There are some things to note when working with mysqli::bind_param() and array-elements.
Re-assigning an array will break any references, no matter if the keys are identical.
You have to explicitly reassign every single value in an array, for the references to be kept.
Best shown in an example:
<?php
function getData() {
return array(
0=>array(
"name"=>"test_0",
"email"=>"test_0@example.com"
),
1=>array(
"name"=>"test_1",
"email"=>"test_1@example.com"
)
);
}
$db = new mysqli("localhost","root","","tests");
$sql = "INSERT INTO `user` SET `name`=?,`email`=?";
$res = $db->prepare($sql);
// If you bind array-elements to a prepared statement, the array has to be declared first with the used keys:
$arr = array("name"=>"","email"=>"");
$res->bind_param("ss",$arr['name'],$arr['email']);
//So far the introduction...
/*
Example 1 (wont work as expected, creates two empty entries)
Re-assigning the array in the while()-head generates a new array, whereas references from bind_param stick to the old array
*/
foreach( getData() as $arr ) {
$res->execute();
}
/*
Example 2 (will work as expected)
Re-assigning every single value explicitly keeps the references alive
*/
foreach( getData() as $tempArr ) {
foreach($tempArr as $k=>$v) {
$arr[$k] = $v;
}
$res->execute();
}
?>
mysqli_stmt::bind_param
mysqli_stmt_bind_param
(PHP 5, PHP 7, PHP 8)
mysqli_stmt::bind_param -- mysqli_stmt_bind_param — プリペアドステートメントのパラメータに変数をバインドする
説明
オブジェクト指向型
手続き型
mysqli_prepare() や mysqli_stmt_prepare() で準備された、 SQLステートメントのパラメータマーカに変数をバインドします。
注意:
データのサイズがパケットサイズの最大値（max_allowed_packet）を こえた場合、
typesにbを 指定して mysqli_stmt_send_long_data() を使用し、 データをパケットに分割して送信する必要があります。
注意:
mysqli_stmt_bind_param() と call_user_func_array() を組み合わせて使う場合は注意が必要です。 mysqli_stmt_bind_param() へのパラメータは参照渡しでなければなりませんが、 call_user_func_array() には変数のリストをパラメータとして渡すことができます。 この変数は参照であっても値であってもかまいません。
パラメータ
-
stmt -
手続き型のみ: mysqli_stmt_init() が返す mysqli_stmt オブジェクト。
-
types -
ひとつあるいは複数の文字で、対応するバインド変数の型を表します。
型指定文字 文字 説明 i 対応する変数の型は int です。 d 対応する変数の型は float です。 s 対応する変数の型は string です。 b 対応する変数の型は blob で、複数のパケットに分割して送信されます。 -
var -
vars -
変数の数。文字列
typesの長さは、ステートメント中のパラメータの数と一致する必要があります。
戻り値
成功した場合に true を、失敗した場合に false を返します。
エラー / 例外
mysqli のエラー報告 (MYSQLI_REPORT_ERROR) が有効になっており、かつ要求された操作が失敗した場合は、警告が発生します。さらに、エラー報告のモードが MYSQLI_REPORT_STRICT に設定されていた場合は、mysqli_sql_exception が代わりにスローされます。
例
例1 mysqli_stmt::bind_param() の例
オブジェクト指向型
<?php
mysqli_report(MYSQLI_REPORT_ERROR | MYSQLI_REPORT_STRICT);
$mysqli = new mysqli('localhost', 'my_user', 'my_password', 'world');
$stmt = $mysqli->prepare("INSERT INTO CountryLanguage VALUES (?, ?, ?, ?)");
$stmt->bind_param('sssd', $code, $language, $official, $percent);
$code = 'DEU';
$language = 'Bavarian';
$official = "F";
$percent = 11.2;
$stmt->execute();
printf("%d row inserted.\n", $stmt->affected_rows);
/* CountryLanguage テーブルを削除します */
$mysqli->query("DELETE FROM CountryLanguage WHERE Language='Bavarian'");
printf("%d row deleted.\n", $mysqli->affected_rows);手続き型
<?php
mysqli_report(MYSQLI_REPORT_ERROR | MYSQLI_REPORT_STRICT);
$link = mysqli_connect('localhost', 'my_user', 'my_password', 'world');
$stmt = mysqli_prepare($link, "INSERT INTO CountryLanguage VALUES (?, ?, ?, ?)");
mysqli_stmt_bind_param($stmt, 'sssd', $code, $language, $official, $percent);
$code = 'DEU';
$language = 'Bavarian';
$official = "F";
$percent = 11.2;
mysqli_stmt_execute($stmt);
printf("%d row inserted.\n", mysqli_stmt_affected_rows($stmt));
/* CountryLanguage テーブルを削除します */
mysqli_query($link, "DELETE FROM CountryLanguage WHERE Language='Bavarian'");
printf("%d row deleted.\n", mysqli_affected_rows($link));上の例の出力は以下となります。
1 row inserted. 1 row deleted.
例2 引数を渡すために ... を使う
可変長の引数を渡すために、
... 演算子を使うことができます。
たとえば WHERE IN 条件で使えます。
<?php
mysqli_report(MYSQLI_REPORT_ERROR | MYSQLI_REPORT_STRICT);
$mysqli = new mysqli('localhost', 'my_user', 'my_password', 'world');
$stmt = $mysqli->prepare("SELECT Language FROM CountryLanguage WHERE CountryCode IN (?, ?)");
/* Using ... to provide arguments */
$stmt->bind_param('ss', ...['DEU', 'POL']);
$stmt->execute();
$stmt->store_result();
printf("%d rows found.\n", $stmt->num_rows());上の例の出力は以下となります。
10 rows found.
参考
- mysqli_stmt_bind_result() - 結果を保存するため、プリペアドステートメントに変数をバインドする
- mysqli_stmt_execute() - プリペアドステートメントを実行する
- mysqli_stmt_fetch() - プリペアドステートメントから結果を取得し、バインド変数に格納する
- mysqli_prepare() - 実行するための SQL文 を準備する
- mysqli_stmt_send_long_data() - データをブロックで送信する
- mysqli_stmt_errno() - 直近のステートメントのコールに関するエラーコードを返す
- mysqli_stmt_error() - 直近のステートメントのエラー内容を文字列で返す
add a note
User Contributed Notes 40 notes
jk at jankriedner dot de ¶
13 years ago
wapharshitsingh at gmail dot com ¶
3 years ago
just wanted to share here, how we can use prepare statement with the combination of ... operator effectively .
