Array slice function that works with associative arrays (keys):
function array_slice_assoc($array,$keys) {
return array_intersect_key($array,array_flip($keys));
}
(PHP 4, PHP 5, PHP 7, PHP 8)
array_slice — Extrait une portion de tableau
array_slice() retourne une série d'éléments
du tableau array
commençant à
l'offset offset
et représentant
length
éléments.
array
Le tableau d'entrée.
offset
Si offset
est non-négatif, la séquence
commencera à cette position dans le tableau array
.
Si offset
est négatif, la séquence
commencera à la position offset
, mais en
commençant à la fin du tableau array
.
Note:
Le paramètre
offset
indique la position dans le tableau, pas la clé.
length
Si length
est fourni et positif, alors
la séquence aura jusqu'à autant d'éléments.
Si le tableau plus court que length
,
alors seuls les éléments du tableau disponible seront présents.
Si length
est fourni et négatif, alors
la séquence exclura autant d'éléments de la fin du tableau.
Si il est omis, la séquence aura tout
depuis la position offset
jusqu'à la fin de
array
.
preserve_keys
Note:
Par défaut array_slice() réordonnera et réinitialisera les indices entier du tableau. Ce comportement peut être modifié en définissant le paramètre
preserve_keys
àtrue
. Les clés sous forme de chaîne de caractères sont toujours conservées, indépendamment de ce paramètre.
Retourne la portion du tableau. Si la position est plus grande que la taille du tableau, un tableau vide est retourné.
Exemple #1 Exemple avec array_slice()
<?php
$input = array("a", "b", "c", "d", "e");
$output = array_slice($input, 2); // retourne "c", "d", et "e"
$output = array_slice($input, -2, 1); // retourne "d"
$output = array_slice($input, 0, 3); // retourne "a", "b", et "c"
// notez les clés d'index différentes
print_r(array_slice($input, 2, -1));
print_r(array_slice($input, 2, -1, true));
?>
L'exemple ci-dessus va afficher :
Array ( [0] => c [1] => d ) Array ( [2] => c [3] => d )
Exemple #2 array_slice() et basé sur un tableau
<?php
$input = array(1 => "a", "b", "c", "d", "e");
print_r(array_slice($input, 1, 2));
?>
L'exemple ci-dessus va afficher :
Array ( [0] => b [1] => c )
Exemple #3 array_slice() et tableau avec des clés mixtes
<?php
$ar = array('a'=>'apple', 'b'=>'banana', '42'=>'pear', 'd'=>'orange');
print_r(array_slice($ar, 0, 3));
print_r(array_slice($ar, 0, 3, true));
?>
L'exemple ci-dessus va afficher :
Array ( [a] => apple [b] => banana [0] => pear ) Array ( [a] => apple [b] => banana [42] => pear )
Array slice function that works with associative arrays (keys):
function array_slice_assoc($array,$keys) {
return array_intersect_key($array,array_flip($keys));
}
<?php
// CHOP $num ELEMENTS OFF THE FRONT OF AN ARRAY
// RETURN THE CHOP, SHORTENING THE SUBJECT ARRAY
function array_chop(&$arr, $num)
{
$ret = array_slice($arr, 0, $num);
$arr = array_slice($arr, $num);
return $ret;
}
If you want an associative version of this you can do the following:
function array_slice_assoc($array,$keys) {
return array_intersect_key($array,array_flip($keys));
}
However, if you want an inverse associative version of this, just use array_diff_key instead of array_intersect_key.
function array_slice_assoc_inverse($array,$keys) {
return array_diff_key($array,array_flip($keys));
}
Example:
$arr = [
'name' => 'Nathan',
'age' => 20,
'height' => 6
];
array_slice_assoc($arr, ['name','age']);
will return
Array (
'name' = 'Nathan',
'age' = 20
)
Where as
array_slice_assoc_inverse($arr, ['name']);
will return
Array (
'age' = 20,
'height' = 6
)
array_slice can be used to remove elements from an array but it's pretty simple to use a custom function.
