A word of warning! It may seem obvious, but remember, when deciding whether to use __get, __set, and __call as a way to access the data in your class (as opposed to hard-coding getters and setters), keep in mind that this will prevent any sort of autocomplete, highlighting, or documentation that your ide mite do.
Furthermore, it beyond personal preference when working with other people. Even without an ide, it can be much easier to go through and look at hardcoded member and method definitions in code, than having to sift through code and piece together the method/member names that are assembled in __get and __set.
If you still decide to use __get and __set for everything in your class, be sure to include detailed comments and documenting, so that the people you are working with (or the people who inherit the code from you at a later date) don't have to waste time interpreting your code just to be able to use it.
오버로딩
PHP 에서 오버로딩의 의미는 동적으로 프로퍼티나 메서드를 "생성"함을 의미합니다. 이러한 동적 엔터티들은 클래스의 매직 메서드를 통해 다양한 형태로 처리됩니다.
오버로딩 기능은 현재 스코프에서 정의되지 않거나 보이지 않는 프로퍼티나 메서드를 조작하려고 할때 호출됩니다. 이 문서에서는 "접근불가 프로퍼티" 와 "접근불가 메서드"를 위의 내용을 지칭하는데 사용하겠습니다.
모든 오버로딩 메서드는 public 으로 정의되어야 합니다.
Note:
매직 매서드의 인자는 참조 전달 이 될 수 없습니다.
Note:
PHP의 "오버로딩"에 대한 해석은 다른 대부분의 객체 지향 언어들과는 다릅니다. 일반적으로는 오버로딩은 동일한 이름을 사용하여 인자의 갯수와 타입을 달리하여 다중으로 메서드를 정의할 수 있는 기능을 의미합니다.
변경점
| 버전 | 설명 |
|---|---|
| 5.3.0 | 추가됨 __callStatic(). public 으로 강제하고 non-static 선언일때 경고를 추가함. |
| 5.1.0 | 추가됨 __isset() and __unset(). __get() 의 private 프로퍼팅의 오버로딩에 대한 대응이 추가됨. |
| 5.0.0 | 추가됨 __get(). |
프로퍼티 오버로딩
public bool __isset
( string
$name
)
public void __unset
( string
$name
)__set() 은 접근불가 프로퍼티에 쓰기를 할때 실행됩니다.
__get() 은 접근불가 프로퍼티에서 읽기를 할때 사용합니다.
__isset() 은 접근불가 프로퍼티에 대해 isset() 나 empty() 가 호출되었을때 불려집니다.
__unset() 은 접근불가 프로퍼티를 unset() 했을때 호출됩니다.
$name 인자는 다루고자 하는 프로퍼티 이름입니다. __set() 메서드의 $value 인자는 $name 의 값으로 세팅하고자 하는 값입니다.
프로퍼티 오버로딩은 객체 컨텍스트내에서만 동작합니다. 이 매직메서드들은 정적 컨텍스트내에서는 불려지지 않을 것입니다. 게다가 이 메서드들은 static 으로 선언할 수 없습니다. PHP 5.3.0 이후로는 매직 오버로딩 메서드가 static 으로 선언되어 있을경우 경고를 발생합니다.
Note:
__set() 의 리턴값은 무시됩니다. 이것은 PHP가 할당연산을 처리하는 방식에 기인합니다. 비슷하게, 연결된 할당은 __get() 을 절대 호출하지 않습니다. 예:
$a = $obj->b = 8;
Example #1 __get(), __set(), __isset() 과 __unset() 메서드로 프로퍼티 오버로딩하기
<?php
class PropertyTest
{
/** 오버로드된 데이터의 위치 */
private $data = array();
/** 선언된 프로퍼티는 오버로딩 하지 않음 */
public $declared = 1;
/** 외부 클래스에서 접근하는 경우에만 오버로딩 됨 */
private $hidden = 2;
public function __set($name, $value)
{
echo "Setting '$name' to '$value'\n";
$this->data[$name] = $value;
}
public function __get($name)
{
echo "Getting '$name'\n";
if (array_key_exists($name, $this->data)) {
return $this->data[$name];
}
$trace = debug_backtrace();
trigger_error(
'Undefined property via __get(): ' . $name .
' in ' . $trace[0]['file'] .
