I'm converting 30 year old code and needed a string TAB function:
//tab function similar to TAB used in old BASIC languages
//though some of them did not truncate if the string were
//longer than the requested position
function tab($instring="",$topos=0){
if(strlen($instring)<$topos){
$result=str_pad($instring,$topos-1," ",STR_PAD_RIGHT);
}else{
$result=substr($instring,0,$topos-1);
}
return $result;
}
$pline="String with this tab to 50 and";
$tline=tab($pline,50)."finish it.";
echo $tline.PHP_EOL;
$pline="101010101020202020203030303030404040404050505050506060606060";
$tline=tab($pline,50)."finish it.";
echo $tline.PHP_EOL;
//Results in this output:
//String with this tab to 50 and finish it.
//1010101010202020202030303030304040404040505050505finish it.
String Funzioni
Vedere anche:
For even more powerful string handling and manipulating functions take a look at the Perl compatible regular expression functions. For working with multibyte character encodings, take a look at the Multibyte String functions.
Indice dei contenuti
- addcslashes — Esegue il quoting di una stringa con gli slash nello stile del C
- addslashes — Esegue il quoting di una stringa con gli slash
- bin2hex — Converte i dati binari nella rappresentazione esadecimale
- chop — Alias di di rtrim
- chr — Restituisce un carattere specifico
- chunk_split — Divide una stringa in segmento più piccoli
- convert_cyr_string — Converte da un set di caratteri Cirillico ad un'altro
- convert_uudecode — Decodifica una stringa codificata con uuencode
- convert_uuencode — Codifica uuencode di una stringa
- count_chars — Restituisce informazioni sui caratteri usati in una stringa
- crc32 — Calcola il crc32 polinomiale di una stringa
- crypt — Criptazione di una stringa a senso unico (hashing)
- echo — Visualizza una o più stringhe
- explode — Suddivide una stringa
- fprintf — Scrive una stringa formattata in uno stream
- get_html_translation_table — Restituisce la tabella di decodifica utilizzata da htmlspecialchars e htmlentities
- hebrev — Converte il testo logico Ebraico in testo visuale
- hebrevc — Converte il testo logico Ebraico in testo visuale con conversione del carattere di 'a capo'
- hex2bin — Decodes a hexadecimally encoded binary string
- html_entity_decode — Converte le entità HTML nei corrispondenti caratteri
- htmlentities — Converte tutti i possibili caratteri in entità HTML
- htmlspecialchars_decode — Convert special HTML entities back to characters
- htmlspecialchars — Converte i caratteri speciali in entità HTML
- implode — Unisce gli elementi di una matrice in una stringa
- join — Alias di di implode
- lcfirst — Make a string's first character lowercase
- levenshtein — Calcola la distanza Levenshtein tra due stringhe
- localeconv — Ottiene informazioni sul formato numerico
- ltrim — Rimuove gli spazi (o altri caratteri) dall'inizio di una stringa
- md5_file — Calcola l'hash md5 del file dato
- md5 — Calcola il valore md5 di una stringa
- metaphone — Calcola la chiave metaphone di una stringa
- money_format — Formattazione di un numero come stringa monetaria
- nl_langinfo — Ricava informazioni sulla lingua e le impostazioni locali
- nl2br — Inserisce il tag HTML di 'a capo' prima di tutti i caratteri di 'a capo' della stringa
- number_format — Formatta un numero con i gruppi delle migliaia
- ord — Restituisce il valore ASCII di un carattere
- parse_str — Suddivide una stringa in variabili
- print — Visualizza una stringa
- printf — Visualizza una stringa formattata
- quoted_printable_decode — Converte una stringa 'quoted-printable' in una stringa a 8 bit
- quoted_printable_encode — Convert a 8 bit string to a quoted-printable string
- quotemeta — Quota i meta caratteri
- rtrim — Rimuove gli spazi (ed altri caratteri) dalla fine della stringa
- setlocale — Imposta i parametri di localizzazione
- sha1_file — Calcola l'hash sha1 di un file
- sha1 — Calcola l'hash sha1 di una stringa
- similar_text — Calcola la similitudine tra due stringhe
- soundex — Calcola la chiave soundex di una data stringa
- sprintf — Restituisce una stringa formattata
