extract

(PHP 4, PHP 5, PHP 7, PHP 8)

extract — Importa le variabili nella tabella dei simboli corrente da un array

Descrizione

extract(array &$array, int $flags = EXTR_OVERWRITE, string $prefix = ""): int

Importa le variabili nella tabella dei simboli corrente da un array.

Controlla ogni chiave per vedere se ha un nome di variabile valido. Controlla anche le collisioni con le variabili esistenti nella tabella dei simboli.

Avviso

Non usare extract() su dati non attendibili, come l'input dell'utente (per esempio $_GET, $_FILES).

Elenco dei parametri

array

Un array associativo. Questa funzione tratta le chiavi come nomi di variabili e i valori come valori di variabili. Per ogni coppia chiave/valore verrà creata una variabile nella tabella dei simboli corrente, soggetta ai parametri flags e prefix.

È necessario utilizzare un array associativo; un array indicizzato numericamente non produrrà risultati a meno che non si utilizzi EXTR_PREFIX_ALL o EXTR_PREFIX_INVALID.

flags

Il modo in cui vengono trattate le chiavi non valide/numeriche e le collisioni è determinato dai flag di estrazione. Può essere uno dei seguenti valori:

EXTR_OVERWRITE: In caso di collisione, sovrascrivi la variabile esistente.
EXTR_SKIP: In caso di collisione, non sovrascrivere la variabile esistente.
EXTR_PREFIX_SAME: In caso di collisione, anteporre al nome della variabile il prefisso prefix.
EXTR_PREFIX_ALL: Prefissa tutti i nomi delle variabili con prefix.
EXTR_PREFIX_INVALID: Aggiunge il prefisso prefix solo ai nomi di variabili non valide/numeriche.
EXTR_IF_EXISTS: Sovrascrive la variabile solo se esiste già nella tabella dei simboli corrente, altrimenti non fa nulla. Questo è utile per definire un elenco di variabili valide e quindi estrarre solo quelle variabili che sono state definite in $_REQUEST, per esempio.
EXTR_PREFIX_IF_EXISTS: Crea nomi di variabili con prefisso solo se la versione senza prefisso della stessa variabile esiste nella tabella dei simboli corrente.
EXTR_REFS: Estrae le variabili come riferimenti. Ciò significa effettivamente che i valori delle variabili importate fanno ancora riferimento ai valori del parametro array. Si può usare questo flag da solo o combinarlo con qualsiasi altro flag utilizzando l'OR dei flags.

Se flags non è specificato, si presume che sia EXTR_OVERWRITE.

prefix

Notare che prefix è richiesto solo se flags è EXTR_PREFIX_SAME, EXTR_PREFIX_ALL, EXTR_PREFIX_INVALID o EXTR_PREFIX_IF_EXISTS. Se il risultato con prefisso non è un nome di variabile valido, non viene importato nella tabella dei simboli. I prefissi vengono separati automaticamente dalla chiave dell'array da un carattere underscore.

Valori restituiti

Restituisce il numero di variabili importate con successo nella tabella dei simboli.

Esempi

Example #1 Esempio di extract()

Un possibile utilizzo di extract() è importare nella tabella dei simboli le variabili contenute in un array associativo restituito da wddx_deserialize().

<?php

/* Si supponga che $var_array sia un array restituito da
   wddx_deserialize */

$size = "grande";
$array_variabili = array("color" => "blu",
                         "size"  => "media",
                         "shape" => "sfera");
extract($array_variabili, EXTR_PREFIX_SAME, "wddx");

echo "$color, $size, $shape, $wddx_size\n";

?>

Il precedente esempio visualizzerà:

blu, grande, sfera, media

$size non è stato sovrascritto perché abbiamo specificato EXTR_PREFIX_SAME, che ha portato alla creazione di $wddx_size. Se fosse stato specificato EXTR_SKIP, allora $wddx_size non sarebbe nemmeno stato creato. EXTR_OVERWRITE avrebbe fatto sì che $size avesse il valore "medio" e EXTR_PREFIX_ALL avrebbe comportato nuove variabili con nomi $wddx_color, $wddx_size e $wddx_shape.

Note

Avviso

Non utilizzare extract() su dati non attendibili, come l'input dell'utente (per esempio $_GET, $_FILES, ecc.). In tal caso, assicurarsi di utilizzare uno dei valori di flags che non sovrascrivono come EXTR_SKIP e tenere presente che si dovrebbe estrarre nello stesso ordine definito in variables_order all'interno del php.ini.

Vedere anche:

compact() - Crea un array contenente variabili e il loro valore
list() - Assegna valori a delle variabili come se fossero un array

add a note

User Contributed Notes 31 notes

down

Michael Newton ¶

19 years ago


They say "If the result is not a valid variable name, it is not imported into the symbol table."

