep 5353
tcp        0      0 0.0.0.0:5353           0.0.0.0:*               LISTEN      26353/php

down

-1

Julien Picalausa ¶

15 years ago


You may have noticed that, unlike socket_listen, stream_socket_server doesn't have a backlog parameter. From the source code of php 5.2.9, it looks like the backlog parameter to the actual listen call is hardcoded to be 5. If this value doesn't suit your needs, you'll have to use the lower-level socket functions.

down

-4

Neil Munro ¶

18 years ago


If you want a high speed socket server, use the low-level sockets instead (socket_create/bind/listen). The stream_socket_server version appears to have internal fixed 8k buffers that will overflow if you don't keep up by reading.

This is a serious problem if you an application that reads the socket for messages and then, say, saves the result in a database. The delay while it is busy processing means you can't read the data in time unless you get involved in muti-threading.

With the the low-level functions, the OS quietly buffers TCP/IP packets so there is no problem (tested on Windows XP Professional).

add a note