<?php
class Database{
private function getTypeofValues($string, $value){
if(is_float($value)){
$string .= "d";
}elseif(is_integer($value)){
$string .= "i";
}elseif(is_string($value)){
$string .= "s";
}else{
$string .= "b";
}
return $string;
}
public function makeQuery($query, array $values){
$stmt = $this->connection->prepare($query);
$type = array_reduce($values, array($this, "getTypeOfValues"));
$stmt->bind_param($type, ...$values);
$stmt->execute();
$result = $stmt->get_result();
return $result;
}
}
?>
Miguel Hatrick ¶
15 years ago
This might be helpful for someone. I made a class to manage the parameters
Its used like this:
<?php
$stmt = $mysqli->prepare("CALL item_add(?, ?, ?, ?)");
$sp = new Statement_Parameter();
$sp->Add_Parameter('mydescription', Statement_Parameter_Type::$STATEMENT_TYPE_STRING);
$sp->Add_Parameter('myean', Statement_Parameter_Type::$STATEMENT_TYPE_STRING);
$sp->Add_Parameter('myprice', Statement_Parameter_Type::$STATEMENT_TYPE_DOUBLE);
$sp->Add_Parameter('myactive', Statement_Parameter_Type::$STATEMENT_TYPE_INTEGER);
// call this to bind the parameters
$sp->Bind_Params($stmt);
//you can then modify the values as you wish
$sp->Set_Parameter('myactive',0);
$sp->Set_Parameter('mydescription','whatever');
/* execute prepared statement */
$stmt->execute();
class Statement_Parameter
{
private $_array = array();
public function __constructor()
{
}
public function Add_Parameter($name, $type, $value = NULL)
{
$this->_array[$name] = array("type" => $type, "value" => $value);
}
public function Get_Type_String()
{
$types = "";
foreach($this->_array as $name => $la)
$types .= $la['type'];
return $types;
}
public function Set_Parameter($name, $value)
{
if (isset($this->_array[$name]))
{
$this->_array[$name]["value"] = $value;
return true;
}
return false;
}
public function Bind_Params(&$stmt)
{
$ar = Array();
$ar[] = $this->Get_Type_String();
foreach($this->_array as $name => $la)
$ar[] = &$this->_array[$name]['value'];
return call_user_func_array(array($stmt, 'bind_param'),$ar);
}
}
class Statement_Parameter_Type
{
public static $STATEMENT_TYPE_INTEGER = 'i';
public static $STATEMENT_TYPE_DOUBLE = 'd';
public static $STATEMENT_TYPE_STRING = 's';
public static $STATEMENT_TYPE_BLOB = 'b';
}
?>
Anonymous ¶
13 years ago
Blob and null handling aside, a couple of notes on how param values are automatically converted and forwarded on to the Mysql engine based on your type string argument:
1) PHP will automatically convert the value behind the scenes to the underlying type corresponding to your binding type string. i.e.:
<?php
$var = true;
bind_param('i', $var); // forwarded to Mysql as 1
?>
2) Though PHP numbers cannot be reliably cast to (int) if larger than PHP_INT_MAX, behind the scenes, the value will be converted anyway to at most long long depending on the size. This means that keeping in mind precision limits and avoiding manually casting the variable to (int) first, you can still use the 'i' binding type for larger numbers. i.e.:
<?php
$var = '429496729479896';
bind_param('i', $var); // forwarded to Mysql as 429496729479900
?>
3) You can default to 's' for most parameter arguments in most cases. The value will then be automatically cast to string on the back-end before being passed to the Mysql engine. Mysql will then perform its own conversions with values it receives from PHP on execute. This allows you to bind not only to larger numbers without concern for precision, but also to objects as long as that object has a '__toString' method.
This auto-string casting behavior greatly improves things like datetime handling. For example: if you extended DateTime class to add a __toString method which outputs the datetime format expected by Mysql, you can just bind to that DateTime_Extended object using type 's'. i.e.:
<?php
// DateTime_Extended has __toString defined to return the Mysql formatted datetime
$var = new DateTime_Extended;
bind_param('s', $var); // forwarded to Mysql as '2011-03-14 17:00:01'
?>
Kai Sellgren ¶
15 years ago
A few notes on this function.
If you specify type "i" (integer), the maximum value it allows you to have is 2^32-1 or 2147483647. So, if you are using UNSIGNED INTEGER or BIGINT in your database, then you are better off using "s" (string) for this.
Here's a quick summary:
(UN)SIGNED TINYINT: I
(UN)SIGNED SMALLINT: I
(UN)SIGNED MEDIUMINT: I
SIGNED INT: I
UNSIGNED INT: S
(UN)SIGNED BIGINT: S
(VAR)CHAR, (TINY/SMALL/MEDIUM/BIG)TEXT/BLOB should all have S.
FLOAT/REAL/DOUBLE (PRECISION) should all be D.
That advice was for MySQL. I have not looked into other database software.
