I worked a lot with IMAP functions since I wrote a complete webmail and I've got a little tip about the imap_sort function :
There is a big difference between :
<?php
imap_sort($imap, SORTDATE, 1);
// and
imap_sort($imap, SORTARRIVAL, 1);
?>
The first command will issue a
>> FETCH 1:last (UID ENVELOPE BODY.PEEK[HEADER.FIELDS (Newsgroups Content-MD5 Content-Disposition Content-Language Content-Location Followup-To References)] INTERNALDATE RFC822.SIZE FLAGS)
While the second resulted in
>> FETCH 1:last (UID INTERNALDATE RFC822.SIZE FLAGS)
As a result, using SORTDATE took 3 seconds longer to complete on a 800-emails mailbox, while the results are quite the same (except if you have to deal with forged dates or timezones, but the arrival order is far more logical)
My advice if you sort your emails by arrival is to actually use SORTARRIVAL, or better don't use imap_sort and go straight with message numbers (not UIDs). On large mailboxes, if you display messages per page, you will have significant performance increases (by avoiding 5 seconds of sorting).
imap_sort
(PHP 4, PHP 5, PHP 7, PHP 8)
imap_sort — İletileri sıralar ve döndürür
Açıklama
imap_sort(
IMAP\Connection
int
bool
int
?string
?string
): array|false
IMAP\Connection
$imap,int
$kural,bool
$tersine,int
$seçenekler = 0,?string
$arama_kuralı = null,?string
$karküm = null): array|false
Belirtilen bağımsız değişkenlere göre iletileri sıralar ve döndürür.
Bağımsız Değişkenler
-
imap -
IMAP\Connection nesnesi.
-
kural -
Şunlardan sadece biri belirtilebilir:
-
SORTDATE- İleti tarihi -
SORTARRIVAL- Geliş tarihi -
SORTFROM-İlk Kimden adresindeki posta kutusu -
SORTSUBJECT- İleti konusu -
SORTTO- İlk Kime adresindeki posta kutusu -
SORTCC- İlk Karbon Kopya adresindeki posta kutusu -
SORTSIZE- Sekizlik olarak ileti uzunluğu
-
-
tersine -
1 atanırsa sıralama ters yönde yapılır.
-
seçenekler -
Aşağıda, lazım olanlardan oluşan bir bit maskesi olarak belirtilir:
-
SE_UID- Sıra numarası yerine eşsiz kimlikler döner. -
SE_NOPREFETCH- Arama yapılacak iletiler önce alınmaz.
-
-
arama_kuralı -
IMAP2 biçemi arama kuralı dizgesi. Ayrıntılar için bkz: imap_search()
-
karküm -
Dizgeleri sıralamakta kullanılacak MIME karakter kümesi.
Dönen Değerler
Belirtilen bağımsız değişkenlere göre sıralanmış olarak bir ileti dizisi
döner, başarısızlık durumunda false döner.
Sürüm Bilgisi
| Sürüm: | Açıklama |
|---|---|
| 8.1.0 |
imap bağımsız değişkeni artık
IMAP\Connection nesnesi kabul ediyor, evvelce
resource türünde geçerli bir imap değeri
kabul ederdi.
|
| 8.0.0 |
tersine artık int değil
bool türünde.
|
| 8.0.0 |
arama_kuralı ve karküm
artık null olabiliyor.
|
add a note
User Contributed Notes 7 notes
antoine dot spam-nono at maxg dot info ¶
18 years ago
boscolau at mac dot com ¶
19 years ago
in reply to graham_NOSPAM at rdb-concepts dot NOSPAM dot co dot uk here is a more elegant way to achieve sorting of search results:
function order_search($searchresults, $sortresults) {
return array_values(array_intersect($sortresults,$searchresults));
}
example of using function:
$sortresults = imap_sort($stream, $sort, $sortorder);
$searchresults = imap_search($stream, $query);
$sorted_search_results = order_search($searchresults, $sortresults);
sorted version of search results will then be held in the array of $sorted_search_results.
persian-horde at metanetworking dot com ¶
19 years ago
imap_sort uses the c-client library to sort messages. This library currently does not
support locale-based sort for foreign languages (Although it has charset option).
They are working on this(http://www.washington.edu/imap/IMAP-FAQs/#1.12),
but you can use the following function which uses strcoll() for locale-based sorting.
