Edit Report a Bug

    The Collator class

    (PHP 5 >= 5.3.0, PHP 7, PHP 8, PECL intl >= 1.0.0)

    简介

    Provides string comparison capability with support for appropriate locale-sensitive sort orderings.

    类摘要

    class Collator {
    /* 常量 */
    const int DEFAULT_VALUE;
    const int PRIMARY;
    const int SECONDARY;
    const int TERTIARY;
    const int DEFAULT_STRENGTH;
    const int QUATERNARY;
    const int IDENTICAL;
    const int OFF;
    const int ON;
    const int SHIFTED;
    const int NON_IGNORABLE;
    const int LOWER_FIRST;
    const int UPPER_FIRST;
    const int FRENCH_COLLATION;
    const int ALTERNATE_HANDLING;
    const int CASE_FIRST;
    const int CASE_LEVEL;
    const int NORMALIZATION_MODE;
    const int STRENGTH;
    const int HIRAGANA_QUATERNARY_MODE;
    const int NUMERIC_COLLATION;
    const int SORT_REGULAR;
    const int SORT_STRING;
    const int SORT_NUMERIC;
    /* 方法 */
    public __construct(string $locale)
    public asort(array &$array, int $flags = Collator::SORT_REGULAR): bool
    public compare(string $string1, string $string2): int|false
    public static create(string $locale): ?Collator
    public getAttribute(int $attribute): int|false
    public getErrorCode(): int|false
    public getErrorMessage(): string|false
    public getLocale(int $type): string|false
    public getSortKey(string $string): string|false
    public getStrength(): int
    public setAttribute(int $attribute, int $value): bool
    public setStrength(int $strength): bool
    public sortWithSortKeys(array &$array): bool
    public sort(array &$array, int $flags = Collator::SORT_REGULAR): bool
    }

    预定义常量

    Collator::FRENCH_COLLATION

    Sort strings with different accents from the back of the string. This attribute is automatically set to On for the French locales and a few others. Users normally would not need to explicitly set this attribute. There is a string comparison performance cost when it is set On, but sort key length is unaffected. Possible values are:

    • Collator::ON
    • Collator::OFF(default)
    • Collator::DEFAULT_VALUE

    示例 #1 FRENCH_COLLATION rules

    • F=OFF cote < coté < côte < côté
    • F=ON cote < côte < coté < côté

    Collator::ALTERNATE_HANDLING

    The Alternate attribute is used to control the handling of the so called variable characters in the UCA: whitespace, punctuation and symbols. If Alternate is set to NonIgnorable (N), then differences among these characters are of the same importance as differences among letters. If Alternate is set to Shifted (S), then these characters are of only minor importance. The Shifted value is often used in combination with Strength set to Quaternary. In such a case, whitespace, punctuation, and symbols are considered when comparing strings, but only if all other aspects of the strings (base letters, accents, and case) are identical. If Alternate is not set to Shifted, then there is no difference between a Strength of 3 and a Strength of 4. For more information and examples, see Variable_Weighting in the » UCA. The reason the Alternate values are not simply On and Off is that additional Alternate values may be added in the future. The UCA option Blanked is expressed with Strength set to 3, and Alternate set to Shifted. The default for most locales is NonIgnorable. If Shifted is selected, it may be slower if there are many strings that are the same except for punctuation; sort key length will not be affected unless the strength level is also increased.

    Possible values are:

    • Collator::NON_IGNORABLE(default)
    • Collator::SHIFTED
    • Collator::DEFAULT_VALUE

    示例 #2 ALTERNATE_HANDLING rules

    • S=3, A=N di Silva < Di Silva < diSilva < U.S.A. < USA
    • S=3, A=S di Silva = diSilva < Di Silva < U.S.A. = USA
    • S=4, A=S di Silva < diSilva < Di Silva < U.S.A. < USA

    Collator::CASE_FIRST

    The Case_First attribute is used to control whether uppercase letters come before lowercase letters or vice versa, in the absence of other differences in the strings. The possible values are Uppercase_First (U) and Lowercase_First (L), plus the standard Default and Off. There is almost no difference between the Off and Lowercase_First options in terms of results, so typically users will not use Lowercase_First: only Off or Uppercase_First. (People interested in the detailed differences between X and L should consult the Collation Customization). Specifying either L or U won't affect string comparison performance, but will affect the sort key length.

