preg_replace

(PHP 4, PHP 5, PHP 7)

preg_replace — Perform a regular expression search and replace

Descrierea

Searches subject for matches to pattern and replaces them with replacement.

Parametri

pattern

The pattern to search for. It can be either a string or an array with strings.

Several PCRE modifiers are also available.

replacement

The string or an array with strings to replace. If this parameter is a string and the pattern parameter is an array, all patterns will be replaced by that string. If both pattern and replacement parameters are arrays, each pattern will be replaced by the replacement counterpart. If there are fewer elements in the replacement array than in the pattern array, any extra patterns will be replaced by an empty string.

replacement may contain references of the form \n or $n, with the latter form being the preferred one. Every such reference will be replaced by the text captured by the n'th parenthesized pattern. n can be from 0 to 99, and \0 or $0 refers to the text matched by the whole pattern. Opening parentheses are counted from left to right (starting from 1) to obtain the number of the capturing subpattern. Note that backslashes in string literals may require to be escaped.

When working with a replacement pattern where a backreference is immediately followed by another number (i.e.: placing a literal number immediately after a matched pattern), you cannot use the familiar \1 notation for your backreference. \11, for example, would confuse preg_replace() since it does not know whether you want the \1 backreference followed by a literal 1, or the \11 backreference followed by nothing. In this case the solution is to use ${1}1. This creates an isolated $1 backreference, leaving the 1 as a literal.

When using the deprecated e modifier, this function escapes some characters (namely ', ", \ and NULL) in the strings that replace the backreferences. This is done to ensure that no syntax errors arise from backreference usage with either single or double quotes (e.g. 'strlen(\'$1\')+strlen("$2")'). Make sure you are aware of PHP's string syntax to know exactly how the interpreted string will look.

subject

The string or an array with strings to search and replace.

If subject is an array, then the search and replace is performed on every entry of subject, and the return value is an array as well.

limit

The maximum possible replacements for each pattern in each subject string. Defaults to -1 (no limit).

count

If specified, this variable will be filled with the number of replacements done.

Valorile întoarse

preg_replace() returns an array if the subject parameter is an array, or a string otherwise.

If matches are found, the new subject will be returned, otherwise subject will be returned unchanged or null if an error occurred.

Erori/Excepții

As of PHP 5.5.0 E_DEPRECATED level error is emitted when passing in the "\e" modifier. As of PHP 7.0.0 using the "\e" modifier is an error; an E_WARNING is emitted in this case.

Exemple

Example #1 Using backreferences followed by numeric literals


<?php
$string = 'April 15, 2003';
$pattern = '/(\w+) (\d+), (\d+)/i';
$replacement = '${1}1,$3';
echo preg_replace($pattern, $replacement, $string);
?>

Exemplul de mai sus va afișa:

April1,2003

Example #2 Using indexed arrays with preg_replace()


<?php
$string = 'The quick brown fox jumps over the lazy dog.';
$patterns = array();
$patterns[0] = '/quick/';
$patterns[1] = '/brown/';
$patterns[2] = '/fox/';
$replacements = array();
$replacements[2] = 'bear';
$replacements[1] = 'black';
$replacements[0] = 'slow';
echo preg_replace($patterns, $replacements, $string);
?>

Exemplul de mai sus va afișa:

The bear black slow jumps over the lazy dog.

By ksorting patterns and replacements, we should get what we wanted.


<?php
ksort($patterns);
ksort($replacements);
echo preg_replace($patterns, $replacements, $string);
?>

Exemplul de mai sus va afișa:

The slow black bear jumps over the lazy dog.

Example #3 Replacing several values


<?php
$patterns = array ('/(19|20)(\d{2})-(\d{1,2})-(\d{1,2})/',
                   '/^\s*{(\w+)}\s*=/');
$replace = array ('\3/\4/\1\2', '$\1 =');
echo preg_replace($patterns, $replace, '{startDate} = 1999-5-27');
?>

Exemplul de mai sus va afișa:

$startDate = 5/27/1999

Example #4 Strip whitespace

This example strips excess whitespace from a string.


<?php
$str = 'foo   o';
$str = preg_replace('/\s\s+/', ' ', $str);
// This will be 'foo o' now
echo $str;
?>

Example #5 Using the count parameter


<?php
$count = 0;

echo preg_replace(array('/\d/', '/\s/'), '*', 'xp 4 to', -1 , $count);
echo $count; //3
?>

Exemplul de mai sus va afișa:

xp***to
3

Note

Notă:
When using arrays with pattern and replacement, the keys are processed in the order they appear in the array. This is not necessarily the same as the numerical index order. If you use indexes to identify which pattern should be replaced by which replacement, you should perform a ksort() on each array prior to calling preg_replace().

