Edit Report a Bug

win32_set_service_status

(PECL win32service >=0.1.0)

win32_set_service_status — Update the service status

Descrierea

win32_set_service_status ( int $status , int $checkpoint = 0 ) : void

Informs the SCM of the current status of a running service. This call is only valid for a running service process.

Precauţie

Since version 0.2.0, this function work only in "cli" SAPI. On other SAPI this function is disabled.

Parametri

status

The service status code, one of WIN32_SERVICE_RUNNING, WIN32_SERVICE_STOPPED, WIN32_SERVICE_STOP_PENDING, WIN32_SERVICE_START_PENDING, WIN32_SERVICE_CONTINUE_PENDING, WIN32_SERVICE_PAUSE_PENDING, WIN32_SERVICE_PAUSED.

checkpoint

The checkpoint value the service increments periodically to report its progress during a lengthy start, stop, pause, or continue operation. For example, the service should increment this value as it completes each step of its initialization when it is starting up.

The checkpoint is only valid when the status is one of WIN32_SERVICE_STOP_PENDING, WIN32_SERVICE_START_PENDING, WIN32_SERVICE_CONTINUE_PENDING or WIN32_SERVICE_PAUSE_PENDING.

Valorile întoarse

Nu este întoarsă nici o valoare.

Prior to version 1.0.0, Întoarce WIN32_NO_ERROR în caz de succes, false în caz că este vre-o problemă cu parametrii, sau un Cod de Eroare Win32 în caz de eșec.

Erori/Excepții

Prior to version 1.0.0, if the SAPI is not "cli", this function emits an E_ERROR level error.

As of version 1.0.0, will throw a Win32ServiceException if SAPI is not "cli"

Istoricul schimbărilor

Versiune	Descriere
PECL win32service 1.0.0	Throws a ValueError on invalid data in parameters, previously `false` was returned.
PECL win32service 1.0.0	Throws a Win32ServiceException on error, previously a Win32 Error Code was returned.
PECL win32service 1.0.0	The return type is now void, previously it was mixed.
PECL win32service 0.2.0	This function works only in the `"cli"` SAPI.

A se vedea și

win32_start_service_ctrl_dispatcher() - Registers the script with the SCM, so that it can act as the service with the given name
win32_get_last_control_message() - Returns the last control message that was sent to this service
win32_set_service_exit_mode() - Define or return the exit mode for the current running service
win32_set_service_exit_code() - Define or return the exit code for the current running service
Win32Service Service Status Constants

add a note

User Contributed Notes 2 notes

down

m dot hald at surfto dot ch ¶

16 years ago


On my Machine (Win XP SP2) the function "win32_get_last_control_message" never returns 4 so i will have to reply to 0 also.

finally after mixing several examples i now have a version working woithout filling my event log with errors:

<?php

/*
 * PHP SAMPLE TEMPLATE
 */

/*
 * APP MAIN FUNCTION
 * Called each second after the function last time finished
 * Should not take longer than max 20 seconds to execute
 * ELSE you should call NTServiceResponder(); at least each 20 secs
 * WARNING: NTServiceResponder will exit; if there was a STOP request
 */
function Service_Main()
{
    // YOU APPLICATION CODE HERE !!!
    sleep(1); // dummy something
}

/********************************************************************
 *
 * SERVICE CONTROLLING
 *
 ********************************************************************/

$SERVICE_NAME = "phptestservice";
$SERVICE_DISPLAY = "Test Service with PHP";

// so u can get: $SERVICE_PATH_PARTS["dirname"] $SERVICE_PATH_PARTS["basename"]  $SERVICE_PATH_PARTS["extension"]
$SERVICE_PATH_PARTS = pathinfo(__FILE__);

$SERVICE_PARAMS = " run";

    if (!isset($argv[1]))
    {
        die("this application need to be installed as a service.\n run with param install");
    }

    if ($argv[1] == 'install')
    {
        $x = win32_create_service(array(
                                        'service' => $SERVICE_NAME,
                                        'display' => $SERVICE_DISPLAY,
                                        'params' =>  __FILE__ . $SERVICE_PARAMS,
                                        //'path' =>  $SERVICE_PATH_PARTS["dirname"] . '\php.exe'
                                        ));
        debug_zval_dump($x);
        exit;
    }
    else if ($argv[1] == 'uninstall')
    {
        $x = win32_delete_service('dummyphp');
        debug_zval_dump($x);
        exit;
    }
    else if ($argv[1] != 'run')
    {
        die("bogus args, needs to run as service");
    }

    // Connect to service dispatcher and notify that startup was successful
    if (!win32_start_service_ctrl_dispatcher($SERVICE_NAME)) die('Could not connect to service :'.$SERVICE_NAME);
    win32_set_service_status(WIN32_SERVICE_RUNNING);

