Edit Report a Bug

    IMAP Funktionen

    Siehe auch

    Dieses Dokument kann nicht alle von den enthaltenen Funktionen berührten Themenbereiche im Detail beschreiben. Weitergehende Informationen finden Sie in der Dokumentation zum c-client-Quellcode (docs/internal.txt) und in den folgenden RFC-Standarddokumenten:

    Einen detaillierten Überblick der relevanten Themen bieten auch die Bücher » Programming Internet Email von David Wood und » Managing IMAP von Dianna Mullet & Kevin Mullet.

    Inhaltsverzeichnis

    add a note add a note

    User Contributed Notes 21 notes

    up
    89
    v dot 0000000001 dot -0006398047 at vertabiz dot com
    19 years ago
    Since this library at a whole is fairly poorly documented, and it doesn't help that there's 30-something functions, and many of the functions do the same things, I have gone through and categorized the functions.  Hopefully this will help somebody else, I know it will help me!! -Justin

    CONNECTION, ERRORS & QUOTAS
    ===========================
    imap_timeout
    imap_ping
    imap_open
    imap_reopen
    imap_close
    imap_check **(fairly useless)
    imap_alerts
    imap_errors
    imap_last_error
    imap_get_quota
    imap_get_quotaroot
    imap_set_quota

    MESSAGES - READING
    ==================
    imap_uid
    imap_msgno
    imap_fetchbody
    imap_fetchheader
    imap_fetchstructure
    imap_fetch_overview
    imap_body
    imap_rfc822_parse_adrlist
    imap_rfc822_parse_headers

    MESSAGES - WRITING
    ==================
    imap_mail_compose
    imap_mail
    imap_append
    imap_rfc822_write_address

    MESSAGES - OPERATIONS
    =====================
    imap_undelete
    imap_thread
    imap_delete
    imap_mail_copy
    imap_mail_move
    imap_expunge
    imap_clearflag_full
    imap_setflag_full

    MESSAGES - DECODE/ENCODE
    ========================
    imap_utf7_decode
    imap_utf7_encode
    imap_utf8
    imap_8bit
    imap_base64
    imap_binary
    imap_mime_header_decode
    imap_qprint

    FOLDERS
    =======
    imap_createmailbox
    imap_deletemailbox
    imap_getmailboxes
    imap_mailboxmsginfo
    imap_renamemailbox
    imap_headers **(fairly useless)
    imap_status
    imap_sort
    imap_search
    imap_listscan

    NNTP
    ====
    imap_unsubscribe
    imap_subscribe
    imap_getsubscribed

    Others
    =============================
    imap_num_msg - use imap_mailboxmsginfo()
    imap_num_recent - use imap_mailboxmsginfo()
    imap_header - alias of imap_headerinfo()
    imap_scanmailbox - alias of imap_listscan()
    imap_listsubscribed - alias of imap_lsub()
    imap_listmailbox - alias of imap_list()
    imap_lsub - use imap_getsubscribed()
    imap_list - use imap_getmailboxes()
    imap_bodystruct - not documented
    imap_getacl - not documented
    imap_setacl - not documented
    imap_headerinfo - use imap_fetch_overview()
    up
    3
    BjarneDM macintosh at mathiesen dot info
    19 years ago
    Mac OS X client install notes with DarwinPorts

    The c-client.a isn't present on your system after you've installed the imap-uw package. !But! it's actually present at a specific time during the install phase as it's being complied from source - it's just deleted at the end of the compilation process. So, we'll have to break the install process down into it's component processes and get hold of what we need at the appropriate time:

    sudo port fetch imap-uw
    sudo port extract imap-uw
    sudo port patch imap-uw
    sudo port configure imap-uw
    sudo port build imap-uw
    imapLib=/darwinports/var/db/dports/distfiles/imap-uw/lib
    imapIncludes=/darwinports/var/db/dports/distfiles/imap-uw/include
    sudo mkdir ${imapLib} ${imapInclude}
    cd /darwinports/var/db/dports/build/*/*/*/c-client
    sudo cp *.c ${imapLib}
    sudo cp *.h ${imapIncludes}
    sudo cp c-client.a ${imapLib}/libc-client.a
    cd ${imapLib}
    ranlib - libc-client.a
    sudo port install imap-uw

