You can have interesting fun debugging anything with sleep() in it if you have a session still active. For example, a page that makes an ajax request, where the ajax request polls a server-side event (and may not return immediately).
If the ajax function doesn't do session_write_close(), then your outer page will appear to hang, and opening other pages in new tabs will also stall.
session_write_close
(PHP 4 >= 4.0.4, PHP 5, PHP 7, PHP 8)
session_write_close — Записывает данные сессии и завершает её
Описание
session_write_close(): bool
Завершает текущую сессию и сохраняет её данные.
Данные сессии обычно сохраняются после завершения выполнения скрипта без необходимости вызова session_write_close(). Поскольку данные сессии заблокированы для предотвращения одновременной конкурирующей записи, только один скрипт может работать с сессией в любой момент времени. Из-за этой блокировки, при использовании фреймов вместе с сессиями, фреймы будут загружаться по очереди один за одним. Можно уменьшить время загрузки всех фреймов путём завершения сессии сразу, как только будут выполнены все необходимые изменения переменных сессии.
Список параметров
У этой функции нет параметров.
Возвращаемые значения
Возвращает true в случае успешного выполнения или false в случае возникновения ошибки.
add a note
User Contributed Notes 27 notes
Anonymous ¶
14 years ago
atul at jreply dot com ¶
11 years ago
An easy gotcha here - the $_SESSIONS superglobal does not vanish because you call session_write_close. If subsequent to the write_close call if you manipulate the superglobal the changes will not be saved when the script exists. Likewise a call to session_regenrate_id will fail.
Closing the session and then manipulating session variables is not something many would do by intent. However, if your sessions suddenly start misbehaving, failing to record changes etc it is well worth checking that the cause is not this one!
sascha at archinform dot de ¶
7 years ago
If You apply session_write_close() to allow concurrent requests from a client (for example simultaneous AJAX calls) this may not resolve the problem, if You have enabled output buffering (default in PHP 7+). You have to set output_buffering = Off in php.ini, otherwise session won't be closed immediately.
web at murray-mint dot co dot uk ¶
15 years ago
If you're saving data to a session but finding it's not actually being saved, check and ensure that you're not assigning any arrays with a key containing the pipe character (|). This will prevent the session data from being serialized and saved.
risaac at deadletter dot com ¶
18 years ago
Workaround if session_write_close() still doesn't write sessions fast enough:
I found with one PHP login system that even session_write_close() was not setting the session variables before I transferred pages with a Location: header. So the user would log in, I would create the $_SESSION variables, call session_write_close() and then transfer to the secure page using header(Location:...). The secure page would check for the session vars, not find them, and force the user to log in again. After the second login the session would be found and they could continue.
My workaround was to create the $_SESSION variables with 0 values before writing the initial login page. Then I updated the session vars with the login results and used the header() function to switch to the secure location. Once the session vars have already been created, updated values are assigned quickly. Problem solved. Just be sure the secure page checks both that the $_SESSION var exists AND that it's not 0.
jcastromail at yahoo dot es ¶
6 years ago
Why this function is highly important? I explain.
In a nutshell, how session works:
Client side: php is sending back to the client, a cookie with the id of the session. So, the session ends when the server ends to process the script and not when session_write_close() is executed. So, using session_write_close() for fast saving the session in the client side is useless unless you are ob_flush() and flush() to the customer.
Server side: It could be changed but the normal behavior is to save the session information in a file. For example:
sess_b2dbfc9ddd789d66da84bf57a62e2000 file
**This file is usually locked**, so if two sessions are trying open at the same time, then one is freezed until the file is unlocked. session_write_close() ends the lock.
For example:
<?php
$t1=microtime(true);
session_start();
sleep(3);
session_write_close();
$t2=microtime(true);
echo $t2-$t1;
?>
If we run this code in two processes (using the same session, such as two tabs), then one will return 3 seconds while the other will return 6 seconds.
Its caused because the first process lock the session file.
However, changing to:
<?php
$t1=microtime(true);
session_start();
session_write_close();
sleep(3);
$t2=microtime(true);
echo $t2-$t1;
?>
both files runs at 3 seconds.
For PHP 7.0 and higher, we could use session_start(true); for auto close after the first read.
This operation is highly important for AJAX when we used to do many operations in parallel by using the the same session
sss at activators dot info ¶
13 years ago
i have been using a mysql database custom session handler (not using cookies) and was having problems getting the session data to be saved consistantly on my database driven website
clients also have to navigate across domains for website management at times so i have some special code to make all this happen relatively seamlessly and to ensure that each person's data is secure.
i added session_write_close() at the very end of the last script that set session data and solved the problem.
i am not sure why, but it seems the calls to write and close were not always being made (i was not smart enough to figure it out)
now that the session_write_close() call is being made, my problems seemed to have disappeared - hopefully for good.
hope this helps someone.
twicejr ¶
7 years ago
You can easily make a cool chatbox without using frames and subdomains in combination with SSE (server side events), using for example a 'while(true){sleep($x)}' loop..