Darren ¶
12 years ago
For those learning mysqli::prepare and mysqli_stmt::bind_params for the first time, here is a commented block of code which executes prepared queries and returns data in a similar format to the return values of mysqli_query. I tried to minimize unnecessary classes, objects, or overhead for two reasons:
1) facilitate learning
2) allow relativity interchangeable use with mysqli_query
My goal is to lower the learning curve for whoever is starting out with these family of functions. I am by no means an expert coder/scripter, so I am sure there are improvements and perhaps a few bugs, but I hope not =)
<?php
/*
Function: mysqli_prepared_query()
Executes prepared querys given query syntax, and bind parameters
Returns data in array format
Arguments:
mysqli_link
mysqli_prepare query
mysqli_stmt_bind_param argmuent list in the form array($typeDefinitinonString, $var1 [, mixed $... ])
Return values:
When given SELECT, SHOW, DESCRIBE or EXPLAIN statements: returns table data in the form resultArray[row number][associated field name]
Returns number of rows affacted when given other queries
Returns FALSE on error
*/
function mysqli_prepared_query($link,$sql,$bindParams = FALSE){
if($stmt = mysqli_prepare($link,$sql)){
if ($bindParams){
$bindParamsMethod = new ReflectionMethod('mysqli_stmt', 'bind_param'); //allows for call to mysqli_stmt->bind_param using variable argument list
$bindParamsReferences = array(); //will act as arguments list for mysqli_stmt->bind_param
$typeDefinitionString = array_shift($bindParams);
foreach($bindParams as $key => $value){
$bindParamsReferences[$key] = &$bindParams[$key];
}
array_unshift($bindParamsReferences,$typeDefinitionString); //returns typeDefinition as the first element of the string
$bindParamsMethod->invokeArgs($stmt,$bindParamsReferences); //calls mysqli_stmt->bind_param suing $bindParamsRereferences as the argument list
}
if(mysqli_stmt_execute($stmt)){
$resultMetaData = mysqli_stmt_result_metadata($stmt);
if($resultMetaData){
$stmtRow = array(); //this will be a result row returned from mysqli_stmt_fetch($stmt)
$rowReferences = array(); //this will reference $stmtRow and be passed to mysqli_bind_results
while ($field = mysqli_fetch_field($resultMetaData)) {
$rowReferences[] = &$stmtRow[$field->name];
}
mysqli_free_result($resultMetaData);
$bindResultMethod = new ReflectionMethod('mysqli_stmt', 'bind_result');
$bindResultMethod->invokeArgs($stmt, $rowReferences); //calls mysqli_stmt_bind_result($stmt,[$rowReferences]) using object-oriented style
$result = array();
while(mysqli_stmt_fetch($stmt)){
foreach($stmtRow as $key => $value){ //variables must be assigned by value, so $result[] = $stmtRow does not work (not really sure why, something with referencing in $stmtRow)
$row[$key] = $value;
}
$result[] = $row;
}
mysqli_stmt_free_result($stmt);
} else {
$result = mysqli_stmt_affected_rows($stmt);
}
mysqli_stmt_close($stmt);
} else {
$result = FALSE;
}
} else {
$result = FALSE;
}
return $result;
}
?>
Here's hoping the PHP gods don't smite me.
canche_x at yahoo dot com ¶
14 years ago
Hi, I just write a function to do all my sql statements based on all the others comments in this page, maybe it can be useful for someone else :)
Usage:
execSQL($sql, $parameters, $close);
$sql = Statement to execute;
$parameters = array of type and values of the parameters (if any)
$close = true to close $stmt (in inserts) false to return an array with the values;
Examples:
execSQL("SELECT * FROM table WHERE id = ?", array('i', $id), false);
execSQL("SELECT * FROM table", array(), false);
execSQL("INSERT INTO table(id, name) VALUES (?,?)", array('ss', $id, $name), true);
<?php
function execSQL($sql, $params, $close){
$mysqli = new mysqli("localhost", "user", "pass", "db");
$stmt = $mysqli->prepare($sql) or die ("Failed to prepared the statement!");
call_user_func_array(array($stmt, 'bind_param'), refValues($params));
$stmt->execute();
if($close){
$result = $mysqli->affected_rows;
} else {
$meta = $stmt->result_metadata();
while ( $field = $meta->fetch_field() ) {
$parameters[] = &$row[$field->name];
}
call_user_func_array(array($stmt, 'bind_result'), refValues($parameters));
while ( $stmt->fetch() ) {
$x = array();
foreach( $row as $key => $val ) {
$x[$key] = $val;
}
$results[] = $x;
}
$result = $results;
}
$stmt->close();
$mysqli->close();
return $result;
}
function refValues($arr){
if (strnatcmp(phpversion(),'5.3') >= 0) //Reference is required for PHP 5.3+
{
$refs = array();
foreach($arr as $key => $value)
$refs[$key] = &$arr[$key];
return $refs;
}
return $arr;
}
?>
Regards
asphp at dsgml dot com ¶
7 years ago
Instead of reflection or complicated ref assigning do this:
<?
mysqli_stmt_bind_param($stmt, ...$params);
//(Only works in php 5.6+)
//Example:
//$mysql is from mysqli_connect()
//$sql is the query
//$types is the type string eg 'ii'
//$params is an array of params
function execute($mysqli, $sql, $types, $params) {
$stmt = mysqli_prepare($mysqli, $sql);
mysqli_stmt_bind_param($stmt, $types, ...$params);
mysqli_stmt_execute($stmt);
return mysqli_stmt_get_result($stmt);
}
?>
You can have the types as the first element of the array as in the first example, or as a separate variable as in the second example.
Guido ¶
12 years ago
Dear all,
I was searching for a class which supports multiple calls to bind_param, because I have scenarios where I build huge SQL statements over different functions with variable numbers of parameters. But I didn't found one. So I have just written up this little piece of code I would like to share with you. There is enough room to optimize these classes, but it shows the general idea. And for me it works. In mbind_param_do() it seems to depend from the PHP version if makeValuesReferenced() must be used or if $params can be used directly. In my case I have to use it.
The cool thing about this solution: You don't have to care about a lot if you are using my mbind_ functions or not. You may also use default bind_param and the execute will still work.
<?php
class db extends mysqli {
public function prepare($query) {
return new stmt($this,$query);
}
}
class stmt extends mysqli_stmt {
public function __construct($link, $query) {
$this->mbind_reset();
parent::__construct($link, $query);
}
public function mbind_reset() {
unset($this->mbind_params);
unset($this->mbind_types);
$this->mbind_params = array();
$this->mbind_types = array();
}
//use this one to bind params by reference
public function mbind_param($type, &$param) {
$this->mbind_types[0].= $type;
$this->mbind_params[] = &$param;
}
//use this one to bin value directly, can be mixed with mbind_param()
public function mbind_value($type, $param) {
$this->mbind_types[0].= $type;
$this->mbind_params[] = $param;
}
public function mbind_param_do() {
$params = array_merge($this->mbind_types, $this->mbind_params);
return call_user_func_array(array($this, 'bind_param'), $this->makeValuesReferenced($params));
}
private function makeValuesReferenced($arr){
$refs = array();
foreach($arr as $key => $value)
$refs[$key] = &$arr[$key];
return $refs;
}
public function execute() {
if(count($this->mbind_params))
$this->mbind_param_do();
return parent::execute();
}
private $mbind_types = array();
private $mbind_params = array();
}
$search1 = "test1";
$search2 = "test2";
$_db = new db("host","user","pass","database");
$query = "SELECT name FROM table WHERE col1=? AND col2=?";
$stmt = $_db->prepare($query);
$stmt->mbind_param('s',$search1);
//this second call is the cool thing!!!
$stmt->mbind_param('s',$search2);
$stmt->execute();
//this would still work!