    Now, you can just specify:
        --with-imap=/darwinports/var/db/dports/distfiles/imap-uw \
        --with-imap-ssl=/darwinports \
    in your ./configure command.
    up
    3
    Anonymous
    19 years ago
    If you are having difficulty compiling on netbsd from source and want imap support then you should know that the c-client library is compiled with kerberos support.  Unfortunately gssapi_krb5 and k5crypto is not on the system (or at least wasn't for me).  I didn't have administrative level access to add these libraries so I had to do the following.  I still have to test that it worked 100% but at least it compiled without complaining.

    Comment the following segments from the configure script.

    Segment 1 -- test for gssapi_krb5 library

      case gssapi_krb5 in
      c|c_r|pthread*) ;;
      *)
        if test "$ext_shared" = "yes"; then
            IMAP_SHARED_LIBADD="$IMAP_SHARED_LIBADD -lgssapi_krb5"
        else


      case gssapi_krb5 in
      c|c_r|pthread*) ;;
      *)
          LIBS="$LIBS -lgssapi_krb5"
       ;;
      esac

        fi
       ;;
      esac

    Segment 2 -- test for k5crypto

      case k5crypto in
      c|c_r|pthread*) ;;
      *)
        if test "$ext_shared" = "yes"; then
            IMAP_SHARED_LIBADD="$IMAP_SHARED_LIBADD -lk5crypto"
        else

      case k5crypto in
      c|c_r|pthread*) ;;
      *)
          LIBS="$LIBS -lk5crypto"
       ;;
      esac

        fi
       ;;
      esac

    BTW.  Since I was only compiling for the modules (they have suPHP so I compile all my own modules when I need them) I only dropped this in for the php configure script parameters

    ./configure --with-imap=shared,xxxxxx --with-kerberos=xxxxxx --with-imap-ssl

    This is verified working via an imap test.  One excellent test that I located on the phpbuilder.com site.  Here it is.  Modify the address, port, protocol type, username, and password appropriately.  The post was 5 years old but the script still works fine.  The posters name was "Matthew"

    <HTML>
    <HEAD>
    <TITLE>imap_check</TITLE>
    </HEAD>
    <BODY>
    <?
                 //check for new messages

                 $mailbox = imap_open("{localhost/pop3:110}INBOX",
                         "#username#","#password#");

                 // Check messages
                 $check = imap_check($mailbox);
             print(    "<PRE>");
             print(    "Date most recent message : " . $check->Date);
             print(    "<BR>");
             print(    "Connection type : " . $check->Driver);
             print(    "<BR>");
             print(    "Name of the mailbox : " . $check->Mailbox);
             print(    "<BR>");
             print(    "Number of messages : " . $check->Nmsgs);
             print(    "<BR>");
             print(    "Number of recent messages : " . $check->Recent);
             print(    "<BR>");
             print(    "</PRE>");

                 // show headers for messages

                 $index=1;

                 $header = imap_header($mailbox, $index);
             print(    "<PRE>");
             print(    "Header Date : " . $header->Date . "<BR>");
             print(    "Header To : " . $header->to) . "<BR>";
             print(    "Header From : " . $header->From . "<BR>");
             print(    "Header cc : " . $header->cc . "<BR>");
             print(    "Header ReplyTo : " . $header->ReplyTo . "<BR>");
             print(    "Header Subject : " . $header->Subject . "<BR></PRE>");

             print(    "<PRE>");
             print(    imap_body($mailbox,$index));
             print(    "</PRE><HR>");

                 imap_close($mailbox);
    ?>

    </BODY></HTML>
    up
    2
    James Triplett <jm-php at vj8 dot net>
    18 years ago
    Building Apache2, PHP and IMAP requires a shareable version
    of the c-client library, but the standard UW code doesn't provide one.
    I couldn't find any way to build with the libc-client.a without generating piles of relocation errors. (gcc on Solaris 10)

