Enable SNI (Server Name Indication):
PEM must be contains certificate and private key.
<?php
$context = stream_context_create([
'ssl' => [
'SNI_enabled' => true,
'SNI_server_certs' => [
'host1.com' => '/path/host1.com.pem',
'host2.com' => '/path/host2.com.pem',
],
]
]);
?>
Опции контекста SSL
Опции контекста SSL — Список опций контекста SSL
Описание
Опции контекста для протоколов ssl:// и tls://
Список изменений
| Версия | Описание |
|---|---|
| 7.2.0 |
Добавлен security_level. Требуется OpenSSL >= 1.1.0.
|
Примечания
Замечание: Так как
ssl://- это нижележащий транспортный протокол для обёртокhttps://иftps://, то любые опции контекста, которые применяются кssl://будут также применяться кhttps://иftps://.
Замечание: Чтобы была доступна возможность указания имени сервера (SNI, Server Name Indication), PHP должен быть скомпилирован с OpenSSL 0.9.8j или более поздней. Используйте константу
OPENSSL_TLSEXT_SERVER_NAMEчтобы определить, поддерживается ли SNI.
add a note
User Contributed Notes 9 notes
tianyiw at vip dot qq dot com ¶
1 year ago
website at meezaan dot net ¶
8 years ago
There is also a crypto_type context. In older versions this was crypto_method. This is referenced on http://php.net/manual/en/function.stream-socket-enable-crypto.php
consatangmail dot com ¶
2 years ago
recommended use "ssl://" transport.
in php 5.5 ~ 7.1
ssl:// transport = ssl_v2|ssl_v3|tls_v1.0|tls_v1.1|tls_v1.2
tls:// transport = tls_v1.0
after 7.2 ssl:// and tls:// transports is same
php 7.2 ~ 7.3 = tls_v1.0|tls_v1.1|tls_v1.2
php 7.4 ~ 8.1 = tls_v1.0|tls_v1.1|tls_v1.2|tls_v1.3
Charlie ¶
7 years ago
I am unable to load a PEM that was generated with the stunnel tools. However, I am able to use PHP calls to generate a working PEM that is recognized both by stunnel and php, as outlined here:
http://www.devdungeon.com/content/how-use-ssl-sockets-php
This code fragment is now working for me, and with stunnel verify=4, both sides confirm the fingerprint. Oddly, if "tls://" is set below, then TLSv1 is forced, but using "ssl://" allows TLSv1.2:
$stream_context = stream_context_create([ 'ssl' => [
'local_cert' => '/path/to/key.pem',
'peer_fingerprint' => openssl_x509_fingerprint(file_get_contents('/path/to/key.crt')),
'verify_peer' => false,
'verify_peer_name' => false,
'allow_self_signed' => true,
'verify_depth' => 0 ]]);
$fp = stream_socket_client('ssl://ssl.server.com:12345',
$errno, $errstr, 30, STREAM_CLIENT_CONNECT, $stream_context);
fwrite($fp, "foo bar\n");
while($line = fgets($fp, 8192)) echo $line;
Botjan kufca ¶
14 years ago
CN_match works contrary to intuitive thinking. I came across this when I was developing SSL server implemented in PHP. I stated (in code):
- do not allow self signed certs (works)
- verify peer certs against CA cert (works)
- verify the client's CN against CN_match (does not work), like this:
stream_context_set_option($context, 'ssl', 'CN_match', '*.example.org');
I presumed this would match any client with CN below .example.org domain.
Unfortunately this is NOT the case. The option above does not do that.
What it really does is this:
- it takes client's CN and compares it to CN_match
- IF CLIENT's CN CONTAINS AN ASTERISK like *.example.org, then it is matched against CN_match in wildcard matching fashion
Examples to illustrate behaviour:
(CNM = server's CN_match)
(CCN = client's CN)
- CNM=host.example.org, CCN=host.example.org ---> OK
- CNM=host.example.org, CCN=*.example.org ---> OK
- CNM=.example.org, CCN=*.example.org ---> OK
- CNM=example.org, CCN=*.example.org ---> ERROR
- CNM=*.example.org, CCN=host.example.org ---> ERROR
- CNM=*.example.org, CCN=*.example.org ---> OK
According to PHP sources I believe that the same applies if you are trying to act as Client and the server contains a wildcard certificate. If you set CN_match to myserver.example.org and server presents itself with *.example.org, the connection is allowed.
Everything above applies to PHP version 5.2.12.
I will supply a patch to support CN_match starting with asterisk.
gabri dot ns at gmail dot com ¶
4 years ago
i usually download root CA certificate from https://curl.haxx.se/docs/caextract.html then put it as 'cafile' and it work almost all of the time.
the only problem i'v ever found is when the server does not properly sending intermediete CA certificate, then, you must add it manually to the file.
borbas dot geri at gmail dot com ¶
10 years ago
I used this for Apple Push Notification Service.
Passed in a local certificate filename `cert.pem` trough local_cert option.
Worked fine, when invoked the script directly.
But when I included/required the script from a different location, it stopped working, without any explicit error message.
Resolved by passed in the full path for the file `<FullPathTo>cert.pem`.
mechtecs at gmail dot com ¶
6 years ago
If you want to validate the server against a local certificate, which you already saved, to further validate the target server, you have to use a fullchain.pem. Then the verify_peer option will work. So just get the server certificate, and search the root CA's pem's and copy everything into a single file. For example:
My certificate has the "GeoTrust TLS RSA CA G1" certificate in the chain, so you google that string. Go to the official digicert Geotrust page and download the "GeoTrustTLSRSACAG1.crt" certificate. Then you can use the following command to convert it into the pem format:
openssl x509 -inform DER -in GeoTrustTLSRSACAG1.crt -out GeoTrustTLSRSACAG1.crt.pem -outform PEM
Charlie ¶
7 years ago
It appears that "allow_self_signed" does not and cannot apply to the local_cert option.
The stunnel verify=4 option, which verifies but ignores a CA, has no analog in these settings, which is unfortunate.
Even more perplexingly, while the "openssl verify -CAfile" is successful, PHP appears unable to use the new ca/crt pair in any configuration.
I did actually link my PHP against a copy of LibreSSL 2.3.8, but PHP oddly is unable to use TLS1.1 or 1.2. It does, however, enable EC secp521r1 (of which my native OpenSSL 0.9.8e is incapable).
