IntlCalendar::FIELD_ERA
-
Calendar field numerically representing an era, for instance
1 for AD and 0 for BC in the
Gregorian/Julian calendars and 235 for the Heisei
(平成) era in the Japanese calendar. Not all calendars have more than
one era.
IntlCalendar::FIELD_YEAR
-
Calendar field for the year. This is not unique across eras. If the
calendar type has more than one era, generally the minimum value for
this field will be 1.
IntlCalendar::FIELD_MONTH
-
Calendar field for the month. The month sequence is zero-based, so
Janurary (here used to signify the first month of the calendar; this
may be called another name, such as Muharram in the Islamic calendar)
is represented by 0, February by
1, …, December by 11 and, for
calendars that have it, the 13th or leap month by
12.
IntlCalendar::FIELD_WEEK_OF_YEAR
-
Calendar field for the number of the week of the year. This depends on
which day of the week is deemed to start the
week and the minimal number of days
in a week.
IntlCalendar::FIELD_WEEK_OF_MONTH
-
Calendar field for the number of the week of the month. This depends on
which day of the week is deemed to start the
week and the minimal number of days
in a week.
IntlCalendar::FIELD_DATE
-
Calendar field for the day of the month. The same as
IntlCalendar::FIELD_DAY_OF_MONTH
, which has a
clearer name.
IntlCalendar::FIELD_DAY_OF_YEAR
-
Calendar field for the day of the year. For the Gregorian calendar,
starts with 1
and ends with
365
or 366
.
IntlCalendar::FIELD_DAY_OF_WEEK
-
Calendar field for the day of the week. Its values start with
1 (Sunday, see IntlCalendar::DOW_SUNDAY
and subsequent constants) and the last valid value is 7 (Saturday).
IntlCalendar::FIELD_DAY_OF_WEEK_IN_MONTH
-
Given a day of the week (Sunday, Monday, …), this calendar
field assigns an ordinal to such a day of the week in a specific month.
Thus, if the value of this field is 1 and the value of the day of the
week is 2 (Monday), then the set day of the month is the 1st Monday of the
month; the maximum value is 5.
Additionally, the value 0 and negative values are
also allowed. The value 0 encompasses the seven days
that occur immediately before the first seven days of a month (which
therefore have a ‘day of week in month’ with value
1). Negative values starts counting from the end of
the month – -1 points to the last occurrence of a
day of the week in a month, -2 to the second last,
and so on.
Unlike IntlCalendar::FIELD_WEEK_OF_MONTH
and IntlCalendar::FIELD_WEEK_OF_YEAR
,
this value does not depend on
IntlCalendar::getFirstDayOfWeek() or on
IntlCalendar::getMinimalDaysInFirstWeek(). The first
Monday is the first Monday, even if it occurs in a week that belongs to
the previous month.
IntlCalendar::FIELD_AM_PM
-
Calendar field indicating whether a time is before noon (value
0, AM) or after (1). Midnight is
AM, noon is PM.
IntlCalendar::FIELD_HOUR
-
Calendar field for the hour, without specifying whether itʼs in the
morning or in the afternoon. Valid values are 0 to
11.
IntlCalendar::FIELD_HOUR_OF_DAY
-
Calendar field for the full (24h) hour of the day. Valid values are
0 to 23.
IntlCalendar::FIELD_MINUTE
-
Calendar field for the minutes component of the time.
IntlCalendar::FIELD_SECOND
-
Calendar field for the seconds component of the time.
IntlCalendar::FIELD_MILLISECOND
-
Calendar field the milliseconds component of the time.
IntlCalendar::FIELD_ZONE_OFFSET
-
Calendar field indicating the raw offset of the timezone, in
milliseconds. The raw offset is the timezone offset, excluding any
offset due to daylight saving time.
IntlCalendar::FIELD_DST_OFFSET
-
Calendar field for the daylight saving time offset of the calendarʼs
timezone, in milliseconds, if active for calendarʼs time.