    The IMAP c-client library can be built shareable with the following steps:
    1. fix the Makefile in .../imap-2004/c-client to include:
    BASECFLAGS="-fPIC -O3"
    2. make
    3. mkdir tmp
    4. cd tmp
    5. ar xv ../c-client.a  (to extract the .o files)
    6. gcc -shared -o c-client.so *.o  (to create the .so library)
    7. copy that c-client.so to /usr/local/imap/lib/libc-client.so
        (it may be necessary to hide the libc-client.a)
    8. configure PHP ; make; make install
    up
    0
    mogmios at gmail dot com
    17 years ago
    In Fedora Core 6 64 bit w/ a custom compiled copy of Apache and PHP 4 I had to add packages libc-client*x84_64 and then just used config options --with-imap --with-kerberos --with-imap-ssl.
    up
    0
    couplewith at interpakr dot co dot kr
    17 years ago
    imap-install
      1. tar xvzf c-client.tgz
      2. cd imap-2006e
      3. make lrh    # install redhat linux
      4. cp c-client/c-client.a  /usr/local/lib/libc-client.a
          copy head files
          c-client/rfc822.h, mail.h 과 linkage.h
           /usr/local/include
           c-clinet/utf-8.h /usr/local/include
      5. if  U8T_CANONICAL undefined error
          edit php_src/ext/imap/php_imap.c

    ==add 53 line ==
    #include <time.h>
    #include <stdio.h>
    #include <ctype.h>
    #include <signal.h>
    +#include "utf8.h"
       6. make php installatin step
    up
    -2
    mleiv
    17 years ago
    MAC OSX advice for those less experienced in UNIX.

    I had a lot of trouble with all the advice here, but I finally got it working, so I thought I'd leave my steps.  If you know a decent amount about UNIX you can probably do better on you own.
    #1) downloaded version listed by php.net above.
    #2) ran "make opx" on it (the three-letter is your OS, opx is later osx versions)
    #3) copied resulting c-client/ folder to where I wanted to leave my imap stuff, herafter referred to as IMAP_HOME.
    #4) renamed IMAP_HOME/c-client/c-client.a to libc-client.a
    #5) ran "configure" on php using --with-imap=IMAP_HOME --with-kerberos  --with-imap-ssl (my configure insisted that I use the last two)
    #6) make, make install, and restarted Apache.  Voila!   

    At this point you can delete the downloaded imap stuff, or move it to your sources/ folder or whatever.
    up
    0
    seem dot iges at mail dot ee
    19 years ago
    If you like me disvoer that "make slx" fails, but you're damn sure you've openssl installed then, it might be that the lib and include paths on your distro are different then the defaults provided in the imap-2004a (or imap-XXXXx). To modify go to dir ../imap-2004a/src/osdep/unix and edit the section (shown below) in the Makefile

    # Extended flags needed for SSL.  You may need to modify.

    #SSLDIR=/usr/local/ssl
    SSLDIR=/etc/ssl
    SSLCERTS=$(SSLDIR)/certs
    SSLKEYS=$(SSLCERTS)
    #SSLINCLUDE=$(SSLDIR)/include
    SSLINCLUDE=/usr/include/openssl
    #SSLLIB=$(SSLDIR)/lib
    SSLLIB=/usr/lib

    SSLCRYPTO=-lcrypto

    Commented out SSLDIR, SSLINCLUDE and SSLIB are defaults and the uncommented are valid paths for Slackware (10.0/10.1).
    You should also check your ld.so.conf for valid paths.
    up
    0
    antivert
    19 years ago
    Note that is not not necessary to disable SSL in the IMAP compile to make it work with PHP 5.0.3.