' on line ' . $trace[0]['line'],
E_USER_NOTICE);
return null;
}
/** PHP 5.1.0 이후 */
public function __isset($name)
{
echo "Is '$name' set?\n";
return isset($this->data[$name]);
}
/** PHP 5.1.0 이후 */
public function __unset($name)
{
echo "Unsetting '$name'\n";
unset($this->data[$name]);
}
/** 매직 메서드는 아님 */
public function getHidden()
{
return $this->hidden;
}
}
echo "<pre>\n";
$obj = new PropertyTest;
$obj->a = 1;
echo $obj->a . "\n\n";
var_dump(isset($obj->a));
unset($obj->a);
var_dump(isset($obj->a));
echo "\n";
echo $obj->declared . "\n\n";
echo "Let's experiment with the private property named 'hidden':\n";
echo "Privates are visible inside the class, so __get() not used...\n";
echo $obj->getHidden() . "\n";
echo "Privates not visible outside of class, so __get() is used...\n";
echo $obj->hidden . "\n";
?>
위 예제의 출력:
Setting 'a' to '1' Getting 'a' 1 Is 'a' set? bool(true) Unsetting 'a' Is 'a' set? bool(false) 1 Let's experiment with the private property named 'hidden': Privates are visible inside the class, so __get() not used... 2 Privates not visible outside of class, so __get() is used... Getting 'hidden' Notice: Undefined property via __get(): hidden in <file> on line 70 in <file> on line 29
메서드 오버로딩
__call()은 오브젝트 컨텍스트내에서 접근불가 메서드를 호출할때 불려집니다.
__callStatic() 은 정적 컨텍스트내에서 접근불가 메서드를 호출할때 불려집니다.
$name인자는 불려질 메서드의 이름입니다. $arguments 는 $name 메서드로 전달될 파라미터 배열입니다.
Example #2 __call() 과 __callStatic() 로 메서드 오버로딩하기
<?php
class MethodTest
{
public function __call($name, $arguments)
{
// 주의: $name 의 값은 대소를 구분합니다.
echo "Calling object method '$name' "
. implode(', ', $arguments). "\n";
}
/** PHP 5.3.0 이후 */
public static function __callStatic($name, $arguments)
{
// 주의: $name 의 값은 대소를 구분합니다.
echo "Calling static method '$name' "
. implode(', ', $arguments). "\n";
}
}
$obj = new MethodTest;
$obj->runTest('in object context');
MethodTest::runTest('in static context'); // As of PHP 5.3.0
?>
위 예제의 출력:
Calling object method 'runTest' in object context Calling static method 'runTest' in static context
add a note
User Contributed Notes 27 notes
theaceofthespade at gmail dot com ¶
12 years ago
Anonymous ¶
8 years ago
First off all, if you read this, please upvote the first comment on this list that states that “overloading” is a bad term for this behaviour. Because it REALLY is a bad name. You’re giving new definition to an already accepted IT-branch terminology.
Second, I concur with all criticism you will read about this functionality. Just as naming it “overloading”, the functionality is also very bad practice. Please don’t use this in a production environment. To be honest, avoid to use it at all. Especially if you are a beginner at PHP. It can make your code react very unexpectedly. In which case you MIGHT be learning invalid coding!
And last, because of __get, __set and __call the following code executes. Which is abnormal behaviour. And can cause a lot of problems/bugs.
<?php
class BadPractice {
// Two real properties
public $DontAllowVariableNameWithTypos = true;
protected $Number = 0;
// One private method
private function veryPrivateMethod() { }
// And three very magic methods that will make everything look inconsistent
// with all you have ever learned about PHP.
public function __get($n) {}
public function __set($n, $v) {}
public function __call($n, $v) {}
}
// Let's see our BadPractice in a production environment!
$UnexpectedBehaviour = new BadPractice;
// No syntax highlighting on most IDE's
$UnexpectedBehaviour->SynTaxHighlighting = false;
// No autocompletion on most IDE's
$UnexpectedBehaviour->AutoCompletion = false;
// Which will lead to problems waiting to happen
$UnexpectedBehaviour->DontAllowVariableNameWithTyphos = false; // see if below
// Get, Set and Call anything you want!