IntlCalendar::FIELD_YEAR_WOY
-
Calendar field representing the year for week of year
purposes.
IntlCalendar::FIELD_DOW_LOCAL
-
Calendar field for the localized day of the week. This is a value
betwen 1 and 7,
1 being used for the day of the week that matches
the value returned by
IntlCalendar::getFirstDayOfWeek().
IntlCalendar::FIELD_EXTENDED_YEAR
-
Calendar field for a year number representation that is continuous
across eras. For the Gregorian calendar, the value of this field
matches that of IntlCalendar::FIELD_YEAR
for AD
years; a BC year y is represented by -y +
1.
IntlCalendar::FIELD_JULIAN_DAY
-
Calendar field for a modified Julian day number. It is different from a
conventional Julian day number in that its transitions occur at local
zone midnight rather than at noon UTC. It uniquely identifies a date.
IntlCalendar::FIELD_MILLISECONDS_IN_DAY
-
Calendar field encompassing the information in
IntlCalendar::FIELD_HOUR_OF_DAY
,
IntlCalendar::FIELD_MINUTE
,
IntlCalendar::FIELD_SECOND
and
IntlCalendar::FIELD_MILLISECOND
. Range is from the
0 to 24 * 3600 * 1000 - 1. It is
not the amount of milliseconds ellapsed in the day since on DST
transitions it will have discontinuities analog to those of the wall
time.
IntlCalendar::FIELD_IS_LEAP_MONTH
-
Calendar field whose value is 1 for indicating a
leap month and 0 otherwise.
IntlCalendar::FIELD_FIELD_COUNT
-
The total number of fields.
IntlCalendar::FIELD_DAY_OF_MONTH
-
Alias for IntlCalendar::FIELD_DATE
.
IntlCalendar::DOW_SUNDAY
-
Sunday.
IntlCalendar::DOW_MONDAY
-
Monday.
IntlCalendar::DOW_TUESDAY
-
Tuesday.
IntlCalendar::DOW_WEDNESDAY
-
Wednesday.
IntlCalendar::DOW_THURSDAY
-
Thursday.
IntlCalendar::DOW_FRIDAY
-
Friday.
IntlCalendar::DOW_SATURDAY
-
Saturday.
IntlCalendar::DOW_TYPE_WEEKDAY
-
Output of IntlCalendar::getDayOfWeekType()
indicating a day of week is a weekday.
IntlCalendar::DOW_TYPE_WEEKEND
-
Output of IntlCalendar::getDayOfWeekType()
indicating a day of week belongs to the weekend.
IntlCalendar::DOW_TYPE_WEEKEND_OFFSET
-
Output of IntlCalendar::getDayOfWeekType()
indicating the weekend begins during the given day of week.
IntlCalendar::DOW_TYPE_WEEKEND_CEASE
-
Output of IntlCalendar::getDayOfWeekType()
indicating the weekend ends during the given day of week.
IntlCalendar::WALLTIME_FIRST
-
Output of IntlCalendar::getSkippedWallTimeOption()
indicating that wall times in the skipped range should refer to the
same instant as wall times with one hour less and of
IntlCalendar::getRepeatedWallTimeOption()
indicating the wall times in the repeated range should refer to the
instant of the first occurrence of such wall time.
IntlCalendar::WALLTIME_LAST
-
Output of IntlCalendar::getSkippedWallTimeOption()
indicating that wall times in the skipped range should refer to the
same instant as wall times with one hour after and of
IntlCalendar::getRepeatedWallTimeOption()
indicating the wall times in the repeated range should refer to the
instant of the second occurrence of such wall time.
IntlCalendar::WALLTIME_NEXT_VALID
-
Output of IntlCalendar::getSkippedWallTimeOption()
indicating that wall times in the skipped range should refer to the
instant when the daylight saving time transition occurs (begins).