To create a range array like
Array
(
[11] => 1
[12] => 2
[13] => 3
[14] => 4
)
combine two range arrays using array_combine:
array_combine(range(11,14),range(1,4))
range
(PHP 4, PHP 5, PHP 7, PHP 8)
range — ある範囲の要素を含む配列を作成する
説明
ある範囲の要素を含む配列を作成します。
start と end
が両方文字列で、かつ step が整数の場合、
生成される配列はバイト列のシーケンスになります。
そうでない場合、生成される配列は数値のシーケンスになります。
start が end
よりも小さい場合、シーケンスは増加します。
そうでない場合、シーケンスは減少します。
パラメータ
-
start -
シーケンスの最初の値。
-
end -
シーケンスの最後としてあり得る値。
-
step -
stepは、生成されるシーケンスの個別の値が どれくらい離れているかを指定します。シーケンスが減少する場合、
stepは負の値を指定しても構いません。stepが 端数のない float の場合、整数として解釈されます。
戻り値
要素のシーケンスを配列として返します。
最初の要素は start になり、
end になるまで続きます。
シーケンスのそれぞれの値は、step だけ離れています。
返される配列の最後の要素は、
end または シーケンスの直前の要素になります。
どちらになるかは、step の値によります。
start と end
が両方文字列で、かつ step が整数の場合、
生成される配列は、バイト列のシーケンスになります。
一般的にはラテン文字の ASCII 文字からなるシーケンスです。
start, end, step のうち少なくともひとつが float の場合、
生成される配列は float のシーケンスになります。
その他の場合、生成される配列は整数のシーケンスになります。
エラー / 例外
-
stepが0の場合、ValueError がスローされます。 -
start,end,stepが有限の値(is_finite()) でない場合、 ValueError がスローされます。 -
stepが負の値なのに、生成される範囲が増えている(つまり、$start <= $end) 場合、 ValueError がスローされます。 -
startまたはendが空文字列''の場合、E_WARNINGが発生し、空文字列は0として解釈されます。 -
startまたはendが 数値形式の文字列 でない、長さが1バイトより大きい値の場合、E_WARNINGが発生します。 -
startまたはendが 暗黙のうちに整数にキャストされた文字列の場合、E_WARNINGが発生します。なぜなら、他の境界の入力値は数値だからです。 -
stepが float の場合、 かつstartとendが 数値形式の文字列 でない場合、E_WARNINGが発生します。
変更履歴
| バージョン | 説明 |
|---|---|
| 8.3.0 |
start と end
が両方文字列の場合、range() は常にバイト列を要素とした配列を生成するようになりました。
これより前のバージョンでは、境界の値のうちのひとつが数値形式の文字列の場合に、もう一方の境界の値を整数にキャストしていました。
|
| 8.3.0 |
start または end が
暗黙のうちに整数にキャストされた文字列の場合、
E_WARNING が発生するようになりました。
なぜなら、他の境界の入力値が数値だからです。
|
| 8.3.0 |
start または end
が数値形式の文字列でなく、かつ長さが1バイトより大きい値の場合、
E_WARNING が発生するようになりました。
|
| 8.3.0 |
start または end が空文字列の場合、E_WARNING が発生するようになりました。
|
| 8.3.0 |
step が 端数のない float
の場合、整数として解釈されるようになりました。
|
| 8.3.0 |
step が負の値なのに、生成される範囲が増えている場合、
ValueError がスローされるようになりました。
|
| 8.3.0 |
step が有限の値でない場合、
ValueError がスローされるようになりました。
|
| 8.3.0 |
start または end
が配列、object、resource の場合、
TypeError がスローされるようになりました。
これより前のバージョンでは、これらの値は暗黙のうちに整数にキャストされていました。
|
例
例1 range() の例
<?php
echo implode(', ', range(0, 12)), PHP_EOL;
echo implode(', ', range(0, 100, 10)), PHP_EOL;
echo implode(', ', range('a', 'i')), PHP_EOL;
echo implode(', ', range('c', 'a')), PHP_EOL;
echo implode(', ', range('A', 'z')), PHP_EOL;
?>上の例の出力は以下となります。
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 a, b, c, d, e, f, g, h, i c, b, a A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z, [, \, ], ^, _, `, a, b, c, d, e, f, g, h, i, j, k, l, m, n, o, p, q, r, s, t, u, v, w, x, y, z
add a note
User Contributed Notes 30 notes
Palz ¶
12 years ago
php at keith tyler dot com ¶
10 years ago
So with the introduction of single-character ranges to the range() function, the internal function tries to be "smart", and (I am inferring from behavior here) apparently checks the type of the incoming values. If one is numeric, including numeric string, then the other is treated as numeric; if it is a non-numeric string, it is treated as zero.
