After having problems with fwrite() returning 0 in cases where one would fully expect a return value of false, I took a look at the source code for php's fwrite() itself. The function will only return false if you pass in invalid arguments. Any other error, just as a broken pipe or closed connection, will result in a return value of less than strlen($string), in most cases 0.
Therefore, looping with repeated calls to fwrite() until the sum of number of bytes written equals the strlen() of the full value or expecting false on error will result in an infinite loop if the connection is lost.
This means the example fwrite_stream() code from the docs, as well as all the "helper" functions posted by others in the comments are all broken. You *must* check for a return value of 0 and either abort immediately or track a maximum number of retries.
Below is the example from the docs. This code is BAD, as a broken pipe will result in fwrite() infinitely looping with a return value of 0. Since the loop only breaks if fwrite() returns false or successfully writes all bytes, an infinite loop will occur on failure.
<?php
// BROKEN function - infinite loop when fwrite() returns 0s
function fwrite_stream($fp, $string) {
for ($written = 0; $written < strlen($string); $written += $fwrite) {
$fwrite = fwrite($fp, substr($string, $written));
if ($fwrite === false) {
return $written;
}
}
return $written;
}
?>
fwrite
(PHP 4, PHP 5, PHP 7, PHP 8)
fwrite — Écrit un fichier en mode binaire
Description
fwrite() écrit le contenu de la chaîne
data dans le fichier pointé par
stream.
Liste de paramètres
Valeurs de retour
fwrite() retourne le nombre d'octets écrits ou false si une erreur survient.
Erreurs / Exceptions
La fonction fwrite() emet une E_WARNING si une erreur survient.
Historique
| Version | Description |
|---|---|
| 8.0.0 |
length est désormais nullable.
|
Exemples
Exemple #1 Exemple avec fwrite()
<?php
$filename = 'test.txt';
$somecontent = "Ajout de chaîne dans le fichier\n";
// Assurons nous que le fichier est accessible en écriture
if (is_writable($filename)) {
// Dans notre exemple, nous ouvrons le fichier $filename en mode d'ajout
// Le pointeur de fichier est placé à la fin du fichier
// c'est là que $somecontent sera placé
if (!$fp = fopen($filename, 'a')) {
echo "Impossible d'ouvrir le fichier ($filename)";
exit;
}
// Ecrivons quelque chose dans notre fichier.
if (fwrite($fp, $somecontent) === FALSE) {
echo "Impossible d'écrire dans le fichier ($filename)";
exit;
}
echo "L'écriture de ($somecontent) dans le fichier ($filename) a réussi";
fclose($fp);
} else {
echo "Le fichier $filename n'est pas accessible en écriture.";
}
?>Notes
Note:
Le fait d'écrire dans un flux peut se terminer avant que la chaîne complète ne soit écrite. La valeur retournée par la fonction fwrite() peut être vérifiée comme ceci :
<?php
function fwrite_stream($fp, $string) {
for ($written = 0; $written < strlen($string); $written += $fwrite) {
$fwrite = fwrite($fp, substr($string, $written));
if ($fwrite === false) {
return $fwrite;
}
}
return $written;
}
?>
Note:
Sur les systèmes qui font la différence entre les fichiers binaires et les fichiers textes (par exemple, Windows), le fichier doit être ouvert avec l'option 'b' inclus dans le paramètre de mode de fopen().
Note:
Si
streamest ouvert en mode ajout (append), fwrite() sera atomique (sauf si la taille dedataexcède la taille du bloc du système de fichiers, sur quelques plates-formes, et tant que le fichier se trouve sur le système de fichiers local). Ainsi, il n'est pas nécessaire d'utiliser la fonction flock() sur une ressource avant d'appeler la fonction fwrite() ; toutes les données seront écrites sans interruption.
Note:
Si l'on écrit 2 fois dans le fichier, les données seront ajoutées à la fin du fichier ; cela signifie que l'exemple suivant ne donnera pas le résultat attendu :
<?php
$fp = fopen('data.txt', 'w');
fwrite($fp, '1');
fwrite($fp, '23');
fclose($fp);
// le contenu de 'data.txt' est maintenant 123 et non 23 !
