snmprealwalk indexes the values using the oid instead of an integer. This is useful when you need data that is contained in the oid as well as the value.
Here's an example for retrieving and printing vlan info:
//
// I have collected the vlan identifiers earlier from the 3com mib and they are stored in the $vlan table.
//
for($n=0;$n<count($vlan);$n++){
print $vlan[$n][id]." ".$vlan[$n][name]."<br>\n";
$ifStackStatusTable=@snmprealwalk($switch, $community, ".1.3.6.1.2.1.31.1.2.1.3.".$vlan[$n][id]); // ifMIB.ifMIBObjects.ifStackTable.ifStackEntry.ifStackStatus
for(reset($ifStackStatusTable); $port = key($ifStackStatusTable); next($ifStackStatusTable)){
print "$port=$ifStackStatusTable[$port]<br>";
}
snmprealwalk
(PHP 4, PHP 5, PHP 7, PHP 8)
snmprealwalk — Возвращает все объекты, включая их идентификатор
Описание
snmprealwalk(
string
string
array|string
int
int
): array|false
string
$hostname,string
$community,array|string
$object_id,int
$timeout = -1,int
$retries = -1): array|false
Функция snmprealwalk() используется для обхода объектов SNMP,
начиная с object_id и возвращает не только их значения, но и их идентификаторы объектов.
Список параметров
-
hostname -
Имя хоста агента (сервера) SNMP.
-
community -
Read-сообщество.
-
object_id -
Идентификатор объекта SNMP, который предшествует желаемому.
-
timeout -
Время ожидания в микросекундах.
-
retries -
Количество повторных попыток при истечении времени ожидания.
Возвращаемые значения
Возвращает ассоциативный массив идентификаторов объектов SNMP и их значений в случае успешного выполнения или false в случае возникновения ошибки.
В случае возникновения ошибки выводит ошибку уровня E_WARNING.
Примеры
Пример #1 Пример использования snmprealwalk()
<?php
print_r(snmprealwalk("localhost", "public", "IF-MIB::ifName"));
?>Вышеупомянутый пример выведет что-то вроде:
Array
(
[IF-MIB::ifName.1] => STRING: lo
[IF-MIB::ifName.2] => STRING: eth0
[IF-MIB::ifName.3] => STRING: eth2
[IF-MIB::ifName.4] => STRING: sit0
[IF-MIB::ifName.5] => STRING: sixxs
)
add a note
User Contributed Notes 7 notes
Lars Troen ¶
21 years ago
Anonymous ¶
16 years ago
To check if there were any results found you have to use the empty() function. The count() function always returns a number 1 or larger.
$walk_result = snmprealwalk($machine_ip, $community, $snmpcodes['interface_names']);
if (empty($walk_result)) {
print "No network interfaces found.<br>\n";
exit(0);
}
scot at indievisible dot org ¶
18 years ago
Since PHP doesn't have a nice snmptable-like function... here is a quick-and-dirty hack that works for me. Works on complete and sparse tables. The example oids are for the route (complete) and interface (often sparse) tables.
<?php
$a = snmptable("10.1.1.1", "public", ".1.3.6.1.2.1.4.21") or die("error");
print_r($a);
$a = snmptable("10.1.1.1", "public", ".1.3.6.1.2.1.2.2") or die("error");
print_r($a);
function snmptable($host, $community, $oid) {
// TODO: get original state and restore at bottom
snmp_set_oid_numeric_print(TRUE);
snmp_set_quick_print(TRUE);
snmp_set_enum_print(TRUE);
$retval = array();
$raw = snmprealwalk($host, $community, $oid) or die("snmptable: unable to walk OID $oid");
$prefix_length = 0;
foreach ($raw as $key => $value) {
if ($prefix_length == 0) {
// don't just use $oid's length since it may be non-numeric
$prefix_elements = count(explode('.',$oid));
$tmp = '.' . strtok($key, '.');
while ($prefix_elements > 1) {
$tmp .= '.' . strtok('.');
$prefix_elements--;
}
$tmp .= '.';
$prefix_length = strlen($tmp);
}
$key = substr($key, $prefix_length);
$index = explode('.', $key, 2);
isset($retval[$index[1]]) or $retval[$index[1]] = array();
isset($firstrow) or $firstrow = $index[1];
$retval[$index[1]][$index[0]] = $value;
}
// check for holes in the table and fill them in
foreach ($retval[$firstrow] as $key => $tmp) {
foreach($retval as $check => $tmp2) {
if (! isset($retval[$check][$key])) {
$retval[$check][$key] = '';
}
}
}
return($retval);
}
?>
Stephen Cope ¶
20 years ago
Here's a way to find the uptime and number of users on a machine. (Note that uptime is the uptime of the snmpd daemon, which should be fairly close to the uptime for the host.)
