<?php
// we wanted the output of only selected array_keys from a big array from a csv-table
// with different order of keys, with optional suppressing of empty or unused values
$values = array
(
'Article'=>'24497',
'Type'=>'LED',
'Socket'=>'E27',
'Dimmable'=>'',
'Wattage'=>'10W'
);
$keys = array_fill_keys(array('Article','Wattage','Dimmable','Type','Foobar'), ''); // wanted array with empty value
$allkeys = array_replace($keys, array_intersect_key($values, $keys)); // replace only the wanted keys
$notempty = array_filter($allkeys, 'strlen'); // strlen used as the callback-function with 0==false
print '<pre>';
print_r($allkeys);
print_r($notempty);
/*
Array
(
[Article] => 24497
[Wattage] => 10W
[Dimmable] =>
[Type] => LED
[Foobar] =>
)
Array
(
[Article] => 24497
[Wattage] => 10W
[Type] => LED
)
*/
?>
array_replace
(PHP 5 >= 5.3.0, PHP 7, PHP 8)
array_replace — İlk dizinin elemanlarını aktarılan dizilerden günceller
Açıklama
dizi dizisinin değerlerini belirtilen diğer
dizilerin değerleriyle günceller. İlk dizideki bir anahtar ikinci dizide
mevcutsa ilk dizideki değer ikinciden güncellenir. İkinci dizide olup ilk
dizide olmayan anahtarlar ilk dizide oluşturulur. Sadece ilk dizide
bulunan anahtarların değerlerine dokunulmaz. Birden fazla güncelleyici
dizi belirtilmişse diziler sırayla işlenir; yani sonraki dizideki
değerler daima üste yazar.
array_replace() ardışık işlem yapmaz; ikinci dizide ne varsa ilkini onunla günceller.
Bağımsız Değişkenler
-
dizi -
Elemanları güncellenecek dizi.
-
diziler -
İlk diziyi güncelleyecek diziler. Sonraki dizilerin değerleri öncekilerin değerlerini geçersiz kılar.
Dönen Değerler
Bir dizi döner.
Örnekler
Örnek 1 - array_replace() örneği
<?php
$esas = array("portakal", "muz", "elma", "armut");
$ikame = array(0 => "karpuz", 4 => "kavun");
$ikame2 = array(0 => "kiraz");
$sepet = array_replace($esas, $ikame, $ikame2);
print_r($sepet);
?>Yukarıdaki örneğin çıktısı:
Array
(
[0] => kiraz
[1] => muz
[2] => elma
[3] => armut
[4] => kavun
)
Ayrıca Bakınız
- array_replace_recursive() - İlk dizinin elemanlarını aktarılan dizilerden ardışık olarak günceller
- array_merge() - Belirtilen dizileri ardarda ekleyerek yeni bir dizi oluşturur
add a note
User Contributed Notes 15 notes
steelpandrummer ¶
12 years ago
marvin_elia at web dot de ¶
10 years ago
Simple function to replace array keys. Note you have to manually select wether existing keys will be overrided.
/**
* @param array $array
* @param array $replacements
* @param boolean $override
* @return array
*/
function array_replace_keys(array $array, array $replacements, $override = false) {
foreach ($replacements as $old => $new) {
if(is_int($new) || is_string($new)){
if(array_key_exists($old, $array)){
if(array_key_exists($new, $array) && $override === false){
continue;
}
$array[$new] = $array[$old];
unset($array[$old]);
}
}
}
return $array;
}
mail at romansklenar dot cz ¶
14 years ago
To get exactly same result like in PHP 5.3, the foreach loop in your code should look like:
<?php
...
$count = func_num_args();
for ($i = 1; $i < $count; $i++) {
...
}
...
?>
Check on this code:
<?php
$base = array('id' => NULL, 'login' => NULL, 'credit' => NULL);
$arr1 = array('id' => 2, 'login' => NULL, 'credit' => 5);
$arr2 = array('id' => NULL, 'login' => 'john.doe', 'credit' => 100);
$result = array_replace($base, $arr1, $arr2);
/*
correct output:
array(3) {
"id" => NULL
"login" => string(8) "john.doe"
"credit" => int(100)
}
your output:
array(3) {
"id" => int(2)
"login" => NULL
"credit" => int(5)
}
*/
?>
Function array_replace "replaces elements from passed arrays into the first array" -- this means replace from top-right to first, then from top-right - 1 to first, etc, etc...