A se vedea și

PCRE Patterns
preg_quote() - Quote regular expression characters
preg_filter() - Perform a regular expression search and replace
preg_match() - Perform a regular expression match
preg_replace_callback() - Perform a regular expression search and replace using a callback
preg_split() - Split string by a regular expression
preg_last_error() - Returns the error code of the last PCRE regex execution

add a note

User Contributed Notes 9 notes

down

766

arkani at iol dot pt ¶

15 years ago


Because i search a lot 4 this:

The following should be escaped if you are trying to match that character

\ ^ . $ | ( ) [ ]
* + ? { } ,

Special Character Definitions
\ Quote the next metacharacter
^ Match the beginning of the line
. Match any character (except newline)
$ Match the end of the line (or before newline at the end)
| Alternation
() Grouping
[] Character class
* Match 0 or more times
+ Match 1 or more times
? Match 1 or 0 times
{n} Match exactly n times
{n,} Match at least n times
{n,m} Match at least n but not more than m times
More Special Character Stuff
\t tab (HT, TAB)
\n newline (LF, NL)
\r return (CR)
\f form feed (FF)
\a alarm (bell) (BEL)
\e escape (think troff) (ESC)
\033 octal char (think of a PDP-11)
\x1B hex char
\c[ control char
\l lowercase next char (think vi)
\u uppercase next char (think vi)
\L lowercase till \E (think vi)
\U uppercase till \E (think vi)
\E end case modification (think vi)
\Q quote (disable) pattern metacharacters till \E
Even More Special Characters
\w Match a "word" character (alphanumeric plus "_")
\W Match a non-word character
\s Match a whitespace character
\S Match a non-whitespace character
\d Match a digit character
\D Match a non-digit character
\b Match a word boundary
\B Match a non-(word boundary)
\A Match only at beginning of string
\Z Match only at end of string, or before newline at the end
\z Match only at end of string
\G Match only where previous m//g left off (works only with /g)

down

nik at rolls dot cc ¶

11 years ago


To split Pascal/CamelCase into Title Case (for example, converting descriptive class names for use in human-readable frontends), you can use the below function:

<?php
function expandCamelCase($source) {
  return preg_replace('/(?<!^)([A-Z][a-z]|(?<=[a-z])[^a-z]|(?<=[A-Z])[0-9_])/', ' $1', $source);
}
?>

Before:
  ExpandCamelCaseAPIDescriptorPHP5_3_4Version3_21Beta
After:
  Expand Camel Case API Descriptor PHP 5_3_4 Version 3_21 Beta

down

bublifuk at mailinator dot com ¶

6 years ago


A delimiter can be any ASCII non-alphanumeric, non-backslash, non-whitespace character:  !"#$%&'*+,./:;=?@^_`|~-  and  ({[<>]})

down

ismith at nojunk dot motorola dot com ¶

17 years ago


Be aware that when using the "/u" modifier, if your input text contains any bad UTF-8 code sequences, then preg_replace will return an empty string, regardless of whether there were any matches.

This is due to the PCRE library returning an error code if the string contains bad UTF-8.

down

php-comments-REMOVE dot ME at dotancohen dot com ¶

16 years ago


Below is a function for converting Hebrew final characters to their
normal equivelants should they appear in the middle of a word.
The /b argument does not treat Hebrew letters as part of a word,
so I had to work around that limitation.

<?php

$text="עברית מבולגנת";

function hebrewNotWordEndSwitch ($from, $to, $text) {
   $text=
    preg_replace('/'.$from.'([א-ת])/u','$2'.$to.'$1',$text);
   return $text;
}

do {
   $text_before=$text;
   $text=hebrewNotWordEndSwitch("ך","כ",$text);
   $text=hebrewNotWordEndSwitch("ם","מ",$text);
   $text=hebrewNotWordEndSwitch("ן","נ",$text);
   $text=hebrewNotWordEndSwitch("ף","פ",$text);
   $text=hebrewNotWordEndSwitch("ץ","צ",$text);
}   while ( $text_before!=$text );

print $text; // עברית מסודרת!

?>

The do-while is necessary for multiple instances of letters, such
as "אנני" which would start off as "אןןי". Note that there's still the
problem of acronyms with gershiim but that's not a difficult one
to solve. The code is in use at http://gibberish.co.il which you can
use to translate wrongly-encoded Hebrew, transliterize, and some
other Hebrew-related functions.