?>
Voir aussi
- fread() - Lecture du fichier en mode binaire
- fopen() - Ouvre un fichier ou une URL
- fsockopen() - Ouvre un socket de connexion Internet ou Unix
- popen() - Crée un processus de pointeur de fichier
- file_get_contents() - Lit tout un fichier dans une chaîne
- pack() - Compacte des données dans une chaîne binaire
add a note
User Contributed Notes 33 notes
nate at frickenate dot com ¶
14 years ago
divinity76 at gmail dot com ¶
3 years ago
if you need a function that writes all data, maybe try
<?php
/**
* writes all data or throws
*
* @param mixed $handle
* @param string $data
* @throws \RuntimeException when fwrite returned <1 but still more data to write
* @return void
*/
/*private static*/ function fwrite_all($handle, string $data): void
{
$original_len = strlen($data);
if ($original_len > 0) {
$len = $original_len;
$written_total = 0;
for (;;) {
$written_now = fwrite($handle, $data);
if ($written_now === $len) {
return;
}
if ($written_now < 1) {
throw new \RuntimeException("could only write {$written_total}/{$original_len} bytes!");
}
$written_total += $written_now;
$data = substr($data, $written_now);
$len -= $written_now;
// assert($len > 0);
// assert($len === strlen($data));
}
}
}
niklesh at example dot com ¶
4 years ago
$handles can also be used to output in console like below example
fwrite(STDOUT, "Console Output");
Anonymous ¶
8 years ago
// you want copy dummy file or send dummy file
// it is possible to send a file larger than 4GB and write without FSEEK used is limited by PHP_INT_MAX. it works on a system 32-bit or 64-bit
// fwrite and fread non pas de limite de position du pointeur
<?php
$gfz = filesize_dir("d:\\starwars.mkv"); // 11,5GB
echo 'Z:',$gfz,PHP_EOL;
$fz = fopen('d:\\test2.mkv', 'wb');
$fp = fopen('d:\\starwars.mkv', 'rb');
echo PHP_EOL;
$a = (float) 0;
while(($l=fread($fp, 65536))) {
fwrite($fz, $l);
if(($a+=65536)%5) echo "\r", '>', $a, ' : ' , $gfz;
}
fclose($fp);
fclose($fz);
// test2.mkv' is 11,5GB
function filesize_dir($file) {
exec('dir ' . $file, $inf);
$size_raw = $inf[6];
$size_exp = explode(" ",$size_raw);
$size_ext = $size_exp[19];
$size_int = (float) str_replace(chr(255), '', $size_ext);
return $size_int;
}
?>
dharris dot nospam at removethispart dot drh dot net ¶
16 years ago
Some people say that when writing to a socket not all of the bytes requested to be written may be written. You may have to call fwrite again to write bytes that were not written the first time. (At least this is how the write() system call in UNIX works.)
This is helpful code (warning: not tested with multi-byte character sets)
function fwrite_with_retry($sock, &$data)
{
$bytes_to_write = strlen($data);
$bytes_written = 0;
while ( $bytes_written < $bytes_to_write )
{
if ( $bytes_written == 0 ) {
$rv = fwrite($sock, $data);
} else {
$rv = fwrite($sock, substr($data, $bytes_written));
}
if ( $rv === false || $rv == 0 )
return( $bytes_written == 0 ? false : $bytes_written );
$bytes_written += $rv;
}
return $bytes_written;
}
Call this like so:
$rv = fwrite_with_retry($sock, $request_string);
if ( ! $rv )
die("unable to write request_string to socket");
if ( $rv != strlen($request_string) )
die("sort write to socket on writing request_string");
synnus at gmail dot com ¶
8 years ago
// you want copy dummy file or send dummy file
// it is possible to send a file larger than 4GB and write without FSEEK used is limited by PHP_INT_MAX. it works on a system 32-bit or 64-bit
// fwrite and fread non pas de limite de position du pointeur
<?php
$gfz = filesize_dir("d:\\starwars.mkv"); // 11,5GB
echo 'Z:',$gfz,PHP_EOL;
$fz = fopen('d:\\test2.mkv', 'wb');
$fp = fopen('d:\\starwars.mkv', 'rb');
echo PHP_EOL;
$a = (float) 0;
while(($l=fread($fp, 65536))) {
fwrite($fz, $l);
if(($a+=65536)%5) echo "\r", '>', $a, ' : ' , $gfz;
}
fclose($fp);
fclose($fz);
// test2.mkv' is 11,5GB
function filesize_dir($file) {
exec('dir ' . $file, $inf);
$size_raw = $inf[6];
$size_exp = explode(" ",$size_raw);
$size_ext = $size_exp[19];
$size_int = (float) str_replace(chr(255), '', $size_ext);
return $size_int;
}
?>
chedong at hotmail dot com ¶
21 years ago
the fwrite output striped the slashes if without length argument given, example:
<?php
$str = "c:\\01.txt";
$out = fopen("out.txt", "w");
fwrite($out, $str);
fclose($out);
?>
the out.txt will be:
c:^@1.txt
the '\\0' without escape will be '\0' ==> 0x00.