- sscanf — Analizza l'input da una string in base al formato
- str_contains — Determine if a string contains a given substring
- str_decrement — Decrement an alphanumeric string
- str_ends_with — Checks if a string ends with a given substring
- str_getcsv — Parse a CSV string into an array
- str_increment — Increment an alphanumeric string
- str_ireplace — Versione insensibile alle miuscole/minuscole di str_replace
- str_pad — Riempie una stringa con un'altra stringa portando la prima ad una lunghezza pre-determinata
- str_repeat — Ripete una stringa
- str_replace — Sostituisce tutte le occorrenze della stringa cercata con la stringa di sostituzione
- str_rot13 — Esegue la trasformazione rot13 di una stringa
- str_shuffle — Mischia una stringa in modo casuale
- str_split — Converte una stringa in una matrice
- str_starts_with — Checks if a string starts with a given substring
- str_word_count — Restituisce informazioni sulle parole utilizzate in una stringa
- strcasecmp — Confronto non sensibile alle maiuscole e sicuro con i dati binari
- strchr — Alias di strstr
- strcmp — Confronto tra stringhe affidabile con dati binari
- strcoll — Confronto tra stringhe basato sulle impostazioni locali
- strcspn — Trova la lunghezza del segmento iniziale che non soddisfa una maschera
- strip_tags — Rimuove i tag HTML e PHP da una stringa
- stripcslashes — Rimuove gli slash aggiunti con addcslashes
- stripos — Trova la prima occorrenza in una stringa senza distinzione tra maiuscole e minuscole
- stripslashes — Rimuove gli slash aggiunti con addslashes
- stristr — Versione insensibile alle maiuscole/minuscole di strstr
- strlen — Restituisce la lunghezza di una stringa
- strnatcasecmp — Versione insensibile alle maiuscole/minuscole di confronto tra stringhe tramite l'algoritmo dell"ordine naturale"
- strnatcmp — Confronto tra stringhe con l'algoritmo dell' "ordine naturale"
- strncasecmp — Confronto sicuro con i testi binari, insensibile alle lettere maiuscole/minuscole sui primi n caratteri
- strncmp — Confronto tra stringhe sui primi n caratteri, sicuro con i dati binari
- strpbrk — Ricerca in una stringa uno qualsiasi dei caratteri di un dato set
- strpos — Trova la posizione della prima occorrenza di una stringa
- strrchr — Trova l'ultima occorrenza di un carattere in una stringa
- strrev — Inverte una stringa
- strripos — Trova la posizione dell'ultima occorrenza di una stringa in un'altra indipendentemente dalle lettere minuscole/maiusole
- strrpos — Trova la posizione dell'ultima occorrenza di un carattere in una stringa
- strspn — Trova la lunghezza di un testo che corrisponde alla maschera data
- strstr — Trova la prima occorrenza di una stringa
- strtok — Suddivide una stringa in token
- strtolower — Converte in minuscolo una stringa
- strtoupper — Converte in maiuscolo una stringa
- strtr — Traduce certi caratteri
- substr_compare — Confronto tra due stringhe a partire da una data posizione per n caratteri, sicuro con i dati binari e, opzionalmente, senza distinguere tra lettere maiuscole e minuscole
- substr_count — Conta il numero di occorrenze di un segmento di stringa
- substr_replace — Sostuisce una porzione di testo
- substr — Restituisce parte di una stringa
- trim — Rimuove gli spazi (ed altri caratteri) all'inizio e alla fine di un testo
- ucfirst — Converte in maiuscolo il primo carattere del testo
- ucwords — Converte in maiuscolo il primo carattere di ogni parola di una stringa
- utf8_decode — Converts a string from UTF-8 to ISO-8859-1, replacing invalid or unrepresentable characters
- utf8_encode — Converts a string from ISO-8859-1 to UTF-8
- vfprintf — Scrive una stringa formatta in un flusso
- vprintf — Visualizza una stringa formattata
- vsprintf — Restituisce una stringa formattata
- wordwrap — Divide una stringa ad un certo numero di caratteri utilizzando il carattere di divisione
add a note
User Contributed Notes 24 notes
lrirwin at alum dot wustl dot edu ¶
3 years ago
t0russ at gmail dot com ¶
19 years ago
to kristin at greenaple dot on dot ca:
thanx for sharing.
