For getting a substring of UTF-8 characters, I highly recommend mb_substr
<?php
$utf8string = "cakeæøå";
echo substr($utf8string,0,5);
// output cake#
echo mb_substr($utf8string,0,5,'UTF-8');
//output cakeæ
?>
(PHP 4, PHP 5, PHP 7)
substr — Return part of a string
$string
, int $start
[, int $length
] )
Returns the portion of string
specified by the
start
and length
parameters.
string
The input string. Must be one character or longer.
start
If start
is non-negative, the returned string
will start at the start
'th position in
string
, counting from zero. For instance,
in the string 'abcdef', the character at
position 0 is 'a', the
character at position 2 is
'c', and so forth.
If start
is negative, the returned string
will start at the start
'th character
from the end of string
.
If string
is less than
start
characters long, FALSE
will be returned.
Example #1 Using a negative start
<?php
$rest = substr("abcdef", -1); // returns "f"
$rest = substr("abcdef", -2); // returns "ef"
$rest = substr("abcdef", -3, 1); // returns "d"
?>
length
If length
is given and is positive, the string
returned will contain at most length
characters
beginning from start
(depending on the length of
string
).
If length
is given and is negative, then that many
characters will be omitted from the end of string
(after the start position has been calculated when a
start
is negative). If
start
denotes the position of this truncation or
beyond, FALSE
will be returned.
If length
is given and is 0,
FALSE
or NULL
, an empty string will be returned.
If length
is omitted, the substring starting from
start
until the end of the string will be
returned.
Example #2 Using a negative length
<?php
$rest = substr("abcdef", 0, -1); // returns "abcde"
$rest = substr("abcdef", 2, -1); // returns "cde"
$rest = substr("abcdef", 4, -4); // returns false
$rest = substr("abcdef", -3, -1); // returns "de"
?>
Returns the extracted part of string
; 실패 시 FALSE
를 반환합니다, or
an empty string.
버전 | 설명 |
---|---|
7.0.0 |
If string is equal to
start characters long, an empty string will be
returned. Prior to this version, FALSE was returned in this case.
|
5.2.2 - 5.2.6 |
If the start parameter indicates the position of
a negative truncation or beyond, false is returned. Other versions get
the string from start.
|
Example #3 Basic substr() usage
<?php
echo substr('abcdef', 1); // bcdef
echo substr('abcdef', 1, 3); // bcd
echo substr('abcdef', 0, 4); // abcd
echo substr('abcdef', 0, 8); // abcdef
echo substr('abcdef', -1, 1); // f
// Accessing single characters in a string
// can also be achieved using "square brackets"
$string = 'abcdef';
echo $string[0]; // a
echo $string[3]; // d
echo $string[strlen($string)-1]; // f
?>
Example #4 substr() casting behaviour
<?php
class apple {
public function __toString() {
return "green";
}
}
echo "1) ".var_export(substr("pear", 0, 2), true).PHP_EOL;
echo "2) ".var_export(substr(54321, 0, 2), true).PHP_EOL;
echo "3) ".var_export(substr(new apple(), 0, 2), true).PHP_EOL;
echo "4) ".var_export(substr(true, 0, 1), true).PHP_EOL;
echo "5) ".var_export(substr(false, 0, 1), true).PHP_EOL;
echo "6) ".var_export(substr("", 0, 1), true).PHP_EOL;
echo "7) ".var_export(substr(1.2e3, 0, 4), true).PHP_EOL;
?>
Output of the above example in PHP 7:
1) 'pe' 2) '54' 3) 'gr' 4) '1' 5) '' 6) '' 7) '1200'
Output of the above example in PHP 5:
1) 'pe' 2) '54' 3) 'gr' 4) '1' 5) false 6) false 7) '1200'
Returns FALSE
on error.
