mb_ereg_replace

(PHP 4 >= 4.2.0, PHP 5, PHP 7, PHP 8)

mb_ereg_replace — Заменяет по регулярному выражению с поддержкой многобайтовых кодировок

Описание

mb_ereg_replace(
    string $pattern,
    string $replacement,
    string $string,
    ?string $options = null
): string|false|null

Сканирует строку string для поиска совпадений с шаблоном pattern, затем заменяет совпавший текст на значение параметра replacement.

Список параметров

pattern

Шаблон регулярного выражения.

В шаблоне pattern можно указывать многобайтовые символы.

replacement

Текст замены.

string

Проверяемая строка (string).

options

Вариант поиска. Объяснение дано в описании функции mb_regex_set_options().

Возвращаемые значения

Возвращает результирующую строку в случае успешного выполнения или false в случае возникновения ошибки. Если строка string недопустима для текущей кодировки, возвращается значение null.

Список изменений

Версия	Описание
8.0.0	Параметр `options` теперь может принимать значение null.
7.1.0	Функция проверяет, допустима ли строка `string` для текущей кодировки.
7.1.0	Модификатор `e` объявлен устаревшим.

Примечания

Замечание:
Для этой функции будет использована внутренняя кодировка или кодировка, установленная функцией mb_regex_encoding().

Внимание

Никогда не используйте модификатор e при работе с данными, полученными из недостоверных источников. Не выполняется никакого автоматического экранирования этих данных (в отличие от preg_replace()). Игнорирование этих требований, скорее всего, создаст уязвимость выполнения удалённого кода в приложении.

Смотрите также

mb_regex_encoding() - Устанавливает/получает кодировку символов для многобайтового регулярного выражения
mb_eregi_replace() - Заменяет по регулярному выражению с поддержкой многобайтовых символов без учёта регистра

add a note

User Contributed Notes 17 notes

down

124

Pluche ¶

13 years ago


Unlike preg_replace, mb_ereg_replace doesn't use separators



Exemple with preg_replace :

<?php $data = preg_replace("/[^A-Za-z0-9\.\-]/","",$data); ?>



Exemple with mb_ereg_replace :

<?php $data = mb_ereg_replace("[^A-Za-z0-9\.\-]","",$data); ?>

down

daemoneye at gmail dot com ¶

15 years ago


I got a pretty nasty error while trying to parse table rows(all contents were set to UTF-8) from the database for a dictionary project. The idea was to get all the rows from the first table (that is a table with bulgarian phrase in the first field, and its translation in english, french and german in the next fields). I needed to index all the bulgarian words that are found in the table to make an intelligent search. And that is where my headache started.

First of all, even with mb_strtolower() a lot of cyrillic characters went corrupted (ex: 'т,ъ,у,ф,б,г,з,ж,' etc...). After an hour of different attempts I got such a solution:

<?php

mb_internal_encoding("UTF-8");
mb_regex_encoding("UTF-8");

$rows = $db->getRows();

$contents = array();
foreach ($rows as $eachRow)
{
    $cleared = str_replace($commonWords, ' ', mb_strtolower(stripslashes($eachRow['bulgarian']), 'UTF-8' ));
    if (trim($cleared) != '') $contents[] = trim($cleared);
}    

$list = array();
foreach ($contents as $eachRow)
{
    $exploded = explode(' ', $eachRow);
    foreach ($exploded as $eachExpl)
    {
        $eachExpl = mb_ereg_replace('[^а-я ]',' ', $eachExpl);
        if (trim($eachExpl) != '') 
            if (!in_array($eachExpl, $list, true))    $list[] = trim($eachExpl);
    }
}

?>

To work properly I got to set all the internal encoding settings to UTF-8. Else the default Latin-1 got half my database with missing characters.