//$search1 = "test1changed";
//$search2 = "test2changed";
//$stmt->execute();
...
$stmt->store_result();
$stmt->bind_result(...);
$stmt->fetch();
?>
davidharrison at gmail dot com ¶
7 years ago
There are two solutions in this page for calling bind_param() via call_user_func_array() that involve using a user-created function called refValues(), so that you can pass the parameters to bind_param() as references.
This works perfectly in PHP v5.3 (and I assume before), but since upgrading to PHP v7.1.7, the refValues() functions here no longer correctly convert the arrays to arrays of references. Instead you will get a warning:
"PHP Warning: Parameter 3 to mysqli_stmt_bind_param() expected to be a reference, value given"
I believe this is because of changes to arrays and reference handling as noted in the "Migrating from PHP 5.6.x to PHP 7.0.x" guide in Backwards Incompatibilities (change: "foreach by-value operates on a copy of the array").
So in PHP v7.1.7 at least, the user-created function refValues() no longer returns an array of references but instead a normal array of values.
Changing the function definition of refValues() to accept the array as a reference seems to fix this - as intended it returns an array of references and thus bind_param() works as expected (although I haven't tested this super thoroughly to make sure there are no other ill effects, especially in older versions of PHP).
New refValues() definition is simply:
<?php
function refValues(&$arr) // Changed $arr to reference for PHP v7.1.7
{
if (strnatcmp(phpversion(),'5.3') >= 0) //Reference is required for PHP 5.3+
{
$refs = array();
foreach($arr as $key => $value)
$refs[$key] = &$arr[$key];
return $refs;
}
return $arr;
}
?>
travis at twooutrally dot com ¶
8 years ago
Parameter type matters more than you might think!
A cautionary tail to any who would seek to find less than thorough solutions for automating prepared statements. Take the following mysqli_stmt extension method for example.
<?php
public function param_type($param)
{
if (ctype_digit((string) $param)
return $param <= PHP_INT_MAX ? 'i' : 's';
if (is_numeric($param))
return 'd';
return 's';
}
?>
At face value this seems like a perfectly straightforward and innocuous function. Something like this served as a small piece in a larger automation extension which dutifully served its purpose efficiently handling hundreds of thousands of queries a day.
Now I know what you're thinking: it doesn't handle blob types. Well we didn't work with blob types (and still don't) so that's never been an issue. This problem was far more insidious and ultimately pernicious than that.
So what went wrong? The problem began to surface when we started automating SELECT queries on a newly created index for a column designed to store telephone numbers. The column was of type VARCHAR but the data stored was always formatted as an integer. Not a problem when performing a write operation but as soon as we went to read from the table on this index everything went to hell.
We're not entirely sure, but as near as we can tell the act of binding a parameter to a VARCHAR index as 'i' instead of 's' on a read query is detrimental in the following way: MySQL will ignore the b-tree on the index and perform a full table scan. With smaller tables this may never present itself as a significant performance issue. When your tables get into the tens of millions of rows, however...
user at mail dot com ¶
13 years ago
I had a problem with the LIKE operator
This code did not work:
<?php
$test = $sql->prepare("SELECT name FROM names WHERE name LIKE %?%");
$test->bind_param("s", $myname);
?>
The solution is:
<?php
$test = $sql->prepare("SELECT name FROM names WHERE name LIKE ?");
$param = "%" . $myname . "%";
$test->bind_param("s", $param);
?>
bboymarco ¶
9 years ago
I did for myself a really useful function (cause I didn't want to use eval() or reflection) that create for you a prepared statement with an indefinite number of parameters and return an indefinite number of result columns. Last two arguments are optional so when you don't have parameters to send to MySQL you can avoid them. I decided to share it here cause it may be helpful and save some time and brainstorming:
function prepared_stmt($con, $query, $type = "", $param = array()){
if($stmt = mysqli_prepare($con, $query)){
$refarg = array($stmt, $type);//First two parameter of mysqli_stmt_bind_param
foreach ($param as $key => $value)//create array of parameters' references
$refarg[] =& $param[$key];
if($type != "")//Jump instruction if argument $type is missing
call_user_func_array("mysqli_stmt_bind_param", $refarg);//bind parameters with dinamic length
if(mysqli_stmt_execute($stmt)){//check if execution go fine
$cols = mysqli_field_count($con);//retrive the number of columns of the resultset
$result = array_fill(0, $cols, NULL);//create an empty array with the same length of the columns
$ref = array($stmt);//first argument of mysqli_stmt_bind_result
foreach ($result as $key => $value)//create array of empty cells' references
$ref[] =& $result[$key];
call_user_func_array("mysqli_stmt_bind_result", $ref);//bind results with dinamic length
return $ref;//return statement and columns references
}//if
else
return false;
}//if
else
return false;
}//prepared_stmt
Example of call:
$hello = prepared_stmt($con, "SELECT Example FROM table WHERE Col=?", "s", array("LOL");
//count($hello) is equal to 2
//$hello[0] Statement reference
//$hello[1] Example column field where to find values after fetching
while(mysqli_stmt_fetch($hello[0]))
echo $hello[1] . "<br>";//This will print all value of the Example column
fabio at kidopi dot com dot br ¶
14 years ago
I used to have problems with call_user_func_array and bind_param after migrating to php 5.3.
The problem is that 5.3 requires array values as reference while 5.2 works with real values.
so i created a secondary function to help me with this...
<?php
function refValues($arr){
if (strnatcmp(phpversion(),'5.3') >= 0) //Reference is required for PHP 5.3+
{
$refs = array();
foreach($arr as $key => $value)
$refs[$key] = &$arr[$key];
return $refs;
}
return $arr;
}
?>
and changed my previous function from:
<?php
call_user_func_array(array($this->stmt, "bind_param"),$this->valores);
?>
to:
<?php
call_user_func_array(array($this->stmt, "bind_param"),refValues($this->valores));
?>
in this way my db functions keep working in php 5.2/5.3 servers.
I hope this help someone.
nick9v at hotmail dot com ¶
12 years ago
When dealing with a dynamic number of field values while preparing a statement I find this class useful.
<?php
class BindParam{
private $values = array(), $types = '';
public function add( $type, &$value ){
$this->values[] = $value;
$this->types .= $type;
}
public function get(){
return array_merge(array($this->types), $this->values);
}
}
?>
Usage is pretty simple. Create an instance and use the add method to populate. When you're ready to execute simply use the get method.