<?php
var_dump(substr('a', 2)); // bool(false)
?>
For getting a substring of UTF-8 characters, I highly recommend mb_substr
<?php
$utf8string = "cakeæøå";
echo substr($utf8string,0,5);
// output cake#
echo mb_substr($utf8string,0,5,'UTF-8');
//output cakeæ
?>
may be by following functions will be easier to extract the needed sub parts from a string:
<?php
after ('@', 'biohazard@online.ge');
//returns 'online.ge'
//from the first occurrence of '@'
before ('@', 'biohazard@online.ge');
//returns 'biohazard'
//from the first occurrence of '@'
between ('@', '.', 'biohazard@online.ge');
//returns 'online'
//from the first occurrence of '@'
after_last ('[', 'sin[90]*cos[180]');
//returns '180]'
//from the last occurrence of '['
before_last ('[', 'sin[90]*cos[180]');
//returns 'sin[90]*cos['
//from the last occurrence of '['
between_last ('[', ']', 'sin[90]*cos[180]');
//returns '180'
//from the last occurrence of '['
?>
here comes the source:
<?php
function after ($this, $inthat)
{
if (!is_bool(strpos($inthat, $this)))
return substr($inthat, strpos($inthat,$this)+strlen($this));
};
function after_last ($this, $inthat)
{
if (!is_bool(strrevpos($inthat, $this)))
return substr($inthat, strrevpos($inthat, $this)+strlen($this));
};
function before ($this, $inthat)
{
return substr($inthat, 0, strpos($inthat, $this));
};
function before_last ($this, $inthat)
{
return substr($inthat, 0, strrevpos($inthat, $this));
};
function between ($this, $that, $inthat)
{
return before ($that, after($this, $inthat));
};
function between_last ($this, $that, $inthat)
{
return after_last($this, before_last($that, $inthat));
};
// use strrevpos function in case your php version does not include it
function strrevpos($instr, $needle)
{
$rev_pos = strpos (strrev($instr), strrev($needle));
if ($rev_pos===false) return false;
else return strlen($instr) - $rev_pos - strlen($needle);
};
?>
Be aware of a slight inconsistency between substr and mb_substr
mb_substr("", 4); returns empty string
substr("", 4); returns boolean false
tested in PHP 7.1.11 (Fedora 26) and PHP 5.4.16 (CentOS 7.4)
<?Php
### SUB STRING BY WORD USING substr() and strpos() #####
### THIS SCRIPT WILL RETURN PART OF STRING WITHOUT WORD BREAK ###
$description = ‘your description here your description here your description here your description here your description here your description here your description hereyour description here your description here’ // your description here .
$no_letter = 30 ;
if(strlen($desctiption) > 30 )
{
echo substr($description,0,strpos($description,’ ‘,30)); //strpos to find ‘ ‘ after 30 characters.
}
else {
echo $description;
}
?>
Coming to PHP from classic ASP I am used to the Left() and Right() functions built into ASP so I did a quick PHPversion. hope these help someone else making the switch
function left($str, $length) {
return substr($str, 0, $length);
}
function right($str, $length) {
return substr($str, -$length);
}
If you want to have a string BETWEEN two strings, just use this function:
<?php
function get_between($input, $start, $end)
{
$substr = substr($input, strlen($start)+strpos($input, $start), (strlen($input) - strpos($input, $end))*(-1));
return $substr;
}
//Example:
$string = "123456789";
$a = "12";
$b = "9";
echo get_between($string, $a, $b);
//Output:
//345678
?>
This returns the portion of str specified by the start and length parameters..
It can performs multi-byte safe on number of characters. like mb_strcut() ...
Note:
1.Use it like this bite_str(string str, int start, int length [,byte of on string]);
2.First character's position is 0. Second character position is 1, and so on...
3.$byte is one character length of your encoding, For example: utf-8 is "3", gb2312 and big5 is "2"...you can use the function strlen() get it...
Enjoy it :) ...
--- Bleakwind
QQ:940641
http://www.weaverdream.com
PS:I'm sorry my english is too poor... :(
<?php
// String intercept By Bleakwind
// utf-8:$byte=3 | gb2312:$byte=2 | big5:$byte=2
function bite_str($string, $start, $len, $byte=3)
{
$str = "";
$count = 0;
$str_len = strlen($string);
for ($i=0; $i<$str_len; $i++) {
if (($count+1-$start)>$len) {
$str .= "...";
break;
} elseif ((ord(substr($string,$i,1)) <= 128) && ($count < $start)) {
$count++;
} elseif ((ord(substr($string,$i,1)) > 128) && ($count < $start)) {
$count = $count+2;
$i = $i+$byte-1;
} elseif ((ord(substr($string,$i,1)) <= 128) && ($count >= $start)) {
$str .= substr($string,$i,1);
$count++;
} elseif ((ord(substr($string,$i,1)) > 128) && ($count >= $start)) {
$str .= substr($string,$i,$byte);
$count = $count+2;
$i = $i+$byte-1;
}
}
return $str;
}
// Test
$str = "123456???ֽ?123456?ַ???123456??ȡ????";
for($i=0;$i<30;$i++){
echo "<br>".bite_str($str,$i,20);
}
?>
[English]
I created python similar accesing list or string with php substr & strrev functions.
