Since PHP 7.1, keys can be specified
exemple :
<?php
$array = ['locality' => 'Tunis', 'postal_code' => '1110'];
list('postal_code' => $zipCode, 'locality' => $locality) = $array;
print $zipCode; // will output 1110
print $locality; // will output Tunis
?>
list
(PHP 4, PHP 5, PHP 7)
list — 배열처럼 변수에 할당
설명
array()처럼, 이 함수는 실제 함수가 아니고 언어 구조이다. list()는 한번의 조작으로 배열 목록을 지정하기 위해 사용된다.
인수
-
varname -
변수.
반환값
값을 반환하지 않습니다.
예제
Example #1 list() 예제
<?php
$info = array('coffee', 'brown', 'caffeine');
// 모든 변수를 목록화한다
list($drink, $color, $power) = $info;
echo "$drink is $color and $power makes it special.\n";
// 그들중 일부를 목록화한다
list($drink, , $power) = $info;
echo "$drink has $power.\n";
// 또는 세번째 값으로만 건너띈다
list( , , $power) = $info;
echo "I need $power!\n";
// list()는 문자열에는 작동하지 않습니다
list($bar) = "abcde";
var_dump($bar); // NULL
?>
Example #2 list() 용례
<table>
<tr>
<th>Employee name</th>
<th>Salary</th>
</tr>
<?php
$result = mysql_query ("SELECT id, name, salary FROM employees", $conn);
while (list ($id, $name, $salary) = mysql_fetch_row ($result)) {
echo " <tr>\n" .
" <td><a href=\"info.php?id=$id\">$name</a></td>\n" .
" <td>$salary</td>\n" .
" </tr>\n";
}
?>
</table>
Example #3 중첩 list() 사용하기
<?php
list($a, list($b, $c)) = array(1, array(2, 3));
var_dump($a, $b, $c);
?>
int(1) int(2) int(3)
Example #4 배열 인덱스로 list() 사용하기
<?php
$info = array('coffee', 'brown', 'caffeine');
list($a[0], $a[1], $a[2]) = $info;
var_dump($a);
?>
다음과 같이 출력된다 (이 원소들의 순서는 list() 문법에서 쓰여진 순서와 반대라는 점에 주의):
array(3) {
[2]=>
string(8) "caffeine"
[1]=>
string(5) "brown"
[0]=>
string(6) "coffee"
}
주의
Warning
list()는 가장 우측 인수에서 시작하는 값들을 지정한다. 일반적인 변수들을 사용하면, 이 동작에 대해서 신경 쓸 필요가 없다. 그러나 인덱스를 갖는 배열에서 사용한다면 왼쪽에서 오른쪽으로 list()에서 쓰여진것과 같이 배열안의 인덱스 순서로 되는것이라고 보통 기대할수 있으나, 그렇지 않다. 역순으로 지정이 된다.
Note:
list()는 숫자 배열에서만 작동하고 0부터 시작하는 숫자 인덱스로 가정한다.
add a note
User Contributed Notes 25 notes
Rhamnia Mohamed ¶
7 years ago
carlosv775 at gmail dot com ¶
7 years ago
In PHP 7.1 we can do the following:
<?php
[$a, $b, $c] = ['a', 'b', 'c'];
?>
Before, we had to do:
<?php
list($a, $b, $c) = ['a', 'b', 'c'];
?>
grzeniufication ¶
10 years ago
The example showing that:
$info = array('kawa', 'brązowa', 'kofeina');
list($a[0], $a[1], $a[2]) = $info;
var_dump($a);
outputs:
array(3) {
[2]=>
string(8) "kofeina"
[1]=>
string(5) "brązowa"
[0]=>
string(6) "kawa"
}
One thing to note here is that if you define the array earlier, e.g.:
$a = [0, 0, 0];
the indexes will be kept in the correct order:
array(3) {
[0]=>
string(4) "kawa"
[1]=>
string(8) "brązowa"
[2]=>
string(7) "kofeina"
}
Thought that it was worth mentioning.
megan at voices dot com ¶
11 years ago
As noted, list() will give an error if the input array is too short. This can be avoided by array_merge()'ing in some default values. For example:
<?php
$parameter = 'name';
list( $a, $b ) = array_merge( explode( '=', $parameter ), array( true ) );
?>
However, you will have to array_merge with an array long enough to ensure there are enough elements (if $parameter is empty, the code above would still error).
An alternate approach would be to use array_pad on the array to ensure its length (if all the defaults you need to add are the same).
