socket_set_option

(PHP 4 >= 4.3.0, PHP 5, PHP 7, PHP 8)

socket_set_option — Устанавливает опции для сокета

Описание

socket_set_option(
    Socket $socket,
    int $level,
    int $option,
    array|string|int $value
): bool

Функция socket_set_option() устанавливает опцию указанную в параметре option, на уровне протокола level, в значение, указанное параметром value для сокета socket.

Список параметров

socket: Экземпляр Socket, созданный при помощи функции socket_create() или socket_accept().
level: Параметр level указывает уровень протокола, на котором используется опция. Например, чтобы установить опции на уровне сокета, параметр level должен быть установлен в SOL_SOCKET. Другие уровни, такие как TCP, можно использовать, указав номер протокола этого уровня. Номер протоколов можно найти с помощью функции getprotobyname().
option: Возможные опции для сокета те же самые, как и для функции socket_get_option().
value: Значение опции.

Возвращаемые значения

Возвращает true в случае успешного выполнения или false в случае возникновения ошибки.

Список изменений

Версия	Описание
8.0.0	`socket` теперь экземпляр класса Socket; ранее был ресурсом (resource).

Примеры

Пример #1 Пример использования socket_set_option()

<?php
$socket = socket_create(AF_INET, SOCK_STREAM, SOL_TCP);

if (!is_resource($socket)) {
    echo 'Не могу создать сокет: '. socket_strerror(socket_last_error()) . PHP_EOL;
}

if (!socket_set_option($socket, SOL_SOCKET, SO_REUSEADDR, 1)) {
    echo 'Не могу установить опцию на сокете: '. socket_strerror(socket_last_error()) . PHP_EOL;
}

if (!socket_bind($socket, '127.0.0.1', 1223)) {
    echo 'Не могу привязать сокет: '. socket_strerror(socket_last_error()) . PHP_EOL;
}

$rval = socket_get_option($socket, SOL_SOCKET, SO_REUSEADDR);

if ($rval === false) {
    echo 'Не могу получить опцию сокета: '. socket_strerror(socket_last_error()) . PHP_EOL;
} else if ($rval !== 0) {
    echo 'Опция SO_REUSEADDR установлена на сокете!' . PHP_EOL;
}
?>

Смотрите также

socket_create() - Создаёт сокет (конечную точку для обмена информацией)
socket_bind() - Привязывает имя к сокету
socket_strerror() - Возвращает строку, описывающую ошибку сокета
socket_last_error() - Возвращает последнюю ошибку на сокете
socket_get_option() - Получает опции потока для сокета

add a note

User Contributed Notes 8 notes

down

drenintell ¶

19 years ago


To expand a bit more on what "tim at e2-media dot co dot nz" started.

SO_SNDTIMEO is one of the many constants you can use with socket_set_option.

See http://ca.php.net/manual/en/ref.sockets.php for the available Predefind Constants and visit http://man.he.net/man2/setsockopt for the meaning of the ones relevant.

Tim's example might seem at first a bit non-intuitive since he is using the SO_SNDTIMEO constant. Which means, if the socket has to send out data, it must do it within the limit specified - in his case 10 seconds. Usually you won't set a timeout for sending out data. Nevertheless, the example is valid, and there are situations where you need to do so.

A more intuitive use of socket_set_option would be to set a time out for a blocking socket (a socket that waits for data to be receive when read from). You would do this like so:

socket_set_option($socket,SOL_SOCKET, SO_RCVTIMEO, array("sec"=>0, "usec"=>100));

Notice that sec= 0 and usec= 100; Depending on how long you want your program to wait to recieve data, you might want to change these values.

Regards,
  drenintell

down

aeolianmeson at ifacfchi dot blitzeclipse dot com ¶

16 years ago


Lingering will sometimes not work when you're working with non-blocking sockets. Even if the socket is set to linger and you keep tying to close until the socket doesn't return an error and the resource is no longer identifiable as type 'Socket', the socket may STILL close without sending everything.