But.
If you pass in a numeric string in such a way that is is forced to be recognized as type string and not type numeric, range() will function quite differently.
Compare:
<?php
echo implode("",range(9,"Q"));
// prints 9876543210
echo implode("",range("9 ","Q")); //space after the 9
// prints 9:;<=>?@ABCDEFGHIJKLMNOPQ
echo implode("",range("q","9 "));
// prints qponmlkjihgfedcba`_^]\[ZYXWVUTSRQPONMLKJIHGFEDCBA@?>=<;:987654
?>
I wouldn't call this a bug, because IMO it is even more useful than the stock usage of the function.
ccb_bc at hotmail dot com ¶
5 years ago
<?php
function natural_prime_numbers(array $range, bool $print_info = false) : array {
$start_time = time();
$primes_numbers = array();
$print = '';
$count_range = count($range);
foreach($range as $number){
$values_division_number = array();
if($number === 0 || $number === 1 || !is_int($number)){ // eliminate 0, 1 and other no integer
continue;
}
if($number != 2 && $number%2 === 0){ // eliminate 2 and pairs numbers
continue;
}
for($i = 1; $i <= $number; $i++){
$resultado_divisao = $number / $i;
$values_division_number[$i] = $resultado_divisao;
if($count_range <= 20){ // $count_range <= 20 (+ performance)
$print .= PHP_EOL;
$info = 'The number '.$number.' divided by the number '.$i.' is equal to: '.($number / $i);
$print .= $info;
if($i === $number){
$print .= PHP_EOL;
}
}
array_walk($values_division_number, function($value, $index) use (&$values_division_number, &$number){ // reference change values
// eliminate floats and others numbers not are equal 1 and own number
if(is_float($value) && $value != $number && $value > 1){
unset($values_division_number[$index]);
}
});
$values_division_number = array_values($values_division_number); // reindex array
// here we want only array with 2 indexes with the values 1 and own number (rule to a natural prime number)
if(count($values_division_number) === 2 && $values_division_number[0] === $number && $values_division_number[1] === 1){
$primes_numbers[$number] = $number;
}
}
}
return array(
'length_prime_numbers' => count($primes_numbers),
'prime_numbers' => array_values($primes_numbers),
'print' => $print,
'total_time_processing' => (time() - $start_time).' seconds.',
);
}
var_dump(natural_prime_numbers(range(0, 11))); // here the range() function ;-)
// Result:
// array (size=3)
// 'length_prime_numbers' => int 5
// 'prime_numbers' =>
// array (size=5)
// 0 => int 2
// 1 => int 3
// 2 => int 5
// 3 => int 7
// 4 => int 11
// 'print' => string '
// O número 2 dividido pelo número 1 é igual a: 2
// O número 2 dividido pelo número 2 é igual a: 1
// O número 3 dividido pelo número 1 é igual a: 3
// O número 3 dividido pelo número 2 é igual a: 1.5
// O número 3 dividido pelo número 3 é igual a: 1
// O número 5 dividido pelo número 1 é igual a: 5
// O número 5 dividido pelo número 2 é igual a: 2.5
// O número 5 dividido pelo número 3 é igual a: 1.6666666666667
// O número 5 dividido pelo número 4 é igual a: 1.25
// O número 5 dividido pelo '...