$UnexpectedBehaviour->EveryPosibleMethodCallAllowed(true, 'Why Not?');
// And sure, why not use the most illegal property names you can think off
$UnexpectedBehaviour->{'100%Illegal+Names'} = 'allowed';
// This Very confusing syntax seems to allow access to $Number but because of
// the lowered visibility it goes to __set()
$UnexpectedBehaviour->Number = 10;
// We can SEEM to increment it too! (that's really dynamic! :-) NULL++ LMAO
$UnexpectedBehaviour->Number++;
// this ofcourse outputs NULL (through __get) and not the PERHAPS expected 11
var_dump($UnexpectedBehaviour->Number);
// and sure, private method calls LOOK valid now!
// (this goes to __call, so no fatal error)
$UnexpectedBehaviour->veryPrivateMethod();
// Because the previous was __set to false, next expression is true
// if we didn't had __set, the previous assignment would have failed
// then you would have corrected the typho and this code will not have
// been executed. (This can really be a BIG PAIN)
if ($UnexpectedBehaviour->DontAllowVariableNameWithTypos) {
// if this code block would have deleted a file, or do a deletion on
// a database, you could really be VERY SAD for a long time!
$UnexpectedBehaviour->executeStuffYouDontWantHere(true);
}
?>
egingell at sisna dot com ¶
17 years ago
Small vocabulary note: This is *not* "overloading", this is "overriding".
Overloading: Declaring a function multiple times with a different set of parameters like this:
<?php
function foo($a) {
return $a;
}
function foo($a, $b) {
return $a + $b;
}
echo foo(5); // Prints "5"
echo foo(5, 2); // Prints "7"
?>
Overriding: Replacing the parent class's method(s) with a new method by redeclaring it like this:
<?php
class foo {
function new($args) {
// Do something.
}
}
class bar extends foo {
function new($args) {
// Do something different.
}
}
?>
Anonymous ¶
9 years ago
Using magic methods, especially __get(), __set(), and __call() will effectively disable autocomplete in most IDEs (eg.: IntelliSense) for the affected classes.
To overcome this inconvenience, use phpDoc to let the IDE know about these magic methods and properties: @method, @property, @property-read, @property-write.
/**
* @property-read name
* @property-read price
*/
class MyClass
{
private $properties = array('name' => 'IceFruit', 'price' => 2.49)
public function __get($name)
{
return $this->properties($name);
}
}
pogregoire##live.fr ¶
8 years ago
It is important to understand that encapsulation can be very easily violated in PHP. for example :
class Object{
}
$Object = new Object();
$Objet->barbarianProperties = 'boom';
var_dump($Objet);// object(Objet)#1 (1) { ["barbarianProperties"]=> string(7) "boom" }
Hence it is possible to add a propertie out form the class definition.
It is then a necessity in order to protect encapsulation to introduce __set() in the class :
class Objet{
public function __set($name,$value){
throw new Exception ('no');
}
}
johannes dot kingma at gmail dot com ¶
3 years ago
One interesting use of the __get function is property / function colaescence, using the same name for a property and a function.
Example:
<?php
class prop_fun {
private $prop = 123;
public function __get( $property ) {
if( property_exists( $this, $property ) ){
return $this-> $property;
}
throw new Exception( "no such property $property." );
}
public function prop() {
return 456;
}
}
$o = new prop_fun();
echo $o-> prop . '<br>' . PHP_EOL;
echo $o-> prop() . '<br>' . PHP_EOL;
?>
This will output 123 and 456. This does look like a funy cludge but I used it of a class containing a date type property and function allowing me to write
<?php
class date_class {
/** @property int $date */
private $the_date;
public function __get( $property ) {
if( property_exists( $this, $property ) ){
return $this-> $property;
}
throw new Exception( "no such property $property." );
}
public function the_date( $datetime ) {
return strtotime( $datetime, $this-> the_date );
}
public function __construct() {
$this-> the_date = time();
}
}
$date_object = new date_class();
$today = $date_object-> the_date;
$nextyear = $date_object-> the_date("+1 year");
echo date( "d/m/Y", $today) . '<br>';
echo date( "d/m/Y", $nextyear );
?>
Which I like because its self documenting properties. I used this in a utility class for user input.
Ant P. ¶
16 years ago
Be extra careful when using __call(): if you typo a function call somewhere it won't trigger an undefined function error, but get passed to __call() instead, possibly causing all sorts of bizarre side effects.
