sscanf

(PHP 4 >= 4.0.1, PHP 5, PHP 7, PHP 8)

sscanf — Girdi dizgesini belli bir biçeme göre yorumlar

Açıklama

sscanf(string $dizge, string $biçem, mixed &...$değişkenler): array|int|null

sscanf() işlevi, printf() işlevinin tersine çıktıyı biçemlemek yerine girdiyi bir biçeme göre çözümler. sscanf() belirtilen dizge dizgesini okur ve biçem dizgesine göre bu dizgeyi yorumlar.

Biçem dizgesindeki herhangi bir boşluk karakteri girdi dizgesindeki herhangi bir boşluk karakteriyle eşleşir. Yani, biçem dizgesindeki bir sekme karakteri (\t) girdi dizgesindeki tek bir boşluk karakteri ile eşleşebilir.

Bağımsız Değişkenler

dizge

Yorumlanacak dizge.

biçem

Girdi dizgesinin yorumlanmasında kullanılan bu dizge ile ilgili ayrıntılar aşağıdaki farklar dışında sprintf() işlevinin belgesinde açıklanmıştır:

İşlev yerele duyarlı değildir.
F, g, G and b desteklenmez.
D ondalık sayı anlamına gelir.
i taban algılamalı tamsayı anlamına gelir.
n şimdiye kadar işlenen karakter sayısı anlamına gelir.
s herhangi bir boşluk karakterinde okumayı durdurur.
dğşnum$ yerine * bu dönüştürme belirtiminin atamasını baskılar.

değişkenler

Çözümlenen değerleri içermek üzere aktarımı isteğe bağlı gönderimli değişkenler.

Dönen Değerler

İşleve sadece iki bağımsız değişken aktarılmışsa, çözümlenen değerler bir dizi içinde döndürülür. İsteğe bağlı bağımsız değişkenler belirtilmişse işlev bu bağımsız değişkenlere atanan değer sayısını döndürür. İsteğe bağlı bağımsız değişkenlerin gönderimli olarak aktarılmaları gerekir.

biçem, dizge içinde bulunandan daha fazla alt dizge bekliyorsa, null döndürülür.

Örnekler

Örnek 1 - sscanf() örneği

<?php
// Seri numarasını döndürelim
list($serial) = sscanf("SN/2350001", "SN/%d");
// üretim tarihini de döndürelim
$mandate = "January 01 2000";
list($month, $day, $year) = sscanf($mandate, "%s %d %d");
echo "$serial numaralı mal şu tarihte üretildi: $year-" .
      substr($month, 0, 3) . "-$day\n";
?>

İşleve isteğe bağlı bağımsız değişkenler belirtilmişse işlev bu bağımsız değişkenlere atanan değer sayısını döndürür.

Örnek 2 - Seçimlik bağımsız değişkenlerle sscanf() kullanımı

<?php
// Yazar bilgisiyle bir DocBook girdisi üretelim
$auth = "24\tLewis Carroll";
$n = sscanf($auth, "%d\t%s %s", $id, $first, $last);
echo "<author id='$id'>
    <firstname>$first</firstname>
    <surname>$last</surname>
</author>\n";
?>

Ayrıca Bakınız

printf() - Biçemli bir dizge çıktılar
sprintf() - Biçemli bir dizge döndürür
fprintf() - Biçemli dizgeyi bir akıma yazar
vprintf() - Biçemli bir dizge çıktılar
vsprintf() - Biçemli bir dizge döndürür
vfprintf() - Biçemli dizgeyi bir akıma yazar
fscanf() - Bir dosyadaki girdiyi belli bir biçeme göre çözümler
number_format() - Sayıyı binlik bölümlere ayırır
date() - Unix zaman damgasını biçimlendirir

add a note

User Contributed Notes 18 notes

down

jon at fuck dot org ¶

22 years ago


this function is a great way to get integer rgb values from the html equivalent hex.

list($r, $g, $b) = sscanf('00ccff', '%2x%2x%2x');

down

elgabos at umail dot ucsb dot edu ¶

22 years ago


After playing around with this for a while, I found that if you use %[^[]] instead of %s (since php has problems with spaces when using %s) it works nicely. 