// **************************** //
//
// * Remember that the function is recursive, that is: a range of 5000 takes more than 1 minute on a processor Intel® Core™ i5-8250U (3.40 GHz).
//
// **************************** //
?>
gtisza at gmail dot com ¶
11 years ago
You might expect range($n, $n-1) to be an empty array (as in e.g. Python) but actually PHP will assume a step of -1 if start is larger than end.
Alien426 ¶
9 years ago
The function will generate an array of integers even if your numerical parameters are enclosed in quotes.
<?php
var_dump( range('1', '2') ); // outputs array(2) { [0]=> int(1) [1]=> int(2) }
?>
An easy way to get an array of strings is to map strval() to the range:
<?php
var_dump( array_map('strval', range('1', '2')) ); // outputs array(2) { [0]=> string(1) "1" [1]=> string(1) "2" }
?>
luca.favorido ATgmailDOT com ¶
8 years ago
The function "range" is very useful to get an array of characters as range('C','R') does.
At work, I had to extend the function range($a,$b) to work in this special case: with two uppercase strings $a and $b, it should return all the possible strings between $a and $b.
This could be used for example to get the excel column indexes.
e.g. <?php range('A','AD') ==> array('A','B','C',...,'Z','AA','AB','AC','AD') ?>
So I wrote the function getrange($min,$max) that exactly does this.
<?php
function getcolumnrange($min,$max){
$pointer=strtoupper($min);
$output=array();
while(positionalcomparison($pointer,strtoupper($max))<=0){
array_push($output,$pointer);
$pointer++;
}
return $output;
}
function positionalcomparison($a,$b){
$a1=stringtointvalue($a); $b1=stringtointvalue($b);
if($a1>$b1)return 1;
else if($a1<$b1)return -1;
else return 0;
}
/*
* e.g. A=1 - B=2 - Z=26 - AA=27 - CZ=104 - DA=105 - ZZ=702 - AAA=703
*/
function stringtointvalue($str){
$amount=0;
$strarra=array_reverse(str_split($str));
for($i=0;$i<strlen($str);$i++){
$amount+=(ord($strarra[$i])-64)*pow(26,$i);
}
return $amount;
}
?>
ThinkMedical at Gmail dot com ¶
16 years ago
foreach(range()) whilst efficiant in other languages, such as python, it is not (compared to a for) in php*.
php is a C-inspired language and thus for is entirely in-keeping with the lanuage aethetic to use it
<?php
//efficiant
for($i = $start; $i < $end; $i+=$step)
{
//do something with array
}
//inefficiant
foreach(range($start, $end, $step) as $i)
{
//do something with array
}
?>
That the officiant documentation doesnt mention the for loop is strange.
Note however, that in PHP5 foreach is faster than for when iterating without incrementing a variable.
* My tests using microtime and 100 000 iterations consistently (~10 times) show that for is 4x faster than foreach(range()).
jazzduck AT gmail DOT com ¶
10 years ago
Despite the line above that says that the $step value should be "given as a positive number," the range() function will in fact correctly handle reversed (decrementing) ranges. For example:
<?php print_r( range( 24, 20 ) ); ?>
Array
(
[0] => 24
[1] => 23
[2] => 22
[3] => 21
[4] => 20
)
<?php print_r( range( 20, 11, -3 ) ); ?>
Array
(
[0] => 20
[1] => 17
[2] => 14
[3] => 11
)
It will actually ignore the sign of the $step argument, and determine whether to increment or decrement based purely on whether $start > $end or $end > $start. For example:
<?php print_r( range( 20, 11, 3 ) ); ?>
Array
(
[0] => 20
[1] => 17
[2] => 14
[3] => 11
)
<?php print_r( range( 11, 20, -3 ) ); ?>
Array
(
[0] => 11
[1] => 14
[2] => 17
[3] => 20
)
ktamas77 at gmail dot com ¶
12 years ago
if you need zero padding, string prefixes or any other masks, then a simple combination of array_map, inline functions and sprintf is your friend.