In versions before 5.3 without __callStatic, static calls to nonexistent functions also fall through to __call!
This caused me hours of confusion, hopefully this comment will save someone else from the same.
navarr at gtaero dot net ¶
14 years ago
If you want to make it work more naturally for arrays $obj->variable[] etc you'll need to return __get by reference.
<?php
class Variables
{
public function __construct()
{
if(session_id() === "")
{
session_start();
}
}
public function __set($name,$value)
{
$_SESSION["Variables"][$name] = $value;
}
public function &__get($name)
{
return $_SESSION["Variables"][$name];
}
public function __isset($name)
{
return isset($_SESSION["Variables"][$name]);
}
}
?>
turabgarip at gmail dot com ¶
3 years ago
I concur that "overloading" is a wrong term for this functionality. But I disagree that this functionality is completely wrong. You can do "bad practice" with right code too.
For example __call() is very well applicable to external integration implementations which I am using to relay calls to SOAP methods which doesn't need local implementation. So you don't have to write "empty body" functions. Consider the SOAP service you connect has a "stock update" method. All you have to do is passing product code and stock count to SOAP.
<?php
class Inventory {
public __construct() {
// configure and connect to SOAP service
$this->soap = new SoapClient();
}
public __call($soapMethod, $params) {
$this->soap->{$soapMethod}(params);
}
}
// Now you can use any SOAP method without needing a wrapper
$stock = new Inventory();
$stock->updatePrice($product_id, 20);
$stock->saveProduct($product_info);
?>
Of course you'd need a parameter mapping but it's in my honest opinion a lot better then having a plenty of mirror methods like:
<?php
class Inventory {
public function updateStock($product_id, $stock) {
$soapClient->updateStock($product_id, $stock;
}
public function updatePrice($product_id, $price) {
$soapClient->updateStock($product_id, $price;
}
// ...
}
?>
gabe at fijiwebdesign dot com ¶
10 years ago
Note that you can enable "overloading" on a class instance at runtime for an existing property by unset()ing that property.
eg:
<?php
class Test {
public $property1;
public function __get($name)
{
return "Get called for " . get_class($this) . "->\$$name \n";
}
}
?>
The public property $property1 can be unset() so that it can be dynamically handled via __get().
<?php
$Test = new Test();
unset($Test->property1); // enable overloading
echo $Test->property1; // Get called for Test->$property1
?>
Useful if you want to proxy or lazy load properties yet want to have documentation and visibility in the code and debugging compared to __get(), __isset(), __set() on non-existent inaccessible properties.
php at lanar dot com dot au ¶
14 years ago
Note that __isset is not called on chained checks.
If isset( $x->a->b ) is executed where $x is a class with __isset() declared, __isset() is not called.
<?php
class demo
{
var $id ;
function __construct( $id = 'who knows' )
{
$this->id = $id ;
}
function __get( $prop )
{
echo "\n", __FILE__, ':', __LINE__, ' ', __METHOD__, '(', $prop, ') instance ', $this->id ;
return new demo( 'autocreated' ) ; // return a class anyway for the demo
}
function __isset( $prop )
{
echo "\n", __FILE__, ':', __LINE__, ' ', __METHOD__, '(', $prop, ') instance ', $this->id ;
return FALSE ;
}
}
$x = new demo( 'demo' ) ;
echo "\n", 'Calls __isset() on demo as expected when executing isset( $x->a )' ;
$ret = isset( $x->a ) ;
echo "\n", 'Calls __get() on demo without call to __isset() when executing isset( $x->a->b )' ;
$ret = isset( $x->a->b ) ;
?>
Outputs
Calls __isset() on demo as expected when executing isset( $x->a )
C:\htdocs\test.php:31 demo::__isset(a) instance demo
Calls __get() on demo without call to __isset() when executing isset( $x->a->b )
C:\htdocs\test.php:26 demo::__get(a) instance demo
C:\htdocs\test.php:31 demo::__isset(b) instance autocreated
PHP at jyopp dotKomm ¶
19 years ago
Here's a useful class for logging function calls. It stores a sequence of calls and arguments which can then be applied to objects later. This can be used to script common sequences of operations, or to make "pluggable" operation sequences in header files that can be replayed on objects later.
If it is instantiated with an object to shadow, it behaves as a mediator and executes the calls on this object as they come in, passing back the values from the execution.