Use: str($string,$pattern)
About the python pattern,
http://docs.python.org/release/1.5.1p1/tut/strings.html
http://effbot.org/zone/python-list.htm
About of pattern structures
[start:stop:step]
Example,
<?php
$s = "fatihmertdogancan";
echo str($s,"1:9:-2");
echo "<br/>";
echo str($s,"1:-3:-2");
echo "<br/>";
echo str($s,"1:-11:-5");
echo "<br/>";
echo str($s,"1:9:4");
?>
Output,
thetoacn
eht
aom
htan
This is function phpfiddle link: http://phpfiddle.org/main/code/e82-y5d
or source;
<?php
function str($str,$pattern){
//[start:stop:step]
//pattern -> ([-]?[0-9]*|\s):([-]?[0-9]*|\s):([-]?[0-9]*|\s)
preg_match("/([-]?[0-9]*|\s?):([-]?[0-9]*|\s?):?([-]?[0-9]*|\s?)/", $pattern, $yakala);
$start = $yakala[1];
$stop = $yakala[2];
$step = $yakala[3];
if(empty($start) && empty($stop) && $step == "-1"){//istisna durum
return strrev($str);
}else if(empty($start) && empty($stop) && isset($step)){//istisna durum
$rev = "";
$yeni = "";
if($step[0] == "-" && $stop != "-1"){$rev = "VAR";}
$atla = abs($step);
for($i = 0; $i <= strlen($str); $i++){
$offset = $i*$atla;
if(isset($str[$offset])){
$yeni = $yeni.$str[$offset];
}
}
if($rev != "VAR"){
return substr($yeni,0,strlen($str)-1);
//"hepsi boş, step dolu o da +";
}else{
return strrev(substr($yeni,0,strlen($str)-1));
//"hepsi boş, step dolu o da -";
}
}
if(empty($start) && empty($stop) && empty($step)){
return $str;
//"hepsi boş";
}else if(empty($start)){
if(isset($stop) && empty($step)){
$rev = "";
if($stop[0] == "-"){$rev = "VAR";}
if($rev != "VAR"){
return substr($str,0,$stop);
//"start ve step boş, stop dolu"
}else{
return strrev(substr($str,0,$stop));
//"start ve step boş, stop -1";
}
}else if(isset($stop) && isset($step)){
$rev = "";
if($stop[0] == "-"){$rev = "VAR";}
$yeni = "";
if($step == 1){
if($rev != "VAR"){
return $str;
//"start boş, stop ve step dolu, step 1";
}else{
return strrev(substr($str,0,abs($stop))); //abs -> mutlak değer (-5 = 5)
//"start boş, stop -, step dolu, step 1";
}
}else{
$atla = abs($step);
for($i = 0; $i <= strlen($str); $i++){
$offset = $i*$atla;
if(isset($str[$offset])){
$yeni = $yeni.$str[$offset];
}
}
if($rev != "VAR"){
return substr($yeni,0,$stop);
//"start boş, step ve stop dolu";
}else{
return strrev(substr($yeni,0,abs($stop)));
//"start boş, step ve stop -";
}
}
}
//start boş değilse
}else if(!empty($start)){
if(isset($stop) && empty($step)){
$rev = "";
if($stop[0] == "-"){$rev = "VAR";}
if($rev != "VAR"){
return substr($str,$start,$stop);
//return "step boş, start ve stop dolu";
}else{
return strrev(substr($str,0,abs($stop)));
//"step boş, start ve stop dolu, stop -";
}
}else if(isset($stop) && isset($step)){
//hepsi dolu
$rev = "";
if($stop[0] == "-"){$rev = "VAR";}
$yeni = "";
if($step == 1){
if($rev != "VAR"){
return substr($str,$start,$stop);
//"hepsi dolu, step 1";
}else{
return substr($str,$start,abs($stop));
//"hepsi dolu, step 1, stop -";
}
}else{
if($stop[0] == "-"){$rev = "VAR";}
$atla = abs($step);
for($i = 0; $i <= strlen($str); $i++){
$offset = $i*$atla;
if(isset($str[$offset])){
$yeni = $yeni.$str[$offset];
}
}
if($rev != "VAR"){
return substr($yeni,$start,$stop);
//"hepsi dolu";
}else{
return strrev(substr($yeni,$start,abs($stop)));
//"hepsi dolu, stop -";
}
}
}
}
}
?>
Good works..