ali dot sweden19 at yahoo dot com ¶
8 years ago
Here is a simple array_replace_keys function:
/**
* This function replaces the keys of an associate array by those supplied in the keys array
*
* @param $array target associative array in which the keys are intended to be replaced
* @param $keys associate array where search key => replace by key, for replacing respective keys
* @return array with replaced keys
*/
private function array_replace_keys($array, $keys)
{
foreach ($keys as $search => $replace) {
if ( isset($array[$search])) {
$array[$replace] = $array[$search];
unset($array[$search]);
}
}
return $array;
}
// Test Drive
print_r(array_replace_keys(['one'=>'apple', 'two'=>'orange'], ['one'=>'ett', 'two'=>'tvo']);
// Output
array(
'ett'=>'apple',
'tvo'=>'orange'
)
gmastro77 at gmail dot com ¶
11 years ago
In some cases you might have a structured array from the database and one
of its nodes goes like this;
<?php
# a random node structure
$arr = array(
'name' => 'some name',
'key2' => 'value2',
'title' => 'some title',
'key4' => 4,
'json' => '[1,0,1,1,0]'
);
# capture these keys values into given order
$keys = array( 'name', 'json', 'title' );
?>
Now consider that you want to capture $arr values from $keys.
Assuming that you have a limitation to display the content into given keys
order, i.e. use it with a vsprintf, you could use the following
<?php
# string to transform
$string = "<p>name: %s, json: %s, title: %s</p>";
# flip keys once, we will use this twice
$keys = array_flip( $keys );
# get values from $arr
$test = array_intersect_key( $arr, $keys );
# still not good enough
echo vsprintf( $string, $test );
// output --> name: some name, json: some title, title: [1,0,1,1,0]
# usage of array_replace to get exact order and save the day
$test = array_replace( $keys, $test );
# exact output
echo vsprintf( $string, $test );
// output --> name: some name, json: [1,0,1,1,0], title: some title
?>
I hope that this will save someone's time.
sun at drupal dot org ¶
13 years ago
Instead of calling this function, it's often faster and simpler to do this instead:
<?php
$array_replaced = $array2 + $array1;
?>
If you need references to stay intact:
<?php
$array2 += $array1;
?>
polecat at p0lecat dot com ¶
13 years ago
I got hit with a noob mistake. :)
When the function was called more than once, it threw a function redeclare error of course. The enviroment I was coding in never called it more than once but I caught it in testing and here is the fully working revision. A simple logical step was all that was needed.
With PHP 5.3 still unstable for Debian Lenny at this time and not knowing if array_replace would work with multi-dimensional arrays, I wrote my own. Since this site has helped me so much, I felt the need to return the favor. :)
<?php
// Polecat's Multi-dimensional array_replace function
// Will take all data in second array and apply to first array leaving any non-corresponding values untouched and intact
function polecat_array_replace( array &$array1, array &$array2 ) {
// This sub function is the iterator that will loop back on itself ad infinitum till it runs out of array dimensions
if(!function_exists('tier_parse')){
function tier_parse(array &$t_array1, array&$t_array2) {
foreach ($t_array2 as $k2 => $v2) {
if (is_array($t_array2[$k2])) {
tier_parse($t_array1[$k2], $t_array2[$k2]);
} else {
$t_array1[$k2] = $t_array2[$k2];
}
}
return $t_array1;
}
}
foreach ($array2 as $key => $val) {
if (is_array($array2[$key])) {
tier_parse($array1[$key], $array2[$key]);
} else {
$array1[$key] = $array2[$key];
}
}
return $array1;
}
?>
[I would also like to note] that if you want to add a single dimensional array to a multi, all you must do is pass the matching internal array key from the multi as the initial argument as such:
<?php
$array1 = array( "berries" => array( "strawberry" => array( "color" => "red", "food" => "desserts"), "dewberry" = array( "color" => "dark violet", "food" => "pies"), );
$array2 = array( "food" => "wine");
$array1["berries"]["dewberry"] = polecat_array_replace($array1["berries"]["dewberry"], $array2);
?>
This is will replace the value for "food" for "dewberry" with "wine".
The function will also do the reverse and add a multi to a single dimensional array or even a 2 tier array to a 5 tier as long as the heirarchy tree is identical.