For those that aren't familiar with regular expressions, %[^[]] basically matches anything that isn't nothing.

Hope this helps. - Gabe

down

mikewillitsgmail.com ¶

16 years ago


FYI - if you are trying to scan from a string which contains a filename with extension. For instance:

<?php

$out = sscanf('file_name.gif', 'file_%s.%s', $fpart1, $fpart2);

?>

The scanned string in the $fpart1 parameter turns out to be 'name.gif' and $fpart2 will be NULL.

To get around this you can simply replace the "." with a space or another "white-space like" string sequence.

I didn't see any other comments on regarding string literals which contain a '.' so I thought I'd mention it. The subtle characteristics of having "white-space delimited" content I think can be a source of usage contention. Obviously, another way to go is regular expressions in this instance, but for newer users this may be helpful.

Just in case someone else spent 10 minutes of frustration like I did. This was seen on PHP Version 5.2.3-1ubuntu6.3.

Searching the bug reports shows another users misunderstanding: http://bugs.php.net/bug.php?id=7793

down

Brainiac361 ¶

19 years ago


The %[^[]]-trick may seem to work, but it doesn't!

What happens is that sscanf will simply match any characters but an opening square bracket (which is rather rare and that's why it might just seem to work).
But even worse it will expect a ]-character next and continue to match anything.

Now what you can do is make sscanf look for any character but a character that is really never used... a good choice is the linebreak "%[^\\n]", especially in combination with fscanf.

What you can also do is copy and paste any unused ascii character like #001 or something.

down

leg ¶

16 years ago


@mikewillitsgmail.com:

<?php

$out = sscanf('file_name.gif', 'file_%[^.].%s', $fpart1, $fpart2);

echo '<pre>';
print_r($fpart1);
echo '<hr />';
print_r($fpart2);
echo '</pre>';

?>

output:

name
-
gif

The "^." part avoid the first searched string to be too greedy. But doesn't protect you against an "file_test.name.gif" input, with bad results!

down

Victor ¶

12 years ago


One thing to note: unlike C/C++, a variable %n is assigned to will be counted in the return value.

down

Vincent Jansen ¶

19 years ago


If you just wants filter out information between two parts of a string, i used the following, it works better for me then the sscanf function. 

<?php
function scanstr($zoekstr,$part1,$part2) {
$firstpos=strpos ($zoekstr, $part1)+strlen($part1);
$lastpos=strpos ($zoekstr, $part2);
$scanresult=substr ($zoekstr, $firstpos, $lastpos-$firstpos);
    return($scanresult);
}
echo scanstr ("var1=hello&var2=test&var3=more","var2=","&var3");
?>

down

anonymouse ¶

18 years ago


I've seen several examples of people using brackets to define what look like regexp character classes. In my limited testing I don't think they are genuine character classes but they seem to be similar.

My task was to use sscanf() to parse an array of strings with the format:

number SPACE string_which_may_also_have_spaces

The normal %s conversion command treats spaces as some kind of delimiter. So, you can get the strings if you know beforehand how many "words" there will be. But, my input was variable.

Here's what I came up with: (note use of the dollar-sign 'end of string' hidden delimiter)

sscanf($string_to_parse,'%d %[^$]s',$num,$text);

This conversion command says "look for an integer, then a space, then any string up to the end of the string"

down

codeslinger at compsalot dot com ¶

19 years ago


Security Note:

Although it is a very powerful technique, keep in mind that it is easily deceived.