To ensure that there will be no regular characters at the end of a
word, just convert all regular characters to their final forms, then
run this function. Enjoy!

down

me at perochak dot com ¶

13 years ago


If you would like to remove a tag along with the text inside it then use the following code.



<?php

preg_replace('/(<tag>.+?)+(<\/tag>)/i', '', $string);

?>



example

<?php $string='<span class="normalprice">55 PKR</span>'; ?>



<?php

$string = preg_replace('/(<span class="normalprice">.+?)+(<\/span>)/i', '', $string);

?>



This will results a null or empty string.



<?php

$string='My String <span class="normalprice">55 PKR</span>';



$string = preg_replace('/(<span class="normalprice">.+?)+(<\/span>)/i', '', $string);

?>



This will results a " My String"

down

-1

sternkinder at gmail dot com ¶

17 years ago


From what I can see, the problem is, that if you go straight and substitute all 'A's wit 'T's you can't tell for sure which 'T's to substitute with 'A's afterwards. This can be for instance solved by simply replacing all 'A's by another character (for instance '_' or whatever you like), then replacing all 'T's by 'A's, and then replacing all '_'s (or whatever character you chose) by 'A's:



<?php

$dna = "AGTCTGCCCTAG";

echo str_replace(array("A","G","C","T","_","-"), array("_","-","G","A","T","C"), $dna); //output will be TCAGACGGGATC

?>



Although I don't know how transliteration in perl works (though I remember that is kind of similar to the UNIX command "tr") I would suggest following function for "switching" single chars:



<?php

function switch_chars($subject,$switch_table,$unused_char="_") {

    foreach ( $switch_table as $_1 => $_2 ) {

        $subject = str_replace($_1,$unused_char,$subject);

        $subject = str_replace($_2,$_1,$subject);

        $subject = str_replace($unused_char,$_2,$subject);

    }

    return $subject;

}



echo switch_chars("AGTCTGCCCTAG", array("A"=>"T","G"=>"C")); //output will be TCAGACGGGATC

?>

down

-1

mail at johanvandemerwe dot nl ¶

5 years ago


Sample for replacing bracketed short-codes

The used short-codes are purely used for educational purposes for they could be shorter as in 'italic' to 'i' or 'bold' to 'b'.

Sample text
----
This sample shows how to have [italic]italic[/italic], [bold]bold[/bold] and [underline]underlined[/underline] and [strikethrough]striked[/striketrhough] text. 

with this function:

<?php
function textDecoration($html)
{
    $patterns = [
        '/\[(italic)\].*?\[\/\1\] ?/',
        '/\[(bold)\].*?\[\/\1\] ?/',
        '/\[(underline)\].*?\[\/\1\] ?/'
    ];

    $replacements = [
        '<i>$1</i>',
        '<strong>$1</strong>',
        '<u>$1</u>'
    ];

    return preg_replace($patterns, $replacements, $html);
}

$html = textDecoration($html);

echo $html; // or return
?>

results in:
----
This sample shows how to have <i>italic</i>, <b>bold</b> and <u>underlined</u> and [strikethrough]striked[/striketrhough] text.

Notice!
There is no [strikethrough]striked[/striketrhough] fallback in the patterns and replacements array

down

-3

razvan_bc at yahoo dot com ¶

2 years ago


How to replace all comments inside code without remove crln  = \r\n or cr \r each line?

<?php
$txt_target=<<<t1
this;//    dsdsds
    nope
    
/*
    ok
    */
is;huge
/*text bla*/
    /*bla*/
 
t1;

/*
=======================================================================
expected result:
=======================================================================
this;
    nope

is;huge
=======================================================================
visualizing in a hex viewer .. to_check_with_a_hex_viewer.txt ...
 t  h  i  s  ; LF TAB n  o  p  e CR LF CR LF  i  s  ;  h  u  g  e CR LF
74 68 69 73 3b 0a 09 6e 6f 70 65 0d 0a 0d 0a 69 73 3b 68 75 67 65 0d 0a
I used F3 (viewer + options 3: hex) in mythical TOTAL COMMANDER!
=======================================================================
*/

echo '<hr><pre>';
echo  $txt_target;
echo '</pre>';

//  a single line '//' comments
$txt_target = preg_replace('![ \t]*//.*[ \t]*!', '', $txt_target);

//  /* comment */
$txt_target = preg_replace('/\/\*([^\/]*)\*\/(\s+)/smi', '', $txt_target);
echo '<hr><pre>';
echo  $txt_target;
echo '</pre><hr>';

file_put_contents('to_check_with_a_hex_viewer.txt',$txt_target);

?>

add a note