I am posting this solution just in case someone has encountered a similar problem. Hope it helps you in case you need something like that.

down

trng ¶

13 years ago


You can use \\n for capture group in replacement.
And you can NOT use $n notation (unlike preg_replace function).

down

Anonymous ¶

8 years ago


Pluche's comment should REALLY be added to the documentation, preferably under the "$pattern" param description. It is crucial to using this function.

down

keizo at gomo dot jp ¶

16 years ago


<?php

$pattern = "([あ-ん]+)[0-9]+";

$string = mb_ereg_replace($pattern, '「\\1」:\\0', $string);

?>



you can use \\n for capture group in replacement

down

Alexey Khrulev ¶

7 years ago


If encoding of PHP script differs from encoding of string to be processed by mb_ereg_replace(), then you can't just write pattern in script. Both $pattern and $replacement must be converted to same encoding as string to be processed. In this example script is in UTF-8, file to be processed is in UTF-16LE encoding:

<?php
$file_encoding = 'UTF-16LE';
mb_regex_encoding( $file_encoding );

$pattern     = "aaa";
$replacement = "AAA";
$pattern_encoded     = mb_convert_encoding( $pattern,     $file_encoding, 'UTF-8' );
$replacement_encoded = mb_convert_encoding( $replacement, $file_encoding, 'UTF-8' );

$result = mb_ereg_replace( $pattern_encoded, $replacement_encoded, file_get_contents('UTF-16LE.txt') );
file_put_contents('UTF-16LE-updated.txt', $result);
?>

down

faxe at neostrada dot pl ¶

19 years ago


A simple mb_str_ireplace() implementation - a faster (?) replacement for non-regexp multi-byte string replacement:



<?php

function mb_str_ireplace($co, $naCo, $wCzym)

{

    $wCzymM = mb_strtolower($wCzym);

    $coM    = mb_strtolower($co);

    $offset = 0;

    

        while(!is_bool($poz = mb_strpos($wCzymM, $coM, $offset)))

    {

        $offset = $poz + mb_strlen($naCo);

        $wCzym = mb_substr($wCzym, 0, $poz). $naCo .mb_substr($wCzym, $poz+mb_strlen($co));

        $wCzymM = mb_strtolower($wCzym);

    }

    

    return $wCzym;

}

?>



[thiago - EDITOR NOTE: This function has improvements from d-okumura [aat] fi{dot}kyd[dot]co.jp]

down

Anonymous ¶

2 years ago


Notations to reference captures in the replacement string:

<?php

// (1) \\number notation: (1 to 9, not greater than 9)
echo mb_ereg_replace('(\S*) (\S*) (\S*)', '\\1 jam, \\2 juice, \\3 squash', 'apple orange lemon').'<br>'; // apple jam, orange juice, lemon squash

// (2) \k<number> notation: (also greater than 9) (also as \k'number')
echo mb_ereg_replace('(\S*) (\S*) (\S*)', '\k<1> jam, \k<2> juice, \k<3> squash', 'apple orange lemon').'<br>'; // (same as above)

// (3) \k<word> notation: (also as \k'word')
echo mb_ereg_replace('(?<word1>\S*) (?<word2>\S*) (?<word3>\S*)', '\k<word1> jam, \k<word2> juice, \k<word3> squash', 'apple orange lemon').'<br>'; // (same as above)

// Note non-named-subpatterns like "(\S*)" should not be used with named-subpatterns like "(?<word>..)" because non-named-subpatterns cannot be captured when named-subpatterns exist.

down

-1

j-fr dot fortier at wanadoo dot fr ¶

5 years ago


Since PHP 5.4, to make uppercase ou lowercase characters, or rewrite some uris, without to take care about initial encoding, the transliteration is easier (and probably the best way): see http://php.net/manual/fr/transliterator.transliterate.php and http://userguide.icu-project.org/transforms/general

For example (with create) (french text: replace all accuentued -éèàîïùç...- chars with ascii chars):
<?php
$transliterator = Transliterator::create("NFD; [:Nonspacing Mark:] Remove; NFC;");
echo $transliterator->transliterate("Héhé, ça marche !");
?>
// Result: « Hehe, ca marche ! »

To rewrite a phrase in URI (with createFromRules):
<?php
$transliterator = Transliterator::createFromRules("::Latin-ASCII; ::Lower; [^[:L:][:N:]]+ > '-';");
echo trim($transliterator->transliterate("Héhé, ça marche !"), '-');
?>
// Result : « hehe-ca-marche »

down

vondrej(at)gmail(dot)com ¶

18 years ago


Are you looking for htmlentities() for multibyte strings? This might help you - it just replace <, >, ", '



