For all those of you which are "surprised" by the padding (even though it is mentioned in the description of the method) please do not just "strip away everything which I do not understand".
The approach with rtrim, rtrim "\0", removing all charcodes < 16, etc. are all wrong.
The PKCS #7 padding works just as described in RFC 5652.
To remove it, just look at the last byte of the message, and it will tell you how many bytes to remove.
For example, if the last byte is equal to \0A, then remove 10 bytes.
mdecrypt_generic
(PHP 4 >= 4.0.2, PHP 5, PHP 7 < 7.2.0, PECL mcrypt >= 1.0.0)
mdecrypt_generic — Déchiffre les données
Avertissement
Cette fonction est OBSOLÈTE à partir de PHP 7.1.0 et a été SUPPRIMÉE à partir de PHP 7.2.0. Dépendre de cette fonction est fortement déconseillé.
Description
Déchiffre les données data. Notez que la longueur de
la chaîne déchiffrée peut être plus longue que la chaîne originale, car elle
peut avoir été complétée par des caractères.
Liste de paramètres
-
td -
Un descripteur de chiffrement, retourné par la fonction mcrypt_module_open()
-
data -
Les données chiffrées.
Valeurs de retour
Retourne la chaîne déchiffré.
Exemples
Exemple #1 Exemple avec mdecrypt_generic()
<?php
/* Données */
$key = 'Ceci est une très longue clé de chiffrement, et même trop longue';
$plain_text = 'Ceci sont des données importantes';
/* Ouvre le module et crée un VI */
$td = mcrypt_module_open('des', '', 'ecb', '');
$key = substr($key, 0, mcrypt_enc_get_key_size($td));
$iv_size = mcrypt_enc_get_iv_size($td);
$iv = mcrypt_create_iv($iv_size, MCRYPT_RAND);
/* Initialise le module de chiffrement */
if (mcrypt_generic_init($td, $key, $iv) != -1) {
/* Chiffre les données */
$c_t = mcrypt_generic($td, $plain_text);
mcrypt_generic_deinit($td);
/* Réinitialise les tampons pour le déchiffrement */
mcrypt_generic_init($td, $key, $iv);
$p_t = mdecrypt_generic($td, $c_t);
/* Nettoye */
mcrypt_generic_deinit($td);
mcrypt_module_close($td);
}
if (strncmp($p_t, $plain_text, strlen($plain_text)) == 0) {
echo "ok\n";
} else {
echo "erreur\n";
}
?>L'exemple ci-dessus montre comment vérifier que les données avant chiffrement sont bien les mêmes que celles après chiffrement/déchiffrement. Il est très important de réinitialiser le buffer de chiffrement avec mcrypt_generic_init() avant que nous ne déchiffriez les données.
Le gestionnaire de déchiffrement doit toujours être initialisé par la fonction mcrypt_generic_init() avec une clé et un VI avant d'appeler cette fonction. Lorsque le chiffrement est fait, il faut que vous libériez les données chiffrées en appelant mcrypt_generic_deinit(). Voir mcrypt_module_open() pour un exemple.
Voir aussi
- mcrypt_generic() - Chiffre les données
- mcrypt_generic_init() - Initialise tous les buffers nécessaires
- mcrypt_generic_deinit() - Prépare le module pour le déchargement
add a note
User Contributed Notes 11 notes
jakub dot lopuszanski at nasza-klasa dot pl ¶
11 years ago
nytro_rst at yahoo dot com ¶
15 years ago
<?php
// Parameters:
// $text = The text that you want to encrypt.
// $key = The key you're using to encrypt.
// $alg = The algorithm.
// $crypt = 1 if you want to crypt, or 0 if you want to decrypt.
function cryptare($text, $key, $alg, $crypt)
{
$encrypted_data="";
switch($alg)
{
case "3des":
$td = mcrypt_module_open('tripledes', '', 'ecb', '');
break;
case "cast-128":
$td = mcrypt_module_open('cast-128', '', 'ecb', '');
break;
case "gost":
$td = mcrypt_module_open('gost', '', 'ecb', '');
break;
case "rijndael-128":
$td = mcrypt_module_open('rijndael-128', '', 'ecb', '');
break;
case "twofish":
$td = mcrypt_module_open('twofish', '', 'ecb', '');
break;
case "arcfour":
$td = mcrypt_module_open('arcfour', '', 'ecb', '');
break;
case "cast-256":
$td = mcrypt_module_open('cast-256', '', 'ecb', '');
break;
case "loki97":
$td = mcrypt_module_open('loki97', '', 'ecb', '');
break;
case "rijndael-192":
$td = mcrypt_module_open('rijndael-192', '', 'ecb', '');
break;
case "saferplus":
$td = mcrypt_module_open('saferplus', '', 'ecb', '');
break;
case "wake":
$td = mcrypt_module_open('wake', '', 'ecb', '');
break;
case "blowfish-compat":
$td = mcrypt_module_open('blowfish-compat', '', 'ecb', '');
break;
case "des":
$td = mcrypt_module_open('des', '', 'ecb', '');
break;
case "rijndael-256":
$td = mcrypt_module_open('rijndael-256', '', 'ecb', '');
break;
case "xtea":
$td = mcrypt_module_open('xtea', '', 'ecb', '');
break;
case "enigma":
$td = mcrypt_module_open('enigma', '', 'ecb', '');
break;
case "rc2":
$td = mcrypt_module_open('rc2', '', 'ecb', '');
break;
default:
$td = mcrypt_module_open('blowfish', '', 'ecb', '');
break;
}
$iv = mcrypt_create_iv(mcrypt_enc_get_iv_size($td), MCRYPT_RAND);
$key = substr($key, 0, mcrypt_enc_get_key_size($td));
mcrypt_generic_init($td, $key, $iv);
if($crypt)
{
$encrypted_data = mcrypt_generic($td, $text);
}
else
{
$encrypted_data = mdecrypt_generic($td, $text);
}
mcrypt_generic_deinit($td);
mcrypt_module_close($td);
return $encrypted_data;
}
?>
Ulysse ¶
10 years ago
Based on the information provided by "jakub dot lopuszanski at nasza-klasa dot pl" that in PKCS#7, the last byte contains the number of byte to remove (see RFC 5652, part 6.3), and for those like me who like to copy paste an already-made snippet:
<?php
function unpadPKCS7($data, $blocksize)
{
$last = substr($data, -1);
return substr($data, 0, strlen($data) - ord($last));
}
?>
Now you have no more reason to use rtrim() to remove the padding at the end of the result.