What they should say is that if _any_ of the results have invalid names, _none_ of the variables get extracted.

Under 4.3.10 on Windows 2000, I was pulling some mySQL records, but needed to convert two fields into IP addresses:
<?
extract(mysql_fetch_assoc(mysql_query('SELECT * FROM foo')));
extract(mysql_fetch_assoc(mysql_query('SELECT INET_NTOA(bar) AS bar, INET_NTOA(baz) FROM foo')));
?>

I had forgotten the second AS modifier in the SQL query.  Because it couldn't extract a variable called INET_NTOA(baz) into the symbol table, it didn't do either of them.

(BTW I don't normally stack functions up like that!  Just to make a short example!)

down

mrkhoa99 at gmail dot com ¶

6 years ago


We can use extract () function for Template Engine:

<?php
#Template.php

class Template
{
    protected $viewVars;

    public function renderPage($tpl)
    {
        ob_start();
        extract($this->viewVars, EXTR_SKIP);
        include $tpl;
        return ob_end_flush();
    }

    public function assign($arr)
    {
        foreach ($arr as $key => $value) {
            $this->viewVars[$key] = $value;
        }
        return $this;
    }
}

$template = new Template();
$template->assign(
   [ 'pageHeader' => 'Page Header', 'content' => 'This is the content page']
);
$template->renderPage('tpl.php');

#tpl.php

<h1><?= $pageHeader; ?></h1>
<p><?= $content ;?></p>

Output:

Page Header
This is the content page

down

FredLawl ¶

11 years ago


It is possible to use this as a way to create public attributes for a class.

<?php
class Foo {

  public function __construct ($array) {

      extract($array, EXTR_REFS);
      foreach ($array as $key => $value) {
          $this->$key = $$key;
          // Do: $this->key = $key; if $key is not a string.
      }

  }

}

$array = array(
    'valueOne'      => 'Test Value 1',
    'valueTwo'      => 'Test Value 2',
    'valueThree'    => 'Test Value 3'
);

$foo = new Foo($array);

// Works
echo $foo->valueOne; // Test Value 1
echo $foo->valueTwo; // Test Value 2

// Does not work!
echo $foo::$valueOne; // Fatal error:  Access to undeclared static property: Test::$valueOne
?>

down

Dan O'Donnell ¶

17 years ago


Following up on ktwombley at gmail dot com's post:

Presumably one easy way of dealing with this security issue is to use the EXTR_IF_EXISTS flag and make sure 

a) your define acceptable input variables beforehand (i.e. as empty variables)
b) Sanitise any user input to avoid unacceptable variable content. 

If you do these two things, then I'm not sure I see the difference between extract($_REQUEST,EXTR_IF_EXISTS); and assigning each of the variables by hand.

I'm not talking here about the idea of storing the variables in a database, just the immediately necessary steps to allow you to use extract on REQUEST arrays with relative safety.

down

dmikam ¶

10 years ago


I have made some tests to compare the speed of next constructions:
<?php

extract($ARRAY);

// vs. 

foreach($ARRAY as $key=>$value) 
    $$key = $value; 
?>

Surprisingly for me extract is 20%-80% slower then foreach construction. I don't really understand why, but it's so.

down

CertaiN ¶

10 years ago


[New Version]
This function is very useful for filtering complicated array structure.
Also, Some integer bitmasks and invalid UTF-8 sequence detection are available.