<?php
$bindParam = new BindParam();
$qArray = array();
$use_part_1 = 1;
$use_part_2 = 1;
$use_part_3 = 1;
$query = 'SELECT * FROM users WHERE ';
if($use_part_1){
$qArray[] = 'hair_color = ?';
$bindParam->add('s', 'red');
}
if($use_part_2){
$qArray[] = 'age = ?';
$bindParam->add('i', 25);
}
if($use_part_3){
$qArray[] = 'balance = ?';
$bindParam->add('d', 50.00);
}
$query .= implode(' OR ', $qArray);
//call_user_func_array( array($stm, 'bind_param'), $bindParam->get());
echo $query . '<br/>';
var_dump($bindParam->get());
?>
This gets you the result that looks something like this:
SELECT * FROM users WHERE hair_color = ? OR age = ? OR balance = ?
array(4) { [0]=> string(3) "sid" [1]=> string(3) "red" [2]=> int(25) [3]=> float(50) }
[Editor's note: changed BindParam::add() to accept $value by reference and thereby prevent a warning in newer versions of PHP.]
Anonymous ¶
13 years ago
You can bind to variables with NULL values, and on update and insert queries, the corresponding field will be updated to NULL no matter what bind string type you associated it with. But, for parameters meant for the WHERE clause (ie where field = ?), the query will have no effect and produce no results.
When comparing a value against NULL, the MYSQL syntax is either "value IS NULL" or "value IS NOT NULL". So, you can't pass in something like "WHERE (value = ?)" and expect this to work using a null value parameter.
Instead, you can do something like this in your WHERE clause:
"WHERE (IF(ISNULL(?), field1 is null, field1 = ?))"
Then, pass in the value you want to test twice:
bind_param('ss', $value1, $value1);
tomasz at marcinkowski dot pl ¶
10 years ago
When trying to bind a string param you get a "Number of variables doesn't match number of parameters in prepared statement" error, make sure you're not wrapping the question mark with quotes.
By mistake I had a query like:
SELECT something FROM table WHERE param_name = "?"
Binding it with <?php $stmt->bind('s', $param_value); ?> had been failing on me. All I had to do was to remove quotes around "?".
Hope this saves someone's time.
asb(.d o,t )han(a t)n i h e i(d.o_t)dk ¶
13 years ago
It should be noted that MySQL has some issues regarding the use of the IN clause in prepared statements.
I.e. the code:
<?php
$idArr = "1, 2, 3, 4";
$int_one = 1;
$int_two = 2;
$int_three = 3;
$int_four = 4;
$db = new MySQLi();
$bad_stmt = $db->prepare(SELECT `idAsLetters` FROM `tbl` WHERE `id` IN(?));
$bad_stmt->bind_param("s", $idArr);
$bad_stmt->bind_result($ias);
$bad_stmt->execute();
echo "Bad results:" . PHP_EOL;
while($stmt->fetch()){
echo $ias . PHP_EOL;
}
$good_stmt->close();
$good_stmt = $db->prepare(SELECT `idAsLetters` FROM `tbl` WHERE `id` IN(?, ?, ?, ?));
$good_stmt->bind_param("iiii", $int_one, $int_two, $int_three, $int_four);
$good_stmt->bind_result($ias);
$good_stmt->execute();
echo "God results:" . PHP_EOL;
while($stmt->fetch()){
echo $ias . PHP_EOL;
}
$bad_stmt->close();
$db->close();
?>
will print this result:
Bad results:
one
Good results:
one
two
three
four
Using "IN(?)" in a prepared statement will return just one (the first) row from a table/view. This is not an error in PHP, but merely how MySQL handles prepared statements.
accountant ¶
7 years ago
if bind_param() fails due to Number of elements in type definition string doesn't match number of bind variables. it triggers an E_WARNING error. and you will not find that error in $stmt->error property
samishiikihaku23 at gmail dot com ¶
12 years ago
NOTES to new users! Or programmers like myself who learn the hard way!!!
Pay attention to the variables that are given in the function up above. ( string $types , mixed &$var1 [, mixed &$... ] ) . The example shows this too, but I personally didn't get it 'til trying to debug my code.
ITS REQUIRED TO PASS VARIABLES HERE. You can not pass straight data through here.
$stmt->bind('s','Something here'); Will error!!!
Just a clarification as to avoid another night like mine last night and this morning.
eisoft ¶
14 years ago
I did a prepared statement for inserting in a simple table - images ( blob ) and their unique identifiers ( string ). All my blobs have smaller sizes than the MAX-ALLOWED-PACKET value.
I've found that when binding my BLOB parameter, I need to pass it as a STRING, otherwise it's truncated to zero length in my table. So I have to do this:
<?php
$ok = $stmt->bind_param( 'ss', $id, $im ) ;
?>
Mahees ¶
15 years ago
///////////////////////////////
Im sure many of you may want to use this functionality.
spent about 3hours writing this, so maybe i can save somone else some time, you can break it up into smaller functions for reuse as you wish.
the mysqli stmt bind param (mysqli_stmt_bind_param) function only takes one variable at a time, so its difficult to pass in a few variables to fill in the placeholder space.
this allows mysqli prepared statements with variable arguments, one sql template with multiple placeholders to be prepared and excuted.
hope this helps somone,
Mahees.
///////////////////////////////
<?php
$uname = 'mahees';
$pass = 'mahees';
$userPassArr = DataAccess::fetch('SELECT * FROM users WHERE username = ? AND password = ?', $uname, $pass);
print_r($userPassArr);
/*
Array
(
[0] => Array
(
[id] => 1
[username] => mahees
[password] => mahees
)
)
*/
$userPassArr = DataAccess::fetch('SELECT * FROM users');
print_r($userPassArr);
/*
Array
(
[0] => Array
(
[id] => 1
[username] => mahees
[password] => mahees
)
[1] => Array
(
[id] => 4
[username] => foo
[password] => bar
)
[2] => Array
(
[id] => 5
[username] => bar
[password] => baz
)
)
*/
//********* function in DataAccess class *********
//im sure this can be written better with more checks...but principle stands
static function fetch() {
$args = func_get_args();
$sql = array_shift($args);
$link = self::establish_db_conn();
if (!$stmt = mysqli_prepare($link, $sql)) {
self::close_db_conn();
die('Please check your sql statement : unable to prepare');
}
$types = str_repeat('s', count($args));
array_unshift($args, $types);
array_unshift($args, $stmt);
call_user_func_array('mysqli_stmt_bind_param', $args);
mysqli_stmt_execute($stmt);
$result = mysqli_stmt_result_metadata($stmt);
$fields = array();
while ($field = mysqli_fetch_field($result)) {
$name = $field->name;
$fields[$name] = &$$name;
}
array_unshift($fields, $stmt);
call_user_func_array('mysqli_stmt_bind_result', $fields);
array_shift($fields);
$results = array();
while (mysqli_stmt_fetch($stmt)) {
$temp = array();
foreach($fields as $key => $val) { $temp[$key] = $val; }
array_push($results, $temp);
}
mysqli_free_result($result);
mysqli_stmt_close($stmt);
self::close_db_conn();
return $results;
}
?>
rejohns at nOsPaMpost dot harvard dot edu ¶
14 years ago
You can, in fact, use mysqli_bind_parameter to pass a NULL value to the database. simply create a variable and store the NULL value (see the manpage for it) to the variable and bind that. Works great for me anyway.