<?php

/**

 *  Multibyte equivalent for htmlentities() [lite version :)]

 *

 * @param string $str

 * @param string $encoding

 * @return string

 **/

function mb_htmlentities($str, $encoding = 'utf-8') {

    mb_regex_encoding($encoding);

    $pattern = array('<', '>', '"', '\'');

    $replacement = array('&lt;', '&gt;', '&quot;', '&#39;');

    for ($i=0; $i<sizeof($pattern); $i++) {

        $str = mb_ereg_replace($pattern[$i], $replacement[$i], $str);

    }

    return $str;

}

?>

down

Anonymous ¶

18 years ago


'i' option does not work correctly with multibyte characters. The function does not locate/replace the multibyte string if it's different case then specified on multibyte needle which is in different case.

down

-2

gmx dot net at ulrich dot mierendorff ¶

16 years ago


If you want to replace characters like "ä" or "ø" you can use mb_ereg_replace, but it is very slow. str_replace is much faster and also works with characters like "ä" or "ø"!

I think this has something to with the fact that str_replace works on byte level and does not care about characters.
I hope that can help.

down

-1

marco at thenetworksolution dot it ¶

10 years ago


To selectively uppercase parts of a string via mb_eregi_replace

    $str = mb_eregi_replace('\b([0-9]{1,4}[a-z]{1,2})\b', "strtoupper
('\\1')", $str, 'e');

Full example, how to fix an address manually typed, uppercasing the first letter of a words and keeping uppercase roman numerals and the letters A,B,C after the house number):

function ucAddress($str) {
// first lowercase all and use the default ucwords
    $str = ucwords(strtolower($str));
// let's fix the default ucwords...
// uppercase letters after house number (was lowercased by the strtolower above)
    $str = mb_eregi_replace('\b([0-9]{1,4}[a-z]{1,2})\b', "strtoupper
('\\1')", $str, 'e');
// the same for roman numerals
    $str = mb_eregi_replace('\bM{0,4}(CM|CD|D?C{0,3})(XC|XL|L?X{0,3})(IX|IV|V?I{0,3})\b', "strtoupper('\\0')", $str, 'e');
    return $str;
}

down

-1

squeegee ¶

18 years ago


well, if you just calculated the length of the find and replace strings once instead of on every loop, it would likely speed it up a lot.

down

-1

mpnicholas [@t] gmail (dot) com ¶

18 years ago


Regarding the mb_str_ireplace() function: I benchmarked it against mb_eregi_replace() for single-character substitution, and it was significantly slower. Despite avoiding the ereg call, I think the while loop ends slowing you down too much for this to be practical.

down

-4

marco at thenetworksolution dot it ¶

10 years ago


To selectively uppercase parts of a string via mb_eregi_replace

    $str = mb_eregi_replace('\b([0-9]{1,4}[a-z]{1,2})\b', "strtoupper
('\\1')", $str, 'e');

Full example, how to fix an address manually typed, uppercasing the first letter of a words and keeping uppercase roman numerals and the letters A,B,C after the house number):

function ucAddress($str) {
// first lowercase all and use the default ucwords
    $str = ucwords(strtolower($str));
// let's fix the default ucwords...
// uppercase letters after house number (was lowercased by the strtolower above)
    $str = mb_eregi_replace('\b([0-9]{1,4}[a-z]{1,2})\b', "strtoupper
('\\1')", $str, 'e');
// the same for roman numerals
    $str = mb_eregi_replace('\bM{0,4}(CM|CD|D?C{0,3})(XC|XL|L?X{0,3})(IX|IV|V?I{0,3})\b', "strtoupper('\\0')", $str, 'e');
    return $str;
}

Dr. Marco Marsala
Network Solution srl
http://www.realizzazionesitigenova.it

down

-4

ms2705335 at gmail dot com ¶

7 years ago


As trng mentioned before you can use \\n for replacement but NOT \\\\n as mentioned in preg_replace docs. So string definition will be like:
$str = '\\1';

add a note