Code:
<?php
/**
 * @param  integer $type    Constant like INPUT_XXX.
 * @param  array   $default Default structure of the specified super global var.
 *                          Following bitmasks are available:
 *  + FILTER_STRUCT_FORCE_ARRAY - Force 1 dimensional array.
 *  + FILTER_STRUCT_TRIM        - Trim by ASCII control chars.
 *  + FILTER_STRUCT_FULL_TRIM   - Trim by ASCII control chars,
 *                                full-width and no-break space.
 * @return array            The value of the filtered super global var.
 */
define('FILTER_STRUCT_FORCE_ARRAY', 1);
define('FILTER_STRUCT_TRIM', 2);
define('FILTER_STRUCT_FULL_TRIM', 4);
function filter_struct_utf8($type, array $default) {
    static $func = __FUNCTION__;
    static $trim = "[\\x0-\x20\x7f]";
    static $ftrim = "[\\x0-\x20\x7f\xc2\xa0\xe3\x80\x80]";
    static $recursive_static = false;
    if (!$recursive = $recursive_static) {
        $types = array(
            INPUT_GET => $_GET,
            INPUT_POST => $_POST,
            INPUT_COOKIE => $_COOKIE,
            INPUT_REQUEST => $_REQUEST,
        );
        if (!isset($types[(int)$type])) {
            throw new LogicException('unknown super global var type');
        }
        $var = $types[(int)$type];
        $recursive_static = true;
    } else {
        $var = $type;
    }
    $ret = array();
    foreach ($default as $key => $value) {
        if ($is_int = is_int($value)) {
            if (!($value | (
                FILTER_STRUCT_FORCE_ARRAY |
                FILTER_STRUCT_FULL_TRIM | 
                FILTER_STRUCT_TRIM
            ))) {
                $recursive_static = false;
                throw new LogicException('unknown bitmask');
            }
            if ($value & FILTER_STRUCT_FORCE_ARRAY) {
                $tmp = array();
                if (isset($var[$key])) {
                    foreach ((array)$var[$key] as $k => $v) {
                        if (!preg_match('//u', $k)){
                            continue;
                        }
                        $value &= FILTER_STRUCT_FULL_TRIM | FILTER_STRUCT_TRIM;
                        $tmp += array($k => $value ? $value : '');
                    }
                }
                $value = $tmp;
            }
        }
        if ($isset = isset($var[$key]) and is_array($value)) {
            $ret[$key] = $func($var[$key], $value);
        } elseif (!$isset || is_array($var[$key])) {
            $ret[$key] = null;
        } elseif ($is_int && $value & FILTER_STRUCT_FULL_TRIM) {
            $ret[$key] = preg_replace("/\A{$ftrim}++|{$ftrim}++\z/u", '', $var[$key]);
        } elseif ($is_int && $value & FILTER_STRUCT_TRIM) {
            $ret[$key] = preg_replace("/\A{$trim}++|{$trim}++\z/u", '', $var[$key]);
        } else {
            $ret[$key] = preg_replace('//u', '', $var[$key]);
        }
        if ($ret[$key] === null) {
            $ret[$key] = $is_int ? '' : $value;
        }
    }
    if (!$recursive) {
        $recursive_static = false;
    }
    return $ret;
}
?>

down

Hayley Watson ¶

16 years ago


Dan O'Donnell's suggestion needs a third requirement to work as described:

c) No other variables are defined - especially variables that contain potentially sensitive information.

Without that condition the difference between extract() and assigning variables by hand (and the resulting security implications) should be obvious.

The only valid security step there is (b) - but you should be doing that anyway.

down

owk dot ch199_ph at gadz dot org ¶

18 years ago


And if you want with PHP 5 an easy way to extract $V by reference, try this :
<?php
    foreach ($V as $k => &$v) {
        $$k =& $v;
    }
?>
It can be used to create special kind of "free args" functions that let you choose when you call them the way you send variables, and which ones. They are moreover very fast to call thanks to references :
<?php
    function free_args (&$V) {
        foreach ($V as $k => &$v) {
            $$k =& $v;
        }
        unset ($k);  unset ($v);  unset ($V);

        // be careful that if you need to extract $k, $v or $V variables you should find other names for them in the lines above (ie. $__k, $__v and $__V)
    }

    $huge_text = '...';

    $a = array ('arg1' => 'val1', 'arg2' => &$huge_text); // in this call, only $arg2 will be a true reference in the function
    free_args ($a);
?>
Be warned that you can't write : "<?php free_args (array ('arg1' => 'val1')); ?>" because the array can't be referenced by the function, as it's not yet created when the function starts.

down

benjaminATwebbutvecklarnaDOTse ¶

16 years ago


Re: anon at anon dot org, about extract() and null values

Personally I've found use extracting multiple resultsets from db where the latter would overwrite the previous when a variable is not null ( and optionally if its not >0 )

It would be useful if $extract_type was extended on top of these two:

EXTR_OVERWRITE
EXTR_SKIP

with something like this:

EXTR_OVERWRITE_NULL 
 - If there is a collision, overwrite the existing variable if it is null 

EXTR_OVERWRITE_0
 - Same thing but == 0 or null

EXTR_SKIP_NULL
 - If there is a collision, skip the new variable if the existing is not null

EXTR_SKIP_0
 - Same thing but == 0 or null

Those ought to cover a few good cases that aren't covered now.

down

bob ¶

9 years ago


Note that extract() will only create or overwrite variables in the current scope, so
<?
function test(){
 $a=Array('b'=>1,'c'=>2);
 extract($a);
}
test();
exit("$b");
?>
will produce no output, whereas
<?
function test(){
 global $b;
 $a=Array('b'=>1,'c'=>2);
 extract($a);
}
test();
exit("$b");
?>
will output 1.

