An easier way to unpack nested array elements
$array = [
[1, 2],
[3, 4],
];
foreach ($array as [$a, $b]) {
echo "A: $a; B: $b\n";
}
foreach
(PHP 4, PHP 5, PHP 7)
The foreach construct provides an easy way to iterate over arrays. foreach works only on arrays and objects, and will issue an error when you try to use it on a variable with a different data type or an uninitialized variable. There are two syntaxes:
foreach (array_expression as $value)
statement
foreach (array_expression as $key => $value)
statement
The first form loops over the array given by array_expression. On each iteration, the value of the current element is assigned to $value and the internal array pointer is advanced by one (so on the next iteration, you'll be looking at the next element).
The second form will additionally assign the current element's key to the $key variable on each iteration.
It is possible to customize object iteration.
Note:
In PHP 5, when foreach first starts executing, the internal array pointer is automatically reset to the first element of the array. This means that you do not need to call reset() before a foreach loop.
As foreach relies on the internal array pointer in PHP 5, changing it within the loop may lead to unexpected behavior.
In PHP 7, foreach does not use the internal array pointer.
In order to be able to directly modify array elements within the loop precede $value with &. In that case the value will be assigned by reference.
<?php
$arr = array(1, 2, 3, 4);
foreach ($arr as &$value) {
$value = $value * 2;
}
// $arr is now array(2, 4, 6, 8)
unset($value); // break the reference with the last element
?>
Warning
Reference of a $value and the last array element remain even after the foreach loop. It is recommended to destroy it by unset(). Otherwise you will experience the following behavior:
<?php
$arr = array(1, 2, 3, 4);
foreach ($arr as &$value) {
$value = $value * 2;
}
// $arr is now array(2, 4, 6, 8)
// without an unset($value), $value is still a reference to the last item: $arr[3]
foreach ($arr as $key => $value) {
// $arr[3] will be updated with each value from $arr...
echo "{$key} => {$value} ";
print_r($arr);
}
// ...until ultimately the second-to-last value is copied onto the last value
// output:
// 0 => 2 Array ( [0] => 2, [1] => 4, [2] => 6, [3] => 2 )
// 1 => 4 Array ( [0] => 2, [1] => 4, [2] => 6, [3] => 4 )
// 2 => 6 Array ( [0] => 2, [1] => 4, [2] => 6, [3] => 6 )
// 3 => 6 Array ( [0] => 2, [1] => 4, [2] => 6, [3] => 6 )
?>
Before PHP 5.5.0, referencing $value is only possible if the iterated array can be referenced (i.e. if it is a variable). The following code works only as of PHP 5.5.0:
<?php
foreach (array(1, 2, 3, 4) as &$value) {
$value = $value * 2;
}
?>
Note:
foreach does not support the ability to suppress error messages using '@'.
You may have noticed that the following are functionally identical:
<?php
$arr = array("one", "two", "three");
reset($arr);
while (list(, $value) = each($arr)) {
echo "Value: $value<br />\n";
}
foreach ($arr as $value) {
echo "Value: $value<br />\n";
}
?>
The following are also functionally identical:
<?php
$arr = array("one", "two", "three");
reset($arr);
while (list($key, $value) = each($arr)) {
echo "Key: $key; Value: $value<br />\n";
}
foreach ($arr as $key => $value) {
echo "Key: $key; Value: $value<br />\n";
}
?>
Some more examples to demonstrate usage:
<?php
/* foreach example 1: value only */
$a = array(1, 2, 3, 17);
foreach ($a as $v) {
echo "Current value of \$a: $v.\n";
}
/* foreach example 2: value (with its manual access notation printed for illustration) */
$a = array(1, 2, 3, 17);
$i = 0; /* for illustrative purposes only */
foreach ($a as $v) {
echo "\$a[$i] => $v.\n";
$i++;
}
/* foreach example 3: key and value */
$a = array(
"one" => 1,
"two" => 2,
"three" => 3,
"seventeen" => 17
);
foreach ($a as $k => $v) {
echo "\$a[$k] => $v.\n";
}
/* foreach example 4: multi-dimensional arrays */
$a = array();
$a[0][0] = "a";
$a[0][1] = "b";
$a[1][0] = "y";
$a[1][1] = "z";
foreach ($a as $v1) {
foreach ($v1 as $v2) {
echo "$v2\n";
}
}
/* foreach example 5: dynamic arrays */
foreach (array(1, 2, 3, 4, 5) as $v) {
echo "$v\n";
}
?>
Unpacking nested arrays with list()
(PHP 5 >= 5.5.0, PHP 7)
PHP 5.5 added the ability to iterate over an array of arrays and unpack the nested array into loop variables by providing a list() as the value.
For example:
<?php
$array = [
[1, 2],
[3, 4],
];
foreach ($array as list($a, $b)) {
// $a contains the first element of the nested array,
// and $b contains the second element.
echo "A: $a; B: $b\n";
}
?>
위 예제의 출력:
A: 1; B: 2 A: 3; B: 4
You can provide fewer elements in the list() than there are in the nested array, in which case the leftover array values will be ignored:
<?php
$array = [
[1, 2],
[3, 4],
];
foreach ($array as list($a)) {
// Note that there is no $b here.
echo "$a\n";
}
?>
위 예제의 출력:
1 3
A notice will be generated if there aren't enough array elements to fill the list():
<?php
$array = [
[1, 2],
[3, 4],
];
foreach ($array as list($a, $b, $c)) {
echo "A: $a; B: $b; C: $c\n";
}
?>
위 예제의 출력:
Notice: Undefined offset: 2 in example.php on line 7 A: 1; B: 2; C: Notice: Undefined offset: 2 in example.php on line 7 A: 3; B: 4; C:
변경점
| 버전 | 설명 |
|---|---|
| 7.0.0 | foreach does not use the internal array pointer anymore. |
| 5.5.0 | Referencing of $value is supported for expressions. Formerly, only variables have been supported. |
| 5.5.0 | Unpacking nested arrays with list() is supported. |
add a note
User Contributed Notes 2 notes
Okafor Chiagozie ¶
2 years ago
Sanusi Hassan ¶
2 years ago
destructure array elements
you can unpac nested array elements using the following
<?php
$array = [
[1, 2],
[3, 4],
];
foreach ($array as $v) {
[$a, $b] = $v;
echo "A: $a; B: $b\n";
}
?>