Drop extensions of a file (even from a file location string)
<?php
$filename = "c:/some dir/abc defg. hi.jklmn";
echo substr($filename, 0, (strlen ($filename)) - (strlen (strrchr($filename,'.'))));
?>
output: c:/some dir/abc defg. hi
Hope it may help somebody like me.. (^_^)
I wanted to work out the fastest way to get the first few characters from a string, so I ran the following experiment to compare substr, direct string access and strstr:
<?php
/* substr access */
beginTimer();
for ($i = 0; $i < 1500000; $i++){
$opening = substr($string,0,11);
if ($opening == 'Lorem ipsum'){
true;
}else{
false;
}
}
$endtime1 = endTimer();
/* direct access */
beginTimer();
for ($i = 0; $i < 1500000; $i++){
if ($string[0] == 'L' && $string[1] == 'o' && $string[2] == 'r' && $string[3] == 'e' && $string[4] == 'm' && $string[5] == ' ' && $string[6] == 'i' && $string[7] == 'p' && $string[8] == 's' && $string[9] == 'u' && $string[10] == 'm'){
true;
}else{
false;
}
}
$endtime2 = endTimer();
/* strstr access */
beginTimer();
for ($i = 0; $i < 1500000; $i++){
$opening = strstr($string,'Lorem ipsum');
if ($opening == true){
true;
}else{
false;
}
}
$endtime3 = endTimer();
echo $endtime1."\r\n".$endtime2."\r\n".$endtime3;
?>
The string was 6 paragraphs of Lorem Ipsum, and I was trying match the first two words. The experiment was run 3 times and averaged. The results were:
(substr) 3.24
(direct access) 11.49
(strstr) 4.96
(With standard deviations 0.01, 0.02 and 0.04)
THEREFORE substr is the fastest of the three methods for getting the first few letters of a string.
I created some functions for entity-safe splitting+lengthcounting:
<?php
function strlen_entities($text)
{
preg_match_all(
'/((?:&(?:#[0-9]{2,}|[a-z]{2,});)|(?:[^&])|'.
'(?:&(?!\w;)))s',$text,$textarray);
return count($textarray[0]);
}
function substr_entities($text,$start,$limit=0)
{
$return = '';
preg_match_all(
'/((?:&(?:#[0-9]{2,}|[a-z]{2,});)|(?:[^&])|'.
'(?:&(?!\w;)))s',$text,$textarray);
$textarray = $textarray[0];
$numchars = count($textarray)-1;
if ($start>=$numchars)
return false;
if ($start<0)
{
$start = ($numchars)+$start+1;
}
if ($start>=0)
{
if ($limit==0)
{
$end=$numchars;
}
elseif ($limit>0)
{
$end = $start+($limit-1);
}
else
{
$end = ($numchars)+$limit;
}
for ($i=$start;$i<=$end;$i++)
{
$return .= $textarray[$i];
}
return $return;
}
}
?>
Using a 0 as the last parameter for substr().
As per examples
<?php $var = substr($var, 4); ?>
works no problem. However
<?php $var = substr($var, 4, 0); ?>
will get you nothing. Just a quick heads up
Shortens the filename and its expansion has seen.