down

CertaiN ¶

10 years ago


[New Version]

Example Usage:
<?php
$_GET['A']['a'] = '  CORRECT(including some spaces)    ';
$_GET['A']['b'] = '  CORRECT(including some spaces)    ';
$_GET['A']['c'] = "Invalid UTF-8 sequence: \xe3\xe3\xe3";
$_GET['A']['d']['invalid_structure'] = 'INVALID';

$_GET['B']['a'] = '  CORRECT(including some spaces)    ';
$_GET['B']['b'] = "Invalid UTF-8 sequence: \xe3\xe3\xe3";
$_GET['B']['c']['invalid_structure'] = 'INVALID';
$_GET['B']["Invalid UTF-8 sequence: \xe3\xe3\xe3"] = 'INVALID';

$_GET['C']['a'] = '  CORRECT(including some spaces)    ';
$_GET['C']['b'] = "Invalid UTF-8 sequence: \xe3\xe3\xe3";
$_GET['C']['c']['invalid_structure'] = 'INVALID';
$_GET['C']["Invalid UTF-8 sequence: \xe3\xe3\xe3"] = 'INVALID';

$_GET['unneeded_item'] = 'UNNEEDED';

var_dump(filter_struct_utf8(INPUT_GET, array(
    'A' => array(
        'a' => '',
        'b' => FILTER_STRUCT_TRIM,
        'c' => '',
        'd' => '',
    ),
    'B' => FILTER_STRUCT_FORCE_ARRAY,
    'C' => FILTER_STRUCT_FORCE_ARRAY | FILTER_STRUCT_TRIM,
)));
?>

Example Result:
array(3) {
  ["A"]=>
  array(4) {
    ["a"]=>
    string(36) "  CORRECT(including some spaces)    "
    ["b"]=>
    string(30) "CORRECT(including some spaces)"
    ["c"]=>
    string(0) ""
    ["d"]=>
    string(0) ""
  }
  ["B"]=>
  array(3) {
    ["a"]=>
    string(36) "  CORRECT(including some spaces)    "
    ["b"]=>
    string(0) ""
    ["c"]=>
    string(0) ""
  }
  ["C"]=>
  array(3) {
    ["a"]=>
    string(30) "CORRECT(including some spaces)"
    ["b"]=>
    string(0) ""
    ["c"]=>
    string(0) ""
  }
}

down

nicolas zeh ¶

18 years ago


This function provides exactly the same functionality as extract except that a parameter was added defining the extract target.
This function can be used if your PHP installation does not support the required Flags or more important if you would like to extract arrays to another destination as to $GLOBALS, i.e. other arrays or objects.
The only difference to extract is that extract_to moves the array pointer of $arr to the end as $arr is passed by reference to support the EXTR_REFS flag.

<?php
    if( !defined('EXTR_PREFIX_ALL') ) define('EXTR_PREFIX_ALL', 3);
    if( !defined('EXTR_PREFIX_INVALID') ) define('EXTR_PREFIX_INVALID', 4);
    if( !defined('EXTR_IF_EXISTS') ) define('EXTR_IF_EXISTS', 5);
    if( !defined('EXTR_PREFIX_IF_EXISTS') ) define('EXTR_PREFIX_IF_EXISTS', 6);
    if( !defined('EXTR_REFS') ) define('EXTR_REFS', 256);
    
    
    function extract_to( &$arr, &$to, $type=EXTR_OVERWRITE, $prefix=false ){
        
        if( !is_array( $arr ) ) return trigger_error("extract_to(): First argument should be an array", E_USER_WARNING );
        
        if( is_array( $to ) ) $t=0;
        else if( is_object( $to ) ) $t=1;
        else return trigger_error("extract_to(): Second argument should be an array or object", E_USER_WARNING );
        
        if( $type==EXTR_PREFIX_SAME || $type==EXTR_PREFIX_ALL || $type==EXTR_PREFIX_INVALID || $type==EXTR_PREFIX_IF_EXISTS )
            if( $prefix===false ) return trigger_error("extract_to(): Prefix expected to be specified", E_USER_WARNING ); 
            else $prefix .= '_';
        