xianrenb at gmail dot com ¶
12 years ago
It is believed that if one has specified 'b' in $types, the corresponding variable should be set to null, and one has to use mysqli_stmt::send_long_data() or mysqli_stmt_send_long_data() to send the blob, otherwise the blob value would be treated as empty.
flame ¶
17 years ago
Columns with type bigint need to be specified as type 'd' NOT 'i'.
Using 'i' results in large numbers (eg 3000169151) being truncated.
--
flame
robstocki at battlesecure dot com ¶
12 years ago
Here is the procedural version of a select statement when wanting to use %LIKE% in the query and not an '=':
<?php
function db_connect(){
// set $db as global for access outside function
global $db;
# Use procedural methods for database connection and manipulation
// Connect to Database
@$db = mysqli_connect(DB_HOST, DB_USER, DB_PASSWORD, DB_NAME);
// Check connection
if(mysqli_connect_errno()) {
echo '<br />Error: Could not connect to database. Please try again later.<br />';
exit;
}
}
// Connect to Database
db_connect();
$theRecordInTheTableIs = "%".$_POST['theRecordInTheTableIs']."%"; // concat $_POST variable with % on each side for use in prepared statement
$theRelatedRecordLooks = "%".$_POST['theRelatedRecordLooks']."%"; // concat $_POST variable with % on each side for use in prepared statement
// Create Query
$q = ''; // create variable for input
$q .= " SELECT ";
$q .= " * ";
$q .= " FROM ";
$q .= " myFavTable ";
$q .= " WHERE ";
$q .= " theRecordInTheTableIs LIKE ? ";
$q .= " AND ";
$q .= " theRelatedRecordLooks LIKE ? ";
// Prepare the statement
$stmt = mysqli_prepare($db, $q);
// bind the paramaters
mysqli_stmt_bind_param($stmt, 'ss', $theRecordInTheTableIs,$theRelatedRecordLooks);
// Execute the query
mysqli_stmt_execute($stmt);
// bind result variables
mysqli_stmt_bind_result($stmt, $col0, $col1, $col2, $col3, $col4, $col5, $col6, $col7, $col8, $col9, $col10);
// Display the query
// start the table
echo '<table>
<tr>
<td>Col0 Title</td>
<td>Col1 Title</td>
<td>Col2 Title</td>
<td>Col3 Title</td>
<td>Col4 Title</td>
<td>Col5 Title</td>
<td>Col6 Title</td>
<td>Col7 Title</td>
<td>Col8 Title</td>
<td>Col9 Title</td>
<td>Col10 Title</td>
</tr>';
// fetch values
while (mysqli_stmt_fetch($stmt)) {
echo " <tr>
<td>{$col0}</td>
<td>{$col1}</td>
<td>{$col2}</td>
<td>{$col3}</td>
<td>{$col4}</td>
<td>{$col5}</td>
<td>{$col6}</td>
<td>{$col7}</td>
<td>{$col8}</td>
<td>{$col9}</td>
<td>{$col10}</td>
</tr> ";
}
// close the table
echo '</table>';
?>
Ole Clausen ¶
13 years ago
A lot of newcommers to mysqli find it hard to get started. I have written this wrapper with object based response, that handles most of my queries. I hope it'll be usefull for others as well:
<?php
define('DB_HOST', 'localhost');
define('DB_USERNAME', '');
define('DB_PASSWORD', '');
define('DB_DEFAULT_DB', 'test');
function iQuery($sql, $arrParams, $arrBindNames=false) {
$result = new stdClass();
$mysqli = @new mysqli(DB_HOST, DB_USERNAME, DB_PASSWORD, DB_DEFAULT_DB);
if (mysqli_connect_errno()) {
$result->error = 'Connection failed: '.mysqli_connect_error();
return $result;
}
if ($stmt = $mysqli->prepare($sql)) {
$method = new ReflectionMethod('mysqli_stmt', 'bind_param');
$method->invokeArgs($stmt, $arrParams);
$stmt->execute();
$meta = $stmt->result_metadata();
if (!$meta) {
$result->affected_rows = $stmt->affected_rows;
$result->insert_id = $stmt->insert_id;
} else {
$stmt->store_result();
$params = array();
$row = array();
if ($arrBindNames) {
for ($i=0,$j=count($arrBindNames); $i<$j; $i++) {
$params[$i] = &$row[$arrBindNames[$i]];
}
} else {
while ($field = $meta->fetch_field()) {
$params[] = &$row[$field->name];
}
}
$meta->close();
$method = new ReflectionMethod('mysqli_stmt', 'bind_result');
$method->invokeArgs($stmt, $params);
$result->rows = array();
while ($stmt->fetch()) {
$obj = new stdClass();
foreach($row as $key => $val) {
$obj->{$key} = $val;
}
$result->rows[] = $obj;
}
$stmt->free_result();
}
$stmt->close();
}
$mysqli->close();
return $result;
}
$arrParams = array('ss', $_POST['sex'], $_POST['active']);
$result = iQuery( 'SELECT * FROM `test_table` WHERE `sex`=? AND `active`=?', $arrParams);
print_r($result);
print $result->rows[1]->first_name . " " . $result->rows[1]->last_name;
?>
If $_POST['sex'] contains 'male' and $_POST['active'] contains 'yes' - and the field names are 'id', 'first_name', 'last_name', 'sex' and 'active', the printet result may look like this:
----------------------------------------------
stdClass Object
(
[rows] => Array
(
[0] => stdClass Object
(
[id] => 2
[first_name] => Peter
[last_name] => Johnson
[sex] => male
[active] => yes
)
[1] => stdClass Object
(
[id] => 5
[first_name] => Ole
[last_name] => Clausen
[sex] => male
[active] => yes
)
)
)
Ole Clausen
----------------------------------------------
You can also apply special field names to the response, if you use the parameter $arrBindNames:
$arrParams = array('ss', $_POST['sex'], $_POST['active']);
$arrNames = array('foo_id', 'bar_first', 'baz_last', 'foo_sex', 'bar_act');
$result = iQuery( 'SELECT * FROM `test_table` WHERE `sex`=? AND `active`=?', $arrParams, $arrNames);
- a row would then look like this:
[0] => stdClass Object
(
[foo_id] => 2
[bar_first] => Peter
[baz_last] => Johnson
[foo_sex] => male
[bar_act] => yes
)
The first argument 'ss' in $arrParams states, that the two following arguments are of type String. The options are 's' for String, 'i' for Integer, 'd' for Double and 'b' for Blob (sent in packages).
