I think it's relevant to note that __clone is NOT an override. As the example shows, the normal cloning process always occurs, and it's the responsibility of the __clone method to "mend" any "wrong" action performed by it.
객체 복제
객체를 복사할때 프로퍼티까지 전부 복제하는것이 어떤경우에는 기대하는 동작이 아닐수 있습니다. 복사 생성자가 필요한 좋은 예를 들어보면, GTK 윈도를 나타내는 객체가 있고, 그 객체가 GTK 윈도의 리소스를 가지고 있는경우 복사를 할때 동일한 프로퍼티를 가지는 윈도우를 만들고 새 객체가 새 윈도우의 리소스를 보유하도록 하고 싶을수도 있습니다. 다른 예로 객체가 다른 객체의 참조를 가질경우, 부모 객체를 복제 할때 복제본이 독립적일수 있도록 해당 객체의 인스턴스를 새롭게 만들고 싶은 경우가 있습니다.
객체의 복사는 clone 키워드를 사용해서 할 수 있습니다(이 키워드는 객체의 __clone() 가 존재하는경우 해당 메서드를 호출합니다.) 객체의 __clone() 메서는 직접 호출 할 수 없습니다.
$copy_of_object = clone $object;
객체가 복제할때, PHP 5 는 객체의 프로퍼티들에 대해서 얕은 복사를 행합니다. 어떤 프로퍼티이든 다른 변수에대한 참조이며, 또한 참조로 유지 됩니다.
void __clone
( void
)
복제가 완료된후, __clone() 메서드가 정의되어 있으면, 새로 생성된 오브젝트의 __clone() 메서드가 호출될것이며, 이때 필요할 경우 프로퍼티에 대한 변경을 행할 수 있습니다.
Example #1 Cloning an object
<?php
class SubObject
{
static $instances = 0;
public $instance;
public function __construct() {
$this->instance = ++self::$instances;
}
public function __clone() {
$this->instance = ++self::$instances;
}
}
class MyCloneable
{
public $object1;
public $object2;
function __clone()
{
// Force a copy of this->object, otherwise
// it will point to same object.
$this->object1 = clone $this->object1;
}
}
$obj = new MyCloneable();
$obj->object1 = new SubObject();
$obj->object2 = new SubObject();
$obj2 = clone $obj;
print("Original Object:\n");
print_r($obj);
print("Cloned Object:\n");
print_r($obj2);
?>
위 예제의 출력:
Original Object:
MyCloneable Object
(
[object1] => SubObject Object
(
[instance] => 1
)
[object2] => SubObject Object
(
[instance] => 2
)
)
Cloned Object:
MyCloneable Object
(
[object1] => SubObject Object
(
[instance] => 3
)
[object2] => SubObject Object
(
[instance] => 2
)
)
add a note
User Contributed Notes 14 notes
jorge dot villalobos at gmail dot com ¶
19 years ago
jojor at gmx dot net ¶
14 years ago
Here is test script i wrote to test the behaviour of clone when i have arrays with primitive values in my class - as an additonal test of the note below by jeffrey at whinger dot nl
<pre>
<?php
class MyClass {
private $myArray = array();
function pushSomethingToArray($var) {
array_push($this->myArray, $var);
}
function getArray() {
return $this->myArray;
}
}
//push some values to the myArray of Mainclass
$myObj = new MyClass();
$myObj->pushSomethingToArray('blue');
$myObj->pushSomethingToArray('orange');
$myObjClone = clone $myObj;
$myObj->pushSomethingToArray('pink');
//testing
print_r($myObj->getArray()); //Array([0] => blue,[1] => orange,[2] => pink)
print_r($myObjClone->getArray());//Array([0] => blue,[1] => orange)
//so array cloned
?>
</pre>
MakariVerslund at gmail dot com ¶
17 years ago
I ran into the same problem of an array of objects inside of an object that I wanted to clone all pointing to the same objects. However, I agreed that serializing the data was not the answer. It was relatively simple, really:
public function __clone() {
foreach ($this->varName as &$a) {
foreach ($a as &$b) {
$b = clone $b;
}
}
}
Note, that I was working with a multi-dimensional array and I was not using the Key=>Value pair system, but basically, the point is that if you use foreach, you need to specify that the copied data is to be accessed by reference.
emile at webflow dot nl ¶
14 years ago
Another gotcha I encountered: like __construct and __desctruct, you must call parent::__clone() yourself from inside a child's __clone() function. The manual kind of got me on the wrong foot here: "An object's __clone() method cannot be called directly."