        $i=0;
        foreach( $arr as $key=>$val ){
            
            $nkey = $key;
            $isset = $t==1 ? isset( $to[$key] ) : isset( $to->$key );
            
            if( ( $type==EXTR_SKIP && $isset ) 
                || ( $type==EXTR_IF_EXISTS && !$isset ) )
                    continue;
            
            else if( ( $type==EXTR_PREFIX_SAME && $isset )
                || ( $type==EXTR_PREFIX_ALL )
                || ( $type==EXTR_PREFIX_INVALID && !preg_match( '#^[a-zA-Z_\x7f-\xff][a-zA-Z0-9_\x7f-\xff]*$#', $key ) ) )
                    $nkey = $prefix.$key;
                    
            else if( $type==EXTR_PREFIX_IF_EXISTS )
                if( $isset ) $nkey = $prefix.$key;
                else continue;

            if( !preg_match( '#^[a-zA-Z_\x7f-\xff][a-zA-Z0-9_\x7f-\xff]*$#', $nkey ) ) continue;
            
            if( $t==1 )
                if( $type & EXTR_REFS ) $to->$nkey = &$arr[$key];
                else $to->$nkey = $val;
            else 
                if( $type & EXTR_REFS ) $to[$nkey] = &$arr[$key];
                else $to[$nkey] = $val;
            
            $i++;
        }
        
        return $i;
    }
    
    // e.g.:
    extract_to( $myarray, $myobject, EXTR_IF_EXISTS );
?>

down

Csaba at alum dot mit dot edu ¶

18 years ago


Sometimes you may want to extract only a named subset of the key/value pairs in an array.  This keeps things more orderly and could prevent an unrelated variable from getting clobbered from an errant key.  For example,

$things = 'unsaid';
$REQUEST = array(He=>This, said=>1, my=>is, info=>2, had=>a,
                 very=>3, important=>test, things=>4);
$aVarToExtract = array(my, important, info);
extract (array_intersect_key ($REQUEST, array_flip($aVarToExtract)));

will extract
$my = 'is';
$important = 'test';
$info = 2;

but will leave certain
$things = 'unsaid'

Csaba Gabor from Vienna
NB.  Of course the composite request coming in from a web page is in $_REQUEST.

down

Robc ¶

13 years ago


When extracting from a row after a database query using for example:

$row = mysql_fetch_array($result, MYSQL_ASSOC)
extract($row);

I find that the resultant variables may not match the variable type in the database.  In particular I have found integers in the database may gettype() to string on the extracted variable.

down

dotslash.lu at gmail.com ¶

11 years ago


You can't extract a numeric indexed array(e.g. non-assoc array).
<?php
$a = array(
  1,
  2
);
extract($a);
var_dump(${1});
?>

result:
PHP Notice:  Undefined variable: 1 in /Users/Lutashi/t.php on line 7

Notice: Undefined variable: 1 in /Users/Lutashi/t.php on line 7
NULL

down

phatsk+php at gmail dot com ¶

6 years ago


Using extract's return parameter can lead to unintended results, particularly with EXTR_REFS:

<?php

$my_data = [
    'count' => 15,
    'name' => 'foo',
];

$count = extract( $my_data, EXTR_REFS );

echo $my_data['count']; // 2, not 15.

down

Adam Monsen <adamm at wazamatta dot com> ¶

20 years ago


As shown in the example, if your 'prefix' is used, a single underscore is added to the name of the extracted variable. Meaning, a prefix of 'p' becomes a prefix of 'p_', so 'blarg' prefixed would be 'p_blarg'.

If you're not sure what variables you've created through extraction, you can call get_defined_vars() to see all defined variables in the current scope.

down

amolocaleb at gmail dot com ¶

6 years ago


If an object is typecasted into an array and "extracted",only the public properties will be accessible.Methods are of course omitted.
<?php
class Test{
    public $name = '';

    protected $age = 10;

    public $status = 'disabled';

    private $isTrue = false;

    public function __construct()
    {
        $this->name = 'Amolo';
        $this->status = 'active';
    }

    public function getName()
    {
        return $this->name;
    }

    public function getAge()
    {
        return $this->age;
    }

    public function getStatus()
    {
        return $this->status;
    }

}

$obj = (array) new Test();
var_dump($obj);
/* array(4) { ["name"]=> string(5) "Amolo" ["*age"]=> int(10) ["status"]=> string(6) "active" ["TestisTrue"]=> bool(false) } */
extract((array)new Test());
echo  $name; //Amolo
echo  $status; //active
echo $age;//Notice: Undefined variable: age
echo $isTrue;//Notice: Undefined variable: isTrue

down

ktwombley at gmail dot com ¶

18 years ago


It's really easy to open gaping security holes using extract() on $_REQUEST, $_GET, etc. You have to be really sure of what you're doing, and use the proper flags on extract() to avoid clobbering important variables.

For instance, the submission by kake26 at gmail dot com will not only perfectly emulate register globals (that's bad), but it'll store it in a database and recall the same variables every time the script runs (essentially allowing an attacker to attack your script every time it runs via one attack). Oops!