<?php
$parameter = 'bob-12345';
list( $name, $id, $fav_color, $age ) = array_pad( explode( '-', $parameter ), 4, '' );
var_dump($name, $id, $fav_color, $age);
/* outputs
string(3) "bob"
string(5) "12345"
string(0) ""
string(0) ""
*/
?>
chris at chlab dot ch ¶
12 years ago
The example states the following:
<?php
// list() doesn't work with strings
list($bar) = "abcde";
var_dump($bar);
// output: NULL
?>
If the string is in a variable however, it seems using list() will treat the string as an array:
<?php
$string = "abcde";
list($foo) = $string;
var_dump($foo);
// output: string(1) "a"
?>
grzeniufication ¶
7 years ago
<?php
/**
* It seems you can skip listed values.
* Here's an example to show what I mean.
*
* FYI works just as well with PHP 7.1 shorthand list syntax.
* Tested against PHP 5.6.30, 7.1.5
*/
$a = [ 1, 2, 3, 4 ];
// this is quite normal use case for list
echo "Unpack all values\n";
list($v1, $v2, $v3, $v4) = $a;
echo "$v1, $v2, $v3, $v4\n";
unset($v1, $v2, $v3, $v4);
// this is what I mean:
echo "Skip middle\n";
list($v1, , , $v4) = $a;
echo "$v1, $v2, $v3, $v4\n";
unset($v1, $v2, $v3, $v4);
echo "Skip beginning\n";
list( , , $v3, $v4) = $a;
echo "$v1, $v2, $v3, $v4\n";
unset($v1, $v2, $v3, $v4);
echo "Skip end\n";
list($v1, $v2, , ) = $a;
echo "$v1, $v2, $v3, $v4\n";
unset($v1, $v2, $v3, $v4);
echo "Leave middle\n";
list( , $v2, $v3, ) = $a;
echo "$v1, $v2, $v3, $v4\n";
unset($v1, $v2, $v3, $v4);
pemapmodder1970 at gmail dot com ¶
8 years ago
list() can be used with foreach
<?php
$array = [[1, 2], [3, 4], [5, 6]];
foreach($array as list($odd, $even)){
echo "$odd is odd; $even is even", PHP_EOL;
}
?>
The output:
===
1 is odd; 2 is even
3 is odd; 4 is even
5 is odd; 6 is even
john at jbwalker dot com ¶
10 years ago
The list construct seems to look for a sequential list of indexes rather taking elements in sequence. What that obscure statement means is that if you unset an element, list will not simply jump to the next element and assign that to the variable but will treat the missing element as a null or empty variable:
$test = array("a","b","c","d");
unset($test[1]);
list($a,$b,$c)=$test;
print "\$a='$a' \$b='$b' \$c='$c'<BR>";
results in:
$a='a' $b='' $c='c'
not:
$a='a' $b='c' $c='d'
svennd ¶
11 years ago
The list() definition won't throw an error if your array is longer then defined list.
<?php
list($a, $b, $c) = array("a", "b", "c", "d");
var_dump($a); // a
var_dump($b); // b
var_dump($c); // c
?>
diyor024 at gmail dot com ¶
3 years ago
Don't miss simple array pattern matching since php 7
<?php
[$a] = ['hello!'];
var_dump($a); // 'hello!'
$arr = [4 => 50];
[4 => $fifty] = $arr;
var_dump($fifty); // 50
$multidimensionalArray = [['id' => 15, 'email' => 'diyor024@gmail.com']];
[['id' => $id, 'email' => $email]] = $multidimensionalArray;
var_dump($id, $email); // 15 diyor024@gmail.com
?>
nek dot dev at gmail dot com ¶
1 year ago
It can be convenient to specify a default value in case an element is missing in the list. You can use operator + for this:
<?php
$someArray = ['color' => 'orange'];
['color' => $color, 'size' => $size] = $someArray + ['color' => null, 'size' => null];
?>
This will avoid the warning `Undefined array key "size"` you would encounter otherwise.
vike2000 at gmail dot com ¶
4 years ago
Setting it like <?php list($var1,$varN) = null ?> does _not_ raise an E_NOTICE (or other error) and afaics effectively equals an https://php.net/function.unset of $var1,$varN.
I note this as contrasting with the fact that PHP triggers an E_NOTICE about "Undefined offset" "if there aren't enough array elements to fill the list()", as attow documented for https://php.net/control-structures.foreach#control-structures.foreach.list and here only noted in https://php.net/function.list#122951 by Mardaneus.
For completeness, a bash(1) (v5.0 or 4.3 on macos10.13) cli test producing the same result for all my PHP-versions (installed via macports.org) follows. It's also tested with php7.3 using bash5.0 on Debian10:
bash --noprofile --norc -c 'for php in php{{53..56},{70..73}};do for literal in "array()" null;do echo -n $php …=$literal:&&$php -n -d error_reporting=E_ALL -r "var_dump(list(\$var)=$literal);";done;done'
# Above produces the same result pairs per version from:
php53 …=array():
Notice: Undefined offset: 0 in Command line code on line 1
array(0) {
}
# ... to:
php73 …=null:NULL
mark at manngo dot net ¶
3 years ago
For PHP 7.1 on, the documentation states that integer and string keys can be mixed, but that elements with and without keys cannot. Here is an example, using data from getimagesize() with mixed keys:
<?php
$data=[
0=> 160,
1 => 120,
2 => 2,
3 => 'width="160" height="120"',
'mime' => 'image/jpeg'
];
list(0=>$width,1=>$height,2=>$type,3=>$dimensions,'mime'=>$mime)=$data;
?>
Here, the numeric keys also need to be specified, as if the whole array is treated as an associative array.