    Possible values are:

    • Collator::OFF(default)
    • Collator::LOWER_FIRST
    • Collator::UPPER_FIRST
    • Collator:DEFAULT

    示例 #3 CASE_FIRST rules

    • C=X or C=L "china" < "China" < "denmark" < "Denmark"
    • C=U "China" < "china" < "Denmark" < "denmark"

    Collator::CASE_LEVEL

    The Case_Level attribute is used when ignoring accents but not case. In such a situation, set Strength to be Primary, and Case_Level to be On. In most locales, this setting is Off by default. There is a small string comparison performance and sort key impact if this attribute is set to be On.

    Possible values are:

    • Collator::OFF(default)
    • Collator::ON
    • Collator::DEFAULT_VALUE

    示例 #4 CASE_LEVEL rules

    • S=1, E=X role = Role = rôle
    • S=1, E=O role = rôle < Role

    Collator::NORMALIZATION_MODE

    The Normalization setting determines whether text is thoroughly normalized or not in comparison. Even if the setting is off (which is the default for many locales), text as represented in common usage will compare correctly (for details, see UTN #5). Only if the accent marks are in noncanonical order will there be a problem. If the setting is On, then the best results are guaranteed for all possible text input. There is a medium string comparison performance cost if this attribute is On, depending on the frequency of sequences that require normalization. There is no significant effect on sort key length. If the input text is known to be in NFD or NFKD normalization forms, there is no need to enable this Normalization option.

    Possible values are:

    • Collator::OFF(default)
    • Collator::ON
    • Collator::DEFAULT_VALUE

    Collator::STRENGTH

    The ICU Collation Service supports many levels of comparison (named "Levels", but also known as "Strengths"). Having these categories enables ICU to sort strings precisely according to local conventions. However, by allowing the levels to be selectively employed, searching for a string in text can be performed with various matching conditions. For more detailed information, see collator_set_strength() chapter.

    Possible values are:

    • Collator::PRIMARY
    • Collator::SECONDARY
    • Collator::TERTIARY(default)
    • Collator::QUATERNARY
    • Collator::IDENTICAL
    • Collator::DEFAULT_VALUE

    Collator::HIRAGANA_QUATERNARY_MODE

    Compatibility with JIS x 4061 requires the introduction of an additional level to distinguish Hiragana and Katakana characters. If compatibility with that standard is required, then this attribute should be set On, and the strength set to Quaternary. This will affect sort key length and string comparison string comparison performance.

    Possible values are:

    • Collator::OFF(default)
    • Collator::ON
    • Collator::DEFAULT_VALUE

    Collator::NUMERIC_COLLATION

    When turned on, this attribute generates a collation key for the numeric value of substrings of digits. This is a way to get '100' to sort AFTER '2'.

    Possible values are:

    • Collator::OFF(default)
    • Collator::ON
    • Collator::DEFAULT_VALUE

    Collator::DEFAULT_VALUE
    Collator::PRIMARY
    Collator::SECONDARY
    Collator::TERTIARY
    Collator::DEFAULT_STRENGTH
    Collator::QUATERNARY
    Collator::IDENTICAL
    Collator::OFF
    Collator::ON
    Collator::SHIFTED
    Collator::NON_IGNORABLE
    Collator::LOWER_FIRST
    Collator::UPPER_FIRST
    Collator::SORT_REGULAR

    Collator::SORT_STRING

    Collator::SORT_NUMERIC

    目录

    add a note add a note

    User Contributed Notes

    There are no user contributed notes for this page.
    To Top