In queries, that do not return a result INSERT, UPDATE, etc. $result->affected_rows and $result->insert_id are available. Connection errors are available in $result->error. Additional error handling would be nice, but is not implemented for now. Play with the wrapper and use print_r on the result ... enjoy!
The name 'iQuery'? Well, it handles mysql*i* - and then I guess it's kind of a tribute to Mr. Jobs ... may he 'rest' in energetic, hungry foolishness =)
==
UPDATE: 08-NOV-2011 07:19
Due to changes in PHP 5.3 I encountered a problem with 'bind_param' in my iQuery function below. The values in the passed array *must* be references. The soloution is this function:
<?php
function getRefArray($a) {
if (strnatcmp(phpversion(),'5.3')>=0) {
$ret = array();
foreach($a as $key => $val) {
$ret[$key] = &$a[$key];
}
return $ret;
}
return $a;
}
?>
- and this change in iQuery:
if ($stmt = $mysqli->prepare($sql)) {
$arrParams = getRefArray($arrParams); // <-- Added due to changes since PHP 5.3
$method = new ReflectionMethod('mysqli_stmt', 'bind_param');
$method->invokeArgs($stmt, $arrParams);
$stmt->execute();
$meta = $stmt->result_metadata();
psufan513 at aol dot com ¶
2 years ago
I wasn't able to find anything like this, I thought I would post it. If its garbage let me know and I will remove it!
//Usage:
//$query = prepare($db, "SELECT * FROM TABLE WHERE ID = %d AND NAME = %s", 1, 'foo');
//while ($row = $query->fetch_assoc())
// "Splat" ... operator requires PHP 5.6
function prepare($db, $sql, ...$params) {
if (preg_match_all('/%(\w)/sim', $sql, $types)) {
$sql = preg_replace('/%(\w)/sim', '?', $sql);
if ($stmt = $db->prepare($sql)) {
$stmt->bind_param(implode('', $types[1]), ...$params);
$stmt->execute();
$query = $stmt->get_result();
$stmt->close();
return $query;
} else {
echo 'Error: #' . $db->errno . ' ' . $db->error;
}
} else {
return $db->query($sql);
}
}
andersmmg at gmail dot com ¶
5 years ago
I sometimes forget that you can't put functions inside. For example:
If I wanted to use md5() on a value like so:
<?php
$stmt->bind_param("s",md5($val));
?>
If would not work. Because it uses the variables by binding them, you need to change them beforehand like this:
<?php
$val = md5($val);
$stmt->bind_param("s",$val);
?>
Matze ¶
8 years ago
Hey Folks,
just wanted to mention that parameters can only be used for input data, NOT for Table, Columns or Database names.
That gave me a headache yesterday!
So this code will not work:
$searchtype = "Title";
$searchterm = "The Fellowship of the Ring: The Lord of the Rings";
$query =
"SELECT ISBN, Author, Title, Price
FROM books
WHERE ? = ?";
$mySql_stmt = $db->prepare($query);
$mySql_stmt->bind_param("ss" , $searchtype, $searchterm);
$mySql_stmt->execute();
In contrast, you will have to include the searchtype in ther query directly like this:
$searchtype = "Title";
$searchterm = "The Fellowship of the Ring: The Lord of the Rings";
$query =
"SELECT ISBN, Author, Title, Price
FROM books
WHERE $searchtype = ?";
$mySql_stmt = $db->prepare($query);
$mySql_stmt->bind_param("s", $searchterm);
$mySql_stmt->execute();
Hope that helps someone to have a peaceful nights sleep :)
c at zp1 dot net ¶
3 years ago
It is very important to understand that you can not supply bind_param values
this will not work:
$stmt -> bind_param("s", "value");
you have to do it like this :
$var = "value";
$stmt -> bind_param("s", $var);
Darky ¶
7 years ago
A small remark from what I tried:
- if you use prepared statements with bind_param and your query looks like
"SELECT user_id FROM users WHERE ... = ?" and then you bind an integer param to this, the user_ids you get will be casted to int. On the other hand, if you don't use prepared statements, but sth like "SELECT user_id FROM users WHERE ... = $var", where $var is an int, and just make the query, the fetched results will be strings. (e.g., at var_dump, ["user_id"]=> string(1) "6" for some row)
This is just from what I observed in my project, hope it's correct.
laurence dot mackenzie at stream dot com ¶
11 years ago
I just came across a very strange behaviour when using bind_param() with a reflection class. I figured I ought to post it here to save anyone else who comes across it from banging their head against their desk for an hour (as I just did).
First, some background: I have a set of classes, one per file format (i.e. CSV, HTML table, etc), which import data from flat files to a temporary table in my database. The class then transforms the data to 3NF.
I'm using a reflection class to pass an array to mysqli->bind_param() because the column counts and types are variable. The code (simplified) I am having issues with is:
<?php
/* Code that loops through the rows and columns in the
* flat file and appends the MySQLi 'type' letter to the
* $typeString variable and appends the actual value
* to the $data array. I left the code out because it's
* (probably) not relevant and would bloat the post.
