It appears that you can't have table.field names in the resulting array.
Just use an alias if your results come up empty and you are using multi-table query's:
$res=mysql_query("SELECT user.ID AS uID, order.ID AS oID FROM user, order WHERE ( order.userid=uID )";
while ($row=mysql_fetch_assoc($res)) {
echo "<p>userid: $row['uID'], orderid: $row['oID']</p>";
}
mysql_fetch_assoc
(PHP 4 >= 4.0.3, PHP 5)
mysql_fetch_assoc — 연관 배열로 결과 행을 반환
설명
array mysql_fetch_assoc
( resource
$result
)인출된 행을 연관 배열로 반환하고, 내부 데이터 포인터 바로 앞으로 이동한다. mysql_fetch_assoc()은 두번째 선택 인수로 MYSQL_ASSOC를 이용하여 mysql_fetch_array()를 호출하는 것과 동일하다. 이 함수는 연관 배열만을 반환한다.
반환값
인출된 행에서 문자열의 연관 배열을 반환하거나 더 이상의 행이 없다면 FALSE를 반환한다.
동일한 이름을 포함하는 둘 또는 그 이상의 컬럼들은 마지막 컬럼이 우선권을 가질 것이다. 동일한 이름의 다른 컬럼에 접근하기 위해서는 mysql_fetch_row()를 사용하거나, 별명(alias)을 사용하면 된다. mysql_fetch_array()의 별명에 대한 설명은 예제를 참조하라.
예제
Example #1 mysql_fetch_assoc() 예제
<?php
$conn = mysql_connect("localhost", "mysql_user", "mysql_password");
if (!$conn) {
echo "Unable to connect to DB: " . mysql_error();
exit;
}
if (!mysql_select_db("mydbname")) {
echo "Unable to select mydbname: " . mysql_error();
exit;
}
$sql = "SELECT id as userid, fullname, userstatus
FROM sometable
WHERE userstatus = 1";
$result = mysql_query($sql);
if (!$result) {
echo "Could not successfully run query ($sql) from DB: " . mysql_error();
exit;
}
if (mysql_num_rows($result) == 0) {
echo "No rows found, nothing to print so am exiting";
exit;
}
// While a row of data exists, put that row in $row as an associative array
// Note: If you're expecting just one row, no need to use a loop
// Note: If you put extract($row); inside the following loop, you'll
// then create $userid, $fullname, and $userstatus
while ($row = mysql_fetch_assoc($result)) {
echo $row["userid"];
echo $row["fullname"];
echo $row["userstatus"];
}
mysql_free_result($result);
?>
주의
Note: 성능
mysql_fetch_assoc()는 mysql_fetch_row()보다 느려지지는 않는다.
Note: 이 함수가 반환하는 필드 이름은 대소문자를 구별합니다.
Note: 이 함수는 NULL 필드를 PHP
NULL값으로 설정합니다.
참고
- mysql_fetch_row() - 숫자 색인 배열로 결과를 반환
- mysql_fetch_array() - 연관 색인 및 숫자 색인으로 된 배열로 결과 행을 반환
- mysql_data_seek() - 내부 결과 포인터를 이동
- mysql_query() - MySQL 질의를 전송
- mysql_error() - 최근 실행된 MySQL 작업으로 발생한 에러 메시지를 반환
add a note
User Contributed Notes 15 notes
marREtijn dot posthMOuma at hoVEme dot nl ¶
21 years ago
joe at kybert dot com ¶
20 years ago
Worth pointing out that the internal row pointer is incremented once the data is collected for the current row.
This means that multiple calls will iterate through the row data, so you DONT need to mysql_data_seek(..) between calls.
This is noted in the mysql_fetch_row() docs, but not here!?
Typer85 at gmail dot com ¶
18 years ago
Please be advised that the resource result that you pass to this function can be thought of as being passed by reference because a resource is simply a pointer to a memory location.
Because of this, you can not loop through a resource result twice in the same script before resetting the pointer back to the start position.
For example:
----------------
<?php
// Assume We Already Queried Our Database.
// Loop Through Result Set.
while( $queryContent = mysql_fetch_row( $queryResult ) {
// Display.
echo $queryContent[ 0 ];
}
// We looped through the resource result already so the
// the pointer is no longer pointing at any rows.
// If we decide to loop through the same resource result
// again, the function will always return false because it
// will assume there are no more rows.
// So the following code, if executed after the previous code
// segment will not work.
while( $queryContent = mysql_fetch_row( $queryResult ) {
// Display.
echo $queryContent[ 0 ];
}
// Because $queryContent is now equal to FALSE, the loop
// will not be entered.
?>
----------------
The only solution to this is to reset the pointer to make it point at the first row again before the second code segment, so now the complete code will look as follows:
----------------
<?php
// Assume We Already Queried Our Database.