the correct one is change fwrite to:
fwrite($out, $str, strlen($str));
Chris Blown ¶
21 years ago
Don't forget to check fwrite returns for errors! Just because you successfully opened a file for write, doesn't always mean you can write to it.
On some systems this can occur if the filesystem is full, you can still open the file and create the filesystem inode, but the fwrite will fail, resulting in a zero byte file.
Anonymous ¶
15 years ago
If you write with the pointer in the middle of a file, it overwrites what's there rather than shifting the rest of the file along.
php at biggerthanthebeatles dot com ¶
21 years ago
Hope this helps other newbies.
If you are writing data to a txt file on a windows system and need a line break. use \r\n . This will write hex OD OA.
i.e.
$batch_data= "some data... \r\n";
fwrite($fbatch,$batch_data);
The is the equivalent of opening a txt file in notepad pressing enter and the end of the line and saving it.
synnus at gmail dot com ¶
3 years ago
<?php
/*
Write to offset with positive offset
PHP_INT_MIN / PHP_INT_MAX 32-bit PHP: -2,147,483,648 to +2,147,483,647
PHP_INT_MIN / PHP_INT_MAX 64-bit PHP: -9,223,372,036,854,775,808 to +9,223,372,036,854,775,807
File_writing 32bit 0 -> 4 294 967 295
File_writing 64bit 0 -> 18 446 744 073 709 551 615
$handel = fopen( myfilname );
$t_f_max is max file size in BYTE ex: 19998
$offset is position in offset BYTE ex : 19995
$bin your binary data you want write
Work in 32bit and 64bit
*/
function File_writing($handel,$t_f_max,$offset,$bin) {
($offset > PHP_INT_MAX) ? fseek($handel,-($t_f_max-$offset),SEEK_END) : fseek($handel,$offset,SEEK_SET);
fwrite($handel,$bin);
return $offset;
}
?>
Jon Haynes ¶
13 years ago
Be careful of using reserved Windows filenames in fwrite operations.
<?php
$fh = fopen('prn.txt', 'w');
fwrite($fh, 'wtf?');
echo 'done' . PHP_EOL;
?>
The above script will hang (tested on Windows 7) before it can echo 'done'.
This is due to another 'feature' of our favourite operating system where filenames like prn.xxx, con.xxx, com1.xxx and aux.xxx (with xxx being any filename extension) are Windows reserved device names. Attempts to create/read/write to these files hangs the interpreter.
qrworld.net ¶
10 years ago
Here you have a function found on the website http://softontherocks.blogspot.com/2014/11/funcion-para-escribir-en-un-fichero-log.html with an example of how to make a log file.
The function is this:
function writeLog($data) {
list($usec, $sec) = explode(' ', microtime());
$datetime = strftime("%Y%m%d %H:%M:%S",time());
$msg = "$datetime'". sprintf("%06s",intval($usec*1000000)).": $data";
$save_path = 'foo.txt';
$fp = @fopen($save_path, 'a'); // open or create the file for writing and append info
fputs($fp, "$msg\n"); // write the data in the opened file
fclose($fp); // close the file
}
chill at cuna dot org ¶
20 years ago
In PHP 4.3.7 fwrite returns 0 rather than false on failure.
The following example will output "SUCCESS: 0 bytes written" for existing file test.txt:
$fp = fopen("test.txt", "rw");
if (($bytes_written = fwrite($fp, "This is a test")) === false) {
echo "Unable to write to test.txt\n\n";
} else {
echo "SUCCESS: $bytes_written bytes written\n\n";
}
dominic at varspool dot com ¶
10 years ago
Note that the optional $length argument is expected to be an int, and cannot be skipped by passing null.
That is, `fwrite($handle, $string, null)` is treated as `fwrite($handle, $string, 0)`, and will write zero bytes, not the whole string.