Using session_write_close() prevents the session being locked (because the request 'never' ends (maybe after a minute or two.. but otherwise the page would hang).
So you can make a chatbox without shell access on shared hosting, you just need to make a 'output all clients the new messages' function for the SSE stream and code a few lines of javascript. Read up on SSE.
Obviously need a good caching or fast database with a lot of clients, because everyone will spawn a new stream connection. (in contrast to push mechanisms which will require at least a cron job on shared hosting).
Cheap chatbox.
prophp at gmail dot com ¶
14 years ago
Beware, if you overwrite the default PHP Session handling and use debugging code inside the write() function, the debugging code is not executed until you run session_write_close().
I tried everything, file logging directly from the write() function, global debugging variable increments, static class properties. The only things written were the session open() and read() calls. My debugging code looks like this:
<?php
$Session = new Session();
...
class Session() {
public function write($id)
$sql = "UPDATE ... WHERE id=". mysql_real_escape_string($id);
self::$debug_Info .= "session_write sql=$sql";
...
}
# then at the very end of the script:
# session debugging
session_write_close();
error_log($Session->getDebugInfo(), 3, 'logs/sessions.log');
?>
where getDebugInfo simply returns self::$debug_Info. Without session_write_close() the sessions.log would only contain the open() and read() calls.
Maybe intuitive to many, it took days to realize. hope it helps!
ivan at alexandrov dot biz ¶
16 years ago
I had a problem with realizing the restore password form. First a user entered his login or e-mail in the system.
Then the script searched the database, got the session data, and sended link with SID to registered e-mail. The link was configured so, that it restored session data and logged user in the secure interface to the change password form.
Then was displayed a page with the message about sended message.
The problem was that ID was not unique in three pages, the SID sended to e-mail anyone could see in cookie.
I tryed to start new session before generating and after sending link with the code:
<?php ....
session_start();
/*Getting user login and e-mail from database*/
$user_login = "....";
$user_id = "....."
/*CLOSE PREVIOUS SESSION*/
session_unlink();
session_destroy();
/*NOW GENERATING LINK FOR SESSION DATA */
session_start();
$_SESSION = $user_login;
$_SESSION = $user_id;
/*here generating link:*/
$link = "http://host.com/restore=" . SID . "";
mail (....);
/*CLOSE THE SESSION WITH USER DATA*/
session_write_close();
/*AND STARTING A NEW SESSION*/
session_start();
/*THEN LOAD THE 'MESSAGE SENDED' PAGE*/
header("Location: /restore/message_sended/");
?>
The trouble was that SID was the same even after session_unlink() and session_write_close(). The session_start() function just restored the previous session data!!! So the script was not safe.
Then I added session_regenerate_id() call after each session_start().
<?php ....
session_start();
/*Getting user login and e-mail from database*/
$user_login = "....";
$user_id = "....."
/*CLOSE PREVIOUS SESSION*/
session_unlink();
session_destroy();
/*NOW GENERATING LINK FOR SESSION DATA */
session_start();
session_regenerate_id();//Regenerating SID for sending
$_SESSION = $user_login;
$_SESSION = $user_id;
/*here generating link:*/
$link = "http://host.com/restore=" . SID . "";
mail (....);
/*CLOSE THE SESSION WITH USER DATA*/
session_write_close();
/*AND STARTING ANOTHER NEW SESSION*/
session_start();
session_regenerate_id(); //Regenerating SID
/*THEN LOAD THE 'MESSAGE SENDED' PAGE*/
header("Location: /restore/message_sended/");
?>
And now it works as needed! The SID sending to user we cannot see in cookies nor before neither after generated link, but the data is saved in session with this id. So only the owner of account can get it!