<?php
$file = "Hellothisfilehasmorethan30charactersandthisfayl.exe";
function funclongwords($file)
{
if (strlen($file) > 30)
{
$vartypesf = strrchr($file,".");
$vartypesf_len = strlen($vartypesf);
$word_l_w = substr($file,0,15);
$word_r_w = substr($file,-15);
$word_r_a = substr($word_r_w,0,-$vartypesf_len);
return $word_l_w."...".$word_r_a.$vartypesf;
}
else
return $file;
}
// RETURN: Hellothisfileha...andthisfayl.exe
?>
Hmm ... this is a script I wrote, whitch is very similar to substr, but it isn't takes html and bbcode for counting and it takes portion of string and show avoided (html & bbcode) tags too ;]
Specially usefull for show part of serach result included html and bbcode tags
<?php
/**
* string csubstr ( string string, int start [, int length] )
*
* @author FanFataL
* @param string string
* @param int start
* @param [int length]
* @return string
*/
function csubstr($string, $start, $length=false) {
$pattern = '/(\[\w+[^\]]*?\]|\[\/\w+\]|<\w+[^>]*?>|<\/\w+>)/i';
$clean = preg_replace($pattern, chr(1), $string);
if(!$length)
$str = substr($clean, $start);
else {
$str = substr($clean, $start, $length);
$str = substr($clean, $start, $length + substr_count($str, chr(1)));
}
$pattern = str_replace(chr(1),'(.*?)',preg_quote($str));
if(preg_match('/'.$pattern.'/is', $string, $matched))
return $matched[0];
return $string;
}
?>
Using this is similar to simple substr.
Greatings ;]
...
Anyone coming from the Python world will be accustomed to making substrings by using a "slice index" on a string. The following function emulates basic Python string slice behavior. (A more elaborate version could be made to support array input as well as string, and the optional third "step" argument.)
<?php
function py_slice($input, $slice) {
$arg = explode(':', $slice);
$start = intval($arg[0]);
if ($start < 0) {
$start += strlen($input);
}
if (count($arg) === 1) {
return substr($input, $start, 1);
}
if (trim($arg[1]) === '') {
return substr($input, $start);
}
$end = intval($arg[1]);
if ($end < 0) {
$end += strlen($input);
}
return substr($input, $start, $end - $start);
}
print py_slice('abcdefg', '2') . "\n";
print py_slice('abcdefg', '2:4') . "\n";
print py_slice('abcdefg', '2:') . "\n";
print py_slice('abcdefg', ':4') . "\n";
print py_slice('abcdefg', ':-3') . "\n";
print py_slice('abcdefg', '-3:') . "\n";
?>
The $slice parameter can be a single character index, or a range separated by a colon. The start of the range is inclusive and the end is exclusive, which may be counterintuitive. (Eg, py_slice('abcdefg', '2:4') yields 'cd' not 'cde'). A negative range value means to count from the end of the string instead of the beginning. Both the start and end of the range may be omitted; the start defaults to 0 and the end defaults to the total length of the input.
The output from the examples:
c
cd
cdefg
abcd
abcd
efg
<?php
/**
* string substrpos(string $str, mixed $start [[, mixed $end], boolean $ignore_case])
*
* If $start is a string, substrpos will return the string from the position of the first occuring $start to $end
*
* If $end is a string, substrpos will return the string from $start to the position of the first occuring $end
*
* If the first character in (string) $start or (string) $end is '-', the last occuring string will be used.
*
* If $ignore_case is true, substrpos will not care about the case.
* If $ignore_case is false (or anything that is not (boolean) true, the function will be case sensitive.
* Both of the above: only applies if either $start or $end are strings.
*
* echo substrpos('This is a string with 0123456789 numbers in it.', 5, '5');
* // Prints 'is a string with 01234';
*
* echo substrpos('This is a string with 0123456789 numbers in it.', '5', 5);
* // Prints '56789'
*
* echo substrpos('This is a string with 0123456789 numbers in it and two strings.', -60, '-string')
* // Prints 's is a string with 0123456789 numbers in it and two '
*
* echo substrpos('This is a string with 0123456789 numbers in it and two strings.', -60, '-STRING', true)
* // Prints 's is a string with 0123456789 numbers in it and two '
*
* echo substrpos('This is a string with 0123456789 numbers in it and two strings.', -60, '-STRING', false)
* // Prints 's is a string with 0123456789 numbers in it and two strings.'
*
* Warnings:
* Since $start and $end both take either a string or an integer:
* If the character or string you are searching $str for is a number, pass it as a quoted string.
* If $end is (integer) 0, an empty string will be returned.
* Since this function takes negative strings ('-search_string'):
* If the string your using in $start or $end is a '-' or begins with a '-' escape it with a '\'.