Many successful exploits have been based on scanf attacks.  It should not be used on untrusted input without a lot of additional validation.

down

skeltoac ¶

18 years ago


To parse a line from an Apache access log in common format:

<?php
$log = array();
$n = sscanf(trim($line), '%s %s %s [%[^]]] "%s %s %[^"]" %d %s "%[^"]" "%[^"]"',
    $log['ip'],
    $log['client'],
    $log['user'],
    $log['time'],
    $log['method'],
    $log['uri'],
    $log['prot'],
    $log['code'],
    $log['bytes'],
    $log['ref'],
    $log['agent']
);
?>

down

narainsbrain at yahoo dot com ¶

23 years ago


apparently, sscanf always splits at spaces, even if spaces are not specified in the format. consider this script:



<?php

$str = "This is a\tsentence with\ttabs";

$scanned = sscanf($str, "%s\t%s\t%s");

echo join(" : ", $scanned);

?>



this echoes "This : is : a", not the expected "This is a : sentence with : tabs."

this behaviour is fine if your strings don't contain spaces, but if they do you'd be better off using explode().

down

Philo ¶

4 years ago


It should also be noted that when used with sscanf both x and X produce the same output (i.e. they are case-insensitive).

<?php
var_dump(sscanf("0xdead|0XDEAD", "%X|%x")); // works

down

joshmckenneyATgmailDOT(0{ ¶

19 years ago


added country code (1) to phone number function:

function formatPhone($phone) {
       if (empty($phone)) return "";
       if (strlen($phone) == 7)
               sscanf($phone, "%3s%4s", $prefix, $exchange);
       else if (strlen($phone) == 10)
               sscanf($phone, "%3s%3s%4s", $area, $prefix, $exchange);
       else if (strlen($phone) > 10)
               if(substr($phone,0,1)=='1') {
                                 sscanf($phone, "%1s%3s%3s%4s", $country, $area, $prefix, $exchange);
                             }
                             else{
                                 sscanf($phone, "%3s%3s%4s%s", $area, $prefix, $exchange, $extension);
                                }
       else
               return "unknown phone format: $phone";
       $out = "";
       $out .= isset($country) ? $country.' ' : '';
       $out .= isset($area) ? '(' . $area . ') ' : '';
       $out .= $prefix . '-' . $exchange;
       $out .= isset($extension) ? ' x' . $extension : '';
       return $out;
}

down

-1

clcollie at mindspring dot com ¶

24 years ago


Actually sscanf()_always_ returns an array if you specify less return variables than format specifiers. i may change this to return a scalar if only a single format specifier exists.

  Note that sscanf() is (almost) the complete functional equivalent of its "C" counterpart, so you can do the following to get the expected effect :



   sscanf("SN/2350001","SN/%d",&$serial)



The array return was a nicety for PHP.

down

-3

marcus at synchromedia dot co dot uk ¶

21 years ago


In PHP >= 4.3.0, if you use additional reference parameters, you will get this warning:

PHP Warning:  Call-time pass-by-reference has been deprecated - argument passed by value

This clearly has the potential to cause unexpected consequences (vars left empty), and will break existing code. So don't do it! These docs need updating to say this too.

The syntax:

    list($a, $b) = sscanf("hello world", "%s %s");

will work as expected, and doesn't seem to cause any problems with Apache that I've noticed.

down

-4

sbarnum.pointsystems@com ¶

21 years ago


More fun with phones!  This assumes that the phone number is 10 digits, with only numeric data, but it would be easy to check the length of the string first.

function formatPhone($phone) {
        if (empty($phone)) return "";
        sscanf($phone, "%3d%3d%4d", $area, $prefix, $exchange);
        $out = @$area ? "($area) " : "";
        $out .= $prefix . '-' . $exchange;
        return $out;
}

down

-9

nmmm at nmmm dot nu ¶

12 years ago


This is more like C/C++ example, but works on PHP too.



<?php

$qs = "index.php?id=34&name=john";



print_r(   sscanf($qs, "%[^?]?%[^?]")   );



$qs = "id=34&name=john";



print_r(   sscanf($qs, "id=%[^&]&name=%[^&]")   );

?>

down

-10

Igor Feghali ¶

16 years ago


parses an input string with fixed field sizes that contains data with spaces:

<?php
$result = sscanf("  Vendor: My Vendo Model: Super Model Foo  Rev: 1234",  
                 '  Vendor: %8[ -~] Model: %16[ -~] Rev: %4c',
                 $vendor, $model, $rev);
?>

$vendor => My Vendo
$model => Super Model Foo 
$rev => 1234

add a note