atesin > gmail ¶
4 years ago
i had trouble with 2 concurrent scripts, a login form with a php generated captcha... the latter truncated the session (session file length 0) so the login always failed due token or captcha error... i thought that was a session blocking problem, but was not
<?php // pseudo code
@session_start();
$_SESSION['token'] = $token = random_string();
session_write_close();
?><pseudo html>
<form>
<hidden $token/>
Name : <input name/>
Pass : <input pass/>
Captcha <img captcha.php/> : <input captcha/>
<submit/>
</form>
</html>
<?php // captcha.php pseudo code
$code = random_string();
if ( request_valid() )
{
@session_start();
$_SESSION['captcha|'.$HTTP_REFERER] = $code;
session_write_close();
}
$img = text_to_img($code);
send_img($img);
?>
i choose pipeline as separator in line $_SESSION['captcha|'.$HTTP_REFERER] = $code; because being forbidden in urls "<>[\]^`{|}space
but seems pipeline produced serialization errors on session file, so changing to another inocuous character (underscode in my case) solved the problem... try to avoid reserved serialization characters |:{}";
editorial at literati dot ca ¶
19 years ago
Further to the comment by nakanishi at mailstyle dot com, it appears that calling session_write_close() followed by session_start() causes issues if you have more than one browser window/tab open in the session, and have a large session data array. I have an intermitent (and hard to replicate reliably) issue with session_start() never being called or not returning - the script hangs before the session headers are written. I'm puting this down to trying to be too clever rather than to a bug per se.
noel ¶
16 years ago
I was having the same problem as many here regarding setting session data just before a header location redirect and having the session data just not be there. I tried everything people here said, and none of their combinations worked. What did finally work for me was to fire off a session_regenerate_id(true) call just prior to the header() and die() calls.
session_regenerate_id(true);
header('location: blah blah');
die();
Without the regenerate id call, the write close did not seem to do anything. session_write_close() doesn't seem to matter at all. It certainly didn't fix anything on its own for me.
This is a rather annoying issue with php sessions that I've never run into before. I store my sessions to /dev/shm (which is RAM) so file IO blocking can't be the problem. Now I'm nervous that some other session data might not be getting updated prior to a header() location change, which is extremely important and common in any web app.
unspammable-iain at iaindooley dot com ¶
18 years ago
As we all know, if an object is serialised, then the class definition must be included _before_ it is unserialised.
My framework has an enormous number of class files, and including them all at the beginning of the script was really taking it's toll on my system (memory and execution time) so I switched to including required classes at the top of each class file that used them using require_once.
This caused problems because I start my session at the very beginning of my script's execution, but all my class files aren't there at the beginning!!
So no in my special 'require' function, I do the following:
if(!class_exists($to_require))
{
session_write_close();
require_once('path/to/classes/'.$to_require.'.php');
session_start();
}
This is a considerably smaller performance hit that including every class that the application uses at the very beginning of the application.
bernard dot savonet+ at gmail dot com ¶
12 years ago
Beware of session_write_close when calling PHP scripts from an Ajax page: this does not "finalize" the session data writing, but in fact it resets it!
bkatz at usefulengineering dot com ¶
19 years ago
session_write_close() worked as a lifesaver for me when automatically uploading files to a user (forcing a download instead of a link). If files are large, and since session_start() does not allow another page using session_start() to proceed until it's done, i was not able to upload more than one file at a time. By using session_write_close() before beginning the file upload, my users can now download as many big files as they like, at the same time. Example:
<?
session_start();
/* Do session stuff here; security; logging; etc. */
session_write_close();
/* NOW write out the requested file. */
header("Content-type: audio/x-mpeg"); /* or whatever type */
header("Content-Disposition: attachment; filename=" . $filename);
header("Content-Length: " . $filesize);
header("Content-Transfer-Encoding: binary\n\n");
header("Pragma: no-cache");
header("Expires: 0");
$file_contents = file_get_contents($filepath);
print($file_contents);
?>
kent openit se ¶
16 years ago
When trying to use exec on Windows 2003 Server together with WAMP you probably will experience that the server stops to answer your requests.
Through calling session_write_close before -every- exec this will solve your problem.
Hope this will help someone!
nakanishi at mailstyle dot com ¶
21 years ago
Make sure that you call session_start() again after session_write_close() if you rely on the SID rewriting. Otherwise it will not be rewritten.
tyler at n49 dot com ¶
17 years ago
Along the same lines as what cenaculo at netcabo dot pt, bkatz at usefulengineering dot com, and editorial at literati dot ca said about making sure you session_write_close(), don't forget to ob_end_flush() if you're using output buffering.
I've been having some weird hanging issues when I tried to navigate away from a page with content streaming in an Iframe or a separate window.