To fix it, you'd have to get creative with flags. Maybe you could use EXTR_PREFIX_ALL instead of EXTR_OVERWRITE, for example. Of course, you should also sanitize the form elements to ensure there's no php code in them, and also to make sure any very important variables aren't in the form data. (like the classic $is_admin = true attack)

down

Anonymous ¶

19 years ago


To make this perfectly clear (hopefully), an underscore is always added when the string is prefixed.
extract(array("color" => "blue"),EXTR_PREFIX_ALL,'');// note: prefix is empty
is the same as
$color='_blue';

down

Dutchdavey ¶

17 years ago


I would draw your attention to the user note at the very end of this page regarding PREFIXES. The user points out that php adds a '_' to your prefixes.

down

anon at anon dot org ¶

19 years ago


A warning about extract() and null values.

This might be an actual Zend2 Engine bug, but it's bad programming practice, so I'm sharing it here instead.

I often work in envrionments where E_STRICT (which would prevent errors like this) isn't on, and I don't have access to change it. I also use a very simple template class that in a nutshell works like this:

$t = new Template('somefile.php');
$t->title = $title;
$t->body = $body;
$t->display();

display() more or less looks like this:

function display(){
    extract(get_object_vars($this),EXTR_REFS);
    ob_start(); include $this->templateFileName;
    return ob_get_clean();
}

If any of the assigned values are null (let's say that in this case $title wasn't initialized above) it causes the engine to do all sorts of incredibly whacky stuff like certifiably lose track of variables in an incredibly inconsistent way. I traced the problem down to the fact that it's using the EXTR_REFS flag. I assume that in PHP's internal variable storage or reference counting mechanism, that trying to extract null references makes it lose track or count of something or rather.

In a nutshell, if you start getting wierd behavior when using extract() make sure that the array or object you are trying to get variables out of doesn't contain null keys or values!

down

darrenforster99 at gmail dot com ¶

3 years ago


In response to Dan O'Donnell's note:

"Presumably one easy way of dealing with this security issue is to use the EXTR_IF_EXISTS flag and make sure"

Not necessarily - even using the EXTR_IF_EXISTS flag could be extremely dangerous - imagine this code running...

<?php

global $sql ;

function runSql ()
{
  $result = $conn->query($sql);
  $conn-> close();
  return $result;
}

function extractGet ()
{
  $name = '' ;
  $address = '' ;
  foreach ( $_GET as $key => $value )
    $_GET[$key] = urldecode ( $value ) ;
  extract($_GET,EXTR_IF_EXISTS);
  $sql = str_replace ( '{NAME}', $name, $sql ) ;
  $sql = str_replace ( '{ADDRESS}', $address, $sql ) ;
}

function outputResult ( $res )
{
  echo '<pre>'.print_r ( $res->fetch_array(MYSQLI_NUM) ).'</pre>' ;
}

$sql = 'SELECT postcode FROM Customers WHERE name={NAME} AND address={ADDRESS}';
extractGet () ;
$res = runSql () ;
outputResult ( $res ) ;
?>

Now can you see a massive security issue here...

seems all well and good if we had a url like 

mycode.php?name=joe%20bloggs&address=20%20Any%20Street

as that would specifically find joe bloggs of 20 any street.

however what if someone typed in

mycode.php?sql=SELECT%20password%20FROM%20Customers

or even worse

mycode.php?sql=DELETE%20from%20Customers

The problem here is that even though as far as you're aware you defined both name and address as the only two empty variables within that function - you may have forgotten about global variables, and these global variables could cause major security issues

In the example above $sql is defined as "SELECT postcode FROM Customers WHERE name={NAME} AND address={ADDRESS}" which seems all well and good, and safe, and then later on str_replace in the extractGet function replaces {NAME} and {ADDRESS} with the name and address variables from $_GET - but if GET contains an SQL variable then that would overwrite the global $sql variable before the str_replace function - and if the str_replace function finds no matches it just returns the original string - in the above two examples the SQL string would be "SELECT password FROM Customers" which in the example outputResult just prints the data retrieved from the database and so in this stage it could print all the customers passwords (hopefully encrypted!) to the screen (oops!) or in the second example the SQL string would be "DELETE from Customers" - with no WHERE clause that would delete all the data from the Customers table and of course a combination of

SELECT table_name FROM information_schema.tables

and

DROP TABLE <table_name>

could be a real disaster!