<?php
$a = array_map(function($n) { return sprintf('sample_%03d', $n); }, range(50, 59) );
print_r($a);
?>
Will result:
Array
(
[0] => sample_050
[1] => sample_051
[2] => sample_052
[3] => sample_053
[4] => sample_054
[5] => sample_055
[6] => sample_056
[7] => sample_057
[8] => sample_058
[9] => sample_059
)
chris at laflash dot org ¶
17 years ago
Quick HTML menus with minimum and maximum sets of years:
<?php
/*
** Quick HTML menus with minimum and maximum sets of years.
** @author Chris Charlton <chris@laflash.org>
** @license FREE!
*/
// Years range setup
$year_built_min = 1900;
$year_built_max = date("Y");
?>
<select id="yearBuiltMin" size="1">
<?php // Generate minimum years
foreach (range($year_built_min, $year_built_max) as $year) { ?>
<option value="<?php echo($year); ?>"><?php echo($year); ?></option>
<?php } ?>
</select>
<select id="yearBuiltMax" size="1">
<?php // Generate max years
foreach (range($year_built_max, $year_built_min) as $year) { ?>
<option value="<?php echo($year); ?>"><?php echo($year); ?></option>
<?php } ?>
</select>
m0sh3 at hotmail dot com ¶
17 years ago
Here's how i use it to check if array is associative or not:
<?php
if (array_keys($arr)===range(0, sizeof($arr)-1)) {
// not associative array
} else {
// associative array
}
?>
Ray.Paseur often uses Gmail ¶
11 years ago
Interestingly, these two statements produce identical 26-character alphabet arrays.
<?php
$arr = range('A', 'Z');
$arr = range('AA', 'ZZ');
dries at volta dot be ¶
12 years ago
Ever wanted to generate an array with a range of column names for use in Excel file related parsing?
I've wrote a function that starts at the A column and adds column names up until the column you specified.
<?php
/**
* This function creates an array with column names up until the column
* you specified.
*/
function createColumnsArray($end_column, $first_letters = '')
{
$columns = array();
$length = strlen($end_column);
$letters = range('A', 'Z');
// Iterate over 26 letters.
foreach ($letters as $letter) {
// Paste the $first_letters before the next.
$column = $first_letters . $letter;
// Add the column to the final array.
$columns[] = $column;
// If it was the end column that was added, return the columns.
if ($column == $end_column)
return $columns;
}
// Add the column children.
foreach ($columns as $column) {
// Don't itterate if the $end_column was already set in a previous itteration.
// Stop iterating if you've reached the maximum character length.
if (!in_array($end_column, $columns) && strlen($column) < $length) {
$new_columns = createColumnsArray($end_column, $column);
// Merge the new columns which were created with the final columns array.
$columns = array_merge($columns, $new_columns);
}
}
return $columns;
}
?>
Usage:
<?php
// Return an array with all column names from A until and with BI.
createColumnsArray('BI');
?>
me at phpscott dot com ¶
12 years ago
So, I needed a quick and dirty way to create a dropdown select for hours, minutes and seconds using 2 digit formatting, and to create those arrays of data, I combined range with array merge..
<?php
$prepend = array('00','01','02','03','04','05','06','07','08','09');
$hours = array_merge($prepend,range(10, 23));
$minutes = array_merge($prepend,range(10, 59));
$seconds = $minutes;
?>
Super simple.
captvanhalen at gmail dot com ¶
16 years ago
Here is a home rolled range() function that uses the step feature for those unfortunate souls who cannot use PHP5:
<?php
function my_range( $start, $end, $step = 1) {
$range = array();
foreach (range( $start, $end ) as $index) {
if (! (($index - $start) % $step) ) {
$range[] = $index;
}
}
return $range;
}
?>
moficer at host dot sk ¶
8 years ago
php 5.6.16
<?php
var_export(range('Z', 'a'));
/*
array (
0 => 'Z',
1 => '[',
2 => '\\',
3 => ']',
4 => '^',
5 => '_',
6 => '`',
7 => 'a',
)
*/
jay at NOspam dot myd3 dot com ¶
15 years ago
This is a modified version of thomas' range_string() function. It's simpler, cleaner, and more robust, but it lacks the advanced features his function had, hopefully it will be of assitance to someone.