tolgakaragol at gmail dot com ¶
5 years ago
Here is a basic example about clone issue. If we use clone in getClassB method. Return value will be same as new B() result. But it we dont use clone we can effect B::$varA.
class A
{
protected $classB;
public function __construct(){
$this->classB = new B();
}
public function getClassB()
{
return clone $this->classB;
}
}
class B
{
protected $varA = 2;
public function getVarA()
{
return $this->varA;
}
public function setVarA()
{
$this->varA = 3;
}
}
$a = new A();
$classB = $a->getClassB();
$classB->setVarA();
echo $a->getClassB()->getVarA() . PHP_EOL;// with clone -> 2, without clone it returns -> 3
echo $classB->getVarA() . PHP_EOL; // returns always 3
ben at last dot fm ¶
15 years ago
Here are some cloning and reference gotchas we came up against at Last.fm.
1. PHP treats variables as either 'values types' or 'reference types', where the difference is supposed to be transparent. Object cloning is one of the few times when it can make a big difference. I know of no programmatic way to tell if a variable is intrinsically a value or reference type. There IS however a non-programmatic ways to tell if an object property is value or reference type:
<?php
class A { var $p; }
$a = new A;
$a->p = 'Hello'; // $a->p is a value type
var_dump($a);
/*
object(A)#1 (1) {
["p"]=>
string(5) "Hello" // <-- no &
}
*/
$ref =& $a->p; // note that this CONVERTS $a->p into a reference type!!
var_dump($a);
/*
object(A)#1 (1) {
["p"]=>
&string(5) "Hello" // <-- note the &, this indicates it's a reference.
}
*/
?>
2. unsetting all-but-one of the references will convert the remaining reference back into a value. Continuing from the previous example:
<?php
unset($ref);
var_dump($a);
/*
object(A)#1 (1) {
["p"]=>
string(5) "Hello"
}
*/
?>
I interpret this as the reference-count jumping from 2 straight to 0. However...
2. It IS possible to create a reference with a reference count of 1 - i.e. to convert an property from value type to reference type, without any extra references. All you have to do is declare that it refers to itself. This is HIGHLY idiosyncratic, but nevertheless it works. This leads to the observation that although the manual states that 'Any properties that are references to other variables, will remain references,' this is not strictly true. Any variables that are references, even to *themselves* (not necessarily to other variables), will be copied by reference rather than by value.
Here's an example to demonstrate:
<?php
class ByVal
{
var $prop;
}
class ByRef
{
var $prop;
function __construct() { $this->prop =& $this->prop; }
}
$a = new ByVal;
$a->prop = 1;
$b = clone $a;
$b->prop = 2; // $a->prop remains at 1
$a = new ByRef;
$a->prop = 1;
$b = clone $a;
$b->prop = 2; // $a->prop is now 2
?>
Hayley Watson ¶
16 years ago
It should go without saying that if you have circular references, where a property of object A refers to object B while a property of B refers to A (or more indirect loops than that), then you'll be glad that clone does NOT automatically make a deep copy!
<?php
class Foo
{
var $that;
function __clone()
{
$this->that = clone $this->that;
}
}
$a = new Foo;
$b = new Foo;
$a->that = $b;
$b->that = $a;
$c = clone $a;
echo 'What happened?';
var_dump($c);
stanislav dot eckert at vizson dot de ¶
9 years ago
This base class automatically clones attributes of type object or array values of type object recursively. Just inherit your own classes from this base class.