your function in recursive form proved to be slightly faster and it returns false (as it should) when the character is not found instead of number 0:
<?php
function strnposr($haystack, $needle, $occurance, $pos = 0) {
return ($occurance<2)?strpos($haystack, $needle, $pos):strnposr($haystack,$needle,$occurance-1,strpos($haystack, $needle, $pos) + 1);
}
?>
kristin at greenapple dot on dot ca ¶
19 years ago
I really searched for a function that would do this as I've seen it in other languages but I couldn't find it here. This is particularily useful when combined with substr() to take the first part of a string up to a certain point.
strnpos() - Find the nth position of needle in haystack.
<?php
function strnpos($haystack, $needle, $occurance, $pos = 0) {
for ($i = 1; $i <= $occurance; $i++) {
$pos = strpos($haystack, $needle, $pos) + 1;
}
return $pos - 1;
}
?>
Example: Give me everything up to the fourth occurance of '/'.
<?php
$haystack = "/home/username/www/index.php";
$needle = "/";
$root_dir = substr($haystack, 0, strnpos($haystack, $needle, 4));
echo $root_dir;
?>
Returns: /home/username/www
Use this example with the server variable $_SERVER['SCRIPT_NAME'] as the haystack and you can self-discover a document's root directory for the purposes of locating global files automatically!
admin at fivestarbuy dot com ¶
19 years ago
This example lets you parse an unparsed strings variables. Warning: This could cause security leaks if you allow users to pass $variables through this engine. I recommend only using this for your Content Management System.
<?
$mytime=time();
$mydog="My Dog Ate My PHP!";
# Your Parsing String:
$s1 = 'Hyphen Variable Preserving: $mytime, and $mydog';
echo "Before: <br><br>$s1<br><br>";
# Remember, wherever you define this, it will not be defined GLOBAL into the function
# which is why we define it here. Defining it global could lead to security issues.
$vardata=get_defined_vars();
# Parse the string
$s1 = StrParse($s1,$vardata);
echo "After: <br><br>$s1";
function StrParse($str,$vardata) {
# Takes a string, or piece of data, that contains PHP Variables
# For example, unparsed variables like: Test using time: $mytime
# This example shows $mytime, and not the actual variable value.
# The end result shows the actual variable value of $mytime.
# This is useful for building a content management system,
# and directing your variables into your content data,
# where content is stored in a file or database, unparsed.
# Of course this could slow down page loads, but it's a good way
# to parse data from current variables into your loaded new data
# making it compatible.
# Then the variables are replaced with the actual variable..
$getvarkeys=array_keys($vardata);
$ret=$str;
for ($x=0; $x < count($getvarkeys); $x++) {
$myvar=$getvarkeys[$x];
#echo "Variable: " . $myvar . " [" . $vardata[$myvar] . "]<br>";
$ret=str_replace('$' . $myvar, $vardata[$myvar], $ret);
}
return $ret;
}
?>
[tab!] ¶
20 years ago
//
// string strtrmvistl( string str, [int maxlen = 64],
// [bool right_justify = false],
// [string delimter = "<br>\n"])
//
// splits a long string into two chunks (a start and an end chunk)
// of a given maximum length and seperates them by a given delimeter.