* This only applies to the *first* character of $start or $end.
*/
// Define stripos() if not defined (PHP < 5).
if (!is_callable("stripos")) {
function stripos($str, $needle, $offset = 0) {
return strpos(strtolower($str), strtolower($needle), $offset);
}
}
function substrpos($str, $start, $end = false, $ignore_case = false) {
// Use variable functions
if ($ignore_case === true) {
$strpos = 'stripos'; // stripos() is included above in case it's not defined (PHP < 5).
} else {
$strpos = 'strpos';
}
// If end is false, set it to the length of $str
if ($end === false) {
$end = strlen($str);
}
// If $start is a string do what's needed to make it an integer position for substr().
if (is_string($start)) {
// If $start begins with '-' start processing until there's no more matches and use the last one found.
if ($start{0} == '-') {
// Strip off the '-'
$start = substr($start, 1);
$found = false;
$pos = 0;
while(($curr_pos = $strpos($str, $start, $pos)) !== false) {
$found = true;
$pos = $curr_pos + 1;
}
if ($found === false) {
$pos = false;
} else {
$pos -= 1;
}
} else {
// If $start begins with '\-', strip off the '\'.
if ($start{0} . $start{1} == '\-') {
$start = substr($start, 1);
}
$pos = $strpos($str, $start);
}
$start = $pos !== false ? $pos : 0;
}
// Chop the string from $start to strlen($str).
$str = substr($str, $start);
// If $end is a string, do exactly what was done to $start, above.
if (is_string($end)) {
if ($end{0} == '-') {
$end = substr($end, 1);
$found = false;
$pos = 0;
while(($curr_pos = strpos($str, $end, $pos)) !== false) {
$found = true;
$pos = $curr_pos + 1;
}
if ($found === false) {
$pos = false;
} else {
$pos -= 1;
}
} else {
if ($end{0} . $end{1} == '\-') {
$end = substr($end, 1);
}
$pos = $strpos($str, $end);
}
$end = $pos !== false ? $pos : strlen($str);
}
// Since $str has already been chopped at $start, we can pass 0 as the new $start for substr()
return substr($str, 0, $end);
}
?>
Here we have gr8 function which simply convert ip address to a number using substr with negative offset.
You can need it if you want to compare some IP addresses converted to a numbers.
For example when using ip2country, or eliminating same range of ip addresses from your website :D
<?php
function ip2no($val)
{
list($A,$B,$C,$D) = explode(".",$val);
return
substr("000".$A,-3).
substr("000".$B,-3).
substr("000".$C,-3).
substr("000".$D,-3);
}
$min = ip2no("10.11.1.0");
$max = ip2no("111.11.1.0");
$visitor = ip2no("105.1.20.200");
if($min<$visitor && $visitor<$max)
{ echo 'Welcome !'; }
else
{ echo 'Get out of here !'; }
?>
If you need to parse utf-8 strings char by char, try this one:
<?php
$utf8marker=chr(128);
$count=0;
while(isset($string{$count})){
if($string{$count}>=$utf8marker) {
$parsechar=substr($string,$count,2);
$count+=2;
} else {
$parsechar=$string{$count};
$count++;
}
/* do what you like with parsechar ... , eg.:*/ echo $parsechar."<BR>\r\n";
}
?>
- it works without mb_substr
- it is fast, because it grabs characters based on indexes when possible and avoids any count and split functions
I needed to cut a string after x chars at a html converted utf-8 text (for example Japanese text like 嬰謰弰脰欰罏).
The problem was, the different length of the signs, so I wrote the following function to handle that.
Perhaps it helps.
<?php
function html_cutstr ($str, $len)
{
if (!preg_match('/\&#[0-9]*;.*/i', $str))
{
$rVal = strlen($str, $len);
break;
}
$chars = 0;
$start = 0;
for($i=0; $i < strlen($str); $i++)
{
if ($chars >= $len)
break;
$str_tmp = substr($str, $start, $i-$start);
if (preg_match('/\&#[0-9]*;.*/i', $str_tmp))
{
$chars++;
$start = $i;
}
}
$rVal = substr($str, 0, $start);
if (strlen($str) > $start)
$rVal .= " ...";
return $rVal;
}
?>
When using a value of a wrong type as second parameter , substr() does not return FALSE but NULL although the docs say, it should return FALSE on error.