2184364 at gmail dot com ¶
5 years ago
//fwrite writes over, i.e. this example (win) may be misleading:
$file = 'e:/1.txt';
file_put_contents($file, 'hello'.chr(1).'0df6ac'.chr(0));
$fp = fopen($file, 'r+b');
$str = fread($fp, filesize($file));
$str = strtr($str, [chr(0)=>'']);
echo $str.PHP_EOL;//hello0df6ac
fseek($fp, 0);//указатель в начало
fwrite($fp, $str);
fclose($fp);
//add ftruncate ($ fp, 0);
//this will overwrite the file:
file_put_contents($file, 'hello'.chr(1).'0df6ac'.chr(0));
$fp = fopen($file, 'r+b');
$str = fread($fp, filesize($file));
$str = strtr($str, [chr(0)=>'']);
echo $str.PHP_EOL;//hello0df6ac
ftruncate ($ fp, 0);
fseek($fp, 0);//указатель в начало
fwrite($fp, $str);
fclose($fp);
Jake Roberts ¶
21 years ago
Use caution when using:
$content = fread($fh, filesize($fh)) or die "Error Reading";
This will cause an error if the file you are reading is zero length.
Intead use:
if ( false === fread($fh, filesize($fh)) ) die "Error Reading";
Thus it will be successful on reading zero bytes but detect and error returned as FALSE.
james at nicolson dot biz ¶
19 years ago
I could'nt quite get MKP Dev hit counter to work.... this is how I modified it
<?
function hitcount()
{
$file = "counter.txt";
if ( !file_exists($file)){
touch ($file);
$handle = fopen ($file, 'r+'); // Let's open for read and write
$count = 0;
}
else{
$handle = fopen ($file, 'r+'); // Let's open for read and write
$count = fread ($handle, filesize ($file));
settype ($count,"integer");
}
rewind ($handle); // Go back to the beginning
/*
* Note that we don't have problems with 9 being fewer characters than
* 10 because we are always incrementing, so we will always write at
* least as many characters as we read
**/
fwrite ($handle, ++$count); // Don't forget to increment the counter
fclose ($handle); // Done
return $count;
}
?>
Anonymous ¶
10 years ago
Bad example!
The result of fwrite could be either FALSE or 0.
So it should be correctly:
if (false === fwrite($handle, $somecontent)) { ....
bluevd at gmail dot com ¶
20 years ago
Watch out for mistakes in writting a simple code for a hit counter:
<?php
$cont=fopen('cont.txt','r');
$incr=fgets($cont);
//echo $incr;
$incr++;
fclose($cont);
$cont=fopen('cont.txt','a');
fwrite($cont,$incr);
fclose($cont);
?>
Why? notice the second fopen -> $cont=fopen('cont.txt','a');
it opens the file in writting mode (a). And when it ads the incremented
value ( $incr ) it ads it ALONG the old value... so opening the counter
page about 5 times will make your hits number look like this
012131214121312151.21312141213E+ .... you get the piont.
nasty, isn't it? REMEMBER to open the file with the 'w' mode (truncate
the file to 0). Doing this will clear the file content and it will make sure that
your counter works nice. This is the final code
<?php
$cont=fopen('cont.txt','r');
$incr=fgets($cont);
//echo $incr;
$incr++;
fclose($cont);
$cont=fopen('cont.txt','w');
fwrite($cont,$incr);
fclose($cont);
?>
Notice that this work fine =)
XU (alias Iscu Andrei)
ceo at l-i-e dot com ¶
16 years ago
If you are trying to write binary/structured data (e.g., a 4-byte sequence for an (int)) to a file, you will need to use:
http://php.net/pack
james at facepwn dot com ¶
16 years ago
if (is_writable($filename)) {
Could also be
if (is_writable($filename) or die ("Can not write to ".$filename)) {
oktavianus dot programmer at gmail dot com ¶
15 years ago
this the another sample to use fwrite with create a folder and create the txt file.
<?php
$mypath="testdir\\subdir\\test";
mkdir($mypath,0777,TRUE);
$filename = $mypath.'\test.txt';
$handle = fopen($filename,"x+");
$somecontent = "Add this to the file Oktavianus";
fwrite($handle,$somecontent);
echo "Success";
fclose($handle);
?>
please try...
Oktavianus
Will at EnigmaChannel dot com ¶
19 years ago
Using fwrite to write to a file in your include folder...