// a second chunk can be right-justified within maxlen.
// may be used to 'spread' a string over two lines.
//
function strtrmvistl($str, $maxlen = 64, $right_justify = false, $delimter = "<br>\n") {
if(($len = strlen($str = chop($str))) > ($maxlen = max($maxlen, 12))) {
$newstr = substr($str, 0, $maxlen - 3);
if($len > ($maxlen - 3)) {
$endlen = min(($len - strlen($newstr)), $maxlen - 3);
$newstr .= "..." . $delimter;
if($right_justify)
$newstr .= str_pad('', $maxlen - $endlen - 3, ' ');
$newstr .= "..." . substr($str, $len - $endlen);
}
return($newstr);
}
return($str);
}
webmaster at cafe-clope dot net ¶
19 years ago
A comprehensive concatenation function, that works with array and strings
<?php
function str_cat() {
$args = func_get_args() ;
// Asserts that every array given as argument is $dim-size.
// Keys in arrays are stripped off.
// If no array is found, $dim stays unset.
foreach($args as $key => $arg) {
if(is_array($arg)) {
if(!isset($dim))
$dim = count($arg) ;
elseif($dim != count($arg))
return FALSE ;
$args[$key] = array_values($arg) ;
}
}
// Concatenation
if(isset($dim)) {
$result = array() ;
for($i=0;$i<$dim;$i++) {
$result[$i] = '' ;
foreach($args as $arg)
$result[$i] .= ( is_array($arg) ? $arg[$i] : $arg ) ;
}
return $result ;
} else {
return implode($args) ;
}
}
?>
A simple example :
<?php
str_cat(array(1,2,3), '-', array('foo' => 'foo', 'bar' => 'bar', 'noop' => 'noop')) ;
?>
will return :
Array (
[0] => 1-foo
[1] => 2-bar
[2] => 3-noop
)
More usefull :
<?php
$myget = $_GET ; // retrieving previous $_GET values
$myget['foo'] = 'b a r' ; // changing one value
$myget = str_cat(array_keys($myget), '=', array_map('rawurlencode', array_values($myget))) ;
$querystring = implode(ini_get('arg_separator.output'), $myget)) ;
?>
will return a valid querystring with some values changed.
Note that <?php str_cat('foo', '&', 'bar') ; ?> will return 'foo&bar', while <?php str_cat(array('foo'), '&', 'bar') ; ?> will return array(0 => foo&bar)
terry dot greenlaw at logicalshift dot com ¶
20 years ago
Here's a simpler "simplest" way to toggle through a set of 1..n colors for web backgrounds:
<?php
$colours = array('#000000', '#808080', '#A0A0A0', '#FFFFFF');
// Get a colour
$color = next($colors) or $color = reset($colors);
?>
The code doesn't need to know anything about the number of elements being cycled through. That way you won't have to tracking down all the code when changing the number of colors or the color values.
Anonymous ¶
20 years ago
In response to hackajar <matt> yahoo <trot> com,
No string-to-array function exists because it is not needed. If you reference a string with an offset like you do with an array, the character at that offset will be return. This is documented in section III.11's "Strings" article under the "String access and modification by character" heading.
