PDO::setAttribute

(PHP 5 >= 5.1.0, PHP 7, PHP 8, PECL pdo >= 0.1.0)

PDO::setAttribute — Set an attribute

Descrição

public PDO::setAttribute(int $attribute, mixed $value): bool

Sets an attribute on the database handle. Some available generic attributes are listed below; some drivers may make use of additional driver specific attributes. Note that driver specific attributes must not be used with other drivers.

PDO::ATTR_CASE

Force column names to a specific case. Can take one of the following values:

PDO::CASE_LOWER: Force column names to lower case.
PDO::CASE_NATURAL: Leave column names as returned by the database driver.
PDO::CASE_UPPER: Force column names to upper case.

PDO::ATTR_ERRMODE

Error reporting mode of PDO. Can take one of the following values:

PDO::ERRMODE_SILENT: Only sets error codes.
PDO::ERRMODE_WARNING: Raises E_WARNING diagnostics.
PDO::ERRMODE_EXCEPTION: Throws PDOExceptions.

PDO::ATTR_ORACLE_NULLS

Nota: This attribute is available with all drivers, not just Oracle.

Determines if and how null and empty strings should be converted. Can take one of the following values:

PDO::NULL_NATURAL: No conversion takes place.
PDO::NULL_EMPTY_STRING: Empty strings get converted to null.
PDO::NULL_TO_STRING: null gets converted to an empty string.

PDO::ATTR_STRINGIFY_FETCHES

Whether to convert numeric values to strings when fetching. Takes a value of type bool: true to enable and false to disable.

PDO::ATTR_STATEMENT_CLASS

Set user-supplied statement class derived from PDOStatement. Requires array(string classname, array(mixed constructor_args)).

Cuidado

Cannot be used with persistent PDO instances.

PDO::ATTR_TIMEOUT

Specifies the timeout duration in seconds. Takes a value of type int.

Nota:
Not all drivers support this option, and its meaning may differ from driver to driver. For example, SQLite will wait for up to this time value before giving up on obtaining a writable lock, but other drivers may interpret this as a connection or a read timeout interval.

PDO::ATTR_AUTOCOMMIT

Nota: Only available for the OCI, Firebird, and MySQL drivers.

Whether to autocommit every single statement. Takes a value of type bool: true to enable and false to disable. By default, true.

PDO::ATTR_EMULATE_PREPARES

Nota: Only available for the OCI, Firebird, and MySQL drivers.

Whether enable or disable emulation of prepared statements. Some drivers do not support prepared statements natively or have limited support for them. If set to true PDO will always emulate prepared statements, otherwise PDO will attempt to use native prepared statements. In case the driver cannot successfully prepare the current query, PDO will always fall back to emulating the prepared statement.

PDO::MYSQL_ATTR_USE_BUFFERED_QUERY

Nota: Only available for the MySQL driver.

Whether to use buffered queries. Takes a value of type bool: true to enable and false to disable. By default, true.

PDO::ATTR_DEFAULT_FETCH_MODE

Set the default fetch mode. A description of the modes and how to use them is available in the PDOStatement::fetch() documentation.

Parâmetros

attribute: The attribute to modify.
value: The value to set the attribute, might require a specific type depending on the attribute.

Valor Retornado

Retorna true em caso de sucesso ou false em caso de falha.

Veja Também

PDO::getAttribute() - Recuperar um atributo da conexão com o banco de dados
PDOStatement::getAttribute() - Retrieve a statement attribute
PDOStatement::setAttribute() - Define um atributo na instrução

add a note

User Contributed Notes 12 notes

down

117

colinganderson [at] gmail [dot] com ¶

17 years ago


Because no examples are provided, and to alleviate any confusion as a result, the setAttribute() method is invoked like so:

setAttribute(ATTRIBUTE, OPTION);

So, if I wanted to ensure that the column names returned from a query were returned in the case the database driver returned them (rather than having them returned in all upper case [as is the default on some of the PDO extensions]), I would do the following:

<?php
// Create a new database connection.
$dbConnection = new PDO($dsn, $user, $pass);

// Set the case in which to return column_names.
$dbConnection->setAttribute(PDO::ATTR_CASE, PDO::CASE_NATURAL);
?>

Hope this helps some of you who learn by example (as is the case with me).

.Colin

down

yeboahnanaosei at gmail dot com ¶

7 years ago


This is an update to a note I wrote earlier concerning how to set multiple attributes when you create you PDO connection string.

You can put all the attributes you want in an associative array and pass that array as the fourth parameter in your connection string. So it goes like this: 
<?php
$options = [
    PDO::ATTR_ERRMODE => PDO::ERRMODE_EXCEPTION,
    PDO::ATTR_CASE => PDO::CASE_NATURAL,
    PDO::ATTR_ORACLE_NULLS => PDO::NULL_EMPTY_STRING
];

// Now you create your connection string
try {
    // Then pass the options as the last parameter in the connection string
    $connection = new PDO("mysql:host=$host; dbname=$dbname", $user, $password, $options);

    // That's how you can set multiple attributes
} catch(PDOException $e) {
    die("Database connection failed: " . $e->getMessage());
}
?>

down

yeboahnanaosei at gmail dot com ¶

7 years ago


Well, I have not seen it mentioned anywhere and thought its worth mentioning. It might help someone. If you are wondering whether you can set multiple attributes then the answer is yes.