PHP does not recognise the permissions setting for the file until you restart the server... this script works fine. (still have to create the blank text file first though...it is not created automatically) On OS X Server..
Using the 1 in fopen tells php to look for the file in your include folder. Change your include folder by altering include_path in php.ini
On OS X Server, php.ini is in private/etc/php.ini.default
copy the file and call it php.ini
the default include path is usr/lib/php
(All these folders are hidden - use TinkerTool to reveal them)
<?php
$file = fopen('textfile.txt', 'a', 1);
$text="\n Your text to write \n ".date('d')."-".date('m')."-".date('Y')."\n\n";
fwrite($file, $text);
fclose($file);
?>
David Spector ¶
8 years ago
This may save you time: note that neither "binary-safe file write" nor the use of b mode in fopen mean that fwrite can write binary. It can only write strings (or a single character). For example, attempting to write the byte 0x1 using fwrite results in writing the byte value 0x31.
If you wish to write binary values (bits, bytes, integers, etc.), use a statement like fprintf($Res, "%c", 0x1); . This statement will write a byte to the current offset in the file without converting it to a character (in this case, it will write 0x1).
chad 0x40 herballure 0x2e com ¶
17 years ago
Remember to check the return value of fwrite(). In particular, writing into a socket can return fewer bytes than requested, and you'll have to try again with the remainder of your data.
sheyh ¶
19 years ago
if you want to create quickly and without fopen use system, exec
system('echo "blahblah" > /path/file');
zaccraven at junk.com ¶
18 years ago
Use this to get a UTF-8 Unicode CSV file that opens properly in Excel:
$tmp = chr(255).chr(254).mb_convert_encoding( $tmp, 'UTF-16LE', 'UTF-8');
$write = fwrite( $filepath, $tmp );
Use a tab character, not comma, to seperate the fields in the $tmp.
Credit for this goes to someone called Eugene Murai, I found this solution by him after searching for several hours.
MKP Dev ¶
19 years ago
bluevd at gmail dot com mentioned a hit counter. In his/her implementation, the file is first opened, read, closed, then opened +truncated, then written, and closed again. An alternative to this is:
<?php
$file = 'counter.txt or whatever';
$handle = fopen ($file, 'r+'); // Let's open for read and write
$count = int (fread ($handle, filesize ($file)));
// We don't want to think it's a string and try appending
echo "Number of hits $count";
rewind ($handle); // Go back to the beginning
/*
* Note that we don't have problems with 9 being fewer characters than
* 10 because we are always incrementing, so we will always write at
* least as many characters as we read
**/
fwrite ($handle, ++$count); // Don't forget to increment the counter
fclose ($handle); // Done
?>
Andi ¶
21 years ago
[Ed. Note:
The runtime configuration setting auto_detect_line_endings should solve this problem when set to On.]
I figured out problems when writing to a file using \r as linebreak, after that file() wasn't able to read the data from that file.
Using \n solved the problem.
kzevian at cybercable dot net dot mx ¶
19 years ago
I needed to append, but I needed to write on the file's beginning, and after some hours of effort this worked for me:
$file = "file.txt";
if (!file_exists("file.txt")) touch("file.txt");
$fh = fopen("file.txt", "r");
$fcontent = fread($fh, filesize("file.txt"));
$towrite = "$newcontent $fcontent";
$fh22 = fopen('file.txt', 'w+');
fwrite($fh2, $towrite);
fclose($fh);
fclose($fh2);
elinor_hust at REMOVETHIS dot hotmail dot com ¶
16 years ago
Remember to use double-quotes when outputting special characters such as \n or they come out literally.
...
cutmaster at fearlesss dot com ¶
17 years ago
For those who, like me, lost a lot of minutes (hours) to understand why fwrite doesn't create a real utf-8 file, here's the explanation I've found :
I tried to do something like this :
<?php
$myString = utf8_encode("Test with accents éèàç");
$fh=fopen('test.xml',"w");
fwrite($fh,$myString);
fclose($fh);
?>
For a mysterious reason, the resulted file shows the accent without the utf-8 conversion.
I tried the binary, mode, etc. etc. And finally I've found it :
It seems that fwrite NEEDS to have the utf8_encode function INSIDE its parameters like this, to understand it must create a non-text only file :
<?php
$myString = "Test with accents éèàç";
$fh=fopen('test.xml',"w");
fwrite($fh,utf8_encode($myString));
fclose($fh);
?>
Hope this will help