str at maphpia dot com ¶
11 years ago
I was looking for a function to find the common substring in 2 different strings. I tried both the mb_string_intersect and string_intersect functions listed here but didn't work for me. I found the algorithm at http://en.wikibooks.org/wiki/Algorithm_implementation/Strings/Longest_common_substring#PHP so here I post you the function
<?php
/**
* Finds the matching string between 2 strings
*
* @param string $string1
* @param string $string2
* @param number $minChars
*
* @return NULL|string
*
* @link http://en.wikibooks.org/wiki/Algorithm_implementation/Strings/Longest_common_substring#PHP
*/
function string_intersect($string_1, $string_2)
{
$string_1_length = strlen($string_1);
$string_2_length = strlen($string_2);
$return = "";
if ($string_1_length === 0 || $string_2_length === 0) {
// No similarities
return $return;
}
$longest_common_subsequence = array();
// Initialize the CSL array to assume there are no similarities
for ($i = 0; $i < $string_1_length; $i++) {
$longest_common_subsequence[$i] = array();
for ($j = 0; $j < $string_2_length; $j++) {
$longest_common_subsequence[$i][$j] = 0;
}
}
$largest_size = 0;
for ($i = 0; $i < $string_1_length; $i++) {
for ($j = 0; $j < $string_2_length; $j++) {
// Check every combination of characters
if ($string_1[$i] === $string_2[$j]) {
// These are the same in both strings
if ($i === 0 || $j === 0) {
// It's the first character, so it's clearly only 1 character long
$longest_common_subsequence[$i][$j] = 1;
} else {
// It's one character longer than the string from the previous character
$longest_common_subsequence[$i][$j] = $longest_common_subsequence[$i - 1][$j - 1] + 1;
}
if ($longest_common_subsequence[$i][$j] > $largest_size) {
// Remember this as the largest
$largest_size = $longest_common_subsequence[$i][$j];
// Wipe any previous results
$return = "";
// And then fall through to remember this new value
}
if ($longest_common_subsequence[$i][$j] === $largest_size) {
// Remember the largest string(s)
$return = substr($string_1, $i - $largest_size + 1, $largest_size);
}
}
// Else, $CSL should be set to 0, which it was already initialized to
}
}
// Return the list of matches
return $return;
}
admin at rotarymulundeast dot org ¶
18 years ago
Here's an easier way to find nth...
function nth($numbex){
if ($numbex%10 == 1 && $numbex%100 != 11) $sth='st';
elseif ($numbex%10 == 2 && $numbex%100 != 12) $sth='nd';
elseif ($numbex%10 == 3 && $numbex%100 != 13) $sth='rd';
else $sth = 'th';
return $sth;
}
there is is no need to check if the user has entered a non-integer as we may be using this function for expressing variables as well eg. ith value of x , nth root of z ,etc...
james dot d dot baker at gmail dot com ¶
19 years ago
<?php
/*
Written By James Baker, May 27th 2005
sentenceCase($string);
$string: The string to convert to sentence case.
Converts a string into proper sentence case (First letter of each sentance capital, all the others smaller)
Example Usage:
echo sentenceCase("HELLO WORLD!!! THIS IS A CAPITALISED SENTENCE. this isn't.");
Returns:
Hello world!!! This is a capitalised sentence. This isn't.
*/
function sentenceCase($s){
$str = strtolower($s);
$cap = true;
for($x = 0; $x < strlen($str); $x++){
$letter = substr($str, $x, 1);
if($letter == "." || $letter == "!" || $letter == "?"){
$cap = true;
}elseif($letter != " " && $cap == true){
$letter = strtoupper($letter);
$cap = false;
}
$ret .= $letter;
}
return $ret;
}
?>
navarr at gmail dot com ¶
19 years ago
stripos for PHP4.x
<?php
function stripos($haystack,$needle) {
return strpos(strtoupper($haystack),strtoupper($needle));
}
?>
SteveRusin ¶
18 years ago
The functions below:
function beginsWith( $str, $sub )
function endsWith( $str, $sub )
Are correct, but flawed. You'd need to use the === operator instead:
function beginsWith( $str, $sub ) {
return ( substr( $str, 0, strlen( $sub ) ) === $sub );
}
function endsWith( $str, $sub ) {
return ( substr( $str, strlen( $str ) - strlen( $sub ) ) === $sub );
}
Otherwise, endsWith would return "foobar.0" ends with ".0" as well as "0" or "00" or any amount of zeros because numerically .0 does equal 0.