    1. Compile IMAP with SSL support for your system:

    cd /path/to/imap/source/
    make <system type> (ldb, lnx, etc)
    mkdir include
    mkdir lib

    2. Make links in IMAP source directory:

    cd /path/to/imap/source/c-client
    cp *.h ../include/
    cp *.c ../lib/
    cp c-client.a ../lib/libc-client.a

    3. Compile PHP with SSL support,  --with-imap=/path/to/imap/source/ . If SSL support fails, you'll get a configure-time error that IMAP doesn't work. This is a lie, you just need to get SSL support working in PHP. On certain linux systems, with OpenSSL 0.9.7, this means adding --with-openssl=/usr (if the OpenSSL files are in /usr/include/openssl/) instead of the proper directory containing the OpenSSL files. For some reason, giving a parent directory makes PHP able to find the OpenSSL include files.

    4. PHP should build.

    Alternately, you can disable SSL during the IMAP build, as per the previous directions posted here.
    up
    0
    Pete Spicer, sleeping [at] myperch.org
    20 years ago
    I have a pretty much stock set-up of SuSE 8.1 Personal (Apache, PHP et al built by me) and IMAP-2004 refused to build for me.

    What I found was, using the make lsu (for SuSE) almost worked built I was getting odd build results, i.e. make failures.

    The problem? GCC 3.2. If you don't have an older GCC available, please install one! I installed the gcc_old package from SuSE and built with the following command:

    CC=gcc297 make lsu SSLTYPE=none

    The result was a perfect build. So if you are getting errors, please try an earlier build of GCC.
    up
    0
    Tomas V.V.Cox
    20 years ago
    For compiling this extension without compiling imap from sources I did (this was mandrake):

    Install the following rpms:
    imap
    imap-devel
    openssl
    openssl-devel
    krb5
    krb5-devel
    pam
    pam-devel

    Do the trick:
    # mkdir /usr/include/imap/lib
    # cp /usr/lib/libc-client-PHP4.a /usr/include/imap/lib/libc-client.a

    And the configure line:
    ./configure <options> --with-imap=/usr/include/imap --with-imap-ssl

    (don't forget --enable-pear ;)
    up
    -1
    kvazitron at gmail dot com
    16 years ago
    I successfully installed c-client and compiled php 5.2.5 with imap on FreeBSD 6.3. To get this stuff work, i did following steps:

    1) to install c-client:

    download and uncompress c-client.tar.Z to folder /usr/local/
    cd /usr/local/imap-2007
    make bsf
    mkdir include
    ln -s c-client include
    mkdir lib
    cd lib
    ln -s ../c-client/c-client.a libc-client.a

    2) to compile php:
    add this options
    --with-imap=/usr/local/imap-2007 --with-imap-ssl
    up
    -1
    gpayne at galenaparkisd com
    17 years ago
    You can also use the novalidate-cert flag and it won't bother you about the ssl stuff:

    $mailbox = imap_open("{localhost:143/imap/novalidate-cert}INBOX", "user","pw");
    up
    -1
    Marplatense
    18 years ago
    Compiling php with support for imap on a linux 64 bits server (tested with php 5.1.6, php 5.2.0, CentOS 4.4 64 bits and c-client snap 0611201609):

    1- download the imap from ftp.
    # tar -zxvf imap-2006d.DEV.tar.Z
    # cd imap-2006d.DEV.SNAP-0611201609/
    # vim MakeFile
    2- Search for "EXTRACFLAGS=" and add -fPIC at then end:
        before EXTRACFLAGS=
        after   EXTRACFLAGS=-fPIC
    3- save the file and quit
    # make lrh
    # cd c-client/
    # cp /.../imap-2006d.DEV.SNAP-0611201609/c-client/c-client.a /.../imap-2006d.DEV.SNAP-0611201609/c-client/libc-client.a
    4- navigate to your php directory and:
    # ./configure ... lots of options here and ... --with-imap=/.../imap-2006d.DEV.SNAP-0611201609 --with-imap-ssl
    # make
    # make install

    Additional notes:
    a- I choose "lrh" in the make but you might check what's yours option.
    b- I made it with ssl support and because of this I added the --with-imap-ssl in the php configure option. You might make it with no SSL
    up
    -1
    Eelco
    13 years ago
    I used the instructions from Chris (thanks Chris) to recompile the imap.so module for CentOS 5 (PHP 5.2.11). I didn't want to recompile all PHP extensions only imap.so.