Examples:
input: "1, 2, 3, 4, 5, 6" --> output: 1, 2, 3, 4, 5, 6
input: "1-6" --> output: 1, 2, 3, 4, 5, 6
input: "1-6" --> output: 1, 2, 3, 4, 5, 6
input: "1 - -6" --> output: 1, 2, 3, 4, 5, 6
input: "0 - 0" --> output: 0
input: "1, 4-6, 2" --> output: 1, 2, 4, 5, 6
input: "6,3-1" --> output: 1, 2, 3, 6
<?php
define('RANGE_ARRAY_SORT', 1);
define('RANGE_ARRAY', 2);
define('RANGE_STRING_SORT', 3);
define('RANGE_STRING', 4);
function range_string($range_str, $output_type = RANGE_ARRAY_SORT)
{
// Remove spaces and nother non-essential characters
$find[] = "/[^\d,\-]/";
$replace[] = "";
// Remove duplicate hyphens
$find[] = "/\-+/";
$replace[] = "-";
// Remove duplicate commas
$find[] = "/\,+/";
$replace[] = ",";
$range_str = preg_replace($find, $replace, $range_str);
// Remove any commas or hypens from the end of the string
$range_str = trim($range_str,",-");
$range_out = array();
$ranges = explode(",", $range_str);
foreach($ranges as $range)
{
if(is_numeric($range) || strlen($range) == 1)
{
// Just a number; add it to the list.
$range_out[] = (int) $range;
}
else if(is_string($range))
{
// Is probably a range of values.
$range_exp = preg_split("/(\D)/",$range,-1,PREG_SPLIT_DELIM_CAPTURE);
$start = $range_exp[0];
$end = $range_exp[2];
if($start > $end)
{
for($i = $start; $i >= $end; $i -= 1)
{
$range_out[] = (int) $i;
}
}
else
{
for($i = $start; $i <= $end; $i += 1)
{
$range_out[] = (int) $i;
}
}
}
}
switch ($output_type) {
case RANGE_ARRAY_SORT:
$range_out = array_unique($range_out);
sort($range_out);
case RANGE_ARRAY:
return $range_out;
break;
case RANGE_STRING_SORT:
$range_out = array_unique($range_out);
sort($range_out);
case RANGE_STRING:
default:
return implode(", ", $range_out);
break;
}
}
// Sample Usage:
$range = range_string("6, 3-1");
?>
qz ¶
8 years ago
If you're looking to fill an array to get a hash with 0-9 numerical values, using
range(0,9);
is a faster solution compared to
array_fill(0, 10, '');
krdr dot mft at gmail dot com ¶
11 years ago
I've been introduced with range() function not so long ago, and I found that examples about it is somewhat wrong, even inefficient:
<?php
$o = "";
$time_start = microtime(true);
foreach(range(1, 10000) as $val) {
$o .= $val;
}
$time_end = microtime(true);
$time = $time_end - $time_start;
echo 'rangein: '.$time.'<br />';
$o = "";
$time_start = microtime(true);
$a = range(1, 10000);
foreach($a as $val) {
$o .= $val;
}
$time_end = microtime(true);
$time = $time_end - $time_start;
echo 'rangeout: '.$time.'<br />';
?>
Which gives results:
rangein: 0.0025348663330078
rangeout: 0.0019199848175049
In some cases difference is even bigger and proportional to the range generated. I suppose that results of range() are cached/hashed.