Anonymous ¶
19 years ago
to: james dot d dot baker at gmail dot com
PHP has a builtin function for doing what your function does,
http://php.net/ucfirst
http://php.net/ucwords
Verdauga ¶
16 years ago
Just a note in regards to bloopletech a few posts down:
The word "and" should not be used when converting numbers to text. "And" (at least in US English) should only be used to indicate the decimal place.
Example:
1,796,706 => one million, seven hundred ninety-six thousand, seven hundred six.
594,359.34 => five hundred ninety four thousand, three hundred fifty nine and thirty four hundredths
andy a t onesandzeros d o t biz ¶
20 years ago
I use these little doo-dads quite a bit. I just thought I'd share them and maybe save someone a little time. No biggy. :)
// returns true if $str begins with $sub
function beginsWith( $str, $sub ) {
return ( substr( $str, 0, strlen( $sub ) ) == $sub );
}
// return tru if $str ends with $sub
function endsWith( $str, $sub ) {
return ( substr( $str, strlen( $str ) - strlen( $sub ) ) == $sub );
}
// trims off x chars from the front of a string
// or the matching string in $off is trimmed off
function trimOffFront( $off, $str ) {
if( is_numeric( $off ) )
return substr( $str, $off );
else
return substr( $str, strlen( $off ) );
}
// trims off x chars from the end of a string
// or the matching string in $off is trimmed off
function trimOffEnd( $off, $str ) {
if( is_numeric( $off ) )
return substr( $str, 0, strlen( $str ) - $off );
else
return substr( $str, 0, strlen( $str ) - strlen( $off ) );
}
mike "eyes" moe ¶
17 years ago
Here is a truly random string generator it uses the most common string functions it will work on anywhere.
<?php
function random_string($max = 20){
$chars = explode(" ", "a b c d e f g h i j k l m n o p q r s t u v w x y z 0 1 2 3 4 5 6 7 8 9");
for($i = 0; $i < $max; $i++){
$rnd = array_rand($chars);
$rtn .= base64_encode(md5($chars[$rnd]));
}
return substr(str_shuffle(strtolower($rtn)), 0, $max);
}
?>
m ¶
17 years ago
Regarding the code for the function beginsWith($str, $sub), I found that it has problems when only one character is present after the string searched for. I found that this works better instead:
<?php
function beginsWith($str, $sub) {
return (strncmp($str, $sub, strlen($sub)) == 0);
}
?>
Stephen Dewey ¶
16 years ago
If you want a function to return all text in a string up to the Nth occurrence of a substring, try the below function.
Works in PHP >= 5.
(Pommef provided another sample function for this purpose below, but I believe it is incorrect.)
<?php
// Returns all of $haystack up to (but excluding) the $n_occurrence occurrence of $needle. Therefore:
// If there are < $n_occurrence occurrences of $needle in $haystack, the entire string will be returned.
// If there are >= $n_occurrence occurrences of $needle in $haystack, the returned string will end before the $n_occurrence'th needle.
// This function only makes sense for $n_occurrence >= 1
function nsubstr($needle, $haystack, $n_occurrence)
{
// After exploding by $needle, every entry in $arr except (possibly) part of the last entry should have its content returned.
$arr = explode($needle,$haystack,$n_occurrence);
// Examine last entry in $arr. If it contains $needle, cut out all text except for the text before $needle.