    So here is my version of recompiling imap.so for PHP 5.2.11 based on the instructions of Chris.

    0) Install the dependencies
    yum groupinstall "Development Tools"
    yum install openssl-devel
    yum install krb5 krb5-devel
    yum install pam-devel
    1) Create a temporary folder and cd to it.
    # mkdir ~/php-imap && cd ~/php-imap
    2) Download c-client.tar.Z
    # wget ftp://ftp.cac.washington.edu/imap/c-client.tar.Z
    3) Extract the c-client.tar.Z file, which would create the imap-2007e folder at this moment.
    # tar -zxf c-client.tar.Z
    4) Download php source code using. Use the version of the php installed on the machine (php --version)
    Extract the php-*.rpm file to get the php-*.tar.bz2 source package
    # wget http://3es.atomicrocketturtle.com/packages/ php/php-5.2.11-3.art.src.rpm
    # rpm2cpio php-5.2.11-3.art.src.rpm | cpio -idmv
    # tar xvjf php-5.2.11.tar.bz2
    5) Install php-imap plugin using or you can simply just add the php ini file for the imap.so extension
    # sudo yum install php-imap
    6) Go to the imap-2007e folder and edit the Makefile such that the 'EXTRACFLAGS=' line reads: 'EXTRACFLAGS=-fPIC'
    7) Compile c-client.
    # make lr5  IP6=4
    8) Go to the php source folder and run the configure script with the following arguments:
    # ./configure --disable-all --with-imap=shared,<path to imap-2007e folder> --with-imap-ssl --with-openssl=/usr
    9) Compile php
    # make
    10) Copy/replace the imap.so file from the ./modules folder to the php module folder.
    # sudo cp ./modules/imap.so /usr/lib64/php/modules
    11) Restart Apache
    # sudo /etc/init.d/httpd restart
    12) Check imap section of <?php phpinfo(); ?>, and it should only list IMAP c-Client Version and SSL Support. The Kerberos Support should NOT be listed here!
    up
    -1
    bogdanderen at mail dot ru
    17 years ago
    INSTALLING IMAP
       1. Log in as root:
          su -
       2. Download IMAP installation
       3. Untar the package:
          tar -zxf IMAP_PACKAGE_FILENAME
       4. Enter the source directory:
          cd IMAP_PACKAGE_DIRECTORY
       5. Build the package.
          # edit Makefile EXTRACFLAGS=-fPIC
          # make lrh
       6. Install the lib and include files:
          # mkdir /IMAP_DIR/lib
          # mkdir /IMAP_DIR/include
          # cp -r ./src/c-client/*.h /IMAP_DIR/include/
          # cp  ./c-client/linkage.h /IMAP_DIR/include/
          # cp ./src/osdep/unix/*.h /IMAP_DIR/include/
          # cp ./src/osdep/unix/*.c /IMAP_DIR/lib/
          # rm -rf all files and directories except /IMAP_DIR/include/ & /IMAP_DIR/lib/
       7. Create the osdep.h link:
          Linux:
          # ln -s ./include/c-client/os_slx.h \
          /IMAP_DIR/include/osdep.h

    INSTALLING PHP (DO NOT --with-kerberos)
        --with-imap=/IMAP_DIR
    up
    -1
    eeescalona at yahoo dot com
    17 years ago
    fyi.

    I had an error during this process

    *downloaded from ftp.cac.washington.edu  imap-2006e.tar.gz
    *untarred it as /usr/local/src/imap-2006e.
    *made lrh (make lrh)
    *copied /usr...imap-2006e/c-client/c-client.a into ..../client/libc-client.a
    *cd /usr/local/src/php-4.2.1/
    *configured php using ... --with-imap=/usr/local/src/imap-2006e --with-ssl

    *and during make the following error occurred.