One day array_remove() might become part of PHP and will likely be a reserved function name, hence the unobvious choice for this function's names.
<?
function arem($array,$value){
$holding=array();
foreach($array as $k => $v){
if($value!=$v){
$holding[$k]=$v;
}
}
return $holding;
}
function akrem($array,$key){
$holding=array();
foreach($array as $k => $v){
if($key!=$k){
$holding[$k]=$v;
}
}
return $holding;
}
$lunch = array('sandwich' => 'cheese', 'cookie'=>'oatmeal','drink' => 'tea','fruit' => 'apple');
echo '<pre>';
print_r($lunch);
$lunch=arem($lunch,'apple');
print_r($lunch);
$lunch=akrem($lunch,'sandwich');
print_r($lunch);
echo '</pre>';
?>
(remove 9's in email)
based on worldclimb's arem(), here is a recursive array value removal tool that can work with multidimensional arrays.
function remove_from_array($array,$value){
$clear = true;
$holding=array();
foreach($array as $k => $v){
if (is_array($v)) {
$holding [$k] = remove_from_array ($v, $value);
}
elseif ($value == $v) {
$clear = false;
}
elseif($value != $v){
$holding[$k]=$v; // removes an item by combing through the array in order and saving the good stuff
}
}
if ($clear) return $holding; // only pass back the holding array if we didn't find the value
}
remember that array_slice returns an array with the current element. you must use array_slice($array, $index+1) if you want to get the next elements.
Using the varname function referenced from the array_search page, submitted by dcez at land dot ru. I created a multi-dimensional array splice function. It's usage is like so:
$array['admin'] = array('blah1', 'blah2');
$array['voice'] = array('blah3', 'blah4');
array_cut('blah4', $array);
...Would strip blah4 from the array, no matter where the position of it was in the array ^^ Returning this...
Array ( [admin] => Array ( [0] => blah1 [1] => blah2 ) [voice] => Array ( [0] => blah3 ) )
Here is the code...
<?php
function varname ($var)
{
// varname function by dcez at land dot ru
return (isset($var)) ? array_search($var, $GLOBALS) : false;
}
function array_cut($needle, $haystack)
{
foreach ($haystack as $k => $v)
{
for ($i=0; $i<count($v); $i++)
if ($v[$i] === $needle)
{
return array_splice($GLOBALS[varname($haystack)][$k], $i, 1);
break; break;
}
}
?>
Check out dreamevilconcept's forum for more innovative creations!
To save the sort order of a numeric index in the array. Version php =>5.5.26
/*
Example
*/
$arr = array( "1" =>2, "2" =>3 , "3" =>5 );
print_r(array_slice($arr,1,null,true));
/*
Result
Array
(
[2] => 3
[3] => 5
)
*/
The documentation doesn't say it, but if LENGTH is ZERO, then the result is an empty array [].
<?php
/**
* Reorders an array by keys according to a list of values.
* @param array $array the array to reorder. Passed by reference
* @param array $list the list to reorder by
* @param boolean $keepRest if set to FALSE, anything not in the $list array will be removed.
* @param boolean $prepend if set to TRUE, will prepend the remaining values instead of appending them
* @author xananax AT yelostudio DOT com
*/
function array_reorder(array &$array,array $list,$keepRest=TRUE,$prepend=FALSE,$preserveKeys=TRUE){
$temp = array();
foreach($list as $i){
if(isset($array[$i])){
$tempValue = array_slice(
$array,
array_search($i,array_keys($array)),
1,
$preserveKeys
);
$temp[$i] = array_shift($tempValue);
unset($array[$i]);
}
}
$array = $keepRest ?
($prepend?