Therefore, in the event that you are using non-blocking sockets (which is preferable if you care at all about signaling), you should set the socket as blocking (socket_set_block()) before calling to close it. This will allow everything to flush before it returns.

Dustin Oprea

down

gmail user asmqb7 ¶

5 years ago


PLEASE NOTE

PHP 7.3.6, and probably many previous versions, automatically sets SO_REUSEADDR when you use stream_socket_server().

php_network_bind_socket_to_local_addr() is called at https://github.com/php/php-src/blob/623911f993f39ebbe75abe2771fc89faf6b15b9b/main/streams/xp_socket.c#L675 and defined at https://github.com/php/php-src/blob/61a6a6ec51297506c54f3c6e60ace9b892d0a3e4/main/network.c#L401 and if you take a look you'll see

#ifdef SO_REUSEADDR
            setsockopt(sock, SOL_SOCKET, SO_REUSEADDR, (char*)&sockoptval, sizeof(sockoptval));
#endif

I initially thought I'd need to play with context options to turn this on, but no, the simplest single-arg call with no error checking and just an address, works for me.

strace your PHP binary to be 100% sure:

...
setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
...

The chances are you ARE using SO_REUSEADDR unless you're using a 100-year old UNIX clone in a month with a Z in it.

down

renmengyang567 at gmail dot com ¶

5 years ago


<question>
 Why is the size of the buffer 2 times that set by me?
<?php
//Before setting the cache area
$sock = socket_create(AF_INET, SOCK_STREAM, getprotobyname('tcp'));
socket_bind($sock, '127.0.0.1',5000);
socket_listen($sock,1024);
$sndbuf = socket_get_option($sock,SOL_SOCKET,SO_SNDBUF);
$rcvbuf = socket_get_option($sock,SOL_SOCKET,SO_RCVBUF);
printf("send buffer size(写缓存区大小):%sm \n",$sndbuf/1024);
printf("receive buffer(读缓存区大小)%sm \n",$rcvbuf/1024);

//After setting the cache area
$snd_buf = 1024*3;
$rcv_buf = 1024*3;

socket_set_option($sock,SOL_SOCKET,SO_SNDBUF, $snd_buf);
socket_set_option($sock,SOL_SOCKET,SO_RCVBUF, $rcv_buf);
$sndbuf = socket_get_option($sock,SOL_SOCKET,SO_SNDBUF);
$rcvbuf = socket_get_option($sock,SOL_SOCKET,SO_RCVBUF);

printf("send buffer size(写缓存区大小):%sm \n",$sndbuf/1024);
printf("receive buffer size(读缓存区大小)%sm \n",$rcvbuf/1024);
?>

down

ludvig dot ericson at gmail dot com ¶

17 years ago


I would like to comment on the previous note regarding blocking sockets.
There is more to blocking sockets than waiting for data to be received when trying to be read upon, just to make example, a listening blocking socket will wait for a client to try to connect before it returns when you socket_accept() it.

down

tim at e2-media dot co dot nz ¶

20 years ago


To set a socket timeout value (assuming you've set it blocking) use:

socket_set_option(
  $socket,
  SOL_SOCKET,  // socket level
  SO_SNDTIMEO, // timeout option
  array(
    "sec"=>10, // Timeout in seconds
    "usec"=>0  // I assume timeout in microseconds
    )
  );

down

-2

DaveRandom ¶

13 years ago


Setting the socket timeout microseconds ('usec') does not work under Windows, at least under PHP/5.2.9:

<?php

  $timeout = array('sec'=>1,'usec'=>500000);
  socket_set_option($socket,SOL_SOCKET,SO_RCVTIMEO,$timeout);
  var_dump(socket_set_option($socket,SOL_SOCKET,SO_RCVTIMEO));

?>

Output on Windows box:

array(2) {
  ["sec"]=>
  int(1)
  ["usec"]=>
  int(0)
}

Output on Linux box:

array(2) {
  ["sec"]=>
  int(1)
  ["usec"]=>
  int(500000)
}

down

-4

ckozler at kozler dot net ¶

12 years ago


It appears that Winsock does not acknowledge timeout (send and receive) on Windows.

add a note