As noted elsewhere, the list() operator can be written in array format:
<?php
[0=>$width,1=>$height,2=>$type,3=>$dimensions,'mime'=>$mime]=$data;
?>
petru at fuxspam dot xtremeweb dot ro ¶
6 years ago
This is something I haven't seen in documentation.
Since PHP 7.1, you can use short-hand list unpacking using square brackets, just like short-hand array declaration:
<?php
$foo = ['a', 'b', 'c'];
// short-hand array definition
[$a, $b, $c] = $foo;
echo $a; // displays "a"
// it's same like:
list($x, $y, $z) = $foo;
echo $x; // displays "a"
?>
samraskul at gmail dot com ¶
3 years ago
list($a, $b, $c) = ["blue", "money", 32];
shortcut:
[$a, $b, $c] = ["blue", "money", 32];
Paul Marti ¶
5 years ago
Since 7.1.0, you can use an array directly without list():
<?php
[$test, $test2] = explode(",", "hello, world");
echo $test . $test2; // hello, world
?>
blazej ¶
7 years ago
From PHP Version 7.1 you can specify keys in list(), or its new shorthand [] syntax. This enables destructuring of arrays with non-integer or non-sequential keys.
<?php
$data = [
["id" => 1, "name" => 'Tom'],
["id" => 2, "name" => 'Fred'],
];
// list() style
list("id" => $id1, "name" => $name1) = $data[0];
// [] style
["id" => $id1, "name" => $name1] = $data[0];
// list() style
foreach ($data as list("id" => $id, "name" => $name)) {
// logic here with $id and $name
}
// [] style
foreach ($data as ["id" => $id, "name" => $name]) {
// logic here with $id and $name
}
anthony dot ossent at live dot fr ¶
8 years ago
a simple example of use to swap two variables :
$a = 'hello';
$b = 'world';
list($a, $b) = [$b, $a];
echo $a . ' ' . $b; //display "world hello"
another example :
function getPosition($x, $y, $z)
{
// ... some operations like $x++...
return [$x, $y, $z];
}
list($x, $y, $z) = getPosition($x ,$y, $z);
contato at tobias dot ws ¶
6 years ago
Since PHP 7.1 the [] may now be used as an alternative to the existing list() syntax:
<?php
[$number, $message] = explode('|', '123|Hello World!');
?>
Colin Guthrie ¶
9 years ago
If you want use the undefined behaviour as you might expect it e.g. if you want:
$b = ['a','b']; list($a, $b) = $b;
to result in $a=='a' and $b=='b', then you can just cast $b to an array (even although it already is) to create a copy. e.g.
$b = ['a','b']; list($a, $b) = (array)$b;
and get the expected results.
Dean ¶
8 years ago
UNDOCUMENTED BEHAVIOR:
list($a,$b,$c) = null;
in fact works like:
$a = null; $b = null; $c = null;
...So correspondingly:
list($rows[]) = null;
Will increment count($rows), just as if you had executed $rows[] = null;
Watch out for this (for example) when retrieving entire tables from a database, e.g.
while (list($rows[]) = $mysqlresult->fetch_row());
This will leave an extra 'null' entry as the last element of $rows.
Mardaneus ¶
6 years ago
Unless you specify keys when using list() it expects the array being fed into it to start at 0.
So having the following code will result in a notice level warning "Undefined offset: 0" and variables not filling as expected
<?php
list($c1, $c2, $c3) = array [1 =>'a', 2 => 'b', 3 => 'c'];
var_dump($c1); // NULL
var_dump($c2); // string(1) "a"
var_dump($c3); // string(1) "b"
?>
fredsaavedra at hotmail dot com ¶
4 years ago
Easy way to get actual date and time values in variables.
list($day,$month,$year,$hour,$minute,$second) = explode('-',date('d-m-Y-G-i-s'));
echo "$day-$month-$year $hour".":".$minute.":".$second;
JD ¶
5 years ago
As of PHP 7.3, lists now support array destructuring - see here: https://www.php.net/manual/en/migration73.new-features.php
sergey dot leonidovich dot shevchenko at gmail dot com ¶
3 years ago
['a' => $x, 'b' => $y] = ['a' => 1, 'b' => 2];
echo $x . '-' . $y; // 1-2