    php_imap.c:71: error: conflicting types for 'utf8_mime2text'
    /usr/local/src/imap-2006e//c-client/utf8aux.h:37: error: previous declaration of 'utf8_mime2text' was here
    php_imap.c:71: error: conflicting types for 'utf8_mime2text'
    /usr/local/src/imap-2006e//c-client/utf8aux.h:37: error: previous declaration of 'utf8_mime2text' was here
    make[3]: *** [php_imap.lo] Error 1
    make[3]: Leaving directory `/usr/local/src/php-4.2.1/ext/imap'
    make[2]: *** [all-recursive] Error 1
    make[2]: Leaving directory `/usr/local/src/php-4.2.1/ext/imap'
    make[1]: *** [all-recursive] Error 1
    make[1]: Leaving directory `/usr/local/src/php-4.2.1/ext'
    make: *** [all-recursive] Error 1

    apparently, apache 4.2.1 and imap-2006e has the same declared function which creates a duplication problem. the utf8_mime2text function is both found on files:

    php-4.2.1/imap/php_imap.c (2 occurences)
    imap-2006e/c-client/utf8aux.h (1 occurences)
    imap-2006e/c-client/utf8aux.c (1 occurrences)
    imap-2006e/c-client/mail.c (5 occrences)

    bug fixers says i have to upgrade my php, but I cant afford to change versions since i run some home grown developed php software which doesnt work on higher versions.

    So I did this.

    I replaced all utf8_mime2text texts with utf8_mime2text2 for the imap sources.

    since my server is both web and mysql, i used a built in mysql command called 'replace'

    $>replace utf8_mime2text utf8_mime2text2 -- /..../c-client/utf8aux.h
    $>replace utf8_mime2text utf8_mime2text2 -- /..../c-client/utf8aux.c
    $>replace utf8_mime2text utf8_mime2text2 -- /..../c-client/mail.c

    then i continued make and make install, without the reported error.

    caveats...i just did this to try it. i dunno if it will work later...
    up
    -1
    php at got2get dot net
    19 years ago
    Install note for FreeBSD:

    If you get this:

    /libexec/ld-elf.so.1: /usr/local/lib/php/20041030/imap.so: Undefined symbol "ssl_onceonlyinit"

    ...in your httpd-error.log.

    It is because you compiled cclient without SSL support.

    However. In order for me to get SquirrelMail woorking, I had to install ports/mail/imap-uw with WITHOUT_SSL=yes and same option for ports/mail/cclient. After doing this, I recompiled cclient w/o any options to get SSL support, and then installed posrt/mail/php5-imap.

    This works. But if you just want SSL everywhere - install imap-uw normally, which will install cclient too. After that, install php5-imap normally as well - and you have a working system with SSL.

    Hope this saves more people from wasting too much time like I just did ;)

    - Nicolai
    up
    -2
    chris dot kistner at gmail dot com
    13 years ago
    The IMAP php plugin doesn't work by default with Microsoft Exchange 2007 server, so I had to recompile php with the c-client without Kerberos support.

    Also, I wanted to compile it as a shared library (imap.so).

    The quick and easy way that I've used to do this on Fedora Core 13 & 14 x64 was:
    1) Create a temporary folder and cd to it.
    2) Download c-client.tar.Z from ftp://ftp.cac.washington.edu/imap/
    3) Extract the c-client.tar.Z file, using 'tar -zxf c-client.tar.Z', which would create the imap-2007e folder at this moment.
    4) Download php source code using 'yumdownloader --source php' *(a)
    Extract the php-*.rpm file to get the php-*.tar.bz2 source package *(b)
    5) Install php-imap plugin using 'sudo yum install php-imap', or you can simply just add the php ini file for the imap.so extension
    6) Go to the imap-2007e folder and edit the Makefile such that the 'EXTRACFLAGS=' line reads: 'EXTRACFLAGS=-fPIC'
    7) Compile c-client. I had to use 'make lfd IP6=4'
    8) Go to the php source folder and run the configure script with the following arguments: './configure --with-imap=shared,<path to imap-2007e folder> --with-imap-ssl'
    eg. I used './configure --with-imap=shared,/home/chris/imap-2007e --with-imap-ssl'
    9) Compile php by simply running 'make' *(c)
    10) Copy/replace the imap.so file from the ./modules folder to your PC's php module folder. I used 'sudo cp ./modules/imap.so /usr/lib64/php/modules'
    11) Restart Apache: 'sudo service httpd restart'
    12) Check imap section of <?php phpinfo(); ?>, and it should only list IMAP c-Client Version and SSL Support. The Kerberos Support should NOT be listed here!