Note: execution order does affects execution times, but difference still exists
manuel at levante dot de ¶
17 years ago
<?php
function srange ($s) {
preg_match_all("/([0-9]{1,2})-?([0-9]{0,2}) ?,?;?/", $s, $a);
$n = array ();
foreach ($a[1] as $k => $v) {
$n = array_merge ($n, range ($v, (empty($a[2][$k])?$v:$a[2][$k])));
}
return ($n);
}
$s = '1-4 6-7 9-10';
print_r(srange($s));
?>
Return:
Array
(
[0] => 1
[1] => 2
[2] => 3
[3] => 4
[4] => 6
[5] => 7
[6] => 9
[7] => 10
)
VivienG ¶
1 year ago
They forgot to say something.
If the ending value not encounter the last sequence, the function return false.
In other words :
Given a int $n, if ( $start + $n * $step ) < $end and ( $start + ( $n + 1 ) * $step ) > $end, the function doen't give the maximum possible range, it returns a boolean.
So the last range number HAVE TO BE the end number.
mohammed dot hussein dot mahmoud at gmail dot com ¶
2 years ago
You could use negative numbers in place of the `step` parameter. You need to make sure that the `start` is bigger than `end`. Note that range() function in php generates the range inclusive, i.e. it also includes the `end` parameter and not just up to it but not including it like most other languages.
The following snippet of code should explain what I mean about negative steps:
<?php
// 100, 90, 80, 70, 60, 50, 40, 30, 20, 10, 0
print_r(range(100, 0, -10));
?>
What happens basically is that the range function does not really care about what is bigger or smaller, it just adds the step to the start and appends that to the a temp result variable as long as it did not reach the end param value. In this case, adding negative numbers is like minus (computers do that for 2's complement under the hood.) This will cause the number to go from 100 to 90 and then the function will check if 90 reached 0 yet. Since it wouldn't have done that, it will keep adding -step (-10 in that case) to the latest result (i.e. 90) and so on and so forth.
Since range() is said to be better and faster than array_fill() I believe it was important for me to try it out and actually post this note on the official documentation just to make sure people can use this.
lsblsb at gmx dot de ¶
10 years ago
I needed a function, that creates a letter range with arbitrary length.
You specify via the $length parameter, how many entries you need.
Logic is analog to the logic of the column-titles in a calc-sheet.
<?php
/**
* create a letter range with arbitrary length
* @param int $length
* @return array
*/
function createLetterRange($length)
{
$range = array();
$letters = range('A', 'Z');
for($i=0; $i<$length; $i++)
{
$position = $i*26;
foreach($letters as $ii => $letter)
{
$position++;
if($position <= $length)
$range[] = ($position > 26 ? $range[$i-1] : '').$letter;
}
}
return $range;
}
?>
pyetrosafe at gmail dot com ¶
11 years ago
To create a simple array or a multidimensional array with defined size and null values, use this expression:
<?php
$SimpleArray = array_map(function($n) { return null; }, range(1, 3) );
$MultiArray = array_map(function($n) { return array_map(function($n) { return null; }, range(1, 2) ); }, range(1, 3) );
var_dump($SimpleArray);
var_dump($MultiArray);
// And will print:
?>
>>$SimpleArray
array(3) {
[0]=> NULL
[1]=> NULL
[2]=> NULL
}
>>$MultiArray
array(3) {
[0]=> array(2) {
[0]=> NULL
[1]=> NULL
}
[1]=> array(2) {
[0]=> NULL
[1]=> NULL
}
[2]=> array(2) {
[0]=> NULL
[1]=> NULL
}
}
?>
derek at php dot net ¶
19 years ago
This should emulate range() a little better.