Of course, this is only a basic example, but it could be quite easy to forget about global variables and these global variables could quite easily be used with extract to cause serious security risks if GET, REQUEST or POST is sent to extract!

down

auto493097 at hushmail dot com ¶

14 years ago


I use XDebug with NetbeansIDE to for analyzing and developing PHP Code. When debugging an extract statement no new variables appeared in the variable's list. Although all variables created by extract could be examined by explicit watch items and single variables appeared as soon as an PHP script makes use of them I am not sure weather it is a wrong configuration, a feature or a bug in XDebug.

down

Aaron Stone ¶

19 years ago


If you are working porting an older application, and taking the advice above, extracting only _SERVER, _SESSING, _COOKIE, _POST, _GET, you have forgotten to extract _FILES. Putting _FILES last and using EXTR_SKIP doesn't work because the name of the file upload box is already set as a variable containing only the temporary name of the uploaded file from one of the earlier extracts (I haven't tested to see which one specifically, however). A workaround is to put _FILES last and use EXTR_OVERWRITE. This allows extract to replace that temp-name-only variable with the full array of file upload information.

down

-2

pg dot perfection at gmail dot com ¶

19 years ago


Here is a little example of how an extraction method should look like when it needs to work recursive (work on nested_arrays too)...

Note that this is only an example, it can be done more easily, and more advanced too.

<?php
/**
 * A nested version of the extract () function.
 *
 * @param    array    $array        The array which to extract the variables from
 * @param    int        $type        The type to use to overwrite (follows the same as extract () on PHP 5.0.3
 * @param    string    $prefix        The prefix to be used for a variable when necessary
 */
function extract_nested (&$array, $type = EXTR_OVERWRITE, $prefix = '')
{
    /**
     *  Is the array really an array?
     */
    if (!is_array ($array))
    {
        return trigger_error ('extract_nested (): First argument should be an array', E_USER_WARNING);
    }

    /**
     *  If the prefix is set, check if the prefix matches an acceptable regex pattern 
     * (the one used for variables)
     */
    if (!empty ($prefix) && !preg_match ('#^[a-zA-Z_\x7f-\xff][a-zA-Z0-9_\x7f-\xff]*$#', $prefix))
    {
        return trigger_error ('extract_nested (): Third argument should start with a letter or an underscore', E_USER_WARNING);
    }

    /**
     * Check if a prefix is necessary. If so and it is empty return an error.
     */
    if (($type == EXTR_PREFIX_SAME || $type == EXTR_PREFIX_ALL || $type == EXTR_PREFIX_IF_EXISTS) && empty ($prefix))
    {
        return trigger_error ('extract_nested (): Prefix expected to be specified', E_USER_WARNING);
    }

    /**
     * Make sure the prefix is oke
     */
    $prefix = $prefix . '_';

    /**
     *  Loop thru the array
     */
    foreach ($array as $key => $val)
    {
        /**
         *  If the key isn't an array extract it as we need to do
         */
        if (!is_array ($array[$key]))
        {
            switch ($type)
            {
                default:
                case EXTR_OVERWRITE:
                    $GLOBALS[$key] = $val;
                break;
                case EXTR_SKIP:
                    $GLOBALS[$key] = isset ($GLOBALS[$key]) ? $GLOBALS[$key] : $val;
                break;
                case EXTR_PREFIX_SAME:
                    if (isset ($GLOBALS[$key]))
                    {
                        $GLOBALS[$prefix . $key] = $val;
                    }
                    else
                    {
                        $GLOBALS[$key] = $val;
                    }
                break;
                case EXTR_PREFIX_ALL:
                    $GLOBALS[$prefix . $key] = $val;
                break;
                case EXTR_PREFIX_INVALID:
                    if (!preg_match ('#^[a-zA-Z_\x7f-\xff]$#', $key{0}))
                    {
                        $GLOBALS[$prefix . $key] = $val;
                    }
                    else
                    {
                        $GLOBALS[$key] = $val;
                    }
                break;
                case EXTR_IF_EXISTS:
                    if (isset ($GLOBALS[$key]))
                    {
                        $GLOBALS[$key] = $val;
                    }
                break;
                case EXTR_PREFIX_IF_EXISTS:
                    if (isset ($GLOBALS[$key]))
                    {
                        $GLOBALS[$prefix . $key] = $val;
                    }
                break;
                case EXTR_REFS:
                    $GLOBALS[$key] =& $array[$key];
                break;
            }
        }
        /**
         *  The key is an array... use the function on that index
         */
        else
        {
            extract_nested ($array[$key], $type, $prefix);
        }
    }
}
?>

down

-4

danbettles at yahoo dot co dot uk ¶

15 years ago


When using EXTR_PREFIX_ALL - and probably all the other EXTR_PREFIX_* constants - and a numerically-indexed array, extract() will add an underscore ("_") between the prefix and the index.