// Loop Through Result Set.
while( $queryContent = mysql_fetch_row( $queryResult ) {
// Display.
echo $queryContent[ 0 ];
}
// Reset Our Pointer.
mysql_data_seek( $queryResult );
// Loop Again.
while( $queryContent = mysql_fetch_row( $queryResult ) {
// Display.
echo $queryContent[ 0 ];
}
?>
----------------
Of course you would have to do extra checks to make sure that the number of rows in the result is not 0 or else mysql_data_seek itself will return false and an error will be raised.
Also please note that this applies to all functions that fetch result sets, including mysql_fetch_row, mysql_fetch_assos, and mysql_fetch_array.
george at georgefisher dot com ¶
15 years ago
Thanks to to R. Bradley for the implode idea. The following fixes a few bugs and includes quote_smart functionality (and has been tested)
<?php
function mysql_insert_assoc ($my_table, $my_array) {
//
// Insert values into a MySQL database
// Includes quote_smart code to foil SQL Injection
//
// A call to this function of:
//
// $val1 = "foobar";
// $val2 = 495;
// mysql_insert_assoc("tablename", array(col1=>$val1, col2=>$val2, col3=>"val3", col4=>720, col5=>834.987));
//
// Sends the following query:
// INSERT INTO 'tablename' (col1, col2, col3, col4, col5) values ('foobar', 495, 'val3', 720, 834.987)
//
global $db_link;
// Find all the keys (column names) from the array $my_array
$columns = array_keys($my_array);
// Find all the values from the array $my_array
$values = array_values($my_array);
// quote_smart the values
$values_number = count($values);
for ($i = 0; $i < $values_number; $i++)
{
$value = $values[$i];
if (get_magic_quotes_gpc()) { $value = stripslashes($value); }
if (!is_numeric($value)) { $value = "'" . mysql_real_escape_string($value, $db_link) . "'"; }
$values[$i] = $value;
}
// Compose the query
$sql = "INSERT INTO $my_table ";
// create comma-separated string of column names, enclosed in parentheses
$sql .= "(" . implode(", ", $columns) . ")";
$sql .= " values ";
// create comma-separated string of values, enclosed in parentheses
$sql .= "(" . implode(", ", $values) . ")";
$result = @mysql_query ($sql) OR die ("<br />\n<span style=\"color:red\">Query: $sql UNsuccessful :</span> " . mysql_error() . "\n<br />");
return ($result) ? true : false;
}
?>
jono ¶
18 years ago
Note that the field names quoted within $row[] are case sensitive whereas many sql commands are case insensitive.
Daniel Chcouri - 333222 +A-T+ gmail ¶
15 years ago
Fetching all the results to array with one liner:
<?php
$result = mysql_query(...);
while(($resultArray[] = mysql_fetch_assoc($result)) || array_pop($resultArray));
?>
benlanc at ster dot me dot uk ¶
19 years ago
It probably without saying, but using list() in conjunction with mysql_fetch_assoc() does not work - use mysql_fetch_row() instead.
<?php
$sql = "SELECT `id`,`field`,`value` FROM `table`";
$result = mysql_query($sql);
// this results in empty values for rowID,fieldName,myValue
list($rowID,$fieldName,$myValue) = mysql_fetch_assoc($result);
// this is what you want:
list($rowID,$fieldName,$myValue) = mysql_fetch_row($result);
?>
R. Bradley ¶
18 years ago
In response to Sergiu's function - implode() would make things a lot easier ... as below:
<?php
function mysql_insert_assoc ($my_table, $my_array) {
// Find all the keys (column names) from the array $my_array
$columns = array_keys($my_array);
// Find all the values from the array
$values = array_values($my_array);
// We compose the query
$sql = "insert into `$my_table` ";
// implode the column names, inserting "\", \"" between each (but not after the last one)
// we add the enclosing quotes at the same time
$sql .= "(\"" . implode("\", \"", $column_names) . "\")";
$sql .= " values ";
// Same with the values
$sql .= "(" . implode(", ", $values) . ")";
$result = mysql_query($sql);
if ($result)
{
echo "The row was added sucessfully";
return true;
}
else
{
echo ("The row was not added<br>The error was" . mysql_error());
return false;
}
}
?>
Thus, a call to this function of:
mysql_insert_assoc("tablename", array("col1"=>"val1", "col2"=>"val2"));
Sends the following sql query to mysql:
INSERT INTO `tablename` ("col1", "col2") VALUES ("val1", "val2")
jo at durchholz dot org ¶
19 years ago
To sum up moverton at northshropshiredc dot gov dot uk and Olivier Fabre:
If the query is "SELECT something1, something2, .... FROM tbl WHERE some_condition", the keys in the returned array will be 'something1', 'something2', etc. *even for those "somethings" that are not just field names*.
Examples of non-fieldname "somethings" are:
NULL
NOW
MAX(some_fieldname)
I haven't tested whether this applies to table.fieldname, but I see no reason why it shouldn't (I'd suspect a typo in my code if I didn't get the expected results; I certainly have had my share of them!)