    // Main Server Loop
    while (1)
    {
        NTServiceResponder();

        // Main script goes here
        Service_Main();

        sleep(1); // at least 1 sec delay per loop
    }
    win32_set_service_status(WIN32_SERVICE_STOPPED);

/*
 * Response to NTServiceRequests
 */
function NTServiceResponder()
{

    switch (win32_get_last_control_message())
    {
    case 0: // PATCH for: seems never to go to 4 (WIN32_SERVICE_CONTROL_INTERROGATE)
        win32_set_service_status(WIN32_SERVICE_RUNNING);
        return TRUE;
        break;
    case WIN32_SERVICE_CONTROL_CONTINUE:
        return TRUE; // "Continue"
    case WIN32_SERVICE_CONTROL_INTERROGATE:
        win32_set_service_status(WIN32_SERVICE_RUNNING);
        return TRUE; // Respond with status
    case WIN32_SERVICE_CONTROL_STOP:
        win32_set_service_status(WIN32_SERVICE_STOPPED);
        exit; // Terminate script
    default:
        win32_set_service_status(WIN32_ERROR_CALL_NOT_IMPLEMENTED); // Add more cases to handle other service calls
    }

    return FALSE;
}

?>

down

paul_nelson57071 at yahoo dot com ¶

14 years ago


So after much searching I finally found all the peices to make a working windows service & server including:
- Installing & Uninstalling the service
- Starting & Stopping the Service
- Actually running a basic Server
- Responding to windows Service to Stop/Start/Restart 

I hope you find this useful! I did this using PHP 5.2 and the PECL library for 5.2 (PHP 5.3 at the time does not have a PECL Library compiled for it)

<?php
    //Service Settings
    $Service = 'MyServiceFinal';
    $Display = 'My PHP Service';
    
    //Server Settings
    $host = '127.0.0.1';        //Bind to IP #
    $port = 23;                            //On port #
    $max = 20;                            //Maximum Clients
    
    
    //Exit if no start-up argument is passed
    if (!isset($argv[1])){ShowHelp(); exit;}
    
    //Create Windows Service
    if ($argv[1] == 'install') {                         
    $x = win32_create_service(array(
        'service' => $Service,
        'display' => $Service,
        'params' => __file__ . ' run',
        'path' => 'c:\\php\\php.exe',
    ));
    debug_zval_dump($x);
    echo "Service Installed\n\n";
    exit;
    
  //Remove Windows Service
    } else if ($argv[1] == 'uninstall') {
        $x = win32_delete_service($Service);
        debug_zval_dump($x);
        echo "Service Removed\n\n";
        exit;
    
  //Start Windows Service
    } elseif($argv[1] == "start") {
      $x = win32_start_service($Service);
      debug_zval_dump($x);
      echo "Service Started\n\n";
      exit;
      
    //Stop Windows Service
    } elseif($argv[1] == "stop") {
      $x = win32_stop_service($Service);
      debug_zval_dump($x);
      echo "Service Stopped\n\n";
      exit;
      
    //Unkown Command
    } else if ($argv[1] != 'run') {
        ShowHelp(); exit();
    }

//Tell windows the service has started...
if (!win32_start_service_ctrl_dispatcher($Service)) die("Could not connect to service : $Service");
win32_set_service_status(WIN32_SERVICE_RUNNING);

// No timeouts, flush content immediatly
set_time_limit(0);
ob_implicit_flush();

//Server Loop
while (1) {
    usleep(500);
    
    //Handle Windows Service Request
    switch (win32_get_last_control_message()) {
        case WIN32_SERVICE_CONTROL_CONTINUE: break; // Continue server routine
        case WIN32_SERVICE_CONTROL_INTERROGATE: win32_set_service_status(WIN32_NO_ERROR); break; // Respond with status
        case WIN32_SERVICE_CONTROL_STOP: win32_set_service_status(WIN32_SERVICE_STOPPED); exit; // Terminate script
        default: win32_set_service_status(WIN32_ERROR_CALL_NOT_IMPLEMENTED); // Add more cases to handle other service calls
    }
    //Acutal Server Code

}

//Clean up and Exit
win32_set_service_status(WIN32_SERVICE_STOPPED);
exit;

//*************** FUNCTIONS ***************
function ShowHelp(){
    echo "Usage:
    install:\t installs servce
    uninstall:\t deletes service
    start:\t\t Start the windows service
    stop:\t\t Stops the windows service
    run:\t\t called by CMS to run the service
    
For information on code numbers type 'net helpmsg xxxx'
EXAMPEL: 'net helpmsg 1072'
    
    ";
}
?>

add a note