<?php
function range_wroar($low, $high, $step = 1) {
$arr = array();
$step = (abs($step)>0)?abs($step):1;
$sign = ($low<=$high)?1:-1;
if(is_numeric($low) && is_numeric($high)) {
//numeric sequence
for ($i = (float)$low; $i*$sign <= $high*$sign; $i += $step*$sign)
$arr[] = $i;
} else {
//character sequence
if (is_numeric($low))
return $this->range($low, 0, $step);
if (is_numeric($high))
return $this->range(0, $high, $step);
$low = ord($low);
$high = ord($high);
for ($i = $low; $i*$sign <= $high*$sign; $i += $step*$sign) {
$arr[] = chr($i);
}
}
return $arr;
}
?>
emory underscore smith at hotmail ¶
19 years ago
since its not stated explicitly above, thought id point out that you arent limited to using integers.
however, be careful when doing so, as you might not get the range you expect!
to illustrate:
<?php
$am = range(500,1600,10);
$fm = range(88.1,107.9,.2);
print_r($am);
print_r($fm);
?>
print_r($am) yields the expected result:
Array
(
[0] => 500
[1] => 510
[2] => 520
...
[109] => 1590
[110] => 1600
)
print_r($fm), however, falls a bit (1%) short:
Array
(
[0] => 88.1
[1] => 88.3
[2] => 88.5
...
[97] => 107.5
[98] => 107.7
)
so, if you want to use a non-integral step size params for numeric ranges, be sure to account for fp representation accuracy and error accumulation; a step size of something like pi or 1/10 could spell disaster for a large range. if in doubt, use integral steps and divide ... something like <?php range(88.1,108,.2) ?> might work to recover 107.9, but would not be scalable like, say <?php array_map(create_function('$x','return $x/10;'),range(881,1079,2)) ?>.
-emory
subscription101 at hotmail dot com ¶
18 years ago
A much simpler way of creating a range of even numbers is by starting with an even number:
<?php
range(2, 10, 2);
?>
j dot gizmo at aon dot at ¶
20 years ago
i figured i'd add some more functionality to the myRange() functions below.
now you can, besides giving a $step parameter,
1. count backwards
2. count with letters
3. give whatever parameter you want, there's nothing (i know of) that will cause an endless loop (try a negative $step for the previous function....)
<?php
function myRange($num1, $num2, $step=1)
{
if (is_numeric($num1) && is_numeric($num2))
{
//we have a numeric range
$step = ( abs($step)>0 ? abs($step) : 1 ); //make $step positive
$dir = ($num1<=$num2 ? 1 : -1); //get the direction
for($i = (float)$num1; $i*$dir <= $num2*$dir; $i += $step*$dir)
{
$temp[] = $i;
}
}
else
{
//we have a character range
$num1=ord((string)$num1); //convert to ascii value
$num2=ord((string)$num2);
$step = ( abs($step)>0 ? abs($step) : 1 ); //make $step positive
$dir = ($num1<=$num2 ? 1 : -1); //get direction
for($i = $num1; $i*$dir <= $num2*$dir; $i += $step*$dir)
{
$temp[] = chr($i);
}
}
return $temp;
}
print_r(myRange( 1, 3, 0.5 )); //you can use fractional steps
print_r(myRange( "a", "k", 3 )); //or count letters
print_r(myRange( "5", "9" )); //numbers are detected even if hidden in strtings
print_r(myRange( "!", "%", 1/pi() )); //or mess around with senseless parameters
?>
unicod3 at hotmail dot com ¶
10 years ago
a function to get column index by letter
function getColumnNumber($char){
$alphabet = range('a','z');
$alphabet2 = range('a','z');
$newAlphabet = $alphabet;
foreach($alphabet as $k => $r)
{
foreach($alphabet2 as $row){
$newAlphabet[] = $r.$row;
}
}
$key = array_search($char, $newAlphabet);
return ($key !== false) ? $key : null;
}
Aram Kocharyan ¶
13 years ago
Here's a function to generate ranges from strings:
<?php
/* Creates an array of integers based on a given range string of format "int - int"
Eg. range_str('2 - 5'); */
function range_str($str) {
preg_match('#(\\d+)\\s*-\\s*(\\d+)#', $str, $matches);
if ( count($matches) == 3 ) {
return range($matches[1], $matches[2]);
}
return FALSE;
}
// Test
$array = range_str(' 2 - 4 ');
print_r($array);
?>
This outputs:
Array
(
[0] => 2
[1] => 3
[2] => 4
)