I found it most convenient to check for typos by simply var_dumping the resulting row, like this:
<?php
echo '<pre>Got this row:'
var_dump ($row);
echo '</pre>';
?>
where $row is the result from the last call to mysql_fetch_assoc.
erik[at]phpcastle.com ¶
19 years ago
When you have to loop multiple times through the result of a query you can set the result pointer to 0 (zero) with mysql_data_seek ()
The advantage is that you do not have to query database twice with te same query :)
So:
<?php
$query = "
SELECT *
FROM database
";
//Query database
$result = mysql_query ($query);
//Iterate result
while ($record = mysql_fetch_assoc ($result)){
print_r ($record);
}
...
//Point to 0 (zero)
mysql_data_seek ($result, 0);
//Re-use the result
while ($record = mysql_fetch_assoc ($result)){
print_r ($record);
}
?>
chasfileDELETE_ALL_CAPS at gmail dot com ¶
18 years ago
What if you *want* a two dimensional array? Useful for output as an HTML table, for instance.
function mysql_resultTo2DAssocArray ( $result) {
$i=0;
$ret = array();
while ($row = mysql_fetch_assoc($result)) {
foreach ($row as $key => $value) {
$ret[$i][$key] = $value;
}
$i++;
}
return ($ret);
}
print_r(mysql_resultTo2DAssocArray(mysql_query("SELECT * FROM something")));
Array ( [0] => Array ( [symbol] => ARNA
[datetime] => 2006-02-17 16:00:00
[price] => 16.83 )
[1] => Array ( [symbol] => CALP
[datetime] => 2006-02-17 16:00:00
[price] => 6.54 )
[2] => Array ( [symbol] => CROX
[datetime] => 2006-02-17 16:00:00
[price] => 27.4 ))
josh at joshstrike dot com ¶
15 years ago
Here's a nifty function to copy a whole table to another table. Takes as its arguments
$z -> the result of a SQL query with columns matching the table you're copying into.
$toTable -> string name of the table to copy into.
$link_identifier -> the db resource of the table you're copying into.
If anyone can find a faster way to do this, I'd be glad to know about it...
<?php
function mysql_multirow_copy($z,$toTable,$link_identifier) {
$fields = "";
for ($i=0;$i<mysql_num_fields($z);$i++) {
if ($i>0) {
$fields .= ",";
}
$fields .= mysql_field_name($z,$i);
}
$q = "INSERT INTO $toTable ($fields) VALUES";
$c = 0;
mysql_data_seek($z,0); //critical reset in case $z has been parsed beforehand. !
while ($a = mysql_fetch_assoc($z)) {
foreach ($a as $as) {
$a[key($a)] = addslashes($as);
next ($a);
}
if ($c>0) {
$q .= ",";
}
$q .= "('".implode(array_values($a),"','")."')";
$c++;
}
$q .= ";";
$z = mysql_query($q,$link_identifier);
return ($q);
}
?>
nick at homefeedback dot com ¶
17 years ago
function array2table: small fix to the post below that handles data returned from mysql that is either null or 0...
This is a useful script for displaying MySQL results in an HTML table.
<?
function array2table($arr,$width)
{
$count = count($arr);
if($count > 0){
reset($arr);
$num = count(current($arr));
echo "<table align=\"center\" border=\"1\"cellpadding=\"5\" cellspacing=\"0\" width=\"$width\">\n";
echo "<tr>\n";
foreach(current($arr) as $key => $value){
echo "<th>";
echo $key." ";
echo "</th>\n";
}
echo "</tr>\n";
while ($curr_row = current($arr)) {
echo "<tr>\n";
$col = 1;
while (false !== ($curr_field = current($curr_row))) {
echo "<td>";
echo $curr_field." ";
echo "</td>\n";
next($curr_row);
$col++;
}
while($col <= $num){
echo "<td> </td>\n";
$col++;
}
echo "</tr>\n";
next($arr);
}
echo "</table>\n";
}
}
?>
<?
// Add DB connection script here
$query = "SELECT * FROM mytable";
$result = mysql_query($query);
while($row = mysql_fetch_assoc($result)){
$array[] = $row; }
array2table($array,600); // Will output a table of 600px width
?>
moverton at northshropshiredc dot gov dot uk ¶
20 years ago
Actually, Olivier, you're completely wrong about that, because there's a bug in your sample code. It will indeed return $row['MAX(time)'] - you have to pass the MySQL resource to mysql_fetch_assoc() and you're not doing that. This:
$row = mysql_fetch_assoc($conn)
...where $conn is your DB connection, would in fact produce a result. The complete example below is taken from my own self-written content management system:
$query = 'SELECT MAX(ctRevDate) FROM content group by ctPage';
$querySet = mysql_query($query, $conn);
$row = mysql_fetch_assoc($querySet);
print_r($row);
This produces:
Array
(
[MAX(ctRevDate)] => 2004-01-15
)
..on my testbed. So it doesn't in fact need an alias at all.
bkfake-php at yahoo dot com ¶
10 years ago
Although deprecated as of PHP 5.5, the mySQL function do NOT trigger an E_DEPRECATED error