Prior to PHP 5.3, substr() tries to cast the second parameter to int and doesn't throw any errors. Since PHP 5.3 a warning is thrown.
I needed a function like lpad from oracle, or right from SQL
then I use this code :
<?php
function right($string,$chars)
{
$vright = substr($string, strlen($string)-$chars,$chars);
return $vright;
}
echo right('0r0j4152',4);
?>
Result:
4152
------------------------------------------------
This function is really simple, I just wanted to share, maybe helps someone out there.
regards,
Just a little function to cut a string by the wanted amount. Works in both directions.
<?php
function cutString($str, $amount = 1, $dir = "right")
{
if(($n = strlen($str)) > 0)
{
if($dir == "right")
{
$start = 0;
$end = $n-$amount;
} elseif( $dir == "left") {
$start = $amount;
$end = $n;
}
return substr($str, $start, $end);
} else return false;
}
?>
Enjoy ;)
<?php
//removes string from the end of other
function removeFromEnd($string, $stringToRemove) {
$stringToRemoveLen = strlen($stringToRemove);
$stringLen = strlen($string);
$pos = $stringLen - $stringToRemoveLen;
$out = substr($string, 0, $pos);
return $out;
}
$string = 'picture.jpg.jpg';
$string = removeFromEnd($string, '.jpg');
?>
Prior to PHP 8, specifying length with zero-length strings or non-string values as input can produce potentially unexpected results.
<?php
foreach (['normal', '', true, false, NULL] as $value) {
echo gettype(substr($value, 0, 10)) . ' ' . substr($value, 0, 10);
}
/*
string normal
boolean
string 1
boolean
boolean
*/
?>
You might expect substr('123456', 6) to return an empty string. Instead it returns boolean FALSE.
This behavior should be mentioned in the Return Values section of the manual. Instead it is only mentioned in the Parameters section.
If you need an empty string instead of a boolean FALSE you should typecast the result to a string.
<?php
$a = substr('123456', 6); // equivalent to $a = FALSE
$a = (string) substr('123456', 6); // equivalent to $a = '';
?>
To quickly trim an optional trailing slash off the end of a path name:
if (substr( $path, -1 ) == '/') $path = substr( $path, 0, -1 );
Add on to (a function originally written by) "Matias from Argentina": str_format_number function.
Just added handling of $String shorter then $Format by adding a side to start the fill and a string length to the while loop.
<?php
function str_format_number($String, $Format, $Start = 'left'){
//If we want to fill from right to left incase string is shorter then format
if ($Start == 'right') {
$String = strrev($String);
$Format = strrev($Format);
}
if($Format == '') return $String;
if($String == '') return $String;
$Result = '';
$FormatPos = 0;
$StringPos = 0;
while ((strlen($Format) - 1) >= $FormatPos && strlen($String) > $StringPos) {
//If its a number => stores it
if (is_numeric(substr($Format, $FormatPos, 1))) {
$Result .= substr($String, $StringPos, 1);
$StringPos++;
//If it is not a number => stores the caracter
} else {
$Result .= substr($Format, $FormatPos, 1);
}
//Next caracter at the mask.
$FormatPos++;
}
if ($Start == 'right') $Result = strrev($Result);
return $Result;
}
?>
Regarding the utf8_substr function from lmak: The pattern '/./u' doesn't match newline characters. This means that the substring from 0 to the total length of the string will miss the number of characters in the end matching the number of newlines in the string. To fix this one can add the s modifier (PCRE_DOTALL) in the pattern:
<?php
function utf8_substr($str,$start)
{
preg_match_all("/./su", $str, $ar);
if(func_num_args() >= 3) {
$end = func_get_arg(2);
return join("",array_slice($ar[0],$start,$end));
} else {
return join("",array_slice($ar[0],$start));
}
}
?>
And as always there is bound to be a bug:
<?php
function strlen_entities($text)
{
preg_match_all(
'/((?:&(?:#[0-9]{2,}|[a-z]{2,});)|(?:[^&])|'.
'(?:&(?!\w;)))s',$text,$textarray);
return count($textarray[0]);
}
function substr_entities($text,$start,$limit=0)
{
$return = '';
preg_match_all(
'/((?:&(?:#[0-9]{2,}|[a-z]{2,});)|(?:[^&])|'.