    There are slight differences in achieving the same in Ubuntu 10.04 x64 (or perhaps other versions too):
    4) Download php source code using 'apt-get source php5', which will create a php5-* source folder
    5) Install the php5-imap plugin using 'sudo apt-get install php5-imap'
    7) Compile c-client. I had to use 'make ldb IP6=4'
    10) Copy/replace the imap.so file from the ./modules folder to your PC's php folder. I used 'sudo cp ./modules/imap.so /usr/lib64/php5/20090626'
    11) Restart Apache: 'sudo service apache2 restart'

    * Notes:
    (a) yumdownloader is part of yum-utils package, which can be installed using 'yum install yum-utils'
    (b) You can extract the rpm file using 'rpm2cpio php-*.src.rpm | cpio -idmv'
    (c) You can greatly improve the compilation speed on a multi-core PC using 'make -j `grep -c ^processor /proc/cpuinfo`'
    up
    -2
    bigben3333 - gmail
    16 years ago
    I've tried to compile php with imap sources for 2 days on a mandriva 2006 and it never work...

    I succeed only when i uninstall the following RPM witch was already installed on my system :

    libc-client
    libc-client-devel
    imap
    imap-devel

    here is my configure command :

    ./configure  --with-apache=/usr/local/apache --with-dbase --with-filepro --enable-mbstring --with-xml=/usr/local/php --enable-ftp --with-db --enable-bcmath --enable-calendar --with-mysql --with-zlib-dir --enable-trans-sid --with-imap=/usr/local/imap-2004g --with-kerberos --with-imap-ssl --with-openssl --enable-sysvsem --enable-sysvshm
    up
    -3
    amit dot gupta at prudence-india dot com
    20 years ago
    I faced problem in compiling imap with php-5.0.2 release version. Then following commands on snapshot version solved my problem

    # tar -zxvf imap-2004b.DEV.tar.Z
    # cd imap-2004b.DEV.SNAP-0411051435/
    # make lnp SSLTYPE=none
    # cp -r /usr/local/imap-2004b.DEV.SNAP-0411051435/c-client/*.h /usr/local/imap-2004b.DEV.SNAP-0411051435/include/

    # cp -r /usr/local/imap-2004b.DEV.SNAP-0411051435/c-client/*.c /usr/local/imap-2004b.DEV.SNAP-0411051435/lib/

    # ln -s /usr/local/imap-2004b.DEV.SNAP-0411051435/c-client/c-client.a /usr/local/imap-2004b.DEV.SNAP-0411051435/lib/libc-client.a

    # tar -zxvf php5-STABLE-200411180530.tar.gz

    # cd php5-STABLE-200411180530

    ./configure  --with-apxs2=/usr/sbin/apxs --enable-shared --with-mod_charset --enable-force-cgi-redirect --enable-fastcgi --enable-magic-quotes --with-openssl  --with-zlib  --enable-bcmath  --enable-calendar --with-curl  --with-curlwrappers  --enable-dba   --with-gdbm --with-cdb  --with-inifile  --with-flatfile  --enable-dbase   --enable-dbx     --enable-dio --with-fam  --enable-filepro  --enable-ftp  --with-ldap  --enable-mbstring --with-mysql=/usr/include  --with-zlib-dir  --enable-shmop --enable-soap  --enable-sockets    --enable-sysvmsg   --enable-sysvsem  --enable-sysvshm  --enable-wddx --with-pic --enable-versioning  --with-pgsql --with-java=/usr/java/jdk1.5.0/  --with-imap=/usr/local/imap-2004b.DEV.SNAP-0411051435 --with-kerberos

    # make

    # make install

    Thus, php compiled sucessufully with imap support on fedora core 1.
    add a note add a note
    To Top