more general version, works fine on negative, very big ($value > 1E+18) and very small ($value < 1E-18) numbers.
function expn($value, $prec = 3, $base = 1000, $prefix = '') {
$e = array('a', 'f', 'p', 'n', 'u', 'm', '', 'k', 'M', 'G', 'T', 'P', 'E');
$p = min(max(floor(log(abs($value), $base)), -6), 6);
return round((float)$value / pow($base, $p), $prec) . $prefx . $e[$p + 6];
}
log
(PHP 4, PHP 5, PHP 7, PHP 8)
log — 自然対数
説明
オプションの base パラメータを指定した場合は
log() は logbase
num を返します。それ以外の場合は
log() は num
の自然対数を返します。
パラメータ
-
num -
対数を計算する値。
-
base -
オプションで指定する、底 (デフォルトは 'e' で、これは自然対数となります)。
戻り値
base を指定した場合はそれを底とする
num の対数、指定しない場合は自然対数を返します。
add a note
User Contributed Notes 8 notes
c0x at mail dot ru ¶
20 years ago
olafurw [at] gmail.com ¶
16 years ago
For those interested. Works with older than 4.3 versions.
<?php
function byteConvert($bytes)
{
$s = array('B', 'Kb', 'MB', 'GB', 'TB', 'PB');
$e = floor(log($bytes)/log(1024));
return sprintf('%.2f '.$s[$e], ($bytes/pow(1024, floor($e))));
}
?>
ClaudiuS ¶
11 years ago
If you just need to check if N is a perfect power of Base, log() is SLOW compared to a WHILE construct that will be 2x faster!
Tested on range: 1 ... 20.000.000 => while() is 2.105 times faster
<?php
$number='fill in your number here'
$base='fill in requested base here';
//use when the power is needed
$pow=0;do { $number/=$base;$pow++; } while ($number>1);
if ($number==1) print $base.'^'.$pow;
else print 'False';
//use when just a check is needed
do $number/=$base; while ($number>1);
if ($number==1) print 'True';
else print 'False';
?>
mcmeijer at yahoo dot com ¶
19 years ago
$val = 1000000
$val2 = floor(log($val,10)) gives a value of 5 for $val2 and not 6 as expected.
$val2 = floor(log10($val)) gives the correct value.
rhinopete at batpudding dot com ¶
6 years ago
Seems like unit prefixes should have a standard PHP function. Maybe in the future.
I found this page while looking for a quick unit prefix function. The one by olafurw was voted down, I think because it had unchecked array indexes and /0s. So here it is fixed and readable.
-Should work down to PHP 4.
-Not meant for fractions or negatives, so anything less than 1 returns 0.
-Not very effective on really really large numbers, but it's easy to add more prefixes.
-Doesn't handle non numeric arguments. PHP 7+ can do this: function binaryprefix( int $units, $unit = '' )
// returns reduced $units with a binary prefix
// ex. ( 110974120, 'B' ) == 105.8MiB
// ex. ( 2^100, 'B' ) == 1048576.0YiB
// ex. ( 0.12314, 'B' ) == 0B
function binaryprefix( $units, $unit = '' )
{
$prefix = array('', 'Ki', 'Mi', 'Gi', 'Ti', 'Pi', 'Ei', 'Zi', 'Yi');
$exponent = min( floor( log( max( 1, $units ), 1024 ) ), count( $prefix ) - 1 );
if ( $units < 1024 )
return sprintf( '%d%s%s', max( 1, $units + 1 ) - 1, $prefix[$exponent], $unit );
else
return sprintf( '%.1f%s%s', $units / pow(1024, $exponent), $prefix[$exponent], $unit );
}
https://en.wikipedia.org/wiki/Binary_prefix#Adoption_by_IEC.2C_NIST_and_ISO
Also more colloquially:
$prefix = array('', 'k', 'm', 'g', 't', 'p', 'e', 'z', 'y');
admin at worldtakeover dot tk ¶
20 years ago
In regards to the note about log in base 10 and the round() function. You need to use floor() instead of round() to find out the order of magnitude. That way, you don't have to worry about subtracting 0.5 or whatever.
dingus_76 at hotmail dot com ¶
16 years ago
well i been pulling my hair out trying to get log to work with big numbers and i ended up writing a bclog function so to save everyone else the stress here it is
<?php
function bclog($X,$base=10,$decimalplace=12){
$integer_value=0;
while($X < 1){
$integer_value = $integer_value - 1 ;
$X = bcmul($X , base);
}
while($X >= $base){
$integer_value = $integer_value + 1;
$X = bcdiv($X , $base );
}
$decimal_fraction = 0.0;
$partial = 1.0;
# Replace X with X to the 10th power
$X = bcpow($X , 10);
while($decimalplace > 0){
$partial = bcdiv($partial , 10);
$digit=0;
while($X >= $base){
$digit = $digit + 1;
$X = bcdiv($X , $base);
}
$decimal_fraction = bcadd($decimal_fraction , bcmul($digit , $partial));
# Replace X with X to the 10th power
$X = bcpow($X , 10);
$decimalplace = $decimalplace - 1 ;
}
return $integer_value + $decimal_fraction ;
}
?>
Ulf Wostner ¶
18 years ago
<?php
#--------------------------------------------------------
# How many digits does an integer have?
#--------------------------------------------------------
function digit_count($n, $base=10) {
if($n == 0) return 1;
if($base == 10) {
# using the built-in log10(x)
# might be more accurate than log(x)/log(10).
return 1 + floor(log10(abs($n)));
}else{
# here logB(x) = log(x)/log(B) will have to do.
return 1 + floor(log(abs($n))/ log($base));
}
}
# Example: How many decimal digits for 2 to the power 24?
echo digit_count(pow(2, 24));
# Example: How many bits to write 1 billion in binary, last century?
if($country_code == 'US') echo digit_count(pow(10, 9), 2);
if($country_code == 'UK') echo digit_count(pow(10, 12), 2);
#--------------------------------------------------------
# Using log to format columns.
#--------------------------------------------------------
# Suppose we have a dynamically generated list of integers,
# and want to present them as a table. The use of log10 in
# our digit_count helps calculate the proper format string.
function print_list_of_ints($ints, $line_width=40) {
# Apply our digit_count to the max int among ints.
$field_width = 2 + digit_count(max($ints));
# Create format string for printf.
$format = "%${field_width}d";
$ints_per_line = floor($line_width/$field_width);
$border = str_repeat("-", $ints_per_line * $field_width);
echo "\n$border\n";
foreach($ints as $count => $int) {
if( $count and ($count % $ints_per_line == 0)) echo "\n";
printf($format, $int);
}
echo "\n$border\n";
}
# To generate an example, here is a basic function
# returning a list of (pseudo) random numbers.
function rands($how_many) {
for($i=0; $i < $how_many; $i++) $rands[] = rand();
return $rands;
}
# Example: A list of random ints dynamically formatted into columns.
print_list_of_ints(rands(11));
/* Sample output. Numbers and fonts vary. Visualize monospace!
------------------------------------
1093146637 244503173 1346204527
638304372 140216732 1054707210
573915416 1728677954 2038899669
534854768 12674586
------------------------------------
*/
?>