$last = count($arr) - 1;
$pos_in_last = strpos($arr[$last],$needle);
if ($pos_in_last !== false)
$arr[$last] = substr($arr[$last],0,$pos_in_last);
return implode($needle,$arr);
}
$string = 'd24jkdslgjldk2424jgklsjg24jskgldjk24';
print 'S: ' . $string . '<br>';
print '1: ' . nsubstr('24',$string,1) . '<br>';
print '2: ' . nsubstr('24',$string,2) . '<br>';
print '3: ' . nsubstr('24',$string,3) . '<br>';
print '4: ' . nsubstr('24',$string,4) . '<br>';
print '5: ' . nsubstr('24',$string,5) . '<br>';
print '6: ' . nsubstr('24',$string,6) . '<br>';
print '7: ' . nsubstr('24',$string,7) . '<br>';
/*
// prints:
S: d24jkdslgjldk2424jgklsjg24jskgldjk24
1: d
2: d24jkdslgjldk
3: d24jkdslgjldk24
4: d24jkdslgjldk2424jgklsjg
5: d24jkdslgjldk2424jgklsjg24jskgldjk
6: d24jkdslgjldk2424jgklsjg24jskgldjk24
7: d24jkdslgjldk2424jgklsjg24jskgldjk24
*/
?>
Note that this function can be combined with wordwrap() to accomplish a routine but fairly difficult web design goal, namely, limiting inline HTML text to a certain number of lines. wordwrap() can break your string using <br>, and then you can use this function to only return text up to the N'th <br>.
You will still have to make a conservative guess of the max number of characters per line with wordwrap(), but you can be more precise than if you were simply truncating a multiple-line string with substr().
See example:
<?php
$text = 'Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Pellentesque id massa. Duis sollicitudin ipsum vel diam. Aliquam pulvinar sagittis felis. Nullam hendrerit semper elit. Donec convallis mollis risus. Cras blandit mollis turpis. Vivamus facilisis, sapien at tincidunt accumsan, arcu dolor suscipit sem, tristique convallis ante ante id diam. Curabitur mollis, lacus vel gravida accumsan, enim quam condimentum est, vitae rutrum neque magna ac enim.';
$wrapped_text = wordwrap($text,100,'<br>',true);
$three_lines = nsubstr('<br>',$wrapped_text,3);
print '<br><br>' . $three_lines;
$four_lines = nsubstr('<br>',$wrapped_text,4);
print '<br><br>' . $four_lines;
/*
prints:
Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Pellentesque id massa. Duis sollicitudin
ipsum vel diam. Aliquam pulvinar sagittis felis. Nullam hendrerit semper elit. Donec convallis
mollis risus. Cras blandit mollis turpis. Vivamus facilisis, sapien at tincidunt accumsan, arcu
Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Pellentesque id massa. Duis sollicitudin
ipsum vel diam. Aliquam pulvinar sagittis felis. Nullam hendrerit semper elit. Donec convallis
mollis risus. Cras blandit mollis turpis. Vivamus facilisis, sapien at tincidunt accumsan, arcu
dolor suscipit sem, tristique convallis ante ante id diam. Curabitur mollis, lacus vel gravida
*/
?>
administrador(ensaimada)sphoera(punt)com ¶
18 years ago
I've prepared this simple function to obtain a string delimited between tags (not only XML tags!). Anybody needs something like this?.
<?php
function get_string_between($string, $start, $end){
$string = " ".$string;
$ini = strpos($string,$start);
if ($ini == 0) return "";
$ini += strlen($start);
$len = strpos($string,$end,$ini) - $ini;
return substr($string,$ini,$len);
}
$string = "this [custom] function is useless!!";
echo get_string_between($string,"[","]");
// must return "custom";
?>
more functions at http://www.sphoera.com
rh at richardhoward dot net ¶
19 years ago
<?php
/**
Utility class: static methods for cleaning & escaping untrusted (i.e.
user-supplied) strings.
Any string can (usually) be thought of as being in one of these 'modes':
pure = what the user actually typed / what you want to see on the page /
what is actually stored in the DB
gpc = incoming GET, POST or COOKIE data
sql = escaped for passing safely to RDBMS via SQL (also, data from DB
queries and file reads if you have magic_quotes_runtime on--which
is rare)
html = safe for html display (htmlentities applied)
Always knowing what mode your string is in--using these methods to
convert between modes--will prevent SQL injection and cross-site scripting.