Anonymous ¶
15 years ago
Here's a quick snippet for removing PKCS7 padding:
<?php
function unpadPKCS7($data, $blockSize) {
$length = strlen ( $data );
if ($length > 0) {
$first = substr ( $data, - 1 );
if (ord ( $first ) <= $blockSize) {
for($i = $length - 2; $i > 0; $i --)
if (ord ( $data [$i] != $first ))
break;
return substr ( $data, 0, $i );
}
}
return $data;
}
?>
Peter Bailey ¶
12 years ago
We found that sometimes the resulting padding is not null characters "\0" but rather one of several control characters.
If you know your data is not supposed to have any trailing control characters "as we did" you can strip them like so.
<?php
$data = mdecrypt_generic( $cipher, $data );
// Strip trailing control-character padding
$data = preg_replace( "/\p{Cc}*$/u", "", $data );
?>
trashmail dot hashishin at gmail dot com ¶
14 years ago
Whenever you need to decrypt files encrypted with dot.net (and others?) you can use the following settings:
Encryption: 'rijndael-256'
Mode: 'cbc'
Padding-Mode: Zeros
iv: "yes"
encode the data with base64 to send them to your php script
robbie [at] averill [dot] co [dot] nz ¶
19 years ago
I have noticed that sometimes when the binary ciphertext is longer than the plaintext, the decrypted plaintext can have some little boxes/squares next to it as 'padding'. I also noticed that you can't cut and paste them to be able to edit them out, but i did find a solution.
Just call rtrim() around the string and it removes them.
Silvan ¶
17 years ago
It is generally not recommended to just use rtrim to remove the padding.
Use rtrim($str, "\0") for strings that do not end in "\0" or store the data length during encryption.
(Although data containing "\0" sometimes gets corrupted during encryption so these types of data actually should be packed.)
For example:
<?php
function encrypt($original_data)
{
$length = strlen($original_data);
$data_to_encrypt = $length.'|'.$original_data;
// Encrypt the data including its length.
// Do not save the length unencrypted, as this could be a (minor) security risk
}
function decrypt($cypher)
{
// Decrypt the cypher data first
// Next retrieve the original data
list($length, $padded_data) = explode('|', $decrypted_data, 2);
$original_data = substr($padded_data, 0, $length);
}
?>
php at pcwize dot com ¶
18 years ago
Just confirming the .DLL issues. With 4.3.4 you need the older .DLL. I'm guessing any version of PHP4 needs the older .DLL. With PHP5 you need the newer one.
drew at expressdynamics dot com ¶
19 years ago
On Win32 systems with PHP 5, you must use the newer libmcrypt.dll file, otherwise mdecrypt_generic will not work.
jon@jonroig dot com ¶
20 years ago
Here's a bit of encrypt/decrypt code.
If you're using this on the win32 platform, BEWARE! The latest DLL (19-Jan-2004) contains a bug that keeps mdecrypt_generic from functioning. Nearly drove me over the edge... The 30-Dec-2002 version seems to work with no trouble.
<?
$key = "this is a secret key";
$input = "Let us meet at 9 o'clock at the secret place.";
$td = mcrypt_module_open('tripledes', '', 'ecb', '');
$iv = mcrypt_create_iv (mcrypt_enc_get_iv_size($td), MCRYPT_RAND);
mcrypt_generic_init($td, $key, $iv);
$encrypted_data = mcrypt_generic($td, $input);
mcrypt_generic_deinit($td);
mcrypt_module_close($td);
echo "Encrypt: ".$encrypted_data;
echo "<br><br>";
$td = mcrypt_module_open('tripledes', '', 'ecb', '');
$iv = mcrypt_create_iv (mcrypt_enc_get_iv_size($td), MCRYPT_RAND);
$key = substr($key, 0, mcrypt_enc_get_key_size($td));
mcrypt_generic_init($td, $key, $iv);
$decrypted_data = mdecrypt_generic($td, $encrypted_data);
echo "Decrypt: ".$decrypted_data;
mcrypt_generic_deinit($td);
mcrypt_module_close($td);
?>