<?php

extract(array('foo', 'bar'), EXTR_PREFIX_ALL, 'var');

print_r(get_defined_vars());  // Reveals $var_0 = 'foo' and $var_1 = 'bar'
?>

down

-6

moslehi<atsign>gmail<d0t>c0m ¶

18 years ago


Experimentally I found that calling extract() also shows the number of keys if the key is set and is not numeric ! Maybe there was a better definition than mine  . Please have a look to this scripts :

<?PHP 
$var["i"] = "a";
$var["j"] = "b";
$var["k"] = 1;
echo extract($var); // returns 3
?>

<?PHP 
$var2["i"] = "a";
$var2[2] = "b";
$var2[] = 1;
echo extract($var2); // returns 1
?>

(Arash Moslehi)

down

-6

benjaminATwebbutvecklarnaDOTse ¶

16 years ago


In the meantime, I'm using this:

// extract alternative
# extracts variables where new value is above the threshold or if old value is on or below the threshold (or var is not defined)
# an associative array is obviously the sane thing to pass
#
# I am absolutely certain someone will find obvious problems or errors with this 
# I haven't even tried to compare other values than 0 so if you need to do that and surely finds obvious flaws, 
# please mail me, I'd really like to know. 
# benjaminATwebbutvecklarnaDOTse

// usage example:
# thrextract(mysql_fetch_assoc(mysql_query("SELECT preset_this,preset_that FROM site_preset WHERE ID = $site_id")));
# thrextract(mysql_fetch_assoc(mysql_query("SELECT preset_this,preset_that FROM category_preset WHERE ID = $category_id"))); 

function thrextract($arr,$thr = 0){
    foreach($arr as $key => $var){
        global $$key;
        if($var > $thr or $$key <= $thr) $$key = $var;
    }
}

down

-15

kake26 at gmail dot com ¶

19 years ago


The following is a neat use for extract to store and manipulate large amounts of form data from. I basically loop through the $_POST and implode it seperating the key and value pairs by a space. Then store it in a db, the reversing function basically explodes the string to a array. Then converts the indexed array to a associative array then uses extract to seal the deal and make it easily available within a program. My main reason for sharing these are the fact I make some big web applications that store allot of forum data in a DB and these functions make it very easy to quickly and easily store and recall the data. I've contributed it because I spent many hours creating this code and recall going "I wish someone had previously submitted it to the page notes". Would have saved me allot of time and agony and I'm sure I'm not the only person that could really benefit from it, so I decided to share.

<?php
$stack = array();
foreach ($_POST as $key => $value) {
array_push($stack, $key, $value);
}
// store it
$block = implode(" ",$stack); // yeilds a space delimited string
// insert query to store string in DB here, like the one below
$query = "INSERT INTO `sometable` VALUES('".$seluser."','".addslashes($block)."');";
$result = mysql_query($query) or die("Query failed for block insert: " . mysql_error());
// note $seluser in my case is a user ID associated with that block
// in one of my web apps
?>

The nice thing is with the above we can quickly create a string of key and value pairs from the data the script got. Without really caring what their names are. You know how if register globals are on you say $someformvar rather than $_POST["someformvar"]; , basically the code below reads this previous created block returns it to that state. Sort of like presistant register globals.

<?php
// insert query to grab the previously stored string here
$query = "SELECT * FROM `sometable` WHERE `blockid` = '".addslashes($bid)."';";
$result = mysql_query($query) or die("Query failed read: " . mysql_error());
$sql = mysql_fetch_array($result, MYSQL_ASSOC);
$array = eplode(" ",$sql["data"]); 
for ($i = 0; $i < sizeof($array); $i+=2) { 
$myassoc[$array[$i]] = isset($array[$i+1])?$array[$i+1]:NULL; 
}
extract($myassoc, EXTR_OVERWRITE);
// now you're key and value pairs from $_POST have been restored
// instead of $_POST
?>

down

-23

Rodrigo ¶

14 years ago


Here's a way to use extract in $_FILES arrays without using register_gloabals on.

I started to use extract a few weeks ago, and my codes hasn't been so clean since then. The use of the arrays $_POST and $_GET is ok, but one missed doublequote causes a lot of trouble. 

Besides I teach PHP in a school, and this function has made my examples easier.

<?php
if(isset($_FILES["file"])){
    extract($_FILES);
    extract($file);
    echo $name."<br>";
    echo $tmp_name."<br>";
    echo $size."<br>";
}
?>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<title>Documento sin t&iacute;tulo</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>

<body>
<form action="" method="post" enctype="multipart/form-data" name="form1">
  <p>
    <input type="file" name="file">
</p>
  <p>
    <input type="submit" name="Submit" value="Enviar">
</p>
</form>
</body>
</html>

Hope this can help anyone.

add a note