<?php
class clone_base
{
public function __clone()
{
$object_vars = get_object_vars($this);
foreach ($object_vars as $attr_name => $attr_value)
{
if (is_object($this->$attr_name))
{
$this->$attr_name = clone $this->$attr_name;
}
else if (is_array($this->$attr_name))
{
// Note: This copies only one dimension arrays
foreach ($this->$attr_name as &$attr_array_value)
{
if (is_object($attr_array_value))
{
$attr_array_value = clone $attr_array_value;
}
unset($attr_array_value);
}
}
}
}
}
?>
Example:
<?php
class foo extends clone_base
{
public $attr = "Hello";
public $b = null;
public $attr2 = array();
public function __construct()
{
$this->b = new bar("World");
$this->attr2[] = new bar("What's");
$this->attr2[] = new bar("up?");
}
}
class bar extends clone_base
{
public $attr;
public function __construct($attr_value)
{
$this->attr = $attr_value;
}
}
echo "<pre>";
$f1 = new foo();
$f2 = clone $f1;
$f2->attr = "James";
$f2->b->attr = "Bond";
$f2->attr2[0]->attr = "Agent";
$f2->attr2[1]->attr = "007";
echo "f1.attr = " . $f1->attr . "\n";
echo "f1.b.attr = " . $f1->b->attr . "\n";
echo "f1.attr2[0] = " . $f1->attr2[0]->attr . "\n";
echo "f1.attr2[1] = " . $f1->attr2[1]->attr . "\n";
echo "\n";
echo "f2.attr = " . $f2->attr . "\n";
echo "f2.b.attr = " . $f2->b->attr . "\n";
echo "f2.attr2[0] = " . $f2->attr2[0]->attr . "\n";
echo "f2.attr2[1] = " . $f2->attr2[1]->attr . "\n";
?>
fabio at naoimporta dot com ¶
8 years ago
It's possible to know how many clones have been created of a object. I'm think that is correct:
<?php
class Classe {
public static $howManyClones = 0;
public function __clone() {
++static::$howManyClones;
}
public static function howManyClones() {
return static::$howManyClones;
}
public function __destruct() {
--static::$howManyClones;
}
}
$a = new Classe;
$b = clone $a;
$c = clone $b;
$d = clone $c;
echo 'Clones:' . Classe::howManyClones() . PHP_EOL;
unset($d);
echo 'Clones:' . Classe::howManyClones() . PHP_EOL;
flaviu dot chelaru at gmail dot com ¶
6 years ago
<?php
class Foo
{
private $bar = 1;
public function get()
{
$x = clone $this;
return $x->bar;
}
}
// will NOT throw exception.
// Foo::$bar property is visible internally even if called as external on the clone
print (new Foo)->get();
yinzw at chuchujie dot com ¶
8 years ago
It's clearly depicted in the manual, about the mechanism of clone process:
- First, shallow copy: properties of references will keep references (refer to the same target/variable)
- Then, change content/property as requested (calling __clone method which is defined by user).
To illustrate this process, the following example codes seems better, comparing the the original version:
class SubObject
{
static $num_cons = 0;
static $num_clone = 0;
public $construct_value;
public $clone_value;
public function __construct() {
$this->construct_value = ++self::$num_cons;
}
public function __clone() {
$this->clone_value = ++self::$num_clone;
}
}
class MyCloneable
{
public $object1;
public $object2;
function __clone()
{
// 强制复制一份this->object， 否则仍然指向同一个对象
$this->object1 = clone $this->object1;
}
}
$obj = new MyCloneable();
$obj->object1 = new SubObject();
$obj->object2 = new SubObject();
$obj2 = clone $obj;
print("Original Object:\n");
print_r($obj);
echo '<br>';
print("Cloned Object:\n");
print_r($obj2);
==================
the output is as below
Original Object:
MyCloneable Object
(
[object1] => SubObject Object
(
[construct_value] => 1
[clone_value] =>
)
[object2] => SubObject Object
(
[construct_value] => 2
[clone_value] =>
)
)
<br>Cloned Object:
MyCloneable Object
(
[object1] => SubObject Object
(
[construct_value] => 1
[clone_value] => 1
)
[object2] => SubObject Object
(
[construct_value] => 2
[clone_value] =>
)
)
crrodriguez at suse dot de ¶
16 years ago
Keep in mind that since PHP 5.2.5, trying to clone a non-object correctly results in a fatal error, this differs from previous versions where only a Warning was thrown.
cheetah at tanabi dot org ¶
15 years ago
Want deep cloning without too much hassle?
<?php
function __clone() {
foreach($this as $key => $val) {
if(is_object($val)||(is_array($val))){
$this->{$key} = unserialize(serialize($val));
}
}
}
?>
That will insure any object, or array that may potentially contain objects, will get cloned without using recursion or other support methods.
[EDIT BY danbrown AT php DOT net: An almost exact function was contributed on 02-DEC-2008-10:18 by (david ashe AT metabin):
<?php
function __clone(){
foreach($this as $name => $value){
if(gettype($value)=='object'){
$this->$name= clone($this->$name);
}
}
}
?>
Giving credit where it's due. ~DPB]
[EDIT BY cmb AT php DOT net: the latter function fails to make deep copies of object arrays, and might end up with infinite recursion.]
jason at jewelrysupply dot com ¶
9 years ago
@DPB
I believe the two functions are not quite the same. The serialize followed by deserialize method is the way I've done deep cloning in other languages (bypasses any weird clone function behavior and ensures you have a no-strings-attached copy of the object).