'(?:&(?!\w;)))s',$text,$textarray);
$textarray = $textarray[0];
$numchars = count($textarray)-1;
if ($start>=$numchars)
return false;
if ($start<0)
{
$start = ($numchars)+$start+1;
}
if ($start>=0)
{
if ($limit==0)
{
$end=$numchars;
}
elseif ($limit>0)
{
$end = $start+($limit-1);
}
else
{
$end = ($numchars)+$limit;
}
for ($i=$start;($i<=$end && isset($textarray[$i]));$i++)
{
$return .= $textarray[$i];
}
return $return;
}
}
?>
The javascript charAt equivalent in php of felipe has a little bug. It's necessary to compare the type (implicit) aswell or the function returns a wrong result:
<?php
function charAt($str,$pos) {
return (substr($str,$pos,1) !== false) ? substr($str,$pos,1) : -1;
}
?>
If you need just a single character from the string you don't need to use substr(), just use curly braces notation:
<?php
// both lines will output the 3rd character
echo substr($my_string, 2, 1);
echo $my_string{2};
?>
curly braces syntax is faster and more readable IMHO..
I have developed a function with a similar outcome to jay's
Checks if the last character is or isnt a space. (does it the normal way if it is)
It explodes the string into an array of seperate works, the effect is... it chops off anything after and including the last space.
<?php
function limit_string($string, $charlimit)
{
if(substr($string,$charlimit-1,1) != ' ')
{
$string = substr($string,'0',$charlimit);
$array = explode(' ',$string);
array_pop($array);
$new_string = implode(' ',$array);
return $new_string.'...';
}
else
{
return substr($string,'0',$charlimit-1).'...';
}
}
?>
Well this is a script I wrote, what it does is chop up long words with malicious meaning into several parts. This way, a chat in a table will not get stretched anymore.
<?php
function text($string,$limit=20,$chop=10){
$text = explode(" ",$string);
while(list($key, $value) = each($text)){
$length = strlen($value);
if($length >=20){
for($i=0;$i<=$length;$i+=10){
$new .= substr($value, $i, 10);
$new .= " ";
}
$post .= $new;
}
elseif($length <=15){
$post .= $value;
}
$post .= " ";
}
return($post);
}
// for example, this would return:
$output = text("Well this text doesn't get cut up, yet thisssssssssssssssssssssssss one does.", 10, 5);
echo($output); // "Well this text doesn't get cup up, yet thiss sssss sssss sssss sssss sss one does."
?>
I hope it was useful.. :)
Truncate a float number. Similar to the Excel trunc function.
<?php
function truncate_number($val,$decimals=2){
$number=array();
$number=explode(".",$val);
$result=0;
if (count($number)>1){
$result = $number[0] . "." . substr($number[1],0,$decimals);
} else {
$result = $val;
}
unset($number);
return $result;
}
echo truncate_number(99.123456,2); //result = 99.12
echo truncate_number(99.123456,5); //result = 99.12345
echo truncate_number(99.123456,1); //result = 99.1
?>
<?php
/**
* Returns and extracts the portion of string specified by the
* start and length parameters from the original string.
*
* This function is simulair to function substr() except that it
* removes the substring from the orignal string
* (passed by reference).
*
* @param string $string The input string.
* @param integer $start The start position (see substr() for
* explanation).
* @param integer $length The length (see substr()
* for explanation).
* @return mixed The substring or FALSE (see substr()
* for explanation).
**/
function substrex(&$string, $start, $length = PHP_INT_MAX)
{
if($start > strlen($string)) { return false; }
if(empty($length)) { return ''; }
if($start < 0) { $start = max(0, $start + strlen($string)); }
$end = ($length < 0) ?
strlen($string) + $length :
min(strlen($string), $start + $length);
if($end < $start) { return false; }
$length = $end - $start;
$substr = substr($string, $start, $length);
$string = substr($string, 0, $start).substr($string, $end);
return $substr;
}
?>
Shortcuts :
Getting the first character of a string
substr($string, 1)
Getting the last character of a string
substr($string, -1)
Remove the first character of a string
substr($string,1)
Remove the last character of a string
substr($string, 0, -1)