$array+$temp
:$temp+$array
)
: $temp;
}
/** exemple ** /
$a = array(
'a' => 'a',
'b' => 'b',
'c' => 'c',
'd' => 'd',
'e' => 'e'
);
$order = array('c','b','a');
array_reorder($a,$order,TRUE);
echo '<pre>';
print_r($a);
echo '</pre>';
/** exemple end **/
?>
<?php
// Combines two arrays by inserting one into the other at a given position then returns the result
function array_insert($src, $dest, $pos) {
if (!is_array($src) || !is_array($dest) || $pos <= 0) return FALSE;
return array_merge(array_slice($dest, 0, $pos), $src, array_slice($dest, $pos));
}
?>
<?php
/**
* @desc
* Combines two arrays by inserting one into the other at a given position then
* returns the result.
*
* @since 2007/10/04
* @version v0.7 2007/10/04 18:47:52
* @author AexChecker <AexChecker@yahoo.com>
* @param array $source
* @param array $destination
* @param int [optional] $offset
* @param int [optional] $length
* @return array
*/
function array_insert($source, $destination, $offset = NULL, $length = NULL) {
if (!is_array($source) || empty($source)) {
if (is_array($destination) && !empty($destination)) {
return $destination;
}
return array();
}
if (is_null($offset)) {
return array_merge($destination, $source);
}
$offset = var2int($offset);
if (is_null($length)) {
if ($offset === 0) {
return array_merge($source, array_slice($destination, 1));
}
if ($offset === -1) {
return array_merge(array_slice($destination, 0, -1), $source);
}
return array_merge(
array_slice($destination, 0, $offset),
$source,
array_slice($destination, ++$offset)
);
}
if ($offset === 0) {
return array_merge($source, array_slice($destination, $length));
}
$destination_count = count($destination);
$length = var2int($length);
if ($offset > 0) {
if ($destination_count - $offset < 1) {
return array_merge($destination, $source);
}
} else{
if (($t = $destination_count + $offset) < 1) {
return array_merge($source, $destination);
}
$offset = $t;
}
if ($length > 0) {
$length+= $offset;
} elseif ($length < 0 && !($length * -1 < $destination_count)) {
return $source;
} else {
$length = $offset;
}
return array_merge(
array_slice($destination, 0, $offset),
$source,
array_slice($destination, $length)
);
}
?>
/**
* Remove a value from a array
* @param string $val
* @param array $arr
* @return array $array_remval
*/
function array_remval($val, &$arr)
{
$array_remval = $arr;
for($x=0;$x<count($array_remval);$x++)
{
$i=array_search($val,$array_remval);
if (is_numeric($i)) {
$array_temp = array_slice($array_remval, 0, $i );
$array_temp2 = array_slice($array_remval, $i+1, count($array_remval)-1 );
$array_remval = array_merge($array_temp, $array_temp2);
}
}
return $array_remval;
}
$stack=Array('apple','banana','pear','apple', 'cherry', 'apple');
array_remval("apple", $stack);
//output: Array('banana','pear', 'cherry')
Sometimes you need to pick certain non-integer and/or non-sequential keys out of an array. Consider using the array_pick() implementation below to pull specific keys, in a specific order, out of a source array:
<?php
$a = array ('a' => 1, 'b' => 2, 'c' => 3, 'd' => 4);
$b = array_pick($a, array ('d', 'b'));
// now:
// $a = array ('a' => 1, 'c' => '3');
// $b = array ('d' => 4, 'b' => '2');
function &array_pick(&$array, $keys)
{
if (! is_array($array)) {
trigger_error('First parameter must be an array', E_USER_ERROR);
return false;
}
if (! (is_array($keys) || is_scalar($keys))) {
trigger_error('Second parameter must be an array of keys or a scalar key', E_USER_ERROR);
return false;
}
if (is_array($keys)) {
// nothing to do
} else if (is_scalar($keys)) {
$keys = array ($keys);
}
$resultArray = array ();
foreach ($keys as $key) {
if (is_scalar($key)) {
if (array_key_exists($key, $array)) {
$resultArray[$key] = $array[$key];
unset($array[$key]);
}
} else {
trigger_error('Supplied key is not scalar', E_USER_ERROR);
return false;
}
}
return $resultArray;
}
?>
Note that offset is not the same thing as key. Offset always starts at 0, while keys might be any number.