Instead of:
<?
ob_start();
session_start();
/* Do session stuff here; security; logging; etc. */
session_write_close();
/* NOW write out the requested file. */
header("Content-type: audio/x-mpeg"); /* or whatever type */
header("Content-Disposition: attachment; filename=" . $filename);
header("Content-Length: " . $filesize);
header("Content-Transfer-Encoding: binary\n\n");
header("Pragma: no-cache");
header("Expires: 0");
$file_contents = file_get_contents($filepath);
print($file_contents);
?>
Do:
<?
ob_start();
session_start();
/* Do session stuff here; security; logging; etc. */
session_write_close();
/* Make sure data is actually flushed out to the browser */
ob_end_flush();
/* NOW write out the requested file. */
header("Content-type: audio/x-mpeg"); /* or whatever type */
header("Content-Disposition: attachment; filename=" . $filename);
header("Content-Length: " . $filesize);
header("Content-Transfer-Encoding: binary\n\n");
header("Pragma: no-cache");
header("Expires: 0");
$file_contents = file_get_contents($filepath);
print($file_contents);
?>
yacine at wasabihawaii dot com ¶
16 years ago
My sessions were screwing up because I had 2 different session IDs going at once:
- 1 PHPSESSID cookie for domain.com
- 1 PHPSESSID cookie for www.domain.com
This fixed it:
//At the beginning of each page...
session_set_cookie_params (1800,"/","domain.com");
session_start();
steve at dot-totally dot co dot uk ¶
17 years ago
For the session problem when using header("Location:..."), I found session_write_close() not to help me on the my IIS server using PHP in CGI mode. The problem was the PHPSESSID cookie was never being set, so I did it the manual way:
header("Set-Cookie: PHPSESSID=" . session_id() . "; path=/");
Worked for me this way!
burak >>>at ¶
16 years ago
I had a similar problem with session data.
I lost the session data randomly, without any pattern. I didn't even use the header(location:... ) function.
Tried:
set "session.use_cookies" to 1 in php.ini
session-write-close()
ob_start() / ob_end_flush()
No matter what I did, it didn't worked.
Finally, when I set the "session.use_only_cookies" to 1, problem is solved. I am no longer losing any sessions.
cottoANTISPAM at ori dot org ¶
17 years ago
This function is useful for forcing serialization of session data but it can introduce difficult-to-track bugs if it's called more than once per session_start() call. Since it doesn't have a return value or raise an exception there won't be any indication that the serialization failed and the code will continue normally. Only when a user visits a page that depends on unsaved session data will there be any indication of the failure.
As far as I can tell this affects both the default and custom session handling functions.
<?
session_start();
$_SESSION['foo'] = 'box';
session_write_close();
if (array_key_exists('visited',$_SESSION) {
echo "welcome back!\n"; # will never happen
} else {
echo "I don't know you.\n";
$_SESSION['visited'] = true;
session_write_close();
}
?>
kumar mcmillan ¶
20 years ago
if you are trying to work with a larger code base meant for a specific application... and it implements some custom session save handlers, it appears there is no way to reset those save handlers back to the default php state if they are getting in your way. my workaround:
session_write_close(); // close the session at the top of the page :)
joadha at gmail dot com ¶
13 years ago
Remember: objects with private and/or protected data members cannot be serialized properly by PHP. If you ever find that you are missing some objects from your $_SESSION, make sure you are accounting for this shortcoming in your application.
martyrs_cry at hotmail dot com ¶
15 years ago
Using a SQL Server database and Windows Server 2003, if you use session_write_close() prior to a header() call, and it still appears to freeze up your session, check to make sure that you are not in the middle of a transaction.
I noticed that by starting a transaction, executing some queries, attempting to write close the session and then redirecting without rolling back or committing that transaction, your session may freeze up. Just like what you may experience if you attempt to redirect with header() without first calling session_write_close().
luiscardoso at cardosotech dot com ¶
6 years ago
When the server receives multiple requests the change made by the 2nd request on the session variable (while the 1st request is sleeping) won't be available to the 1st request after it has applied session_write_close()
<?php
session_start();
// each request sends its own value
$sign = filter_input(INPUT_GET, 'sign', FILTER_SANITIZE_STRING);
$_SESSION['sign'] = $sign;
session_write_close();
// During the sleep period of 1st request, a 2nd request arrives with a different value of $sign
sleep(3);
// each request will show a different value, even though $_SESSION['sign'] was changed by the 2nd request before 1st request has reached this line
echo $_SESSION['sign'];
?>
Solution, session_start() before echo
<?php
session_start();
// each request sends its own value
$sign = filter_input(INPUT_POST, 'sign', FILTER_SANITIZE_STRING);
$_SESSION['sign'] = $sign;
session_write_close();
// During the sleep period of 1st request, a 2nd request arrives with a different value of $sign
sleep(3);
/** this will solve the problem **/
session_start();
// now both requests show the same value, which is the latest value, changed by the 2nd request
echo $_SESSION['sign'];
// you might apply session_write_close(), if you plan to write more code hereafter
?>