You can do it like this:
try {
    $connection = new PDO("mysql:host=$host; dbname=$dbname", $user, $password);
    // You can begin setting all the attributes you want.
    $connection->setAttribute(PDO::ATTR_ERRMODE, PDO::ERRMODE_EXCEPTION);
    $connection->setAttribute(PDO::ATTR_CASE, PDO::CASE_NATURAL);
    $connection->setAttribute(PDO::ATTR_ORACLE_NULLS, PDO::NULL_EMPTY_STRING);

    // That's how you can set multiple attributes
}
catch(PDOException $e)
{
    die("Database connection failed: " . $e->getMessage());
}

I hope this helps somebody. :)

down

Anonymous ¶

3 years ago


Note that contrary to most PDO methods, setAttribute does not throw a PDOException when it returns false.

down

gregory dot szorc at gmail dot com ¶

17 years ago


It is worth noting that not all attributes may be settable via setAttribute().  For example, PDO::MYSQL_ATTR_MAX_BUFFER_SIZE is only settable in PDO::__construct().  You must pass PDO::MYSQL_ATTR_MAX_BUFFER_SIZE as part of the optional 4th parameter to the constructor.  This is detailed in http://bugs.php.net/bug.php?id=38015

down

steve at websmithery dot co dot uk ¶

7 years ago


For PDO::ATTR_EMULATE_PREPARES, the manual states a boolean value is required. However, when getAttribute() is used to check this value, an integer (1 or 0) is returned rather than true or false.

This means that if you are checking a PDO object is configured as required then

<?php
        // Check emulate prepares is off
        if ($pdo->getAttribute(\PDO::ATTR_EMULATE_PREPARES) !== false) {
            /* do something */
        }
?>

will always 'do something', regardless.

Either

<?php
        // Check emulate prepares is off
        if ($pdo->getAttribute(\PDO::ATTR_EMULATE_PREPARES) != false) {
            /* do something */
        }
?>

or

<?php
        // Check emulate prepares is off
        if ($pdo->getAttribute(\PDO::ATTR_EMULATE_PREPARES) !== 0) {
            /* do something */
        }
?>

is needed instead.

Also worth noting that setAttribute() does, in fact, accept an integer value if you want to be consistent.

down

antoyo ¶

13 years ago


There is also a way to specifie the default fetch mode :

<?php

$connection = new PDO($connection_string);

$connection->setAttribute(PDO::ATTR_DEFAULT_FETCH_MODE, PDO::FETCH_OBJ);

?>

down

-3

rob51 at mac dot com ¶

6 years ago


Where would I find the default values of attributes?

down

-7

guillaume at thug dot com ¶

7 years ago


function pdo_connect(){
  try {

      $pdo = new PDO('mysql:host=localhost;dbname='.DB_NAME, DB_USER, DB_PASS);
      $pdo->setAttribute(PDO::ATTR_ERRMODE, PDO::ERRMODE_EXCEPTION);     
      $pdo->setAttribute( PDO::ATTR_EMULATE_PREPARES, false );           
      $pdo->setAttribute(PDO::ATTR_DEFAULT_FETCH_MODE, PDO::FETCH_ASSOC);

  } catch (PDOException $e) {

      die("Error!: " . $e->getMessage() . "<br/>");

  }

  return $pdo;
}

down

-9

justinasu at gmail dot com ¶

9 years ago


in v5.5 PDO::MYSQL_ATTR_USE_BUFFERED_QUERY can only be set in PDO constructor, not by passing it into setAttribute. 
If you set it with setAttribute it will not work. getAttribute(PDO::MYSQL_ATTR_USE_BUFFERED_QUERY) will return 0.

down

-9

vstoykov at proab dot info ¶

7 years ago


I am using PHP 5.6 and MySQL 5.0 on GoDaddy.
When executing a query like this:
<?php
    $stmt = $this->PDO->query("SHOW CREATE TABLE table");
?>
I get:
Uncaught exception 'PDOException' with message 
'SQLSTATE[HY000]: General error: 2030 This command is not supported in the prepared statement protocol yet' 
After I added:
<?php
    $this->PDO->setAttribute(PDO::ATTR_EMULATE_PREPARES, true);
?>
the query was executed successfully.

down

-15

m dot leuffen at gmx dot de ¶

18 years ago


Hi,

if you are wondering about a size-bound (1 MB) on blob and text fields after upgrading to PHP5.1.4. You might try to increase this limit by using the setAttribute() method.

This will fail. Instead use the options array when instantiating the pdo:

$pdo = new PDO ("connection_settings", "user", "pass", array
(PDO::MYSQL_ATTR_MAX_BUFFER_SIZE=>1024*1024*50));

This should fix the problem and increase the limit to 50 MB.

Bye,
  Matthias

add a note