<?php
$state = snmprealwalk($host, "public", ".1.3.6.1.2.1.25.1", 50, 1);
$uptime = ereg_replace("^.*\) ([0-9]+ .*):[0-9][0-9]\.[0-9]{2}.*$", "\\1", $state['host.hrSystem.hrSystemUptime.0']);
$users = (int)ereg_replace("Gauge32: ", "", $state['host.hrSystem.hrSystemNumUsers.0']);
printf('<div class="machine"><dt>%s</dt><dd>%s</dd>', $host, $desc);
printf('<dd>up %s</dd>', $uptime);
if ( $users ) printf('<dd>%d user%s</dd>', $users, ($users > 1) ? 's' : '');
printf('</div>');
?>
aleksander dot sztramski at kpsi dot pl ¶
15 years ago
If you wish to use version 2c or 3, use the following functions:
snmp v2c functions:
snmp2_get (string host, string community, string object_id [, int timeout [, int retries]])
snmp2_getnext (string host, string community, string object_id [, int timeout [, int retries]])
snmp2_walk (string host, string community, string object_id [, int timeout [, int retries]])
snmp2_real_walk (string host, string community, string object_id [, int timeout [, int retries]])
snmp2_set (string host, string community, string object_id, string type, mixed value [, int timeout [, int retries]])
snmp v3 functions:
snmp3_get (string host, string sec_name, string sec_level, string auth_protocol, string auth_passphrase, string priv_pr)
snmp3_getnext (string host, string sec_name, string sec_level, string auth_protocol, string auth_passphrase, string pri)
snmp3_walk (string host, string sec_name, string sec_level, string auth_protocol, string auth_passphrase, string priv_p)
snmp3_real_walk (string host, string sec_name, string sec_level, string auth_protocol, string auth_passphrase, string p)
snmp3_set (string host, string sec_name, string sec_level, string auth_protocol, string auth_passphrase, string priv_pr)
railson at amixsi dot com dot br ¶
18 years ago
Attention: timeout is in microseconds (multiply by 1,000,000 for seconds)
scot at indievisible dot org ¶
18 years ago
Some improvements based on testing a lot of OIDs on a lot of devices.
<?php
function snmptable($host, $community, $oid) {
// TODO: get original state and restore at bottom
snmp_set_oid_numeric_print(TRUE);
snmp_set_quick_print(TRUE);
snmp_set_enum_print(TRUE);
$retval = array();
$raw = snmprealwalk($host, $community, $oid);
if (count($raw) == 0) return ($retval); // no data
$prefix_length = 0;
$largest = 0;
foreach ($raw as $key => $value) {
if ($prefix_length == 0) {
// don't just use $oid's length since it may be non-numeric
$prefix_elements = count(explode('.',$oid));
$tmp = '.' . strtok($key, '.');
while ($prefix_elements > 1) {
$tmp .= '.' . strtok('.');
$prefix_elements--;
}
$tmp .= '.';
$prefix_length = strlen($tmp);
}
$key = substr($key, $prefix_length);
$index = explode('.', $key, 2);
isset($retval[$index[1]]) or $retval[$index[1]] = array();
if ($largest < $index[0]) $largest = $index[0];
$retval[$index[1]][$index[0]] = $value;
}
if (count($retval) == 0) return ($retval); // no data
// fill in holes and blanks the agent may "give" you
foreach($retval as $k => $x) {
for ($i = 1; $i <= $largest; $i++) {
if (! isset($retval[$k][$i])) {
$retval[$k][$i] = '';
}
}
ksort($retval[$k]);
}
return($retval);
}
?>