This is a very general implementation; it should be changed if error codes or exceptions need to be handled during the Replay process.
<?php
class MethodCallLog {
private $callLog = array();
private $object;
public function __construct($object = null) {
$this->object = $object;
}
public function __call($m, $a) {
$this->callLog[] = array($m, $a);
if ($this->object) return call_user_func_array(array(&$this->object,$m),$a);
return true;
}
public function Replay(&$object) {
foreach ($this->callLog as $c) {
call_user_func_array(array(&$object,$c[0]), $c[1]);
}
}
public function GetEntries() {
$rVal = array();
foreach ($this->callLog as $c) {
$rVal[] = "$c[0](".implode(', ', $c[1]).");";
}
return $rVal;
}
public function Clear() {
$this->callLog = array();
}
}
$log = new MethodCallLog();
$log->Method1();
$log->Method2("Value");
$log->Method1($a, $b, $c);
// Execute these method calls on a set of objects...
foreach ($array as $o) $log->Replay($o);
?>
cottton at i-stats dot net ¶
10 years ago
Actually you dont need __set ect imo.
You could use it to set (pre-defined) protected (and in "some" cases private) properties . But who wants that?
(test it by uncommenting private or protected)
(pastebin because long ...) => http://pastebin.com/By4gHrt5
jstubbs at work-at dot co dot jp ¶
18 years ago
<?php $myclass->foo['bar'] = 'baz'; ?>
When overriding __get and __set, the above code can work (as expected) but it depends on your __get implementation rather than your __set. In fact, __set is never called with the above code. It appears that PHP (at least as of 5.1) uses a reference to whatever was returned by __get. To be more verbose, the above code is essentially identical to:
<?php
$tmp_array = &$myclass->foo;
$tmp_array['bar'] = 'baz';
unset($tmp_array);
?>
Therefore, the above won't do anything if your __get implementation resembles this:
<?php
function __get($name) {
return array_key_exists($name, $this->values)
? $this->values[$name] : null;
}
?>
You will actually need to set the value in __get and return that, as in the following code:
<?php
function __get($name) {
if (!array_key_exists($name, $this->values))
$this->values[$name] = null;
return $this->values[$name];
}
?>
justmyoponion at gmail dot com ¶
5 years ago
If you are not focused enough, then don't use it.
Otherwise it is very powerful and you can build very complex code that handle a lot of things like zend framework did.
matthijs at yourmediafactory dot com ¶
17 years ago
While PHP does not support true overloading natively, I have to disagree with those that state this can't be achieved trough __call.
Yes, it's not pretty but it is definately possible to overload a member based on the type of its argument. An example:
<?php
class A {
public function __call ($member, $arguments) {
if(is_object($arguments[0]))
$member = $member . 'Object';
if(is_array($arguments[0]))
$member = $member . 'Array';
$this -> $member($arguments);
}
private function testArray () {
echo "Array.";
}
private function testObject () {
echo "Object.";
}
}
class B {
}
$class = new A;
$class -> test(array()); // echo's 'Array.'
$class -> test(new B); // echo's 'Object.'
?>
Of course, the use of this is questionable (I have never needed it myself, but then again, I only have a very minimalistic C++ & JAVA background). However, using this general principle and optionally building forth on other suggestions a 'form' of overloading is definately possible, provided you have some strict naming conventions in your functions.
It would of course become a LOT easier once PHP'd let you declare the same member several times but with different arguments, since if you combine that with the reflection class 'real' overloading comes into the grasp of a good OO programmer. Lets keep our fingers crossed!
alexandre at nospam dot gaigalas dot net ¶
17 years ago
PHP 5.2.1
Its possible to call magic methods with invalid names using variable method/property names:
<?php
class foo
{
function __get($n)
{
print_r($n);
}
function __call($m, $a)
{
print_r($m);
}
}
$test = new foo;
$varname = 'invalid,variable+name';
$test->$varname;
$test->$varname();
?>
I just don't know if it is a bug or a feature :)
timshaw at mail dot NOSPAMusa dot com ¶
16 years ago
The __get overload method will be called on a declared public member of an object if that member has been unset.