This class refers to its own namespace (so it can work in PHP 4--there is no
self keyword until PHP 5). Do not change the name of the class w/o changing
all the internal references.
Example usage: a POST value that you want to query with:
$username = Str::gpc2sql($_POST['username']);
*/
//This sets SQL escaping to use slashes; for Sybase(/MSSQL)-style escaping
// ( ' --> '' ), set to true.
define('STR_SYBASE', false);
class Str {
function gpc2sql($gpc, $maxLength = false)
{
return Str::pure2sql(Str::gpc2pure($gpc), $maxLength);
}
function gpc2html($gpc, $maxLength = false)
{
return Str::pure2html(Str::gpc2pure($gpc), $maxLength);
}
function gpc2pure($gpc)
{
if (ini_get('magic_quotes_sybase'))
$pure = str_replace("''", "'", $gpc);
else $pure = get_magic_quotes_gpc() ? stripslashes($gpc) : $gpc;
return $pure;
}
function html2pure($html)
{
return html_entity_decode($html);
}
function html2sql($html, $maxLength = false)
{
return Str::pure2sql(Str::html2pure($html), $maxLength);
}
function pure2html($pure, $maxLength = false)
{
return $maxLength ? htmlentities(substr($pure, 0, $maxLength))
: htmlentities($pure);
}
function pure2sql($pure, $maxLength = false)
{
if ($maxLength) $pure = substr($pure, 0, $maxLength);
return (STR_SYBASE)
? str_replace("'", "''", $pure)
: addslashes($pure);
}
function sql2html($sql, $maxLength = false)
{
$pure = Str::sql2pure($sql);
if ($maxLength) $pure = substr($pure, 0, $maxLength);
return Str::pure2html($pure);
}
function sql2pure($sql)
{
return (STR_SYBASE)
? str_replace("''", "'", $sql)
: stripslashes($sql);
}
}
?>
php at moechofe dot com ¶
19 years ago
<?php
/*
* str_match
*
* return a string with only cacacteres defined in a expression return false if the expression is not valid
*
* @param $str string the string
* @param $match the expression based on the class definition off a PCRE regular expression.
* the '[', ']', '\' and '^' at class start need to be escaped.
* like : -a-z0-9_@.
*/
function str_match( $str, $match )
{
$return = '';
if( eregi( '(.*)', $match, $class ) )
{
$match = '['.$regs[1].']';
for( $i=0; $i<strlen($str); $i++ )
if( ereg( '['.$class[1].']', $str[$i] ) )
$return .= $str{$i};
return $return;
}
else return false;
}
/*
* example
* accept only alphanum caracteres from the GET/POST parameters 'a'
*/
if( ! empty($_REQUEST['a']) )
$_REQUEST['a'] = str_match( $_REQUEST['a'], 'a-zA-Z0-9' );
else
$_REQUEST['a'] = 'default';
?>
Pommef ¶
19 years ago
Example: Give me everything up to the fourth occurance of '/'.
<?php
$haystack = "/home/username/www/index.php";
$needle = "/";
function strnpos($haystack, $needle, $occurance, $pos = 0) {
$res = implode($needle,$haystack);
$res = array_slice($res, $pos, $occurance);
return explode ($needle,$res);
}
?>
Tomek Rychtyk ¶
12 years ago
Get the intersection of two strings using array_intersect
<?php
function string_intersect($string1, $string2)
{
$array1 = $array2 = array();
for($i = 0, $j = 0, $s1_len = strlen($string1), $s2_len = strlen($string2);($i < $s1_len) || ($j < $s2_len); $i++, $j++) {
if($i < $s1_len) {
$array1[] = $string1[$i];
}
if($j < $s2_len) {
$array2[] = $string2[$j];
}
}
return implode('', array_intersect($array1, $array2));
}
?>
For more advanced comparison you can use array_uintersect as well.