So this:
<?php print_r(array_slice(array(0 => 0, 5 => 5, 13 => 13),1)); ?>
will result in this:
Array
(
[0] => 5
[1] => 13
)
If you specify the fourth argument (to not reassign the keys), then there appears to be no way to get the function to return all values to the end of the array. Assigning -0 or NULL or just putting two commas in a row won't return any results.
If you want to remove a specified entry from an array i made this mwethod...
<?php
$array = array("Entry1","entry2","entry3");
$int = 3; //Number of entries in the array
$int2 = 0; //Starter array spot... it will begine its search at 0.
$del_num = 1; //Represents the second entry in the array... which is the one we will happen to remove this time... i.e. 0 = first entry, 1 = second entry, 2 = third...........
$newarray = array(); //Empty array that will be the new array minus the specified entry...
print_r($array) . "<br>"; //print original array contents
print_r($newarray). "<br>"; //print the new empty array
do
{
$user = $array[$int2];
$key = array_search($user, $array);
if ($key == $del_num)
{
}
else
{
$newarray[] = $array[$int2];
}
$int2 = $int2 + 1;
} while ($int2 < $int);
print_r($newarray). "<br>"; //print the new array
?>
just a little tip.
to preserve keys without providing length: use NULL
array_slice($array, $my_offset, NULL, true);
I was trying to find a good way to find the previous several and next several results from an array created in a MySQL query. I found that most MySQL solutions to this problem were complex. Here is a simple function that returns the previous and next rows from the array.
<?php
/*
** function array_surround by Jamon Holmgren of ClearSight Design
** Version 1.0 - 4/10/2009
** Please direct comments and questions to my first name at symbol clearsightdesign.com
**
** Returns an array with only the $before and $after number of results
** This is set to work best with MySQL data results
** Use this to find the rows immediately before and after a particular row, as many as you want
**
** Example usage:
** $mysql_ar is an array of results from a MySQL query and the current id is $cur_id
** We want to get the row before this one and five rows afterward
**
** $near_rows = array_surround($mysql_ar, "id", $cur_id, 1, 5)
**
** Previous row is now $near_rows[-1]
** Current row is now $near_rows[0]
** Next row is $near_rows[1] ... etc
** If there is no previous row, $near_rows[-1] will not be set...test for it with is_array($near_rows[-1])
**
*/
function array_surround($src_array, $field, $value, $before = 1, $after = 1) {
if(is_array($src_array)) {
// reset all the keys to 0 through whatever in case they aren't sequential
$new_array = array_values($src_array);
// now loop through and find the key in array that matches the criteria in $field and $value
foreach($new_array as $k => $s) {
if($s[$field] == $value) {
// Found the one we wanted
$ck = $k; // put the key in the $ck (current key)
break;
}
}
if(isset($ck)) { // Found it!
$result_start = $ck - $before; // Set the start key
$result_length = $before + 1 + $after; // Set the number of keys to return
if($result_start < 0) { // Oops, start key is before first result
$result_length = $result_length + $result_start; // Reduce the number of keys to return
$result_start = 0; // Set the start key to the first result
}
$result_temp = array_slice($new_array, $result_start, $result_length); // Slice out the results we want
// Now we have an array, but we want array[-$before] to array[$after] not 0 to whatever.
foreach($result_temp as $rk => $rt) { // set all the keys to -$before to +$after
$result[$result_start - $ck + $rk] = $rt;
}
return $result;
} else { // didn't find it!
return false;
}
} else { // They didn't send an array
return false;
}
}
?>
I hope you find this useful! I welcome constructive criticism or comments or of course praise ;) -- just e-mail me.
- Jamon Holmgren