I hope this helps atleast one person for all that I've gained from this site.
lm713 ¶
10 years ago
If the arrays are associative (that is, their keys are strings), then I believe this function is identical to (the older) array_merge.
kyberprizrak ¶
10 years ago
if(!function_exists('array_replace'))
{
function array_replace()
{
$args = func_get_args();
$num_args = func_num_args();
$res = array();
for($i=0; $i<$num_args; $i++)
{
if(is_array($args[$i]))
{
foreach($args[$i] as $key => $val)
{
$res[$key] = $val;
}
}
else
{
trigger_error(__FUNCTION__ .'(): Argument #'.($i+1).' is not an array', E_USER_WARNING);
return NULL;
}
}
return $res;
}
}
ricardophp yahoocombr ¶
2 years ago
Concerning the affirmation:
If you want to append array elements from the second array to the first array while not overwriting the elements from the first array and not re-indexing, use the + array union operator
Clearing the fact (it means ...):
If the first array have a key and a value it will not be overlap by the new array. therefore if you have an array like [1=>"alpha", 2=>"beta"] and you got a new array telling [1=>"Alpha", 3=>"Gamma"] the final array will be [1=>"alpha", 2=>"beta", 3=>"Gamma"]. The values of first array will not be modified in the result array.
So, if you are building a concatenation array where the values sometimes overlaps each other keys and you must preserve values you better use array_merge instead "plus" sign
projacore at gmail dot com ¶
9 years ago
You can also use:
<?php
$myarray = [
"Orange",
"572" => "Banana",
"omg" => "Chili",
"nevermind" => "mango"
];
$myarray[0] = "NO-Orange";
$myarray["572"] = "BANANAPHONE!!!";
$myarray["omg"] = "NO-Chili";
print_r($myarray);
?>
RESULT:
Array
(
[0] => NO-Orange
[572] => BANANAPHONE!!!
[omg] => NO-Chili
[nevermind] => mango
)
with regards
polecat at p0lecat dot com ¶
13 years ago
I would like to add to my previous note about my polecat_array_replace function that if you want to add a single dimensional array to a multi, all you must do is pass the matching internal array key from the multi as the initial argument as such:
$array1 = array( "berries" => array( "strawberry" => array( "color" => "red", "food" => "desserts"), "dewberry" = array( "color" => "dark violet", "food" => "pies"), );
$array2 = array( "food" => "wine");
$array1["berries"]["dewberry"] = polecat_array_replace($array1["berries"]["dewberry"], $array2);
This is will replace the value for "food" for "dewberry" with "wine".
The function will also do the reverse and add a multi to a single dimensional array or even a 2 tier array to a 5 tier as long as the heirarchy tree is identical.
I hope this helps atleast one person for all that I've gained from this site.
Anonymous ¶
9 years ago
The documentation is wrongly phrased: "array_replace() replaces the values of array1" No replacing is done. A new array is created which looks like the one that would have resulted from the described replacement.
If you want to augment the set of indices in an array, use
array_to_be_modified += array_with_indices_to_add;
tufan dot oezduman at googlemail dot com ¶
15 years ago
a little enhancement to dyer85 at gmail dot com's function below:
<?php
if (!function_exists('array_replace'))
{
function array_replace( array &$array, array &$array1, $filterEmpty=false )
{
$args = func_get_args();
$count = func_num_args()-1;
for ($i = 0; $i < $count; ++$i) {
if (is_array($args[$i])) {
foreach ($args[$i] as $key => $val) {
if ($filterEmpty && empty($val)) continue;
$array[$key] = $val;
}
}
else {
trigger_error(
__FUNCTION__ . '(): Argument #' . ($i+1) . ' is not an array',
E_USER_WARNING
);
return NULL;
}
}
return $array;
}
}
?>
this will allow you to "tetris-like" merge arrays:
<?php
$a= array(
0 => "foo",
1 => "",
2 => "baz"
);
$b= array(
0 => "",
1 => "bar",
2 => ""
);
print_r(array_replace($a,$b, true));
?>
results in:
Array
(
[0] => foo
[1] => bar
[2] => baz
)
ivijan dot stefan at gmail dot com ¶
8 years ago
If you work on some realy old server below PHP5 you can use array_merge like "necessary evil" to replace values in array:
Here is example how you can use this:
<?php
if(function_exists("array_replace") && version_compare(phpversion(), '5.3.0', '>='))
$data = array_replace($array1, $array2); // (PHP 5 >= 5.3.0)
else
$data = array_merge($array1, $array2); // (PHP 5 < 5.3.0)
var_dump($data);
?>
This can also help someplugin developers to cover some old PHP versions.