<?php
class c {
public $p ;
public function __get($name) { return "__get of $name" ; }
}
$c = new c ;
echo $c->p, "\n" ; // declared public member value is empty
$c->p = 5 ;
echo $c->p, "\n" ; // declared public member value is 5
unset($c->p) ;
echo $c->p, "\n" ; // after unset, value is "__get of p"
?>
Marius ¶
19 years ago
for anyone who's thinking about traversing some variable tree
by using __get() and __set(). i tried to do this and found one
problem: you can handle couple of __get() in a row by returning
an object which can handle consequential __get(), but you can't
handle __get() and __set() that way.
i.e. if you want to:
<?php
print($obj->val1->val2->val3); // three __get() calls
?> - this will work,
but if you want to:
<?php
$obj->val1->val2 = $val; // one __get() and one __set() call
?> - this will fail with message:
"Fatal error: Cannot access undefined property for object with
overloaded property access"
however if you don't mix __get() and __set() in one expression,
it will work:
<?php
$obj->val1 = $val; // only one __set() call
$val2 = $obj->val1->val2; // two __get() calls
$val2->val3 = $val; // one __set() call
?>
as you can see you can split __get() and __set() parts of
expression into two expressions to make it work.
by the way, this seems like a bug to me, will have to report it.
daevid at daevid dot com ¶
15 years ago
Here's a handy little routine to suggest properties you're trying to set that don't exist. For example:
Attempted to __get() non-existant property/variable 'operator_id' in class 'User'.
checking for operator and suggesting the following:
* id_operator
* operator_name
* operator_code
enjoy.
<?php
/**
* Suggests alternative properties should a __get() or __set() fail
*
* @param string $property
* @return string
* @author Daevid Vincent [daevid@daevid.com]
* @date 05/12/09
* @see __get(), __set(), __call()
*/
public function suggest_alternative($property)
{
$parts = explode('_',$property);
foreach($parts as $i => $p) if ($p == '_' || $p == 'id') unset($parts[$i]);
echo 'checking for <b>'.implode(', ',$parts)."</b> and suggesting the following:<br/>\n";
echo "<ul>";
foreach($this as $key => $value)
foreach($parts as $p)
if (stripos($key, $p) !== false) print '<li>'.$key."</li>\n";
echo "</ul>";
}
just put it in your __get() or __set() like so:
public function __get($property)
{
echo "<p><font color='#ff0000'>Attempted to __get() non-existant property/variable '".$property."' in class '".$this->get_class_name()."'.</font><p>\n";
$this->suggest_alternative($property);
exit;
}
?>
Adeel Khan ¶
17 years ago
Observe:
<?php
class Foo {
function __call($m, $a) {
die($m);
}
}
$foo = new Foo;
print $foo->{'wow!'}();
// outputs 'wow!'
?>
This method allows you to call functions with invalid characters.
Daniel Smith ¶
13 years ago
Be careful of __call in case you have a protected/private method. Doing this:
<?php
class TestMagicCallMethod {
public function foo()
{
echo __METHOD__.PHP_EOL;
}
public function __call($method, $args)
{
echo __METHOD__.PHP_EOL;
if(method_exists($this, $method))
{
$this->$method();
}
}
protected function bar()
{
echo __METHOD__.PHP_EOL;
}
private function baz()
{
echo __METHOD__.PHP_EOL;
}
}
$test = new TestMagicCallMethod();
$test->foo();
/**
* Outputs:
* TestMagicCallMethod::foo
*/
$test->bar();
/**
* Outputs:
* TestMagicCallMethod::__call
* TestMagicCallMethod::bar
*/
$test->baz();
/**
* Outputs:
* TestMagicCallMethod::__call
* TestMagicCallMethod::baz
*/
?>
..is probably not what you should be doing. Always make sure that the methods you call in __call are allowed as you probably dont want all the private/protected methods to be accessed by a typo or something.
