실행시 설정

이 함수의 작동은 php.ini 설정에 영향을 받습니다.

The following table lists and explains the configuration settings provided by the WinCache extension:

WinCache configuration options

이름	기본값	Minimum	Maximum	가변성	변경점
wincache.fcenabled	"1"	"0"	"1"	PHP_INI_ALL	Available as of WinCache 1.0.0
wincache.fcenabledfilter	"NULL"	"NULL"	"NULL"	PHP_INI_SYSTEM	Available as of WinCache 1.0.0
wincache.fcachesize	"24"	"5"	"255"	PHP_INI_SYSTEM	Available as of WinCache 1.0.0
wincache.fcndetect	"1"	"0"	"1"	PHP_INI_SYSTEM	Available as of WinCache 1.1.0
wincache.maxfilesize	"256"	"10"	"2048"	PHP_INI_SYSTEM	Available as of WinCache 1.0.0
wincache.ocenabled	"1"	"0"	"1"	PHP_INI_ALL	Available as of WinCache 1.0.0. Removed as of 2.0.0.0
wincache.ocenabledfilter	"NULL"	"NULL"	"NULL"	PHP_INI_SYSTEM	Available as of WinCache 1.0.0. Removed as of 2.0.0.0
wincache.ocachesize	"96"	"15"	"255"	PHP_INI_SYSTEM	Available as of WinCache 1.0.0. Removed as of 2.0.0.0
wincache.filecount	"4096"	"1024"	"16384"	PHP_INI_SYSTEM	Available as of WinCache 1.0.0
wincache.chkinterval	"30"	"0"	"300"	PHP_INI_SYSTEM	Available as of WinCache 1.0.0
wincache.ttlmax	"1200"	"0"	"7200"	PHP_INI_SYSTEM	Available as of WinCache 1.0.0
wincache.enablecli	0	0	1	PHP_INI_SYSTEM	Available as of WinCache 1.0.0
wincache.ignorelist	NULL	NULL	NULL	PHP_INI_ALL	Available as of WinCache 1.0.0
wincache.namesalt	NULL	NULL	NULL	PHP_INI_SYSTEM	Available as of WinCache 1.0.0
wincache.ucenabled	1	0	1	PHP_INI_SYSTEM	Available as of WinCache 1.1.0
wincache.ucachesize	8	5	85	PHP_INI_SYSTEM	Available as of WinCache 1.1.0
wincache.scachesize	8	5	85	PHP_INI_SYSTEM	Available as of WinCache 1.1.0
wincache.rerouteini	NULL	NULL	NULL	PHP_INI_SYSTEM	Available as of WinCache 1.2.0. Removed as of 1.3.7
wincache.reroute_enabled	1	0	1	PHP_INI_SYSTEM | PHP_INI_PERDIR	Available as of WinCache 1.3.7
wincache.srwlocks	1	0	1	PHP_INI_SYSTEM	Available as of WinCache 1.3.6.3. Removed as of 2.0.0.0
wincache.filemapdir	NULL	NULL	NULL	PHP_INI_SYSTEM	Available as of WinCache 1.3.7.4

PHP_INI_* 모드에 대한 상세와 정의는 Where a configuration setting may be set를 참고하십시오.

위 설정 지시어에 대한 간단한 설명입니다.

wincache.fcenabled boolean

Enables or disables the file cache functionality.

wincache.fcenabledfilter string

Defines a comma-separated list of IIS web site identifiers where file cache should be enabled or disabled. This setting works in conjunction with wincache.fcenabled: if wincache.fcenabled is set to 1, then the sites listed in the wincache.fcenabledfilter will have the file cache turned off; if wincache.fcenabled is set to 0, then the sites listed in the wincache.fcenabledfilter will have the file cache turned on.

wincache.fcachesize integer

Defines the maximum memory size (in megabytes) that is allocated for the file cache. If the total size of all the cached files exceeds the value specified in this setting, then most stale files will be removed from the file cache.