*/
$stmtInsert = $db->prepare('INSERT.....');
$typeString = 'ississis';
$data = array(1, 'two', 'three', 4, 'five', 'six', 7, 'eight');
/* Here's where the actual strangeness starts happening
*/
// Merge the parameter types with the parameter values
$data = array_merge((array) $typeString, $data);
// Create the reflection class
$ref = new \ReflectionClass('mysqli_stmt');
// Get the bind_param method
$method = $ref->getMethod('bind_param');
// Invoke it with $data
$method->invokeArgs($stmtInsert, $data);
// Execute the statement
$stmtInsert->execute();
}
?>
Oddly, in one (and only one) case it started throwing "Warning: Parameter 41 to mysqli_stmt::bind_param() expected to be a reference, value given". The reflection class throws an exception. Other import sets using this code work just fine. Parameter 41 is the last parameter. Changing the affected code as follows resolves the issue:
<?php
$ref = new \ReflectionClass("mysqli_stmt");
$method = $ref->getMethod("bind_param");
$data[count($data)-1] = (string) $data[count($data)-1];
$method->invokeArgs($stmtInsert, $data);
$stmtInsert->execute();
?>
Not sure what's going on here, but like I said, hopefully this will keep the next person from thinking they're totally insane.
erik at gravyllc dot com ¶
14 years ago
WOW! Thanks for the code that fixed the issue with mysqli_stmt_bind_param and PHP 5.3+. Worth sharing again for people getting the error message that a reference was expected and a value was provided. Here's a snippet and the whole function that fixed it!
//Use it like this
call_user_func_array('mysqli_stmt_bind_param', array_merge (array($sql_stmt, $type), $this->refValues($param)));
function refValues($arr)
{
if (strnatcmp(phpversion(),'5.3') >= 0) //Reference is required for PHP 5.3+
{
$refs = array();
foreach($arr as $key => $value)
$refs[$key] = &$arr[$key];
return $refs;
}
return $arr;
}
mark at x2software dot net ¶
16 years ago
I wanted to pass the parameters for several queries to a single function to fill them (insert / update having the same fields for example), while at the same time making the types array a bit easier to maintain when you've got a lot of parameters. Here's a simple solution I came up with:
<?php
function bindParameters(&$statement, &$params)
{
$args = array();
$args[] = implode('', array_values($params));
foreach ($params as $paramName => $paramType)
{
$args[] = &$params[$paramName];
$params[$paramName] = null;
}
call_user_func_array(array(&$statement, 'bind_param'), $args);
}
// Usage:
$statement = $database->prepare('INSERT INTO test (value1, value2) VALUES (?, ?)');
$params = array('param1' => 's',
'param2' => 'i');
bindParameters($statement, $params);
$params['param1'] = 'parameter test';
$params['param2'] = 42;
$statement->execute();
?>
Note that the types will be overwritten after a call to bindParameters to provide a sensible default (otherwise it will be used as the parameter value when you execute the statement), so you need to reinitialize the types if you want to bind it to another statement.
jette at nerdgirl dot dk ¶
16 years ago
I already have a database class that makes everything nice and easy. But when it came to preparing, binding and executing, I found it was a real challenge to boil things down.
But luckily I stumbled over a bug-report with a workaround, that pointed me in the right direction.: http://bugs.php.net/bug.php?id=43568
I now execute stored procedures (aka routines) like this:
<?php
$db = new myDb();
$db->execProcedure('call someProc(?,?)','ss',array('param1','param2'));
?>
And this is the code to make it happen:
(I extracted this example from a bigger context, but you probably get the idea)
<?php
class myDb extends mysqli {
public function __construct() {
//Connection established here
}
public function execProcedure($call,$types,$params) {
$stmt = $this->prepare($call);
$bind_names[] = $types;
for ($i=0; $i<count($params);$i++) {
$bind_name = 'bind' . $i;
$$bind_name = $params[$i];
$bind_names[] = &$$bind_name;
}
$return = call_user_func_array(array($stmt,'bind_param'),$bind_names);
$stmt->execute();
$stmt->close();
}
}
bodek at ipsit dot bu dot edu ¶
3 years ago
Guido's class above is great ... but to avoid a warning for an unknown array key 0, you should replace:
$this->mbind_params = array();
with
$this->mbind_params = array("");
on two of the lines.
alex dot deleyn at gmail dot com ¶
13 years ago
MySQL has a "NULL-safe equal" operator (I'm guessing since 5.0)
http://dev.mysql.com/doc/refman/5.0/en/comparison-operators.html#operator_equal-to
If you use this operator instead of the usual = you can interchange values and null in where clauses.
There is however a known bug when using this operator with datetime or timestamp fields: http://bugs.mysql.com/bug.php?id=36100
Anonymous ¶
17 years ago
It's worth noting that you have to bind all parameters in one fell swoop - you can't go through and call bind_param once for each.
Mark Reddin ¶
14 years ago
Miguel Hatrick's Statement_Parameter class, as posted in these notes, allows for a relatively painless way of writing secure dynamic SQL. It is secure against SQL injection because we still use bind parameters for any content coming from the user.
For example, the following code constructs an insert statement, but looks at which query string (GET) parameters are present in order to figure out which columns should be included. The ParameterManager.php file is simply Miguel's classes as posted in this discussion.
<?php
require_once("dbConnectionParams.php");
require_once("ParameterManager.php");
$sp = new Statement_Parameter();
$column_list = "";
$value_list = "";
if (isset ($_GET['name']) ) {
$column_list = $column_list . "name,";
$value_list = $value_list . "?,";
$sp->Add_Parameter('name', Statement_Parameter_Type::$STATEMENT_TYPE_STRING);
$sp->Set_Parameter('name',$_GET['name']);
}
if (isset($_GET['address']) ) {
$column_list = $column_list . "address,";
$value_list = $value_list . "?,";
$sp->Add_Parameter('address', Statement_Parameter_Type::$STATEMENT_TYPE_STRING);
$sp->Set_Parameter('address',$_GET['address']);
}
//tidy up column list and value list - the code above will always leave them ending in a comma, which we remove now
$column_list = substr($column_list, 0, strlen($column_list) -1);
$value_list = substr($value_list, 0, strlen($value_list) -1);
$sql = "insert into test_table (" . $column_list . ") values (" . $value_list . ");";
echo $sql;
$mysqli = @new mysqli($host,$user,$password,$database);
$stmt = $mysqli->prepare($sql);
$sp->Bind_Params($stmt);
if($stmt->execute() === TRUE)
{
/*** assign the last insert id ***/
$last_id = $mysqli->insert_id;
echo "OK$last_id";
}
else {
echo $mysqli->error;
}
?>