Nanhe Kumar ¶
10 years ago
<?php
//How can implement __call function you understand better
class Employee {
protected $_name;
protected $_email;
protected $_compony;
public function __call($name, $arguments) {
$action = substr($name, 0, 3);
switch ($action) {
case 'get':
$property = '_' . strtolower(substr($name, 3));
if(property_exists($this,$property)){
return $this->{$property};
}else{
$trace = debug_backtrace();
trigger_error('Undefined property ' . $name . ' in ' . $trace[0]['file'] . ' on line ' . $trace[0]['line'], E_USER_NOTICE);
return null;
}
break;
case 'set':
$property = '_' . strtolower(substr($name, 3));
if(property_exists($this,$property)){
$this->{$property} = $arguments[0];
}else{
$trace = debug_backtrace();
trigger_error('Undefined property ' . $name . ' in ' . $trace[0]['file'] . ' on line ' . $trace[0]['line'], E_USER_NOTICE);
return null;
}
break;
default :
return FALSE;
}
}
}
$s = new Employee();
$s->setName('Nanhe Kumar');
$s->setEmail('nanhe.kumar@gmail.com');
echo $s->getName(); //Nanhe Kumar
echo $s->getEmail(); // nanhe.kumar@gmail.com
$s->setAge(10); //Notice: Undefined property setAge in
?>
strata_ranger at hotmail dot com ¶
15 years ago
Combining two things noted previously:
1 - Unsetting an object member removes it from the object completely, subsequent uses of that member will be handled by magic methods.
2 - PHP will not recursively call one magic method from within itself (at least for the same $name).
This means that if an object member has been unset(), it IS possible to re-declare that object member (as public) by creating it within your object's __set() method, like this:
<?php
class Foo
{
function __set($name, $value)
{
// Add a new (public) member to this object.
// This works because __set() will not recursively call itself.
$this->$name= $value;
}
}
$foo = new Foo();
// $foo has zero members at this point
var_dump($foo);
// __set() will be called here
$foo->bar = 'something'; // Calls __set()
// $foo now contains one member
var_dump($foo);
// Won't call __set() because 'bar' is now declared
$foo->bar = 'other thing';
?>
Also be mindful that if you want to break a reference involving an object member without triggering magic functionality, DO NOT unset() the object member directly. Instead use =& to bind the object member to any convenient null variable.
DevilDude at darkmaker dot com ¶
20 years ago
Php 5 has a simple recursion system that stops you from using overloading within an overloading function, this means you cannot get an overloaded variable within the __get method, or within any functions/methods called by the _get method, you can however call __get manualy within itself to do the same thing.
dans at dansheps dot com ¶
13 years ago
Since this was getting me for a little bit, I figure I better pipe in here...
For nested calls to private/protected variables(probably functions too) what it does is call a __get() on the first object, and if you return the nested object, it then calls a __get() on the nested object because, well it is protected as well.
EG:
<?php
class A
{
protected $B
public function __construct()
{
$this->B = new B();
}
public function __get($variable)
{
echo "Class A::Variable " . $variable . "\n\r";
$retval = $this->{$variable};
return $retval;
}
}
class B
{
protected $val
public function __construct()
{
$this->val = 1;
}
public function __get($variable)
{
echo "Class B::Variable " . $variable . "\n\r";
$retval = $this->{$variable};
return $retval;
}
}
$A = new A();
echo "Final Value: " . $A->B->val;
?>
That will return something like...
Class A::Variable B
Class B::Variable val
Final Value: 1
It seperates the calls into $A->B and $B->val
Hope this helps someone
php at sleep is the enemy dot co dot uk ¶
17 years ago
Just to reinforce and elaborate on what DevilDude at darkmaker dot com said way down there on 22-Sep-2004 07:57.
The recursion detection feature can prove especially perilous when using __set. When PHP comes across a statement that would usually call __set but would lead to recursion, rather than firing off a warning or simply not executing the statement it will act as though there is no __set method defined at all. The default behaviour in this instance is to dynamically add the specified property to the object thus breaking the desired functionality of all further calls to __set or __get for that property.
Example:
<?php
class TestClass{
public $values = array();
public function __get($name){
return $this->values[$name];
}
public function __set($name, $value){
$this->values[$name] = $value;
$this->validate($name);
}
public function validate($name){
/*
__get will be called on the following line
but as soon as we attempt to call __set
again PHP will refuse and simply add a
property called $name to $this
*/
$this->$name = trim($this->$name);
}
}
$tc = new TestClass();
$tc->foo = 'bar';
$tc->values['foo'] = 'boing';
echo '$tc->foo == ' . $tc->foo . '<br>';
echo '$tc ' . (property_exists($tc, 'foo') ? 'now has' : 'still does not have') . ' a property called "foo"<br>';
/*
OUPUTS:
$tc->foo == bar
$tc now has a property called "foo"
*/
?>