wincache.fcndetect boolean

Enables or disables the file change notification detection functionality. If file change notification is supported then it will be used to refresh the opcode and file cache entries as soon as the corresponding files are modified on a file system. If file change notification is not supported, for example when using network file shares, then wincache will poll for file changes at regular time intervals specified by wincache.chkinterval.

wincache.maxfilesize integer

Defines the maximum allowed size (in kilobytes) for a single file to be cached. If a file size exceeds the specified value, the file will not be cached. This setting applies to the file cache only.

wincache.ocenabled boolean

Warning

This option has been REMOVED as of 2.0.0.0

Enables or disables the opcode cache functionality

wincache.ocenabledfilter string

Warning

This option has been REMOVED as of 2.0.0.0

Defines a comma-separated list of IIS web site identifiers where opcode cache should be enabled or disabled. This setting works in conjunction with wincache.ocenabled: if wincache.ocenabled is set to 1, then the sites listed in the wincache.ocenabledfilter will have the opcode cache turned off; if wincache.ocenabled is set to 0, then the sites listed in the wincache.ocenabledfilter will have the opcode cache turned on.

wincache.ocachesize integer

Warning

This option has been REMOVED as of 2.0.0.0

Defines the maximum memory size (in megabytes) that is allocated for the opcode cache. If the cached opcode size exceeds the specified value, then most stale opcode will be removed from the cache. Note that the opcode cache size must be at least 3 times bigger than file cache size. If that is not the case the opcode cache size will be automatically increased.

wincache.filecount integer

Defines how many files are expected to be cached by the extension, so that appropriate memory size is allocated at the startup time. If the number of files exceeds the specified value, the WinCache will re-allocate more memory as needed.

wincache.chkinterval integer

Defines how often (in seconds) the extension checks for file changes in order to refresh the cache. Setting it to 0 will disable the refreshing of the cache. The file changes will not be reflected in the cache unless the cache entry for that file is removed by scavenger or IIS application pool is recycled or wincache_refresh_if_changed function is called.

wincache.ttlmax integer

Defines the maximum time to live (in seconds) for a cached entry without being used. Setting it to 0 will disable the cache scavenger, so the cached entries will never be removed from the cache during the lifetime of the IIS worker process.

wincache.enablecli boolean

Defines if caching is enabled when PHP is running in command line (CLI) mode.

wincache.ignorelist string

Defines a list of files that should not be cached by the extension. The files list is specified by using file names only, separated by the pipe symbol - "|".

Example #1 wincache.ignorelist example

wincache.ignorelist = "index.php|misc.php|admin.php"

wincache.namesalt string

Defines a string that will be used when naming the extension specific objects that are stored in shared memory. This is used to avoid conflicts that may be caused if other applications within an IIS worker process tries to access shared memory. The length of the namesalt string cannot exceed 8 characters.

wincache.ucenabled boolean

Enables or disables the user cache functionality.

wincache.ucachesize integer

Defines the maximum memory size in megabytes that is allocated for the user cache. If the total size of variables stored in the user cache exceeds the specified value, then the most stale variables will be removed from the cache.

wincache.scachesize integer

Defines the maximum memory size in megabytes that is allocated for the session cache. If the total size of data stored in the session cache exceeds the specified value, then the most stale data will be removed from the cache.

wincache.rerouteini string

Warning

This option has been REMOVED as of 1.3.7. See wincache.reroute_enabled for similar functionality as of 1.3.7.

Specifies an absolute or a relateve path to the reroute.ini file that contains the list of PHP functions whose implementation should be replaced with the WinCache function equivalents. If a relative path is specified then it is assumed to be relative to the location of php-cgi.exe file.

wincache.reroute_enabled boolean

Enables or disables the rerouting of certain file I/O functions through the file cache.

wincache.srwlocks boolean

Warning

This option has been REMOVED as of 2.0.0.0

Enables or disables the use of shared reader/writer locks. Disabling is useful when troubleshooting deadlock conditions in WinCache.

wincache.filemapdir string

Specifies an absolute path to a directory where WinCache will store the temporary files used for shared memory segments. This directory must be on the local machine and not on a networked file system. If the directory is not specified, WinCache will use the Windows System Page File for all shared memory segments.