Pease note that this is required for SUBJECT field sorting, because most of
other fields are sorted correctly by imap_sort in any locale:
function imap_locale_sort($stream,$criteria,$reverse,$locale,$options)
{
if ($criteria!=SORTSUBJECT)
return (imap_sort($stream,$criteria,$reverse,$options));
$unsorted = array();
$sortresult = array();
$MC=imap_check($stream);
$MN=$MC->Nmsgs;
$overview = imap_fetch_overview($stream,"1:$MN",0);
$k=0;
while( list($key,$val) = each($overview))
{
$unsorted[$k]["uid"]=$val->uid;
$unsorted[$k]["subject"]=MIME::decode($val->subject, NLS::getCharset());
$k++;
}
usort ($unsorted, create_function('$a,$b','setlocale(LC_ALL,$locale);return strcoll($a["subject"],$b["subject"]);'));
for ($m=0;$m<count($unsorted);$m++)
array_push($sortresult,$unsorted[$m]["uid"]);
if ($reverse)
$sortresult = array_reverse($sortresult);
return $sortresult;
}
Usage example:
$sorted = imap_locale_sort($stream,SORTSUBJECT,0,'fa_IR',0);
tilmauder at yahoo dot com ¶
20 years ago
in response to fprado's problem, the solution would be to use array_multisort() function on imap_fetchheader(). sdavey at datalink dot net dot au wrote an excellent example under array_multisort. I have used it to sort POP3 by message size. Unfortunately, my code is much too convoluted to post it here.
persian-horde at metanetworking dot com ¶
19 years ago
Hello,
We used MIME and NLS libraries in our previous code(imap_locale_sort) that
are part of PEAR and Horde projects, and so our function
was so specific. Here is the general (pure php) code for this
function:
function imap_locale_sort($stream,$criteria,$reverse,$locale,$options)
{
if ($criteria!=SORTSUBJECT)
return (imap_sort($stream,$criteria,$reverse,$options));
$unsorted = array();
$sortresult = array();
$MC=imap_check($stream);
$MN=$MC->Nmsgs;
$overview = imap_fetch_overview($stream,"1:$MN",0);
$k=0;
while( list($key,$val) = each($overview))
{
$unsorted[$k]["uid"]=$val->uid;
$unsorted[$k]["subject"]=imap_utf8($val->subject);
$k++;
}
usort ($unsorted, create_function('$a,$b','setlocale(LC_ALL,$locale);return strcoll($a["subject"],$b["subject"]);'));
for ($m=0;$m<count($unsorted);$m++)
array_push($sortresult,$unsorted[$m]["uid"]);
if ($reverse)
$sortresult = array_reverse($sortresult);
return $sortresult;
}
Sample usage:
$mbox = imap_open("{localhost:143}INBOX.sent-mail","userid","password");
if ($mbox)
echo ("Connection Successful!");
$sorted = imap_locale_sort($mbox,SORTSUBJECT,0,'fa_IR',0);
print_r($sorted);
print ("\n\n");
$sorted = imap_sort($mbox,SORTSUBJECT,SE_UID);
print_r($sorted);
imap_close($mbox);
fprado at pmovil dot com dot br ¶
22 years ago
I use imap_sort() to go through POP3 accounts. However, sometimes, when the mailbox is too large, the response is incredibly slow.
I tried sniffing the network to discover the source of the problem and found that when imap_sort() is called for a POP3 server, it downloads the full body & attachs of ALL the messages in the mailbox. Since my POP server and my Web server are on differente machines, this caused the considerably slow response.
I've been trying a work-around this issue and if I manage to do this I'll post it here.
graham_NOSPAM at rdb-concepts dot NOSPAM dot co dot uk ¶
22 years ago
for those of you with an old version of PHP that doesn't support the extra search paramater you may want to use this function:
function order_search($searchresults, $sortresults) {
$searchhash = array();
$returnresults = array();
$count = 0;
for ($i = 0; $i < sizeof($searchresults); $i++) {
$searchhash[$searchresults[$i]] = true;
}
for ($i = 0; $i < sizeof($sortresults); $i++) {
if (@$searchhash[$sortresults[$i]]) {
$returnresults[$count] = $sortresults[$i];
$count++;
}
}
return $returnresults;
}
example of using function:
$sortresults = imap_sort($stream, $sort, $sortdir, SE_UID);
$searchresults = imap_search($stream, $search, SE_UID);
$results = order_search($searchresults, $sortresults);
$results will then hold a sorted array of search results.
